H-steel all-bolted connection steel frame structures with heat preservation and decoration composite wall boards were investigated and the seismic performances of three scaled specimens were studied.The failure modes,...H-steel all-bolted connection steel frame structures with heat preservation and decoration composite wall boards were investigated and the seismic performances of three scaled specimens were studied.The failure modes,hysteresis curves,bearing capacity,ductility,energy dissipation capacity,stiffness degradation and strain distribution were discussed.The calculation method of structural theoretical internal force was presented.The results showed that the overall structural seismic performance was better,and the structural ductility met the demands of elastic-plastic inter-story drift angle for seismic design.The H-steel weak-axis connection structure obtained better energy dissipation capacity,and its bearing capacity and stiffness were slightly different from the strong-axis connection.The heat preservation and decoration performance of composite wallboard and the all-bolted connection of the steel frame realized prefabrication during the whole construction period.The plastic hinge of the steel beam can be moved outwards because of the L-angles,which effectively avoids stress concentration in joint areas and expands the plastic hinge range.The errors between the theoretical structural capacity calculated by the plastic analysis method and the test results were within 2.44%.In addition,structural failure mechanisms and bearing capacities were verified by the finite element(FE)analysis,and the effects of the main parameters on the structures were investigated.The FE verification results were the same as in the test.The research results provide theoretical support and technical guidance for the application of thermal insulation and decorative composite wall panels in H-shaped steel all-bolted steel frames.展开更多
In recent years,scientists have become increasingly concerned in recycling electronic trash,particularly waste printed circuit boards(WPCBs).Previous research has indicated that the presence of Cu impacts the pyrolysi...In recent years,scientists have become increasingly concerned in recycling electronic trash,particularly waste printed circuit boards(WPCBs).Previous research has indicated that the presence of Cu impacts the pyrolysis of WPCBs.However,there may be errors in the experimental results,as printed circuit boards(PCBs)with copper and those without copper are produced differently.For this experiment,we blended copper powder with PCB nonmetallic resin powder in various ratios to create the samples.The apparent kinetics and pyrolysis properties of four resin powders with varying copper concentrations were compared using nonisothermal thermogravimetric analysis(TG)and thermal pyrolysis-gas chromatography mass spectrometry(Py-GC/MS).From the perspective of kinetics,the apparent activation energy of the resin powder in the pyrolysis reaction shows a rise(0.1<a<0.2)-stable(0.2<a<0.4)-accelerated increase(0.4<a<0.8)-decrease(0.8<a<0.9)process.After adding copper powder,the apparent activation energy changes more obviously when(0.2<a<0.4).In the early stage of the pyrolysis reaction(0.1<a<0.6),the apparent activation energy is reduced,but when a?0.8,it is much higher than that of the resin sample without copper.Additionally,it is discovered using thermogravimetric analysis and Py-GC/MS that copper shortens the temperature range of the primary pyrolysis reaction and prevents the creation of compounds containing bromine.This inhibition will raise the temperature at which compounds containing bromine first form,and it will keep rising as the copper level rises.The majority of the circuit board molecules have lower bond energies when copper is present,according to calculations performed using the Gaussian09 software,which promotes the pyrolysis reaction.展开更多
Through exploring the effects of low pH on the composite system of desulfurization gypsum(DG)enhanced by melamine-formaldehyde resin(MF),it is found that the inducing of sulfate-ion,in contrast to chloride and oxalate...Through exploring the effects of low pH on the composite system of desulfurization gypsum(DG)enhanced by melamine-formaldehyde resin(MF),it is found that the inducing of sulfate-ion,in contrast to chloride and oxalate ions,favors the longitudinal growth of the crystalline form of the hydration product,which was relatively simple and had the highest length to width(L/D)ratio.At the same time,MF can also improve L/D ratio of gypsum hydration products,which favors the formation of hydrated whiskers.Finally,in a composite system composed of hemihydrate gypsum,MF,and glass fibers,when dilute sulfuric acid was used to regulate pH=3-4,the tight binding formed among the components of the composite system compared to pH=5-6.The hydration product of gypsum adheres tightly to glass fiber surface and produces a good cross-linking and binding effect with MF.The flexural strength,compressive strength,elastic modulus,and water absorption of the desulphurized gypsum composite board is 22.7 MPa,39.8 MPa,5608 MPa,and 1.8%,respectively.展开更多
