Delay-dependent robust passivity control for uncertain time-delay systems

The robust passivity control problem is addressed for a class of uncertain delayed systems with timevarying delay. The parameter uncertainties are norm-bounded. First, the delay-dependent stability sufficient condition is obtained for the nominal system, and then, based-on the former, the delay-dependent robust passivity criteria is provided and the corresponding controller is designed in terms of linear matrix inequalities. Finally, a numerical example is given to demonstrate the validity of the proposed approach.

Base Pressure Control with Semi-Circular Ribs at Critical Mach Number

When better fuel-air mixing in the combustion chamber or a reduction in base drag are required in vehicles,rockets,and aeroplanes,the base pressure control is activated.Controlling the base pressure and drag is necessary in both scenarios.In this work,semi-circular ribs with varying diameters(2,4,and 6 mm)positioned at six distinct positions(0.5D,1D,1.5D,2D,3D,and 4D)inside a square duct with a side of 15 mm are proposed as an efficient way to apply the passive control technique.In-depth research is done on optimising rib size for various rib sites.According to this study,the base pressure rises as rib height increases.Furthermore,the optimal location for the semi-circular ribs with a diameter of 2 mm is at 0.5D.The 1D location appears to be optimal for the 4 mm size as well.For the 6 mm size,however,the 4D position fills this function.

Cavitation Passive Control on Immersed Bodies

This paper introduces a new idea of controlling cavitation around a hydrofoil through a passive cavitation controller called artificial cavitation bubble generator （ACG）. Cyclic processes, namely, growth and implosion of bubbles around an immersed body, are the main reasons for the destruction and erosion of the said body. This paper aims to create a condition in which the cavitation bubbles reach a steady-state situation and prevent the occurrence of the cyclic processes. For this purpose, the ACG is placed on the surface of an immersed body, in particular, the suction surface of a 2D hydrofoil. A simulation was performed with an implicit finite volume scheme based on a SIMPLE algorithm associated with the multiphase and cavitation model. The modified k-ε RNG turbulence model equipped with a modification of the turbulent viscosity was applied to overcome the turbulence closure problem. Numerical simulation of water flow over the hydrofoil equipped with the ACG shows that a low-pressure recirculation area is produced behind the ACG and artificially generates stationary cavitation bubbles. The location, shape, and size of this ACG are the crucial parameters in creating a proper control. Results show that the cavitation bubble is controlled well with a well-designed ACG.

A novel induction motor control scheme using IDA-PBC

A new control scheme for induction motors is proposed in the present paper, applying the interconnection and damping assignment-passivity based control （IDA-PBC） method. The scheme is based exclusively on passivity based control, without restricting the input frequency as it is done in field oriented control （FOC）. A port-controlled Hamiltonian （PCH） model of the induction motor is deduced to make the interconnection and damping of energy explicit on the scheme. The proposed controller is validated under computational simulations and experimental tests using an inverter prototype.

Passive adaptive control of chaos in synchronous reluctance motor

The performance of synchronous reluctance motor （SynRM） degrades due to chaos when its systemic parameters fall into a certain area. To control the undesirable chaos in SynRM, a passive control law is presented in this paper, which transforms the chaotic SynRM into an equivalent passive system. It is proved that the equivalent system can be asymptotically stabilized at the set equilibrium point, namely, chaos in SynRM can be controlled. Moreover, in order to eliminate the influence of undeterministic parameters, an adaptive law is introduced into the designed controller. Computer simulation results show that the proposed controller is very effective and robust against the uncertainties in systemic parameters. The present study may help to maintain the secure operation of industrial servo drive system.

Passive control of chaotic system with multiple strange attractors

In this paper we present a new simple controller for a chaotic system, that is, the Newton-Leipnik equation with two strange attractors： the upper attractor （UA） and the lower attractor （LA）. The controller design is based on the passive technique. The final structure of this controller for original stabilization has a simple nonlinear feedback form. Using a passive method, we prove the stability of a closed-loop system. Based on the controller derived from the passive principle, we investigate three different kinds of chaotic control of the system, separately： the original control forcing the chaotic motion to settle down to the origin from an arbitrary position of the phase space; the chaotic intra-attractor control for stabilizing the equilibrium points only belonging to the upper chaotic attractor or the lower chaotic one, and the inter-attractor control for compelling the chaotic oscillation from one basin to another one. Both theoretical analysis and simulation results verify the validity of the suggested method.

