A Generalized Hankel Transformation Derived by Parametrized Entangled State Representations

Using the parametrized entangled state representations we have found a generalized Hankel transformationwith the integral kernel being a combination of Bessel functions.This generalized Hankel transformation corresponds tothe appropriate quantum mechanical representation transformation.

Differences between lower extremity joint running kinetics captured by marker-based and markerless systems were speed dependent

Background:The development of computer vision technology has enabled the use of markerless movement tracking for biomechanical analysis.Recent research has reported the feasibility of markerless systems in motion analysis but has yet to fully explore their utility for capturing faster movements,such as running.Applied studies using markerless systems in clinical and sports settings are still lacking.Thus,the present study compared running biomechanics estimated by marker-based and markerless systems.Given running speed not only affects sports performance but is also associated with clinical injury prevention,diagnosis,and rehabilitation,we aimed to investigate the effects of speed on the comparison of estimated lower extremity joint moments and powers between markerless and marker-based technologies during treadmill running as a concurrent validating study.Methods:Kinematic data from marker-based/markerless technologies were collected,along with ground reaction force data,from 16 young adults running on an instrumented treadmill at 3 speeds:2.24 m/s,2.91 m/s,and 3.58 m/s(5.0 miles/h,6.5 miles/h,and 8.0 miles/h).Sagittal plane moments and powers of the hip,knee,and ankle were calculated by inverse dynamic methods.Time series analysis and statistical parametric mapping were used to determine system differences.Results:Compared to the marker-based system,the markerless system estimated increased lower extremity joint kinetics with faster speed during the swing phase in most cases.Conclusion:Despite the promising application of markerless technology in clinical settings,systematic markerless overestimation requires focused attention.Based on segment pose estimations,the centers of mass estimated by markerless technologies were farther away from the relevant distal joint centers,which led to greater joint moments and powers estimates by markerless vs.marker-based systems.The differences were amplified by running speed.

Enhanced picosecond terahertz wave generation based on cascade effects in a terahertz parametric generator

Enhanced terahertz wave generation via a Stokes cascade process has been demonstrated using picosecond pulse pumped terahertz parametric generation at 1 kHz repetition rate.Clear cascade saturation of terahertz output was observed,and the corresponding cascade-Stokes spectra were analyzed.The maximum terahertz wave average power was 22μW under a pump power of 30 W,whereas the maximum power conversion efficiency was 8×10^(-7)under a pump power of 21 W.The THz power fluctuation was measured to be about 1%in 20 min.This THz parametric source with a relatively stable output is suitable for a variety of practical applications.

Nonlinear vibration of Timoshenko FG porous sandwich beams subjected to a harmonic axial load

In this study,the instability and bifurcation diagrams of a functionally graded(FG)porous sandwich beam on an elastic,viscous foundation which is influenced by an axial load,are investigated with an analytical attitude.To do so,the Timoshenko beam theory is utilized to take the shear deformations into account,and the nonlinear Von-Karman approach is adopted to acquire the equations of motion.Then,to turn the partial differential equations(PDEs)into ordinary differential equations(ODEs)in the case of equations of motion,the method of Galerkin is employed,followed by the multiple time scale method to solve the resulting equations.The impact of parameters affecting the response of the beam,including the porosity distribution,porosity coefficient,temperature increments,slenderness,thickness,and damping ratios,are explicitly discussed.It is found that the parameters mentioned above affect the bifurcation points and instability of the sandwich porous beams,some of which,including the effect of temperature and porosity distribution,are less noticeable.

Active Fault Tolerant Nonsingular Terminal Sliding Mode Control for Electromechanical System Based on Support Vector Machine

Effective fault diagnosis and fault-tolerant control method for aeronautics electromechanical actuator is concerned in this paper.By borrowing the advantages of model-driven and data-driven methods,a fault tolerant nonsingular terminal sliding mode control method based on support vector machine(SVM)is proposed.A SVM is designed to estimate the fault by off-line learning from small sample data with solving convex quadratic programming method and is introduced into a high-gain observer,so as to improve the state estimation and fault detection accuracy when the fault occurs.The state estimation value of the observer is used for state reconfiguration.A novel nonsingular terminal sliding mode surface is designed,and Lyapunov theorem is used to derive a parameter adaptation law and a control law.It is guaranteed that the proposed controller can achieve asymptotical stability which is superior to many advanced fault-tolerant controllers.In addition,the parameter estimation also can help to diagnose the system faults because the faults can be reflected by the parameters variation.Extensive comparative simulation and experimental results illustrate the effectiveness and advancement of the proposed controller compared with several other main-stream controllers.