The Milan Gobi area of the Golmud-Korla Railway in northwest China is located in the lower dispersal area of the mountain pass and has strong winds with evident double wind direction characteristics.This study introdu...The Milan Gobi area of the Golmud-Korla Railway in northwest China is located in the lower dispersal area of the mountain pass and has strong winds with evident double wind direction characteristics.This study introduced a novel sand fence deployment technique,termed‘folded linear deployment',designed to position the sand fence orthogonally to the two predominant wind directions for optimal protection.This study used wind tunnel and field tests to evaluate the wind and sand flow characteristics,as well as the windproof and sandresistant performance of folded linear HDPE(Highdensity polyethylene)board sand fences.The results suggest that the airflow around the fence creates clear zoning characteristics.The deceleration area on the BSF(backwind side of the sand fence)is much larger than that on the DSF(downwind side of the sand fence).Thus,sand particles are primarily deposited on the BSF.At different wind speeds,the airflow at 2 and 5 h on the DSF is not disturbed.The WSP(wind speed profile)presents a logarithmic distribution.The airflow is disturbed at 1-20 h on the BSF,and the WSP gradually deviates from the logarithmic law.However,as the airflow moves away from the fence,the WSP gradually approaches a logarithmic distribution.Meanwhile,the WPE(windproof efficiency)and SRE(sand-resistant efficiency)of the sand fence exceed 80%.In addition,the results of wind tunnel tests are compared with those of field tests.The overall dispersion is good,and the best dispersion is found at z/H=2.00,indicating good agreement between the two test results.This study provides a scientific basis for the design of sand hazard control measures,similar to the railway project in the Gobi Gale area.展开更多
The Golmud-Korla Railway in the Gobi area faces operational challenges due to sand hazards,caused by strong and variable winds.This study addresses these challenges by conducting wind tunnel tests to evaluate the prot...The Golmud-Korla Railway in the Gobi area faces operational challenges due to sand hazards,caused by strong and variable winds.This study addresses these challenges by conducting wind tunnel tests to evaluate the protective benefits of High Density Polyethylene(HDPE)board sand fences,focusing on their orientation relative to various wind directions(referred to as'wind angle').This study found that the size of the low-velocity zone on the leeward side of the sand fences(LSF)expanded with an increase in the wind angle(WA).At 1H(the height of the sand fence)and 2H positions on the LSF,the wind speed profiles(WSP)exhibited a segmented logarithmic growth,constrained by Z=H at varying WAs.The efficacy of the sand fence in obstructing airflow escalated as WA increased.The size of the WA has a significant impact on the protective efficiency of HDPE board sand fences.Furthermore,compared to typical sandy surfaces,the rate of sand transport across the Gobi surface diminishes more slowly with height,attributed to the gravel's rebound effect.This phenomenon allows some sand particles to bypass the fences,rendering them less effective at blocking wind and trapping sand than in sandy environments.This paper offers scientific evidence supporting the practical use and enhancement of HDPE board sand fences in varied wind conditions.展开更多
This research aims to measure the current gender representation in membership of boards of directors,and to study the factors affecting the presence of women on boards.The results of the study will support the decisio...This research aims to measure the current gender representation in membership of boards of directors,and to study the factors affecting the presence of women on boards.The results of the study will support the decision makers and policy makers at all levels by providing knowledge that contributes to bridging the current gap in participation of women boards.The methodology used in this research is the descriptive analytical approach,which relies on quantitative methods in the process of collecting and analyzing data.This study represents the boards of directors in the three sectors(public,private,and non-profit)in the Kingdom of Saudi Arabia,The study sample contained 350 targets,where a random sample of 150 people in the public sector,100 people in the private sector,and 100 people in the non-profit sector were selected.The research result found that the majority of the responses believe that the lack of experience and training,and social factors,are the most impact areas of explaining the reasons for the existence of a gap in women’s membership in boards of directors in the three sectors.And the most important reasons for the existence of a gender gap in board membership are:there is no statutory minimum percentage for women’s representation on boards of directors,and scarcity of female competencies in general,and the lack of women occupying leadership positions.展开更多
This study tackles current environmental challenges by developing innovative and eco-friendly particle boards utilizing sorghum husk, combined with recycled expanded polystyrene (EPS). This dual eco-responsible approa...This study tackles current environmental challenges by developing innovative and eco-friendly particle boards utilizing sorghum husk, combined with recycled expanded polystyrene (EPS). This dual eco-responsible approach valorizes sorghum husk, often deemed agricultural waste, and repurposes EPS, a plastic waste, thus contributing to CO2 emission reduction and effective waste management. The manufacturing process involves dissolving recycled polystyrene within a solvent to create a binder, which is then mixed with sorghum husk and cold-pressed into composite boards. The study explores the impact of two particle sizes (fine and coarse) and two different concentrations of the recycled EPS binder. Results demonstrate significant variations in the boards’ mechanical properties, displaying a range of Modulus of Rupture (MOR) from 0.84 MPa to 3.85 MPa, and Modulus of Elasticity (MOE) spanning from 658.13 MPa to 1313.25 MPa, influenced by the binder concentration and particle size. These characteristics suggest that the boards can be effectively used in various construction applications, including interior decoration, false ceilings, and potentially for furniture and door manufacturing when combined with appropriate coatings. This study not only exemplifies the valorization of plastic and agricultural wastes but also offers a practical, localized solution to global climate change challenges by promoting sustainable construction materials.展开更多
