基于Swartz and Shrout的二次合成法,采用改进的两步法,将部分原料预合成,一次烧结合成具有100%钙钛矿结构的75Pb(Zn_(1/3)Nb_(2/3))O_3-10PbTiO_3-15BaTiO_3固溶体陶瓷。首先一次性称量PbO,然后和ZnNb_2O_6混合,在660～800℃预合成,将...基于Swartz and Shrout的二次合成法,采用改进的两步法,将部分原料预合成,一次烧结合成具有100%钙钛矿结构的75Pb(Zn_(1/3)Nb_(2/3))O_3-10PbTiO_3-15BaTiO_3固溶体陶瓷。首先一次性称量PbO,然后和ZnNb_2O_6混合,在660～800℃预合成,将预合成产物粉碎后再与TiO_2和BaCO_3按化学计量称量,充分混合后,在1060～1140℃保温1～2h烧结成陶瓷试样。实验结果表明:改进的两步法工艺能够将预合成温度降为660℃,烧结温度能被拓宽到80℃获得100%钙钛矿结构的固溶体陶瓷。不同于传统的预合成和烧结,改进的两步法工艺简单、有效,在预合成阶段没有形成钙钛矿相,烧结阶段陶瓷的成瓷和致密化同时进行,完成了中间相向钙钛矿相的转变,获得了介电性能优良的陶瓷试样。展开更多
利用室温下弛豫铁电单晶0.93Pb(Zn1/3Nb2/3)O3-0.07PbTiO3的材料参数,计算了[001]c极化PZN-7%PT晶体中的声表面波传播特性。结果表明,[001]c极化0.93Pb(Zn1/3Nb2/3)O3-0.07Pb TiO3单晶具有明显优于传统压电材料的声表面波特性。0.93Pb(Z...利用室温下弛豫铁电单晶0.93Pb(Zn1/3Nb2/3)O3-0.07PbTiO3的材料参数,计算了[001]c极化PZN-7%PT晶体中的声表面波传播特性。结果表明,[001]c极化0.93Pb(Zn1/3Nb2/3)O3-0.07Pb TiO3单晶具有明显优于传统压电材料的声表面波特性。0.93Pb(Zn1/3Nb2/3)O3-0.07Pb Ti O3单晶的声表面波特性随着传播方向发生明显的变化。综合考虑晶体的三种声表面波特性,发现Y切型晶体的综合声表面波性能最好,声表面波机电耦合系数k2值较大,能流角和声表面波自由表面相速度值较小,有望应用于下一代低频声表面波设备中。展开更多
The structure and dielectric properties of （Pb,Sr）Nb2O6-NaNbO3-SiO2 glass-ceramics with different Pb and Sr contents were investigated. The XRD pattern of glass-ceramics without Sr substitution is different from tha...The structure and dielectric properties of （Pb,Sr）Nb2O6-NaNbO3-SiO2 glass-ceramics with different Pb and Sr contents were investigated. The XRD pattern of glass-ceramics without Sr substitution is different from that with Sr substitution, which indicates the existence of orthorhombic phase in the latter ones. TEM bright field observation shows nanosized microstructures, while for samples with Sr, typical eutectic microstrncture with separated crystallized bands is found in the glass matrix. Dielectric properties measurement of the samples indicates an obvious improvement of dielectric constant, dielectric loss, DC field and temperature dependence of dielectric constant when the molar ratio of Sr to Pb is 4：6.展开更多
Mesoporous Pb3Nb2O8 photocatalysts were synthesized by the evaporation‐induced self‐assembly (EISA) method. Ag was deposited on the surface of mesoporous Pb3Nb2O8 by a facile photoreduction process. The as‐prepared...Mesoporous Pb3Nb2O8 photocatalysts were synthesized by the evaporation‐induced self‐assembly (EISA) method. Ag was deposited on the surface of mesoporous Pb3Nb2O8 by a facile photoreduction process. The as‐prepared samples were characterized by TG‐DSC, XRD, N2 adsorption, HR‐TEM andUV‐Vis spectroscopy. The results revealed that mesoporous Pb3Nb2O8 has a large specific surfacearea and uniform pore size distribution both before and after Ag deposition. The photodegradationof 2‐propanol and acetaldehyde gas under visible‐light (λ > 420 nm) irradiation was employed toevaluate the photocatalytic activities of the samples. The results showed that the photocatalyticactivity of mesoporous Pb3Nb2O8 is greatly improved by the Ag co‐catalyst. These mesoporousPb3Nb2O8 exhibit photocatalytic activities as much as 41 times higher when compared with thePb3Nb2O8 prepared by the solid state reaction method. The content of loaded Ag ranged from 0.5%to 5% (Ag2SO4). The optimal loading was determined to be 1% corresponding the highest photocatalyti cactivity. These results clearly indicate that the activity of Pb3Nb2O8 can be improved to obtain an outstanding performance for the photodegradation of organic pollutants.展开更多