Parametric instability in the pure-quartic nonlinear Schrödinger equation

We study the nonlinear stage of modulation instability(MI)in the non-intergrable pure-quartic nonlinear Schrödinger equation where the fourth-order dispersion is modulated periodically.Using the three-mode truncation,we reveal the complex recurrence of parametric resonance(PR)breathers,where each recurrence is associated with two oscillation periods(PR period and internal oscillation period).The nonlinear stage of parametric instability admits the maximum energy exchange between the spectrum sidebands and central mode occurring outside the MI gain band.

Parametric resonance of axially functionally graded pipes conveying pulsating fluid

Based on the generalized Hamilton's principle,the nonlinear governing equation of an axially functionally graded(AFG)pipe is established.The non-trivial equilibrium configuration is superposed by the modal functions of a simply supported beam.Via the direct multi-scale method,the response and stability boundary to the pulsating fluid velocity are solved analytically and verified by the differential quadrature element method(DQEM).The influence of Young's modulus gradient on the parametric resonance is investigated in the subcritical and supercritical regions.In general,the pipe in the supercritical region is more sensitive to the pulsating excitation.The nonlinearity changes from hard to soft,and the non-trivial equilibrium configuration introduces more frequency components to the vibration.Besides,the increasing Young's modulus gradient improves the critical pulsating flow velocity of the parametric resonance,and further enhances the stability of the system.In addition,when the temperature increases along the axial direction,reducing the gradient parameter can enhance the response asymmetry.This work further complements the theoretical analysis of pipes conveying pulsating fluid.

Overshoot phenomena:Observation and simulation

High-power O-mode radio waves can excite artificial instabilities in the F region,according to experiments conducted at the European Incoherent Scatter Science Association(EISCAT)heating facility.The main instabilities include the parametric decay instability(PDI),oscillating two-stream instability(OTSI),and thermal parametric instability(TPI).The PDI and OTSI not only compete with each other,but also compete with the TPI,leading to a two-stage overshoot phenomenon:a miniovershoot occurs on a millisecond time scale after pump-on,followed by the main overshoot.We gain insight into the miniovershoot via a generalized Zakharov model,whereas the main overshoot can be observed as an enhanced plasma line overshoot phenomenon in incoherent scatter radar spectra.We can also observe that the zero-frequency ion line exists only in the initial heating period after a cold start and that the upshifted and downshifted ion lines behave irregularly in the spectra.The simulation results show that competition between the PDI and OTSI leads to an initial peak,which we named the pre-miniovershoot.The following processes,namely ion density caviton generation,and collapse and cascade in the development of the PDI,contribute to the miniovershoot phenomenon.

Impact of cancer diagnosis on life expectancy by area-level socioeconomic groups in New South Wales, Australia: a population-based study

Objective: Improvement in cancer survival over recent decades has not been accompanied by a narrowing of socioeconomic disparities. This study aimed to quantify the loss of life expectancy(LOLE) resulting from a cancer diagnosis and examine disparities in LOLE based on area-level socioeconomic status(SES).Methods: Data were collected for all people between 50 and 89 years of age who were diagnosed with cancer, registered in the NSW Cancer Registry between 2001 and 2019, and underwent mortality follow-up evaluations until December 2020. Flexible parametric survival models were fitted to estimate the LOLE by gender and area-level SES for 12 common cancers.Results: Of 422,680 people with cancer, 24% and 18% lived in the most and least disadvantaged areas, respectively. Patients from the most disadvantaged areas had a significantly greater average LOLE than patients from the least disadvantaged areas for cancers with high survival rates, including prostate [2.9 years(95% CI: 2.5±3.2 years) vs. 1.6 years(95% CI: 1.3±1.9 years)] and breast cancer [1.6 years(95% CI: 1.4±1.8 years) vs. 1.2 years(95% CI: 1.0±1.4 years)]. The highest average LOLE occurred in males residing in the most disadvantaged areas with pancreatic [16.5 years(95% CI: 16.1±16.8 years) vs. 16.2 years(95% CI: 15.7±16.7 years)] and liver cancer [15.5 years(95% CI: 15.0±16.0 years) vs. 14.7 years(95% CI: 14.0±15.5 years)]. Females residing in the least disadvantaged areas with thyroid cancer [0.9 years(95% CI: 0.4±1.4 years) vs. 0.6 years(95% CI: 0.2±1.0 years)] or melanoma [0.9 years(95% CI: 0.8±1.1 years) vs. 0.7 years(95% CI: 0.5±0.8 years)] had the lowest average LOLE.Conclusions: Patients from the most disadvantaged areas had the highest LOLE with SES-based differences greatest for patients diagnosed with cancer at an early stage or cancers with higher survival rates, suggesting the need to prioritise early detection and reduce treatment-related barriers and survivorship challenges to improve life expectancy.

