Experiment investigation on visualization and operating characteristics of closed loop plate oscillating heat pipe with parallel channels

Using ethanol or acetone as the working fluid, visualization of oscillations in steady state was observed visually by high-speed cameras, and temperature oscillating and heat transfer characteristics of closed-loop plate oscillating heat pipe with parallel channels(POHP-PC) were experimentally investigated by varying liquid filled ratios(50%, 70%, 85%), section scales(1 mm×1 mm and 1 mm×1.5 mm), inclination angles, working fluids and heating inputs. It was found that during operating there was mixed flow consisting of plug flow and annular flow in channels of oscillating heat pipe at steady-state. There was an equilibrium position for working fluid of condenser during oscillating, and periodic oscillations occurred up and down in the vicinity of equilibrium position. With heat input increasing, equilibrium position rose slowly as a result of vapor pressure of evaporation.Evaporation temperature oscillating amplitude possessed a trend of small-large-small and frequency trend was of small-large during steady-state. It may be generally concluded that temperature, whether evaporator or condenser, fluctuated sharply or rose continuously when oscillating heat pipe coming to dry burning state. Simultaneously, it was found that temperature difference of cooling water possibly dropped with heat input rising during dry burning state. Thermal resistance of No. 2 with acetone was lower than that of No. 1 during experiments, but No. 2 achieving heat transfer limit was earlier than No. 1. However, with ethanol, thermal resistance of No. 1 and No. 2 were similar with the heating input less than 110-120 W and filling ratios of 50% and 70%. And with filling ratio of 85%, heating transfer performance of No. 2 was better compared to No. 1 during all the experiments.

Multi-objective Collaborative Optimization for Scheduling Aircraft Landing on Closely Spaced Parallel Runways Based on Genetic Algorithms

A scheduling model of closely spaced parallel runways for arrival aircraft was proposed,with multi-objections of the minimum flight delay cost,the maximum airport capacity,the minimum workload of air traffic controller and the maximum fairness of airlines′scheduling.The time interval between two runways and changes of aircraft landing order were taken as the constraints.Genetic algorithm was used to solve the model,and the model constrained unit delay cost of the aircraft with multiple flight tasks to reduce its delay influence range.Each objective function value or the fitness of particle unsatisfied the constrain condition would be punished.Finally,one domestic airport hub was introduced to verify the algorithm and the model.The results showed that the genetic algorithm presented strong convergence and timeliness for solving constraint multi-objective aircraft landing problem on closely spaced parallel runways,and the optimization results were better than that of actual scheduling.

Based on point merge for paired approach sequencing on closely spaced parallel runways

The paired approach is a kind of efficiency approach to closely spaced parallel runways(CSPRs),and the point merge system has the powerful interval management function,which is effective to realize the converge of traffic flows from different approach directions.In order to improve the operation efficiency of the airport terminal area,a model of paired approach sequencing based on point merge is proposed to investigate the problem of increasing the operation capacity of the closely spaced parallel runways.Taking the minimum average flight delay time as the objective,the flight distance on sequencing legs,wake turbulence separation and paired approach safety separation as constraints,the genetic algorithm is used to optimize the paired approach sequencing of arrival flights.Taking the closely parallel runways of Shanghai Hongqiao International Airport run south as an example,the point merge program is designed and the effect of model was analyzed.The results show that after optimization,the average delay time and average landing time are reduced by 40.6%and 51.8%respectively,the capacity of the closely spaced parallel runways are 1.1 times higher than the actual,the flight uptime rate can reach 100%.It is concluded that the proposed model is feasible,which can effectively reduce delay times and alleviate congestion in terminal areas.