Besides the two phase transitions known in ferroelectromagnets, an additional transition was observed experimentally in Pb(Fe1/2Nb1/2)O3 and the possible mechanism was explored. The magnetic moment shows that anomalou...Besides the two phase transitions known in ferroelectromagnets, an additional transition was observed experimentally in Pb(Fe1/2Nb1/2)O3 and the possible mechanism was explored. The magnetic moment shows that anomalous increases when the temperature goes down away from the Néel temperature of 20-30 K. The existence of the hysteresis verifies the weak ferromagnetic property. This additional phase transition is considered to originate from the magnetoelectric coupling between the ferroelectric and antiferromagnetic orders in this compound. From the M?ssbauer parameter analysis, it is confirmed that the hybridization of the O 2p, Fe 3d and Nb 4d electron states makes the realization of magnetoelectric coupling possible.展开更多
The influences of the PbO-B2O3-CuV2O6 （PBC） additives on the microwave dielectric properties of （Pb0.5Ca0.5） （Fe0.5Nb0.5）O3 （PCFN） ceramics were investigated as a function of sintering temperature from 950 ℃ ...The influences of the PbO-B2O3-CuV2O6 （PBC） additives on the microwave dielectric properties of （Pb0.5Ca0.5） （Fe0.5Nb0.5）O3 （PCFN） ceramics were investigated as a function of sintering temperature from 950 ℃ to 1 100 ℃. The sintering temperature of the specimens with the glass could be lowered from 1125 ℃ to 1 025℃ without the degradation of microwave dielectric properties. The microwave results showed that the dielectric constant cr was not significantly different while Qf values decreased with the increase of CuV206 content of PBC glass. For the specimens doped with PB-CV0.1 glass （81% PbO-9% B203-10% CuV2O6） and sintered at 1 025 ℃ for 3 h, the microwave dielectric properties of Qf=4 823 GHz, Cr=107.1 with TCF=＋15.03 ×10^-6/℃ were obtained.展开更多
文摘基于Swartz and Shrout的二次合成法,采用改进的两步法,将部分原料预合成,一次烧结合成具有100%钙钛矿结构的75Pb(Zn_(1/3)Nb_(2/3))O_3-10PbTiO_3-15BaTiO_3固溶体陶瓷。首先一次性称量PbO,然后和ZnNb_2O_6混合,在660～800℃预合成,将预合成产物粉碎后再与TiO_2和BaCO_3按化学计量称量,充分混合后,在1060～1140℃保温1～2h烧结成陶瓷试样。实验结果表明:改进的两步法工艺能够将预合成温度降为660℃,烧结温度能被拓宽到80℃获得100%钙钛矿结构的固溶体陶瓷。不同于传统的预合成和烧结,改进的两步法工艺简单、有效,在预合成阶段没有形成钙钛矿相,烧结阶段陶瓷的成瓷和致密化同时进行,完成了中间相向钙钛矿相的转变,获得了介电性能优良的陶瓷试样。
文摘利用室温下弛豫铁电单晶0.93Pb(Zn1/3Nb2/3)O3-0.07PbTiO3的材料参数,计算了[001]c极化PZN-7%PT晶体中的声表面波传播特性。结果表明,[001]c极化0.93Pb(Zn1/3Nb2/3)O3-0.07Pb TiO3单晶具有明显优于传统压电材料的声表面波特性。0.93Pb(Zn1/3Nb2/3)O3-0.07Pb Ti O3单晶的声表面波特性随着传播方向发生明显的变化。综合考虑晶体的三种声表面波特性,发现Y切型晶体的综合声表面波性能最好,声表面波机电耦合系数k2值较大,能流角和声表面波自由表面相速度值较小,有望应用于下一代低频声表面波设备中。
文摘The structure and dielectric properties of （Pb,Sr）Nb2O6-NaNbO3-SiO2 glass-ceramics with different Pb and Sr contents were investigated. The XRD pattern of glass-ceramics without Sr substitution is different from that with Sr substitution, which indicates the existence of orthorhombic phase in the latter ones. TEM bright field observation shows nanosized microstructures, while for samples with Sr, typical eutectic microstrncture with separated crystallized bands is found in the glass matrix. Dielectric properties measurement of the samples indicates an obvious improvement of dielectric constant, dielectric loss, DC field and temperature dependence of dielectric constant when the molar ratio of Sr to Pb is 4：6.
