Effect of curing time on the mesoscopic parameters of cemented paste backfill simulated using the particle flow code technique

Several special mechanical properties,such as dilatancy and compressibility,of cemented paste backfill(CPB)are controlled by its internal microstructure and evolution.The mesoscopic structure changes of CPB during the development process were investigated.On the basis of the scanning electron microscopy(SEM)and mechanical test results of CPB,the particle size information of CPB was extracted,and a two-dimensional particle flow code(PFC)model of CPB was established to analyze the evolution rule of mesoscopic parameters during CPB development.The embedded FISH language in PFC was used to develop a program for establishing a PFC model on the basis of the SEM results.The mesoscopic parameters of CPB samples at different curing times,such as coordination number(C_(n)),contact force chain,and rose diagram,were obtained by recording and loading and used to analyze the intrinsic relationship between mesoscopic parameter variations and macroscopic mechanical response during CPB development.It is of considerable significance to establish the physical model of CPB using the PFC to reveal the mesoscopic structure of CPB.

DEM simulation of particle flow on a single deck banana screen

A mathematical study of particle flow on a banana screen deck using the discrete element method (DEM) was presented in this paper. The motion characteristics and penetrating mechanisms of particles on the screen deck were studied. Effects of geometric parameters of screen deck on banana screening process were also investigated. The results show that when the values of inclination of discharge and increment of screen deck inclination are 10° and 5° respectively, the banana screening process get a good screening performance in the simulation. The relationship between screen deck length and screening efficiency was further confirmed. The conclusion that the screening efficiency will not significantly increase when the deck length L≥430 mm (L/B ≥ 3.5) was obtained, which can provide theoretical basis for the optimization of banana screen.

Rock strength weakening subject to principal stress rotation:Experimental and numerical investigations

During the construction and operation of gas storage reservoirs,changes in the principal stress direction can induce fracture propagation under conditions of lower differential stress,potentially leading to failure in the surrounding rock.However,the weakening of strength due to pure stress rotation has not yet been investigated.Based on fracture mechanics,an enhanced Mohr-Coulomb strength criterion considering stress rotation is proposed and verified with experimental and numerical simulations.The micro-damage state and the evolution of the rock under the pure stress-rotation condition are analyzed.The findings indicate that differential stress exceeding the crack initiation stress is a prerequisite for stress rotation to promote the development of rock damage.As the differential stress increases,stress rotation is more likely to induce rock damage,leading to a transition from brittle to plastic failure,characterized by wider fractures and a more complex fracture network.Overall,a negative exponential relationship exists between the stress rotation angle required for rock failure and the differential stress.The feasibility of applying the enhanced criterion to practical engineering is discussed using monitoring data obtained from a mine-by tunnel.This study introduces new concepts for understanding the damage evolution of the surrounding rock under complex stress paths and offers a new theoretical basis for predicting the damage of gas storage reservoirs.

Numerical simulation of submarine landslide tsunamis using particle based methods

This paper presents the simulation of tsunamis due to rigid and deformable landslides with consideration of submerged conditions by using particle methods. The smoothed particle hydrodynamics（SPH）, as a particle based method, is for solving problems of fast moving boundaries in the field of continuum mechanics. Other particle based methods, like the discrete element method（DEM）, are suitable for modeling the displacement and the collision related to the rigid landslides. In the present work, we use the SPH and the DEM to simulate tsunamis generated by rigid and deformable landslides with consideration of submerged conditions. The viscous free-surface flows are solved by a weakly compressible SPH and the displacement and the rotation of the rigid body slides are calculated using a multi-sphere DEM allowing for modeling solids of arbitrarily complex shapes. The fluid-solid interactions are simulated by coupling the SPH and the DEM. A rheology model combining the Papanastasiou and the Herschel-Bulkley models is applied to represent the viscoplastic behavior of the non-Newtonian flow in the submarine deformable landslide cases. Submarine landslide tsunamis due to rigid and deformable landslides are both simulated as typical landslide cases in this investigation. Our simulated results and the previous experimental results in the literatures are in good agreement, which shows that the proposed particle based methods are capable of modeling the submarine landslide tsunamis.

Numerical simulation of tetrahedral particle mixing and motion in rotating drums

A regular tetrahedron is the simplest three-dimensional structure and has the largest non-sphericity. Mixing of tetrahedral particles in a thin drum mixer was studied by the soft-sphere-imbedded pseudo- hard particle model and compared with that of spherical particles. The two particle types were simulated with different rotation speeds and drum filling levels. The Lacey mixing index and Shannon information entropy were used to explore the effects of sphericity on the mixing and motion of particles. Moreover, the probability density functions and mean values and variances of motion velocities, including translational and rotational, were computed to quantify the differences between the motion features of tetrahedra and spheres. We found that the flow regime depended on the particle shape in addition to the rotation speed and filling level of the drum. The mixing of tetrahedral particles was better than that of spherical particles in the rolling and cascading regimes at a high filling level, whereas it may be poorer when the filling level was low. The Shannon information entropy is better than the Lacey mixing index to evaluate mixing because it can reflect the real change of flow regime from the cataracting to the centrifugal regime, whereas the mixing index cannot.

An ISPH model for flow-like landslides and interaction with structures

An incompressible smoothed particle hydrodynamics（ISPH） model has been developed to investigate the flow-like landslide phenomena The landslide mass is idealized as rigid and perfectly-plastic material with a constant density. Unlike the widely-used explicit smoothed particle hydrodynamics（SPH） models for landslides, the Chorin＇s projection method is used herein to implicitly solve the normal stress via a pressure Poisson equation, leading to a realistic distribution of instantaneous stress fields free of spurious fluctuations. The capability of the model is demonstrated through three case studies, including the idealized granular flow, landslide interaction with a rigid barrier, and a historical cut-slope landslide in Hong Kong.

Linking discrete particle simulation to continuum process modelling for granular matter: Theory and application

Two approaches are widely used to describe particle systems： the continuum approach at macroscopic scale and the discrete approach at particle scale. Each has its own advantages and disadvantages in the modelling of particle systems. It is of paramount significance to develop a theory to overcome the disadvantages of the two approaches. Averaging method to link the discrete to continuum approach is a potential technique to develop such a theory. This paper introduces an averaging method, including the theory and its application to the particle flow in a hopper and the particle-fluid flow in an ironmaking blast furnace.