The fire hazard of lithium-ion batteries(LIBs)modules is extremely serious due to their high capacity.Moreover,once a battery catches fire,it can easily result in a fire of the entire LIBs modules.In this work,a sandw...The fire hazard of lithium-ion batteries(LIBs)modules is extremely serious due to their high capacity.Moreover,once a battery catches fire,it can easily result in a fire of the entire LIBs modules.In this work,a sandwich structure composite thermal insulation(STI)board(copper//silica dioxide aerogel//copper)with the advantages of low thermal conductivity(0.031 W m-1K-1),low surface radiation emissivity(0.1)and good thermal convection inhibition effect has been designed.The thermal runaway(TR)occurrence time of adjacent LIBs increases from 1384 s to more than 6 h+due to the protection of STI board.No TR propagation occurs within LIBs modules with protect of a STI board when a battery catches fire.The ultra-strong-heat-shielding mechanism of STI board has been revealed.The TR propagation of LIBs modules has been insulated effectively by STI board through reducing the heat transfer of convection,conduction and radiation.The air flow rate between the heater and LIBs and radiant heat absorbed by LIBs decrease by 63.5%and 35.1%with protection of STI board,respectively.A high temperature difference inside the STI board is also formed.This work provides direction for the designing of safe thermal insulation board for LIBs modules.展开更多
Five types of polyurea elastomers were synthesized by changing the isocyanate component and the mechanical properties of polyurea materials were measured. Fiber-reinforced cement boards(FRCB)strengthened by polyurea w...Five types of polyurea elastomers were synthesized by changing the isocyanate component and the mechanical properties of polyurea materials were measured. Fiber-reinforced cement boards(FRCB)strengthened by polyurea with different formulations were processed, and a series of experiments were carried out on the specimens with gas explosion devices. The results showed that the conventional mechanical properties of different types of polyureas had their own advantages. Based on the gas explosion overpressure criterion, the blast resistances of reinforced plates were quantitatively evaluated,and the best polyurea was selected to guide the formulation design. The three typical failure modes of polyurea-reinforced FRCBs were flexural, shear, and flexural-shear failure. Dynamic thermodynamics and shock wave spectral analysis revealed that the polyurea did not undergo a glass transition in the gas explosion tests but retained its elastic properties, allowing it to effectively wrap the fragments formed by the brittle substrates.展开更多
Purpose: This study takes advantage of newly released journal metrics to investigate whether local journals with more qualified boards have lower acceptance rates, based on data from 219 Turkish national journals and ...Purpose: This study takes advantage of newly released journal metrics to investigate whether local journals with more qualified boards have lower acceptance rates, based on data from 219 Turkish national journals and 2,367 editorial board members.Design/methodology/approach: This study argues that journal editors can signal their scholarly quality by publishing in reputable journals. Conversely, editors publishing inside articles in affiliated national journals would send negative signals. The research predicts that high(low) quality editorial boards will conduct more(less) selective evaluation and their journals will have lower(higher) acceptance rates. Based on the publication strategy of editors, four measures of board quality are defined: Number of board inside publications per editor(INSIDER), number of board Social Sciences Citation Index publications per editor(SSCI), inside-to-SSCI article ratio(ISRA), and board citation per editor(CITATION). Predictions are tested by correlation and regression analysis.Findings: Low-quality board proxies(INSIDER, ISRA) are positively, and high-quality board proxies(SSCI, CITATION) are negatively associated with acceptance rates. Further, we find that receiving a larger number of submissions, greater women representation on boards, and Web of Science and Scopus(WOSS) coverage are associated with lower acceptance rates. Acceptance rates for journals range from 12% to 91%, with an average of 54% and a median of 53%. Law journals have significantly higher average acceptance rate(68%) than other journals, while WOSS journals have the lowest(43%). Findings indicate some of the highest acceptance rates in Social Sciences literature, including competitive Business and Economics journals that traditionally have low acceptance rates. Limitations: Research relies on local context to define publication strategy of editors. Findings may not be generalizable to mainstream journals and core science countries where emphasis on research quality is stronger and editorial selection is based on scientific merit.Practical implications: Results offer useful insights into editorial management of national journals and allow us to make sense of local editorial practices. The importance of scientific merit for selection to national journal editorial boards is particularly highlighted for sound editorial evaluation of submitted manuscripts.Originality/value: This is the first attempt to document a significant relation between acceptance rates and editorial board publication behavior.展开更多