Vibration control of fluid-conveying pipes: a state-of-the-art review

Fluid-conveying pipes are widely used to transfer bulk fluids from one point to another in many engineering applications.They are subject to various excitations from the conveying fluids,the supporting structures,and the working environment,and thus are prone to vibrations such as flow-induced vibrations and acoustic-induced vibrations.Vibrations can generate variable dynamic stress and large deformation on fluid-conveying pipes,leading to vibration-induced fatigue and damage on the pipes,or even leading to failure of the entire piping system and catastrophic accidents.Therefore,the vibration control of fluid-conveying pipes is essential to ensure the integrity and safety of pipeline systems,and has attracted considerable attention from both researchers and engineers.The present paper aims to provide an extensive review of the state-of-the-art research on the vibration control of fluid-conveying pipes.The vibration analysis of fluid-conveying pipes is briefly discussed to show some key issues involved in the vibration analysis.Then,the research progress on the vibration control of fluid-conveying pipes is reviewed from four aspects in terms of passive control,active vibration control,semi-active vibration control,and structural optimization design for vibration reduction.Furthermore,the main results of existing research on the vibration control of fluid-conveying pipes are summarized,and future promising research directions are recommended to address the current research gaps.This paper contributes to the understanding of vibration control of fluid-conveying pipes,and will help the research work on the vibration control of fluidconveying pipes attract more attention.

Optimum geometry of tuned liquid column-gas damper for control of offshore jacket platform vibrations under seismic excitation

In this study, the effectiveness of a tuned liquid column-gas damper, TLCGD, on the.suppression of seismic-induced vibrations of steel jacket platforms is evaluated. TLCGD is an interesting choice in the case of jacket platforms because it is possible to use the structural elements as the horizontal column of the TLCGD. The objective here is to find the optimum geometric parameters, namely orientation and configuration of vertical columns, length ratio, and area ratio of the TLCGD, considering nonlinear damping of the TLCGD and water-structure interaction between the jacket platform and sea water. The effects of different characteristics of ground motion such as PGA and frequency content on the optimum geometry are also investigated and it is observed that these features have some influence on the optimum area ratio. Finally it is observed that pulse arrangement of ground acceleration is one of the most important parameters affecting the efficiency of a TLCGD. In other words, it is found that the TLCGD＇s capability to reduce the RMS responses depends only on the frequency content of the ground acceleration, but its capability to reduce the maximum responses depends on both the frequency content and the pulse arrangement of the ground acceleration.

The synchronization of a fractional order hyperchaotic system based on passive control

This paper investigates the synchronization of a fractional order hyperchaotic system using passive control. A passive controller is designed, based on the properties of a passive system. Then the synchronization between two fractional order hyperchaotic systems under different initial conditions is realized, on the basis of the stability theorem for fractional order systems. Numerical simulations and circuitry simulations are presented to verify the analytical results.

Performance-based passive control analysis of adjacent structures:Optimization of Maxwell dampers

The performance-based passive control analysis of the Maxwell dampers between one 10-story and one 6-story adjacent RC frames is conducted in this work.Not only the optimal parameters but also the optimal arrangements of the Maxwell dampers are proposed based on the optimal target of making the total exceeding probability of the adjacent structures to be minimal.The applicability of the analytical expressions of the Maxwell damper damping parameters under different seismic performance targets are firstly examined and then the preferable damping parameters of the Maxwell dampers are proposed through the extensive parametric studies.Furthermore,the optimal arranging positions and optimal arranging numbers of the Maxwell dampers between the adjacent buildings are derived based on a large number of seismic fragility analyses,as well.The general arranging laws of the Maxwell dampers between the adjacent buildings are generated based on the discussion of the theoretical method through the simplified plane model.The optimal parameters and optimal arrangement of the Maxwell dampers presented make both the adjacent structures have preferable controlled effects under each seismic performance target which can satisfy the requirements of multi-performance seismic resistance of the modern seismic codes.