Nonlinear dynamics of a circular curved cantilevered pipe conveying pulsating fluid based on the geometrically exact model

Due to the novel applications of flexible pipes conveying fluid in the field of soft robotics and biomedicine,the investigations on the mechanical responses of the pipes have attracted considerable attention.The fluid-structure interaction(FSI)between the pipe with a curved shape and the time-varying internal fluid flow brings a great challenge to the revelation of the dynamical behaviors of flexible pipes,especially when the pipe is highly flexible and usually undergoes large deformations.In this work,the geometrically exact model(GEM)for a curved cantilevered pipe conveying pulsating fluid is developed based on the extended Hamilton's principle.The stability of the curved pipe with three different subtended angles is examined with the consideration of steady fluid flow.Specific attention is concentrated on the large-deformation resonance of circular pipes conveying pulsating fluid,which is often encountered in practical engineering.By constructing bifurcation diagrams,oscillating shapes,phase portraits,time traces,and Poincarémaps,the dynamic responses of the curved pipe under various system parameters are revealed.The mean flow velocity of the pulsating fluid is chosen to be either subcritical or supercritical.The numerical results show that the curved pipe conveying pulsating fluid can exhibit rich dynamical behaviors,including periodic and quasi-periodic motions.It is also found that the preferred instability type of a cantilevered curved pipe conveying steady fluid is mainly in the flutter of the second mode.For a moderate value of the mass ratio,however,a third-mode flutter may occur,which is quite different from that of a straight pipe system.

Harmonic balance simulation of the influence of component uniformity and reliability on the performance of a Josephson traveling wave parametric amplifier

A Josephson traveling wave parametric amplifier(JTWPA),which is a quantum-limited amplifier with high gain and large bandwidth,is the core device of large-scale measurement and control systems for quantum computing.A typical JTWPA consists of thousands of Josephson junctions connected in series to form a transmission line and hundreds of shunt LC resonators periodically loaded along the line for phase matching.Because the variation of these capacitors and inductors can be detrimental to their high-frequency characteristics,the fabrication of a JTWPA typically necessitates precise processing equipment.To guide the fabrication process and further improve the design for manufacturability,it is necessary to understand how each electronic component affects the amplifier.In this paper,we use the harmonic balance method to conduct a comprehensive study on the impact of nonuniformity and fabrication yield of the electronic components on the performance of a JTWPA.The results provide insightful and scientific guidance for device design and fabrication processes.

不同装载条件下小型渔船参数横摇的非定常RANS CFD仿真

Fishing boats have unique features that make them prone to changing loading conditions.When the boat leaves the port,the empty fish tank gradually fills up during fishing operations which may result in parametric roll(PR).This dangerous phenomenon that can lead to capsizing.The present study aims to understand better the behaviour of parametric roll in fishing boats and its relation to changing loading conditions.The study considers the effects of displacement and the GM/KM ratio on parametric roll,as well as the longitudinal flare distribution at the waterline.Two assessments to detect the parametric roll occurrence in early stage were carried out by using the level 1 assessment of parametric roll based on the Second Generation of Intact Stability criteria(SGIS)from International maritime Organisation(IMO)and the Susceptibility criteria of Parametric roll from the American Bureau of Shipping(ABS).Then,the CFD method is used to predict the amplitude of the parametric roll phenomenon.The results provide important insights to fishing vessel operators on how to manage loading conditions to maintain stability and avoid hazardous situations.By following the guidelines outlined in this study,fishing boats can operate more safely and efficiently,reducing the risk of accidents and improving the overall sustainability of the fishing industry.

Multi-Objective Optimization of Aluminum Alloy Electric Bus Frame Connectors for Enhanced Durability