For Printed Circuit Board(PCB)surface defect detection,traditional detection methods mostly focus on template matching-based reference method and manual detections,which have the disadvantages of low defect detection ...For Printed Circuit Board(PCB)surface defect detection,traditional detection methods mostly focus on template matching-based reference method and manual detections,which have the disadvantages of low defect detection efficiency,large errors in defect identification and localization,and low versatility of detectionmethods.In order to furthermeet the requirements of high detection accuracy,real-time and interactivity required by the PCB industry in actual production life.In the current work,we improve the Youonly-look-once(YOLOv4)defect detection method to train and detect six types of PCB small target defects.Firstly,the original Cross Stage Partial Darknet53(CSPDarknet53)backbone network is preserved for PCB defect feature information extraction,and secondly,the original multi-layer cascade fusion method is changed to a single-layer feature layer structure to greatly avoid the problem of uneven distribution of priori anchor boxes size in PCB defect detection process.Then,the K-means++clustering method is used to accurately cluster the anchor boxes to obtain the required size requirements for the defect detection,which further improves the recognition and localization of small PCB defects.Finally,the improved YOLOv4 defect detection model is compared and analyzed on PCB dataset with multi-class algorithms.The experimental results show that the average detection accuracy value of the improved defect detection model reaches 99.34%,which has better detection capability,lower leakage rate and false detection rate for PCB defects in comparison with similar defect detection algorithms.展开更多
The existing systems sustained with the investments made require more automation and digital transformation with the continuous advancement of tech-nology.The aviation industry is a sector that is open to more automat...The existing systems sustained with the investments made require more automation and digital transformation with the continuous advancement of tech-nology.The aviation industry is a sector that is open to more automation and digi-tal transformation,mainly because of the intense competition and the analysis of a large variety of data.The long duration of operations in current airline processes and some processflows cause customer dissatisfaction and cost increase.In this study,the boarding process,which is one of the operational processes of airline transportation and is open to improvement,was discussed.The classical boarding process has been redesigned using Internet of Things technology a model called Boarding 4.0 was created.With Boarding 4.0,it is aimed to design a process where passengers can take their time before boarding more efficiently.In the study,the sub-processes of the Boarding 4.0 model,other processes that the sub-processes interact with,their activities,and data exchange passenger move-ments during the activities are explained in detail.Compared to the classical boarding process and Boarding 4.0 with the fuzzy ahp technique,it has been shown that boarding 4.0 is more advantageous and passenger movement times can be reduced during boarding.As a result of the evaluation made with the fuzzy ahp,it was determined that boarding 4.0 is more advantageous than the classical boarding process.In addition,when the total time of the sub-activities in the board-ing process is calculated,boarding activities for a passenger take 50 min with the classic boarding process and 20 min with Boarding 4.0.Thus,when Boarding 4.0 is used,the passenger gains 30 min.Furthermore,when the calculation is made concerning the airport’s current capacity,two passengers are hosted with the clas-sical boarding process,whilefive passengers are hosted with Boarding 4.0.This acquisition is significant for airports in terms of efficient use of resources.展开更多
Due to increasing pressure on brand owners and distributors to avoid single use plastics such as plastic bundle packaging, a new bundle packaging that consists of corrugated board only, has been designed. Obviously th...Due to increasing pressure on brand owners and distributors to avoid single use plastics such as plastic bundle packaging, a new bundle packaging that consists of corrugated board only, has been designed. Obviously this new packaging should equally enable transportability. This study compares the transportability of bundles using corrugated board on the one hand and bundles using plastic collation shrink film on the other. In particular, the resistance to varying horizontal inertial forces is compared experimentally. All tested bundle packagings of corrugated board perform well above expectations and significantly better than shrink film packaging. All additional requirements regarding marketing, durability, consumer convenience, …are met.展开更多