Passive Control of Turbulent Jet Flow with Wedged Nozzle

Turbulent flow field of the free jet with circular nozzle and wedged nozzles is measured using hot wire anemometry with resolution higher than the smallest turbulence time scale. Wavelet analysis is employed to perform multi-scale decomposition of instantaneous turbulence fluctuating velocity signals, and the energy distribution of the turbulent multi-scale eddy structures over scales is studied using wavelet coefficients. Investigation of the multi-scale eddy structures of circular jet and various wedged jets reveals the transport of the energy of these wedged jets in the space from the axis to the side of the jet, as compared with the circular jet. Furthermore, not only the eddy structures at the wedge tines in the near field are crashed, but also the interactions such as eddy structure union and entrainment take place at different longitudinal and normal locations along with the development of the jets because of the existence of wedges.

Synchronization of hyperchaotic Lorenz system based on passive control

Synchronization of a hyperchaotic Lorenz system is discussed using passive control. Based on the properties of a passive system, a passive controller is designed and the synchronization between two hyperchaotic Lorenz systems under different initial conditions is realized. Simulation results show the proposed synchronization method to be effective.

Passive control and synchronization of hyperchaotic Chen system

This paper investigates the control and synchronization of hyperchaotic Chen system based on the passive theory. By using two outputs, novel passive controllers are respectively designed to realize the globally asymptotical stability of the hyperchaotic Chen system and the error dynamical system, which avoids mistakes in Ref.[11], where function W（z） cannot guarantee that fo（z） is globally asymptotically stable via only one output and W（z） is the Lyapunov function of f0（z）. Furthermore, numerical simulations are given to show the effectiveness of our method.

Recent progress and application on seismic isolation energy dissipation and control for structures in China

China is a country where 100% of the territory is located in a seismic zone. Most of the strong earthquakes are over prediction. Most fatalities are caused by structural collapse. Earthquakes not only cause severe damage to structures, but can also damage non-structural elements on and inside of facilities. This can halt city life, and disrupt hospitals, airports, bridges, power plants, and other infrastructure. Designers need to use new techniques to protect structures and facilities inside. Isolation, energy dissipation and, control systems are more and more widely used in recent years in China. Currently, there are nearly 6,500 structures with isolation and about 3,000 structures with passive energy dissipation or hybrid control in China. The mitigation techniques are applied to structures like residential buildings, large or complex structures, bridges, underwater tunnels, historical or cultural relic sites, and industrial facilities, and are used for retrofitting of existed structures. This paper introduces design rules and some new and innovative devices for seismic isolation, energy dissipation and hybrid control for civil and industrial structures. This paper also discusses the development trends for seismic resistance, seismic isolation, passive and active control techniques for the future in China and in the world.

Numerical evaluation of passive control of shock wave/boundary layer interaction on NACA0012 airfoil using jagged wall

Shock formation due to flow compressibility and its interaction with boundary layers has adverse effects on aerodynamic characteristics, such as drag increase and flow separation. The objective of this paper is to appraise the practicability of weakening shock waves and, hence, reducing the wave drag in transonic flight regime using a two-dimensional jagged wall and thereby to gain an appropriate jagged wall shape for future empirical study. Different shapes of the jagged wall, including rectangular, circular, and triangular shapes, were employed. The numerical method was validated by experimental and numerical studies involving transonic flow over the NACA0012 airfoil, and the results presented here closely match previous experimental and numerical results. The impact of parameters, including shape and the length-to-spacing ratio of a jagged wall, was studied on aerodynamic forces and flow field. The results revealed that applying a jagged wall method on the upper surface of an airfoil changes the shock structure significantly and disintegrates it, which in turn leads to a decrease in wave drag. It was also found that the maximum drag coefficient decrease of around 17 % occurs with a triangular shape, while the maximum increase in aerodynamic efficiency（lift-to-drag ratio）of around 10 % happens with a rectangular shape at an angle of attack of 2.26？.