基金supported by the National Natural Science Foundation of China (11274150, 11574124)the Education Minister of Liaoning Province (JG2016ZD0015)the Open Research Fund of Jiangsu Provincial Key Laboratory for Nanotechnology Nanjing University~~
文摘Mesoporous Pb3Nb2O8 photocatalysts were synthesized by the evaporation‐induced self‐assembly (EISA) method. Ag was deposited on the surface of mesoporous Pb3Nb2O8 by a facile photoreduction process. The as‐prepared samples were characterized by TG‐DSC, XRD, N2 adsorption, HR‐TEM andUV‐Vis spectroscopy. The results revealed that mesoporous Pb3Nb2O8 has a large specific surfacearea and uniform pore size distribution both before and after Ag deposition. The photodegradationof 2‐propanol and acetaldehyde gas under visible‐light (λ > 420 nm) irradiation was employed toevaluate the photocatalytic activities of the samples. The results showed that the photocatalyticactivity of mesoporous Pb3Nb2O8 is greatly improved by the Ag co‐catalyst. These mesoporousPb3Nb2O8 exhibit photocatalytic activities as much as 41 times higher when compared with thePb3Nb2O8 prepared by the solid state reaction method. The content of loaded Ag ranged from 0.5%to 5% (Ag2SO4). The optimal loading was determined to be 1% corresponding the highest photocatalyti cactivity. These results clearly indicate that the activity of Pb3Nb2O8 can be improved to obtain an outstanding performance for the photodegradation of organic pollutants.
基金Projects(50572038 10374048) supported by the National Natural Science Foundation of China
文摘Besides the two phase transitions known in ferroelectromagnets, an additional transition was observed experimentally in Pb(Fe1/2Nb1/2)O3 and the possible mechanism was explored. The magnetic moment shows that anomalous increases when the temperature goes down away from the Néel temperature of 20-30 K. The existence of the hysteresis verifies the weak ferromagnetic property. This additional phase transition is considered to originate from the magnetoelectric coupling between the ferroelectric and antiferromagnetic orders in this compound. From the M?ssbauer parameter analysis, it is confirmed that the hybridization of the O 2p, Fe 3d and Nb 4d electron states makes the realization of magnetoelectric coupling possible.
基金Project supported by the National Natural Science Foundation of China (Grant No.60578041)the National High Tech-nology Research and Development Program of China (Grant No.715-006-0060)
文摘The influences of the PbO-B2O3-CuV2O6 （PBC） additives on the microwave dielectric properties of （Pb0.5Ca0.5） （Fe0.5Nb0.5）O3 （PCFN） ceramics were investigated as a function of sintering temperature from 950 ℃ to 1 100 ℃. The sintering temperature of the specimens with the glass could be lowered from 1125 ℃ to 1 025℃ without the degradation of microwave dielectric properties. The microwave results showed that the dielectric constant cr was not significantly different while Qf values decreased with the increase of CuV206 content of PBC glass. For the specimens doped with PB-CV0.1 glass （81% PbO-9% B203-10% CuV2O6） and sintered at 1 025 ℃ for 3 h, the microwave dielectric properties of Qf=4 823 GHz, Cr=107.1 with TCF=＋15.03 ×10^-6/℃ were obtained.