The quality of printed circuit board(PCB)micro-hole processing directly determines the stability of the inner and outer circuit connections.Micro-hole drilling technology is a typical method for PCB micro-hole process...The quality of printed circuit board(PCB)micro-hole processing directly determines the stability of the inner and outer circuit connections.Micro-hole drilling technology is a typical method for PCB micro-hole processing.The problem of optimal control of its drilling force is one of the main factors affecting the quality of micro-hole machining.To address this problem,the thrust forces and torques in PCB drilling were first modeled and analyzed,and the corresponding prediction models were established.The drilling force analysis was carried out through the micro-hole drilling experiment,the specific cutting energy under different feed rates was calculated,the influence of the size effect was clarified,and the accuracy of the prediction model was verified.The result shows that during the drilling of glass fiber cloth,changes in the material removal mechanism are induced as the feed per revolution is varied.When the feed per revolution is less than the tool edge radius,the glass fiber is not cut by the main cutting edge,but is crushed and broken.When the feed per revolution is greater than the radius of the tool edge,the glass fiber is cut by the main cutting edge.At the same time,the established analytical model can accurately reflect the influence of the size effect on the drilling torque in PCB micro-hole drilling,and the error is within 10%.This method has certain practical application value in controlling PCB micro hole processing quality.展开更多
文摘H-steel all-bolted connection steel frame structures with heat preservation and decoration composite wall boards were investigated and the seismic performances of three scaled specimens were studied.The failure modes,hysteresis curves,bearing capacity,ductility,energy dissipation capacity,stiffness degradation and strain distribution were discussed.The calculation method of structural theoretical internal force was presented.The results showed that the overall structural seismic performance was better,and the structural ductility met the demands of elastic-plastic inter-story drift angle for seismic design.The H-steel weak-axis connection structure obtained better energy dissipation capacity,and its bearing capacity and stiffness were slightly different from the strong-axis connection.The heat preservation and decoration performance of composite wallboard and the all-bolted connection of the steel frame realized prefabrication during the whole construction period.The plastic hinge of the steel beam can be moved outwards because of the L-angles,which effectively avoids stress concentration in joint areas and expands the plastic hinge range.The errors between the theoretical structural capacity calculated by the plastic analysis method and the test results were within 2.44%.In addition,structural failure mechanisms and bearing capacities were verified by the finite element(FE)analysis,and the effects of the main parameters on the structures were investigated.The FE verification results were the same as in the test.The research results provide theoretical support and technical guidance for the application of thermal insulation and decorative composite wall panels in H-shaped steel all-bolted steel frames.
基金supported by the National Key Research and Development Program of China(2018YFC1902504).
文摘In recent years,scientists have become increasingly concerned in recycling electronic trash,particularly waste printed circuit boards(WPCBs).Previous research has indicated that the presence of Cu impacts the pyrolysis of WPCBs.However,there may be errors in the experimental results,as printed circuit boards(PCBs)with copper and those without copper are produced differently.For this experiment,we blended copper powder with PCB nonmetallic resin powder in various ratios to create the samples.The apparent kinetics and pyrolysis properties of four resin powders with varying copper concentrations were compared using nonisothermal thermogravimetric analysis(TG)and thermal pyrolysis-gas chromatography mass spectrometry(Py-GC/MS).From the perspective of kinetics,the apparent activation energy of the resin powder in the pyrolysis reaction shows a rise(0.1<a<0.2)-stable(0.2<a<0.4)-accelerated increase(0.4<a<0.8)-decrease(0.8<a<0.9)process.After adding copper powder,the apparent activation energy changes more obviously when(0.2<a<0.4).In the early stage of the pyrolysis reaction(0.1<a<0.6),the apparent activation energy is reduced,but when a?0.8,it is much higher than that of the resin sample without copper.Additionally,it is discovered using thermogravimetric analysis and Py-GC/MS that copper shortens the temperature range of the primary pyrolysis reaction and prevents the creation of compounds containing bromine.This inhibition will raise the temperature at which compounds containing bromine first form,and it will keep rising as the copper level rises.The majority of the circuit board molecules have lower bond energies when copper is present,according to calculations performed using the Gaussian09 software,which promotes the pyrolysis reaction.
文摘Through exploring the effects of low pH on the composite system of desulfurization gypsum(DG)enhanced by melamine-formaldehyde resin(MF),it is found that the inducing of sulfate-ion,in contrast to chloride and oxalate ions,favors the longitudinal growth of the crystalline form of the hydration product,which was relatively simple and had the highest length to width(L/D)ratio.At the same time,MF can also improve L/D ratio of gypsum hydration products,which favors the formation of hydrated whiskers.Finally,in a composite system composed of hemihydrate gypsum,MF,and glass fibers,when dilute sulfuric acid was used to regulate pH=3-4,the tight binding formed among the components of the composite system compared to pH=5-6.The hydration product of gypsum adheres tightly to glass fiber surface and produces a good cross-linking and binding effect with MF.The flexural strength,compressive strength,elastic modulus,and water absorption of the desulphurized gypsum composite board is 22.7 MPa,39.8 MPa,5608 MPa,and 1.8%,respectively.
