Study on Direct Reduction Characteristics of Iron Ore Coal Mixed Pellets

In order to get DRI iron ore coal mixed pellets are reduced isothermally. The mechanisms of reduction desulphurization, iron oxide reduction and the structure regenesis of the coal mixed pellets during reduction have been studied. The effect of various processing factors on the quality of DRI and economy technological indices including compression strength, desulphurization rate, recovery rate, reaction fraction, carbon content and metallization are also researched.

Origin of Ore-Forming Fluids of Mississippi Valley-Type (MVT) Pb-Zn Deposits in Kangdian Area, China

Analyses of fluid\|inclusion leachates from ore deposits show that Na/Br ratios are within the range of 75-358 and Cl/Br 67-394, respectively, and this variation trend coincides with the seawater evaporation trajectory on the basis of the Na/Br and Cl/Br ratios. The average Cl/Br and Na/Br ratios of mineralizing fluids are 185 and 173 respectively, which are very close to the ratios (120 and 233) of the residual evaporated seawater past the point of halite precipitation. It is suggested that the original mineralizing brine was derived from highly evaporated seawater with a high salinity. However, the inclusion fluids have absolute Na values of \{69.9\}-\{2606.2\} mmol kg\+\{-1\} and Cl values of \{106.7\}-\{1995.5\} mmol kg\+\{-1\}. