The rationality of powertrain parameter design has a significant influence on the traction performance and economic performance of electric tractor.At present,researches on powertrain parameter design mainly focus on ...The rationality of powertrain parameter design has a significant influence on the traction performance and economic performance of electric tractor.At present,researches on powertrain parameter design mainly focus on electric vehicles,and electric agricultural machinery draw much less attention.Therefore,a method of powertrain parameter matching and optimization design for electric tractor was proposed in this paper,which was based on dual-motor coupling drive mode.The particle swarm optimization(PSO)algorithm based on mixed penalty function was used for parameter optimization.Parameter optimization design was programmed using MATLAB.A simulation dynamic model with optimization design variables of electric tractor powertrain was established based on MATLAB/Simulink.Compared with the simulation results before optimization,the objective functions were optimized and the traction performance of electric tractor was improved,which indicated the effectiveness of the proposed method.展开更多
Usually extended two-phase capillary pressures are used in three-phase simulations,because three-phase capillary pressures are not possible or hard to measure.In this work three-phase capillary pressure surfaces are c...Usually extended two-phase capillary pressures are used in three-phase simulations,because three-phase capillary pressures are not possible or hard to measure.In this work three-phase capillary pressure surfaces are created by at pore network model.The input parameters to this network model are found by matching two-phase capillary pressure curves.This matching is done with a slightly modified EnKF routine.Tables with three-phase capillary pressures are created and used as input to flow simulations.展开更多
In view of the characteristics of warehouse or freight yard carrying out transfer and loading conditions,the performance parameter matching of the power system of an electric transfer vehicle was studied,and the drivi...In view of the characteristics of warehouse or freight yard carrying out transfer and loading conditions,the performance parameter matching of the power system of an electric transfer vehicle was studied,and the driving motor and power battery of the key components of the vehicle were reasonably selected.Cruise software was used to simulate the loading process of the vehicle.The results show that the performance design of the power system of the electric transport vehicle and its key components is reasonable,meeting the requirements of maximum speed,climbing performance and starting driving performance,and providing a reference and credible basis for the design of the power system of the vehicle.展开更多
By using the weight function method,the matching parameters of the half discrete Hilbert type multiple integral inequality with a non-homogeneous kernel K(n,||x||ρ,m)=G(nλ1||x||ρmλ,2)are discussed,some equivalent ...By using the weight function method,the matching parameters of the half discrete Hilbert type multiple integral inequality with a non-homogeneous kernel K(n,||x||ρ,m)=G(nλ1||x||ρmλ,2)are discussed,some equivalent conditions of the optimal matching parameter are established,and the expression of the optimal constant factor is obtained.Finally,their applications in operator theory are considered.展开更多
Particle accelerators are devices used for research in scientific problems such as high energy and nuclear physics.In a particle accelerator, the shape of particle beam envelope is changed dynamically along the forwar...Particle accelerators are devices used for research in scientific problems such as high energy and nuclear physics.In a particle accelerator, the shape of particle beam envelope is changed dynamically along the forward direction. Thus, this reference direction can be considered as an auxiliary "time" beam axis. In this paper, the optimal beam matching control problem for a low energy transport system in a charged particle accelerator is considered. The beam matching procedure is formulated as a finite "time" dynamic optimization problem, in which the Kapchinsky-Vladimirsky(K-V) coupled envelope equations model beam dynamics. The aim is to drive any arbitrary initial beam state to a prescribed target state, as well as to track reference trajectory as closely as possible, through the control of the lens focusing strengths in the beam matching channel. We first apply the control parameterization method to optimize lens focusing strengths, and then combine this with the time-scaling transformation technique to further optimize the drift and lens length in the beam matching channel. The exact gradients of the cost function with respect to the decision parameters are computed explicitly through the state sensitivity-based analysis method. Finally, numerical simulations are illustrated to verify the effectiveness of the proposed approach.展开更多
A pure electric vehicle driven by dual motors is taken as the research object and the driving scheme of the driving motor is improved to increase the transmission efficiency of existing electric vehicles.Based on the ...A pure electric vehicle driven by dual motors is taken as the research object and the driving scheme of the driving motor is improved to increase the transmission efficiency of existing electric vehicles.Based on the architecture of the transmission system,we propose vehicle performance parameters and performance indexes of a pure electric vehicle,a time-sharing driving strategy of dual motors.First,the parameters of the battery,motor,and transmission system are matched.Then,the electric vehicle transmission model is built in Amesim and the control strategy is designed in Simulink.With the optimization goal of improving the vehicle’s dynamic performance and driving range,the optimal parameters are determined through analysis.Finally,the characteristics of the motor are tested on the bench.The results show that the energy-saving potential of the timesharing driven double motor is higher,and the driving mileage of the double motor drive is increased by 4%.展开更多
The global characteristics of a fingerprint image such as the ridge shape and ridge topology are often ignored in most automatic fingerprint verification system. In this paper, a new representative method based on B-S...The global characteristics of a fingerprint image such as the ridge shape and ridge topology are often ignored in most automatic fingerprint verification system. In this paper, a new representative method based on B-Spline curve is proposed to address this problem. The resultant B-Spline curves can represent the global characteristics completely and the curves are analyzable and precise. An algorithm is also proposed to extract the curves from the fingerprint image. In addition to preserve the most information of the fingerprint image, the knot-points number of the B-Spline curve is reduced to minimum in this algorithm. At the same time, the influence of the fingerprint image noise is discussed. In the end, an example is given to demonstrate the effectiveness of the representation method. Key words fingerprint matching - B-spline interpolation - knots detection - parameterization - boundary condition CLC number TP 391. 41 Foundation item: Supported by the National Natural Science Foundation of China (90200400) and Wuhan Technology Committee (991009185G)Biography: Ruan Ke (1979-), male, Master candidate, research direction: digital image processing.展开更多
基金We acknowledge that this working was financially supported by the Thirteenth Five-Year National Key R&D Plan(2016YFD0701001).