基金financially supported by the Chang Jiang Scholar and Innovation Team Development Plan of China(IRT_15R29)the Basic Research Innovation Group Project of Gansu Province,China(21JR7RA347)the Natural Science Foundation of Gansu Province,China(20JR10RA231)。
文摘The Milan Gobi area of the Golmud-Korla Railway in northwest China is located in the lower dispersal area of the mountain pass and has strong winds with evident double wind direction characteristics.This study introduced a novel sand fence deployment technique,termed‘folded linear deployment',designed to position the sand fence orthogonally to the two predominant wind directions for optimal protection.This study used wind tunnel and field tests to evaluate the wind and sand flow characteristics,as well as the windproof and sandresistant performance of folded linear HDPE(Highdensity polyethylene)board sand fences.The results suggest that the airflow around the fence creates clear zoning characteristics.The deceleration area on the BSF(backwind side of the sand fence)is much larger than that on the DSF(downwind side of the sand fence).Thus,sand particles are primarily deposited on the BSF.At different wind speeds,the airflow at 2 and 5 h on the DSF is not disturbed.The WSP(wind speed profile)presents a logarithmic distribution.The airflow is disturbed at 1-20 h on the BSF,and the WSP gradually deviates from the logarithmic law.However,as the airflow moves away from the fence,the WSP gradually approaches a logarithmic distribution.Meanwhile,the WPE(windproof efficiency)and SRE(sand-resistant efficiency)of the sand fence exceed 80%.In addition,the results of wind tunnel tests are compared with those of field tests.The overall dispersion is good,and the best dispersion is found at z/H=2.00,indicating good agreement between the two test results.This study provides a scientific basis for the design of sand hazard control measures,similar to the railway project in the Gobi Gale area.
基金financially supported by the National Natural Science Foundation of China (42461011, 42071014)the Fellowship of the China Postdoctoral Science Foundation (2021M703466)
文摘The Golmud-Korla Railway in the Gobi area faces operational challenges due to sand hazards,caused by strong and variable winds.This study addresses these challenges by conducting wind tunnel tests to evaluate the protective benefits of High Density Polyethylene(HDPE)board sand fences,focusing on their orientation relative to various wind directions(referred to as'wind angle').This study found that the size of the low-velocity zone on the leeward side of the sand fences(LSF)expanded with an increase in the wind angle(WA).At 1H(the height of the sand fence)and 2H positions on the LSF,the wind speed profiles(WSP)exhibited a segmented logarithmic growth,constrained by Z=H at varying WAs.The efficacy of the sand fence in obstructing airflow escalated as WA increased.The size of the WA has a significant impact on the protective efficiency of HDPE board sand fences.Furthermore,compared to typical sandy surfaces,the rate of sand transport across the Gobi surface diminishes more slowly with height,attributed to the gravel's rebound effect.This phenomenon allows some sand particles to bypass the fences,rendering them less effective at blocking wind and trapping sand than in sandy environments.This paper offers scientific evidence supporting the practical use and enhancement of HDPE board sand fences in varied wind conditions.
文摘This research aims to measure the current gender representation in membership of boards of directors,and to study the factors affecting the presence of women on boards.The results of the study will support the decision makers and policy makers at all levels by providing knowledge that contributes to bridging the current gap in participation of women boards.The methodology used in this research is the descriptive analytical approach,which relies on quantitative methods in the process of collecting and analyzing data.This study represents the boards of directors in the three sectors(public,private,and non-profit)in the Kingdom of Saudi Arabia,The study sample contained 350 targets,where a random sample of 150 people in the public sector,100 people in the private sector,and 100 people in the non-profit sector were selected.The research result found that the majority of the responses believe that the lack of experience and training,and social factors,are the most impact areas of explaining the reasons for the existence of a gap in women’s membership in boards of directors in the three sectors.And the most important reasons for the existence of a gender gap in board membership are:there is no statutory minimum percentage for women’s representation on boards of directors,and scarcity of female competencies in general,and the lack of women occupying leadership positions.
文摘This study tackles current environmental challenges by developing innovative and eco-friendly particle boards utilizing sorghum husk, combined with recycled expanded polystyrene (EPS). This dual eco-responsible approach valorizes sorghum husk, often deemed agricultural waste, and repurposes EPS, a plastic waste, thus contributing to CO2 emission reduction and effective waste management. The manufacturing process involves dissolving recycled polystyrene within a solvent to create a binder, which is then mixed with sorghum husk and cold-pressed into composite boards. The study explores the impact of two particle sizes (fine and coarse) and two different concentrations of the recycled EPS binder. Results demonstrate significant variations in the boards’ mechanical properties, displaying a range of Modulus of Rupture (MOR) from 0.84 MPa to 3.85 MPa, and Modulus of Elasticity (MOE) spanning from 658.13 MPa to 1313.25 MPa, influenced by the binder concentration and particle size. These characteristics suggest that the boards can be effectively used in various construction applications, including interior decoration, false ceilings, and potentially for furniture and door manufacturing when combined with appropriate coatings. This study not only exemplifies the valorization of plastic and agricultural wastes but also offers a practical, localized solution to global climate change challenges by promoting sustainable construction materials.
