Research progress on micro-force measurement of a hydrate particle system

It remains a great challenge to understand the hydrates involved in phenomena in practical oil and gas systems.The adhesion forces between hydrate particles,between hydrate particles and pipe walls,and between hydrate particles and reservoir particles are essential factors that control the behaviors of clathrate hydrates in different applications.In this review,we summarize the typical micro-force measurement apparatus and methods utilized to study hydrate particle systems.In addition,the adhesion test results,the related understandings,and the applied numerical calculation models are systematically discussed.

Measuring the velocity of sand particles in an air/particle two-phase flow:A comparison of several commonly used methods

The velocity of blown sand particles is an important parameter in aeolian movement （a special case of gas particle two-phase flow） and has ever been a topic of interest. At present, several techniques have been applied in measuring velocity of the blown sand particles. This paper reviews the measurement results of several commonly used methods： photoelectric cell method, high-speed photographic method, Particle Dynamics Analyzer （PDA） method and Particle Image Velocimetry （PIV） method. Photoelectric cell method, high-speed photograph method and PDA method are useful in studying the velocity distribution of particles. PIV is a whole-flow-field technique and a useful tool to study the average velocity field in a target area. These methods got some similar results but considerable differences also exist. They have come to similar conclusions on the velocity distributions at a single height but direct measurement results with respect to the velocity distribution very close to the surface are still scarce except some PDA results. The magnitude of measured mean particle velocity differs greatly. The relationship obtained by different methods between mean particle velocity and wind velocity, particle size and possibly other influencing factors also differs considerably. Although several authors have proposed similar power functions to describe the variation with height of the mean particle velocity, the predicted results have wide differences. Each technique is based on some unique principles, and has its advantages and disad- vantages. To make full use of different techniques, a lot of work needs be done to validate them. Developing a reliable technique to measure the velocity of blown particles is still a necessary task in aeolian research.

TWO-DIMENSIONAL PARTICLE IMAGE VELOCIMETRY(PIV) MEASUREMENTS IN A TRANSPARENT CENTRIFUGAL PUMP

A special transparent centrifugal pump is designed. Detailed opticalmeasurements of the flow inside the rotating passages of a five-bladed shroud centrifugal pumpimpeller have been performed by using two-dimensional particle image velocimetry (PIV). The flow issurveyed at three load conditions q_V/q_(Vd) = 0.4, q_V/q_(Vd) = 1.0, q_V/q_(Vd) = 1.5,respectively. As a result, phase averaged PIV velocity vector maps on three planes between hub andshroud of the impeller are presented. At design load, the mean field of relative velocity ispredominantly vane congruent, showing well-behaved flow without separation. The distributions of therelative velocity on different plane along the pump shaft are very different and there is always alow velocity zone near the pressure-side of the blade at both low and design flow rate, but thelow-velocity-zone at the low flow rate is much larger than that at the design one. The studydemonstrates that the PIV technique is efficient in providing reliable and detailed velocity dataover a full impeller passage.

Source apportionment of PM_(2.5)using PMF combined online bulk and single-particle measurements:Contribution of fireworks and biomass burning

Fireworks(FW)could significantly worsen air quality in short term during celebrations.Due to similar tracers with biomass burning(BB),the fast and precise qualification of FW and BB is still challenging.In this study,online bulk and single-particle measurements were combined to investigate the contributions of FW and BB to the overall mass concentrations of PM_(2.5)and specific chemical species by positive matrix factorization(PMF)during the Chinese New Year in Hong Kong in February 2013.With combined information,fresh/aged FW(abundant ^(140)K_(2)NO_(3)^(+)and ^(213)K_(3)SO_(4)^(+)formed from ^(113)K_(2)Cl^(+)discharged by fresh FW)can be extracted from the fresh/aged BB sources,in addition to the Second Aerosol,Vehicles+Road Dust,and Sea Salt factors.The contributions of FW and BB were investigated during three high particle matter episodes influenced by the pollution transported from the Pearl River Delta region.The fresh BB/FW contributed 39.2%and 19.6%to PM_(2.5)during the Lunar Chinese New Year case.However,the contributions of aged FW/BB enhanced in the last two episodes due to the aging process,evidenced by high contributions from secondary aerosols.Generally,the fresh BB/FW showed more significant contributions to nitrate(35.1%and15.0%,respectively)compared with sulfate(25.1%and 5.9%,respectively)and OC(14.8%and11.1%,respectively)on average.In comparison,the aged FW contributed more to sulfate(13.4%).Overall,combining online bulk and single-particle measurement data can combine both instruments’advantages and provide a new perspective for applying source apportionment of aerosols using PMF.