The widespread adoption of aluminumalloy electric buses,known for their energy efficiency and eco-friendliness,faces a challenge due to the aluminum frame’s susceptibility to deformation compared to steel.This issue is further exacerbated by the stringent requirements imposed by the flammability and explosiveness of batteries,necessitating robust frame protection.Our study aims to optimize the connectors of aluminum alloy bus frames,emphasizing durability,energy efficiency,and safety.This research delves into Multi-Objective Coordinated Optimization(MCO)techniques for lightweight design in aluminum alloy bus body connectors.Our goal is to enhance lightweighting,reinforce energy absorption,and improve deformation resistance in connector components.Three typical aluminum alloy connectors were selected and a design optimization platform was built for their MCO using a variety of software and methods.Firstly,through three-point bending experiments and finite element analysis on three types of connector components,we identified optimized design parameters based on deformation patterns.Then,employing Optimal Latin hypercube design(OLHD),parametric modeling,and neural network approximation,we developed high-precision approximate models for the design parameters of each connector component,targeting energy absorption,mass,and logarithmic strain.Lastly,utilizing the Archive-based Micro Genetic Algorithm(AMGA),Multi-Objective Particle Swarm Optimization(MOPSO),and Non-dominated SortingGenetic Algorithm(NSGA2),we explored optimized design solutions for these joint components.Subsequently,we simulated joint assembly buckling during bus rollover crash scenarios to verify and analyze the optimized solutions in three-point bending simulations.Each joint component showcased a remarkable 30%–40%mass reduction while boosting energy absorption.Our design optimization method exhibits high efficiency and costeffectiveness.Leveraging contemporary automation technology,the design optimization platform developed in this study is poised to facilitate intelligent optimization of lightweight metal components in future applications.

Modularized and Parametric Modeling Technology for Finite Element Simulations of Underground Engineering under Complicated Geological Conditions

The surrounding geological conditions and supporting structures of underground engineering are often updated during construction,and these updates require repeated numerical modeling.To improve the numerical modeling efficiency of underground engineering,a modularized and parametric modeling cloud server is developed by using Python codes.The basic framework of the cloud server is as follows:input the modeling parameters into the web platform,implement Rhino software and FLAC3D software to model and run simulations in the cloud server,and return the simulation results to the web platform.The modeling program can automatically generate instructions that can run the modeling process in Rhino based on the input modeling parameters.The main modules of the modeling program include modeling the 3D geological structures,the underground engineering structures,and the supporting structures as well as meshing the geometric models.In particular,various cross-sections of underground caverns are crafted as parametricmodules in themodeling program.Themodularized and parametric modeling program is used for a finite element simulation of the underground powerhouse of the Shuangjiangkou Hydropower Station.This complicatedmodel is rapidly generated for the simulation,and the simulation results are reasonable.Thus,this modularized and parametric modeling program is applicable for three-dimensional finite element simulations and analyses.

Meta-Auto-Decoder:a Meta-Learning-Based Reduced Order Model for Solving Parametric Partial Differential Equations

Many important problems in science and engineering require solving the so-called parametric partial differential equations(PDEs),i.e.,PDEs with different physical parameters,boundary conditions,shapes of computational domains,etc.Typical reduced order modeling techniques accelerate the solution of the parametric PDEs by projecting them onto a linear trial manifold constructed in the ofline stage.These methods often need a predefined mesh as well as a series of precomputed solution snapshots,and may struggle to balance between the efficiency and accuracy due to the limitation of the linear ansatz.Utilizing the nonlinear representation of neural networks(NNs),we propose the Meta-Auto-Decoder(MAD)to construct a nonlinear trial manifold,whose best possible performance is measured theoretically by the decoder width.Based on the meta-learning concept,the trial manifold can be learned in a mesh-free and unsupervised way during the pre-training stage.Fast adaptation to new(possibly heterogeneous)PDE parameters is enabled by searching on this trial manifold,and optionally fine-tuning the trial manifold at the same time.Extensive numerical experiments show that the MAD method exhibits a faster convergence speed without losing the accuracy than other deep learning-based methods.

Prediction of rock fragmentation in a fiery seam of an open-pit coal mine in India

Spontaneous combustion of coal increases the temperature in adjoining overburden strata of coal seams and poses a challenge when loading blastholes.This condition,known as hot-hole blasting,is dangerous due to the increased possibility of premature explosions in loaded blastholes.Thus,it is crucial to load the blastholes with an appropriate amount of explosives within a short period to avoid premature detonation caused by high temperatures of blastholes.Additionally,it will help achieve the desired fragment size.This study tried to ascertain the most influencial variables of mean fragment size and their optimum values adopted for blasting in a fiery seam.Data on blast design,rock mass,and fragmentation of 100 blasts in fiery seams of a coal mine were collected and used to develop mean fragmentation prediction models using soft computational techniques.The coefficient of determination(R^(2)),root mean square error(RMSE),mean absolute error(MAE),mean square error(MSE),variance account for(VAF)and coefficient of efficiency in percentage(CE)were calculated to validate the results.It indicates that the random forest algorithm(RFA)outperforms the artificial neural network(ANN),response surface method(RSM),and decision tree(DT).The values of R^(2),RMSE,MAE,MSE,VAF,and CE for RFA are 0.94,0.034,0.027,0.001,93.58,and 93.01,respectively.Multiple parametric sensitivity analyses(MPSAs)of the input variables showed that the Schmidt hammer rebound number and spacing-to-burden ratio are the most influencial variables for the blast fragment size.The analysis was finally used to define the best blast design variables to achieve optimum fragment size from blasting.The optimum factor values for RFA of S/B,ld/B and ls/ld are 1.03,1.85 and 0.7,respectively.