基金the support from the National Science and Technology Major Project(J2019-VIII-00100171)the National Natural Science Foundation of China(51991352,51973203)+3 种基金the China Postdoctoral Special Funding(2019TQ0309)the China Postdoctoral Science Foundation(2020M671904)the Fundamental Research Funds for the Central Universities(WK2320000057)the University of Synergy Innovation Program of Anhui Province(GXXT-2020-079)。
文摘The fire hazard of lithium-ion batteries(LIBs)modules is extremely serious due to their high capacity.Moreover,once a battery catches fire,it can easily result in a fire of the entire LIBs modules.In this work,a sandwich structure composite thermal insulation(STI)board(copper//silica dioxide aerogel//copper)with the advantages of low thermal conductivity(0.031 W m-1K-1),low surface radiation emissivity(0.1)and good thermal convection inhibition effect has been designed.The thermal runaway(TR)occurrence time of adjacent LIBs increases from 1384 s to more than 6 h+due to the protection of STI board.No TR propagation occurs within LIBs modules with protect of a STI board when a battery catches fire.The ultra-strong-heat-shielding mechanism of STI board has been revealed.The TR propagation of LIBs modules has been insulated effectively by STI board through reducing the heat transfer of convection,conduction and radiation.The air flow rate between the heater and LIBs and radiant heat absorbed by LIBs decrease by 63.5%and 35.1%with protection of STI board,respectively.A high temperature difference inside the STI board is also formed.This work provides direction for the designing of safe thermal insulation board for LIBs modules.
基金funded by National Natural Science Foundation of China(No.12002392).
文摘Five types of polyurea elastomers were synthesized by changing the isocyanate component and the mechanical properties of polyurea materials were measured. Fiber-reinforced cement boards(FRCB)strengthened by polyurea with different formulations were processed, and a series of experiments were carried out on the specimens with gas explosion devices. The results showed that the conventional mechanical properties of different types of polyureas had their own advantages. Based on the gas explosion overpressure criterion, the blast resistances of reinforced plates were quantitatively evaluated,and the best polyurea was selected to guide the formulation design. The three typical failure modes of polyurea-reinforced FRCBs were flexural, shear, and flexural-shear failure. Dynamic thermodynamics and shock wave spectral analysis revealed that the polyurea did not undergo a glass transition in the gas explosion tests but retained its elastic properties, allowing it to effectively wrap the fragments formed by the brittle substrates.
文摘Purpose: This study takes advantage of newly released journal metrics to investigate whether local journals with more qualified boards have lower acceptance rates, based on data from 219 Turkish national journals and 2,367 editorial board members.Design/methodology/approach: This study argues that journal editors can signal their scholarly quality by publishing in reputable journals. Conversely, editors publishing inside articles in affiliated national journals would send negative signals. The research predicts that high(low) quality editorial boards will conduct more(less) selective evaluation and their journals will have lower(higher) acceptance rates. Based on the publication strategy of editors, four measures of board quality are defined: Number of board inside publications per editor(INSIDER), number of board Social Sciences Citation Index publications per editor(SSCI), inside-to-SSCI article ratio(ISRA), and board citation per editor(CITATION). Predictions are tested by correlation and regression analysis.Findings: Low-quality board proxies(INSIDER, ISRA) are positively, and high-quality board proxies(SSCI, CITATION) are negatively associated with acceptance rates. Further, we find that receiving a larger number of submissions, greater women representation on boards, and Web of Science and Scopus(WOSS) coverage are associated with lower acceptance rates. Acceptance rates for journals range from 12% to 91%, with an average of 54% and a median of 53%. Law journals have significantly higher average acceptance rate(68%) than other journals, while WOSS journals have the lowest(43%). Findings indicate some of the highest acceptance rates in Social Sciences literature, including competitive Business and Economics journals that traditionally have low acceptance rates. Limitations: Research relies on local context to define publication strategy of editors. Findings may not be generalizable to mainstream journals and core science countries where emphasis on research quality is stronger and editorial selection is based on scientific merit.Practical implications: Results offer useful insights into editorial management of national journals and allow us to make sense of local editorial practices. The importance of scientific merit for selection to national journal editorial boards is particularly highlighted for sound editorial evaluation of submitted manuscripts.Originality/value: This is the first attempt to document a significant relation between acceptance rates and editorial board publication behavior.
基金This work was funded by the Natural Science Research Project of Higher Education Institutions in Jiangsu Province(No.20KJA520007)Min Zhang receives the grant and the URLs to sponsors’websites are http://jyt.jiangsu.gov.cn/.