Particle Velocity Sensor and Its Application in Near-Field Noise Scanning Measurement

The Particle Velocity Sensor (PVS) is a kind of acoustic transducer which measures the particle velocity directly with figure-of-eight directivity. This paper proposes a near-field noise scanning technology based on the research of PVS, pressure-particle velocity (P-U) probe, and its application in noise source identification. Firstly, the principle and characteristics of PVS are presented. Secondly, a P-U probe is designed on the basis of PVS development. Finally, the noise measurement experiment for a single source is arranged and conducted. The result shows that the proposed P-U probe performs well in near-field noise source identification and localization.

Lifetime prediction for tantalum capacitors with multiple degradation measures and particle swarm optimization based grey model

A lifetime prediction method for high-reliability tantalum （Ta） capacitors was proposed, based on multiple degradation measures and grey model （GM）. For analyzing performance degradation data, a two-parameter model based on GM was developed. In order to improve the prediction accuracy of the two-parameter model, parameter selection based on particle swarm optimization （PSO） was used. Then, the new PSO-GM（1, 2, co） optimization model was constructed, which was validated experimentally by conducting an accelerated testing on the Ta capacitors. The experiments were conducted at three different stress levels of 85, 120, and 145℃. The results of two experiments were used in estimating the parameters. And the reliability of the Ta capacitors was estimated at the same stress conditions of the third experiment. The results indicate that the proposed method is valid and accurate.

On-line non-intrusive particle size measurement of pulverised fuel through digital imaging

This paper presents the basic principles of particle size measurement and latest industrial results recorded using an innovative optical instrumentation system designed to measure the size distribution of particles in a pneumatic suspension.The system is non-intrusive and cost-effective.A low-cost CCD camera is used to capture images of the particulate flow field,which is illuminated by a low-cost pulsed laser sheet generator.The particle size distribution is then determined by processing the particle images through the use of novel processing algorithms.Experimental results obtained in the past on a small scale particle flow test rig have demonstrated that the system is capable of measuring the size distribution of pneumatically conveyed particles with an accuracy of a few percent.For the present paper results obtained when testing the system at a 4 MW industrial test facility are presented.Comparisons are made with both off-line reference data achieved through sieving and on-line laser diffraction data recorded using an intrusive,extractive,Malvern Instruments system.In general there is good agreement between results when considering the characteristics and limitations of the individual methodologies.The novel imaging system shows itself to be rugged,practical and useful under genuine industrial conditions.

Dust particles in free troposphere over Chinese desert region revealed from balloon borne measurements under calm weather conditions

The Taklamakan Desert in China is one of the major source regions for Asian dust particles.All balloon-borne measurements in this report were carried out in Dunhuang,in the Taklamakan Desert,during calm weather conditions.The aerosol number concentration,size distribution,mass concentration,and horizontal mass flux due to westerly wind were investigated.The measurements were performed on 17 August 2001,17 October 2001,11 January 2002,and 30 April 2002.Five channels(0.3,0.5,0.8,1.2,and 3.6μm in diameter)were used in the Optical Particle Counter for particle measurements.The aerosol number concentration in the winter season(11 January 2002)at 3–5 km was very high.Variation of free-tropospheric aerosols on 30 April 2002 was noticeable.A super-micron range was noticeable in the size distribution of all the measurements.Many variations in temperature and aerosol concentration were found at these inversion points.High values of estimated mass concentration of aerosols were frequently observed in the atmosphere near the ground(i.e.,1–2 km);and interestingly,relatively high concentrations were frequently detected above 2 km from the surface.Wind patterns observed using ERA-Interim data at 500 and 850 hPa showed that westerly winds dominated in the Taklamakan Desert during the observation period.The average horizontal mass flux of background Asian dust due to westerly wind was observed to fall within the range of 58.5–1219 tons km?2 d?1.Vertical profiles of aerosol number concentrations showed that significant transport of aerosols dominated in the westerly region(i.e.,4–7 km).