文摘The rationality of powertrain parameter design has a significant influence on the traction performance and economic performance of electric tractor.At present,researches on powertrain parameter design mainly focus on electric vehicles,and electric agricultural machinery draw much less attention.Therefore,a method of powertrain parameter matching and optimization design for electric tractor was proposed in this paper,which was based on dual-motor coupling drive mode.The particle swarm optimization(PSO)algorithm based on mixed penalty function was used for parameter optimization.Parameter optimization design was programmed using MATLAB.A simulation dynamic model with optimization design variables of electric tractor powertrain was established based on MATLAB/Simulink.Compared with the simulation results before optimization,the objective functions were optimized and the traction performance of electric tractor was improved,which indicated the effectiveness of the proposed method.
文摘Usually extended two-phase capillary pressures are used in three-phase simulations,because three-phase capillary pressures are not possible or hard to measure.In this work three-phase capillary pressure surfaces are created by at pore network model.The input parameters to this network model are found by matching two-phase capillary pressure curves.This matching is done with a slightly modified EnKF routine.Tables with three-phase capillary pressures are created and used as input to flow simulations.
文摘In view of the characteristics of warehouse or freight yard carrying out transfer and loading conditions,the performance parameter matching of the power system of an electric transfer vehicle was studied,and the driving motor and power battery of the key components of the vehicle were reasonably selected.Cruise software was used to simulate the loading process of the vehicle.The results show that the performance design of the power system of the electric transport vehicle and its key components is reasonable,meeting the requirements of maximum speed,climbing performance and starting driving performance,and providing a reference and credible basis for the design of the power system of the vehicle.
基金Supported by National Natural Science Foundation of China(Grant No.12071491)Guangzhou Science and Technology Plan Project(Grant No.202102080177).
文摘By using the weight function method,the matching parameters of the half discrete Hilbert type multiple integral inequality with a non-homogeneous kernel K(n,||x||ρ,m)=G(nλ1||x||ρmλ,2)are discussed,some equivalent conditions of the optimal matching parameter are established,and the expression of the optimal constant factor is obtained.Finally,their applications in operator theory are considered.
基金supported by the National Natural Science Foundation of China(61703114,61673126,61703217,U1701261)the Science and Technology Plan Project of Guangdong(2014B090907010,2015B010131014)
文摘Particle accelerators are devices used for research in scientific problems such as high energy and nuclear physics.In a particle accelerator, the shape of particle beam envelope is changed dynamically along the forward direction. Thus, this reference direction can be considered as an auxiliary "time" beam axis. In this paper, the optimal beam matching control problem for a low energy transport system in a charged particle accelerator is considered. The beam matching procedure is formulated as a finite "time" dynamic optimization problem, in which the Kapchinsky-Vladimirsky(K-V) coupled envelope equations model beam dynamics. The aim is to drive any arbitrary initial beam state to a prescribed target state, as well as to track reference trajectory as closely as possible, through the control of the lens focusing strengths in the beam matching channel. We first apply the control parameterization method to optimize lens focusing strengths, and then combine this with the time-scaling transformation technique to further optimize the drift and lens length in the beam matching channel. The exact gradients of the cost function with respect to the decision parameters are computed explicitly through the state sensitivity-based analysis method. Finally, numerical simulations are illustrated to verify the effectiveness of the proposed approach.
基金Supported by Beijing Institute of Technology Research Fund Program for Young Scholars(3030011181911)the National Natural Science Foundation of China(520020025)。
文摘A pure electric vehicle driven by dual motors is taken as the research object and the driving scheme of the driving motor is improved to increase the transmission efficiency of existing electric vehicles.Based on the architecture of the transmission system,we propose vehicle performance parameters and performance indexes of a pure electric vehicle,a time-sharing driving strategy of dual motors.First,the parameters of the battery,motor,and transmission system are matched.Then,the electric vehicle transmission model is built in Amesim and the control strategy is designed in Simulink.With the optimization goal of improving the vehicle’s dynamic performance and driving range,the optimal parameters are determined through analysis.Finally,the characteristics of the motor are tested on the bench.The results show that the energy-saving potential of the timesharing driven double motor is higher,and the driving mileage of the double motor drive is increased by 4%.
文摘The global characteristics of a fingerprint image such as the ridge shape and ridge topology are often ignored in most automatic fingerprint verification system. In this paper, a new representative method based on B-Spline curve is proposed to address this problem. The resultant B-Spline curves can represent the global characteristics completely and the curves are analyzable and precise. An algorithm is also proposed to extract the curves from the fingerprint image. In addition to preserve the most information of the fingerprint image, the knot-points number of the B-Spline curve is reduced to minimum in this algorithm. At the same time, the influence of the fingerprint image noise is discussed. In the end, an example is given to demonstrate the effectiveness of the representation method. Key words fingerprint matching - B-spline interpolation - knots detection - parameterization - boundary condition CLC number TP 391. 41 Foundation item: Supported by the National Natural Science Foundation of China (90200400) and Wuhan Technology Committee (991009185G)Biography: Ruan Ke (1979-), male, Master candidate, research direction: digital image processing.