Measuring Causal Effect with ARDL-BART: A Macroeconomic Application

Modeling dynamic systems with linear parametric models usually suffer limitation which affects forecasting performance and policy implications. This paper advances a non-parametric autoregressive distributed lag model that employs a Bayesian additive regression tree (BART). The performance of the BART model is compared with selection models like Lasso, Elastic Net, and Bayesian networks in simulation experiments with linear and non-linear data generating processes (DGP), and on US macroeconomic time series data. The results show that the BART model is quite competitive against the linear parametric methods when the DGP is linear, and outperforms the competing methods when the DGP is non-linear. The empirical results suggest that the BART estimators are generally more efficient than the traditional linear methods when modeling and forecasting macroeconomic time series.

Evaluation of Rainfall Tendency for the Twentieth Century over Indira Sagar Region in Central India

The study investigates long-term changes in annual and seasonal rainfall patterns in the Indira Sagar Region of Madhya Pradesh, India, from 1901 to 2010. Agriculture sustainability, food supply, natural resource development, and hydropower system reliability in the region rely heavily on monsoon rainfall. Monthly rainfall data from three stations (East Nimar, Barwani, and West Nimar) were analyzed. Initially, the pre-whitening method was applied to eliminate serial correlation effects from the rainfall data series. Subsequently, statistical trends in annual and seasonal rainfall were assessed using both parametric (student-t test) and non-parametric tests [Mann-Kendall, Sen’s slope estimator, and Cumulative Sum (CUSUM)]. The magnitude of the rainfall trend was determined using Theil-Sen’s slope estimator. Spatial analysis of the Mann-Kendall test on an annual basis revealed a statistically insignificant decreasing trend for Barwani and East Nimar and an increasing trend for West Nimar. On a seasonal basis, the monsoon season contributes a significant percentage (88.33%) to the total annual rainfall. The CUSUM test results indicated a shift change detection in annual rainfall data for Barwani in 1997, while shifts were observed in West and East Nimar stations in 1929. These findings offer valuable insights into regional rainfall behavior, aiding in the planning and management of water resources and ecological systems.

Super-Fast Approximation Algorithms Using Classical Fourier Tools

In the author’s recent publications, a parametric system biorthogonal to the corresponding segment of the exponential Fourier system was unusually effective. On its basis, it was discovered that knowledge of a finite number of Fourier coefficients of function f from an infinite-dimensional set of elementary functions allows f to be accurately restored (the phenomenon of over-convergence). Below, parametric biorthogonal systems are constructed for classical trigonometric Fourier series, and the corresponding phenomena of over-convergence are discovered. The decisive role here was played by representing the space L2 as an orthogonal sum of two corresponding subspaces. As a result, fast parallel algorithms for reconstructing a function from its truncated trigonometric Fourier series are proposed. The presented numerical experiments confirm the high efficiency of these convergence accelerations for smooth functions. In conclusion, the main results of the work are summarized, and some prospects for the development and generalization of the proposed approaches are discussed.

REDUCED BASIS METHOD FOR PARAMETRIZED ELLIPTIC ADVECTION-REACTION PROBLEMS

In this work we consider the Reduced Basis method for the solution of parametrized advection-reaction partial differential equations. For the generation of the basis we adopt a stabilized finite element method and we define the Reduced Basis method in the ＂primal- dual＂ formulation for this stabilized problem. We provide a priori Reduced Basis error estimates and we discuss the effects of the finite element approximation on the Reduced Basis error. We propose an adaptive algorithm, based on the a posteriori Reduced Basis error estimate, for the selection of the sample sets upon which the basis are built; the idea leading this algorithm is the minimization of the computational costs associated with the solution of the Reduced Basis problem. Numerical tests demonstrate the efficiency, in terms of computational costs, of the ＂primal-dual＂ Reduced Basis approach with respect to an ＂only primal＂ one. Parametrized advection-reaction partial differential equations, Reduced Basis method, ＂primal-dual＂ reduced basis approach, Stabilized finite element method, a posteriori error estimation.