Measurement and simulation of the two-phase velocity correlation in sudden-expansion gas-particle flows

In this paper the present authors measured the gas-particle two-phase velocity correlation in sudden expansion gas-particle flows with a phase Doppler particle anemometer （PDPA） and simulated the system behavior by using both a Reynolds-averaged Navier-Stokes （RANS） model and a large-eddy simulation （LES）. The results of the measurements yield the axial and radial time-averaged velocities as well as the fluctuation velocities of gas and three particle-size groups （30μm, 50μm, and 95μm） and the gasparticle velocity correlation for 30μm and 50μm particles. From the measurements, theoretical analysis, and simulation, it is found that the two-phase velocity correlation of sudden-expansion flows, like that of jet flows, is less than the gas and particle Reynolds stresses. What distinguishes the two-phase velocity correlations of sudden-expansion flow from those of jet and channel flows is the absence of a clear relationship between the two-phase velocity correlation and particle size in sudden-expansion flows. The measurements, theoretical analysis, and numerical simulation all lead to the above-stated conclusions. Quantitatively, the results of the LES are better than those of the RANS model.

Experimental investigation on PM2.5 particle emission during polishing of granite

Particle emission during manufacturing processes, whether chemical, physical or mechanical can represent a serious danger for environment and for occupational safety. Especially machining processes, particle emission could have an important impact on shop floor air quality and might jeopardise workers’ health. It is therefore important to find ways of reducing the particle emission at the source of manufacturing processes. To do so, there is a need to know the size, the quantity and the distribution of particles produced by processes currently used in industry. In this study, investigations are done to compare the particle emission (PM2.5) when polishing two granites (black and white). The black granite contained low Si concentration (about 10% Si) and the white granite contained high Si concentration (about 50% Si). Particle emission was monitored using the DustTrak II equipment with 2.5 μm impactor. The particle grain size was evaluated using X-ray diffraction techniques. Machining conditions leading to the generation of finer particles were identified.

Correlative Measurements of Fission Fragments and Light Particles（α，p）in Reactions of ^（40）Ar＋^（209）Bi，^（nat）Ag at 25MeV／u

Ｃｏｒｒｅｌａｔｉｖｅ Ｍｅａｓｕｒｅｍｅｎｔｓ ｏｆ Ｆｉｓｓｉｏｎ Ｆｒａｇｍｅｎｔｓ ａｎｄ Ｌｉｇｈｔ Ｐａｒｔｉｃｌｅｓ（α，ｐ）ｉｎ Ｒｅａｃｔｉｏｎｓ ｏｆ ^（４０）Ａｒ＋^（２０９）Ｂｉ，^（ｎａｔ）Ａｇ ａｔ ２５ＭｅＶ／ｕ￥ＷｕＥ?..

Highly Accurate Relations between the Fine Structure Constant and Particle Masses, with Application to Its Cosmological Measurement

Highly accurate algebraic relations between the fine structure constant a and a wide range of particle masses are given, ranging from Δa/a = (2.1 ±0.1)×10-7 to Δa/a = (-2.7 ±0.3 ±0.6)×10-8, and with a very large standard deviation, ranging to Δa/a = -5.5×10-9. The analysis is based on empirical relations that exist among some particle masses, and also on several theoretical assumptions, of which the most significant is that the electromagnetic contribution to the electron’s mass is finite, and given by f ameb, where f is a dimensionless parameter that is shown to be equal to 1.032409810 (63), and where meb is the electron’s “bare mass.” The relations for a and f are homogeneous degree zero in the particle masses. The relations for f in terms of particle masses are found by trial and error. A quadratic equation is given relating a to f and me/mp. This equation is used in the application to cosmological measurements of a, and , where it is shown that, to a few percent accuracy, δa/a ≈ -δμ/μ. This relation can serve to test the validity of measurements of a and μ.

THE STUDY OF CLOUD PHYSICS AND SEEDABILITY OF ARTIFICIAL PRECIPITATION WITH PARTICLE MEASUREMENT SYSTEM

ＴＨＥＳＴＵＤＹＯＦＣＬＯＵＤＰＨＹＳＩＣＳＡＮＤＳＥＥＤＡＢＩＬＩＴＹＯＦＡＲＴＩＦＩＣＩＡＬＰＲＥＣＩＰＩＴＡＴＩＯＮＷＩＴＨＰＡＲＴＩＣＬＥＭＥＡＳＵＲＥＭＥＮＴＳＹＳＴＥＭＹｏｕＬａｉｇａｎｎｇ（游来光）ＷａｎｇＧｕａｎｇｈｅ（王广和）ａｎｄ...