Hybrid Passive/Active Vibration Control of a Loosely Connected Spacecraft System

In this paper,a hybrid passive/active vibration(HPAV)controller of a loosely connected spacecraft consisting of a servicing satellite,a target and an X-shape structure isolator is first proposed to suppress vibrations of the system when subjected to the impulsive external excitations during the on-orbit missions.The passive dynamic response of the combined system can be adjusted appropriately to achieve the desired vibration isolation performance by tuning the structural parameters of the bio-inspired X-shape structure.Moreover,the adaptive control design through dynamic scaling technique is selected as the active component to maintain high vibration isolation performance in the presence of parameter uncertainties such as mass of the satellite platform,the damping and rotation friction coefficients of the X-shape structure.Compared with the pure passive system and the traditional spring-mass-damper(SMD)isolator,the HPAV strategy witnesses lower transmissibility,smaller vibration amplitude and higher convergence rate when subjected to the post-capture impact.Numerical simulations demonstrate the feasibility and validity of the proposed hybrid control scheme in suppressing vibrations of the free-floating spacecraft.

Passive Control of Flow-Induced Vibration(FIV)by Helical Strakes for Two Staggered Flexible Cylinders

Helical strake is a widely-used device for passive flow-induced vibration(FIV)control of cylindrical structures.It is omnidirectional and can effectively reduce FIV response amplitude.Studies on the passive FIV control for cylindrical structures are mainly concerned with a single isolated cylinder,while the influence of wake interference between multiple cylinders on FIV suppression devices is less considered up to now.In engineering applications,multiple flexible cylinders with large aspect ratios can be subjected to complex flow forces,and the effects of wake interference are obvious.The FIV suppression effect of helical strake of a common configuration(17.5D pitch and 0.25D height,where D is the cylinder diameter)in two staggered cylinders system is still unknown.This paper systematically studied the FIV response of multiple cylinders system fitted with the helical strakes by model tests.The relative spatial position of the two cylinders is fixed at S=3.0D and T=8.0D,which ensures the cylindrical structures in the flow interference region.The experimental results show that the helical strakes effectively reduce the FIV response on staggered upstream cylinder,and the suppression efficiency is barely affected by the smooth or straked downstream cylinder.The corresponding FIV suppression efficiency on the downstream cylinder is remarkably reduced by the influence of the upstream wake flow.The wake-induced vibration(WIV)phenomenon is not observed on the staggered downstream cylinder,which normally occurs on the downstream straked cylinder in a tandem arrangement.

Delay-dependent passive control of linear systems with nonlinear perturbation

The problem of delay-dependent passive control of a class of linear systems with nonlinear perturbation and time-varying delay in states is studied. The main idea aims at designing a state-feedback controller such that for a time-varying delay in states, the linear system with nonlinear perturbation remains robustly stable and passive. In the system, the delay is time-varying. And the derivation of delay has the maximum and minimum value. The time-varying nonlinear perturbation is allowed to be norm-bounded. Using the effective linear matrix inequality methodology, the sufficient condition is primarily obtained for the system to have robust stability and passivity. Subsequently the existent condition of a state feedback controller is given, and the explicit expression of the controller is obtained by means of the solution of linear matrix inequalities （LMIs）. In the end, a numerical example is given to demonstrate the validity and applicability of the proposed approach.

Observer-based passive control for uncertain linear systems with delay in state and control input

This paper deals with the robust passivity synthesis problem for a class of uncertain linear systems with timevarying delay in state and control input. The parameter uncertainties are norm-bounded and allowed to appear in all matrices of the model. The problem aims at designing an observer-based dynamic output-feedback controller that robustly stabilizes the uncertain systems and achieves the strict passivity of closed-loop systems for all admissible uncertainties. By converting the problem at hand into a class of strictly passive control problem for a parameterized system, the explicit solution is established and expressed in terms of a linear matrix inequality. A numerical example is provided to demonstrate the validity of the proposed approach.

Passive control of cavitating flow around an axisymmetric projectile by using a trip bar

Quasi-periodical evolutions such as shedding and collapsing of unsteady cloud cavitating flow, induce strong pressure fluctuations, what may deteriorate maneuvering stability and corrode surfaces of underwater vehicles. This paper analyzed effects on cavitation stability of a trip bar arranged on high-speed underwater projectile. Small scale water tank experiment and large eddy simulation using the open source software Open FOAM were used, and the results agree well with each other. Results also indicate that trip bar can obstruct downstream re-entrant jet and pressure wave propagation caused by collapse, resulting in a relatively stable sheet cavity between trip bar and shoulder of projectiles.