文摘For Printed Circuit Board(PCB)surface defect detection,traditional detection methods mostly focus on template matching-based reference method and manual detections,which have the disadvantages of low defect detection efficiency,large errors in defect identification and localization,and low versatility of detectionmethods.In order to furthermeet the requirements of high detection accuracy,real-time and interactivity required by the PCB industry in actual production life.In the current work,we improve the Youonly-look-once(YOLOv4)defect detection method to train and detect six types of PCB small target defects.Firstly,the original Cross Stage Partial Darknet53(CSPDarknet53)backbone network is preserved for PCB defect feature information extraction,and secondly,the original multi-layer cascade fusion method is changed to a single-layer feature layer structure to greatly avoid the problem of uneven distribution of priori anchor boxes size in PCB defect detection process.Then,the K-means++clustering method is used to accurately cluster the anchor boxes to obtain the required size requirements for the defect detection,which further improves the recognition and localization of small PCB defects.Finally,the improved YOLOv4 defect detection model is compared and analyzed on PCB dataset with multi-class algorithms.The experimental results show that the average detection accuracy value of the improved defect detection model reaches 99.34%,which has better detection capability,lower leakage rate and false detection rate for PCB defects in comparison with similar defect detection algorithms.
文摘The existing systems sustained with the investments made require more automation and digital transformation with the continuous advancement of tech-nology.The aviation industry is a sector that is open to more automation and digi-tal transformation,mainly because of the intense competition and the analysis of a large variety of data.The long duration of operations in current airline processes and some processflows cause customer dissatisfaction and cost increase.In this study,the boarding process,which is one of the operational processes of airline transportation and is open to improvement,was discussed.The classical boarding process has been redesigned using Internet of Things technology a model called Boarding 4.0 was created.With Boarding 4.0,it is aimed to design a process where passengers can take their time before boarding more efficiently.In the study,the sub-processes of the Boarding 4.0 model,other processes that the sub-processes interact with,their activities,and data exchange passenger move-ments during the activities are explained in detail.Compared to the classical boarding process and Boarding 4.0 with the fuzzy ahp technique,it has been shown that boarding 4.0 is more advantageous and passenger movement times can be reduced during boarding.As a result of the evaluation made with the fuzzy ahp,it was determined that boarding 4.0 is more advantageous than the classical boarding process.In addition,when the total time of the sub-activities in the board-ing process is calculated,boarding activities for a passenger take 50 min with the classic boarding process and 20 min with Boarding 4.0.Thus,when Boarding 4.0 is used,the passenger gains 30 min.Furthermore,when the calculation is made concerning the airport’s current capacity,two passengers are hosted with the clas-sical boarding process,whilefive passengers are hosted with Boarding 4.0.This acquisition is significant for airports in terms of efficient use of resources.
文摘Due to increasing pressure on brand owners and distributors to avoid single use plastics such as plastic bundle packaging, a new bundle packaging that consists of corrugated board only, has been designed. Obviously this new packaging should equally enable transportability. This study compares the transportability of bundles using corrugated board on the one hand and bundles using plastic collation shrink film on the other. In particular, the resistance to varying horizontal inertial forces is compared experimentally. All tested bundle packagings of corrugated board perform well above expectations and significantly better than shrink film packaging. All additional requirements regarding marketing, durability, consumer convenience, …are met.
基金National Natural Science Foundation of China(No.51805079)Fundamental Research Funds for the Central Universities,China(No.2232021D-15)Shanghai Science and Technology Program(No.20DZ2251400)。
文摘The quality of printed circuit board(PCB)micro-hole processing directly determines the stability of the inner and outer circuit connections.Micro-hole drilling technology is a typical method for PCB micro-hole processing.The problem of optimal control of its drilling force is one of the main factors affecting the quality of micro-hole machining.To address this problem,the thrust forces and torques in PCB drilling were first modeled and analyzed,and the corresponding prediction models were established.The drilling force analysis was carried out through the micro-hole drilling experiment,the specific cutting energy under different feed rates was calculated,the influence of the size effect was clarified,and the accuracy of the prediction model was verified.The result shows that during the drilling of glass fiber cloth,changes in the material removal mechanism are induced as the feed per revolution is varied.When the feed per revolution is less than the tool edge radius,the glass fiber is not cut by the main cutting edge,but is crushed and broken.When the feed per revolution is greater than the radius of the tool edge,the glass fiber is cut by the main cutting edge.At the same time,the established analytical model can accurately reflect the influence of the size effect on the drilling torque in PCB micro-hole drilling,and the error is within 10%.This method has certain practical application value in controlling PCB micro hole processing quality.