Particle Velocity Measurement for Spherical Wave in Solid

An experimental technique for research on spherical divergent wave propagation in a solid has been developed, in which the source of generating spherical wave is a center initiating explosive charge designed in a mini-spherical shape with yield equivalent to 0.125?g and 0.486?g TNT and a set of circular electromagnetic particle velocity gages is used to record the particle velocity histories. By using the circular electromagnetic particle velocity gages, the signal outputs not only are unattenuated due to the geometrical divergence, but also represent the average of the measured dynamic states of the medium over a circle on the wavefront. The distinctive features of this technique are very useful for the study of spherical divergent wave propagation in a solid, especially in an inhomogeneous solid, and the corresponding material dynamics. Many experimental measurements were conducted in polymethylmethacrylate (PMMA) and granite by means of the technique, and the reproducibility of tests was shown to be good. The measurement technique of the circular electromagnetic particle velocity gages is also suitable to the case of cylindrical wave.

Identification and Quantification of Non-Spherical Particles

In commercial applications of phase Doppler anemometry (PDA), the effectiveness of non sphericity of particles is present and the response of PDA system deviates from the theoretical prediction. In this paper, the statistic characteristics of PDA signal related to irregular particles is analyzed and a method of statistic classification of irregular particles is proposed.It proves that the parameter of PDA signal for irregular particles is an unbiased estimation for spherical ones, the mean of the phase difference is in direct proportion to the mean diameter of particles and the standard deviation of the phase difference increases linearly with the standard deviation of irregular particles. As an application of the identification of irregular objects, fuzzy patterns and similarities of haemocytes are used to recognize and quantify cell samples.The statistic classification of particles is more significant in practice.

像元二分模型参数确定方法对高分一号PMS数据估算植被覆盖度精度的影响

纯裸土像元的NDVIsoil和纯植被像元的NDVIveg是像元二分模型的两个关键参数,影响植被覆盖度遥感估算的精度。该文在基于实测法和置信度法确定像元二分模型参数的基础上,利用国产高分一号PMS数据估算了黄土高原典型区的植被覆盖度,并用实测植被覆盖度数据对两种估算结果进行了验证,最后分析了研究区植被覆盖度的空间分布特征。结果表明:1)利用实测法和置信度法确定的像元二分模型参数,估算得到的植被覆盖度与实测植被覆盖度之间均存在较好的线性关系,但实测法估算精度优于置信度法;2)研究区植被覆盖度从西北到东南逐渐增大,平均盖度为55.40%,植被覆盖度大于45%的面积比例在60%以上,植被覆盖整体较好。研究结果可为区域植被覆盖度遥感估算提供参考。

机载PMS粒子测量系统实时处理显示技术系统的研制

机载粒子测量系统 (PMS)的云降水观测数据只能实时监视并存入磁带 ,不能在飞机上实时处理显示 ,用于指挥人工增雨作业。该文介绍了将原有的数据磁带记录改为由机载微机记录并实时处理显示的硬件结构及其工作原理 。

机载PMS系统技术原理剖析

机载PMS粒子测量系统具有自动化程度高、实时性和适用性强、运行稳定的特点,能实时探测、记录、处理并显示云滴、降水粒子数据。简要介绍了该系统的组成及其工作原理,详细介绍了PMS系统中云滴和降水粒子的探测原理,分析其结构及技术特点,探讨其在实际应用中可能带来的误差,最后就PMS系统实际应用及研发提出了一些建议。

PMS系统在煤焦化公司的应用

简要介绍了我单位应用的设备巡检管理PMS系统及其特点,和应用后产生的效果,阐明了根据企业实际,不断引入先进的管理方法和技术可有效地提高企业设备管理现代化水平。

Chemical composition and quantitative relationship between meteorological condition and fine particles in Beijing

The recent year's monitor results of Beijing indicated that the pollution level of fine particles PM 2.5 showed an increasing trend. To understand pollution characteristics of PM 2.5 and its relationship with the meteorological conditions in Beijing, a one-year monitoring of PM 2.5 mass concentration and correspondent meteorological parameters was performed in Beijing in 2001. The PM 2.5 levels in Beijing were very high, the annual average PM 2.5 concentration in 2001 was 7 times of the National Ambient Air Quality Standards proposed by US EPA. The major chemical compositions were organics, sulfate, crustals and nitrate. It was found that the mass concentrations of PM 2.5 were influenced by meteorological conditions. The correlation between the mass concentrations of PM 2.5 and the relative humidity was found. And the correlation became closer at higher relative humidity. And the mass concentrations of PM 2.5 were negtive-correlated to wind speeds, but the correlation between the mass concentration of PM 2.5 and wind speed was not good at stronger wind.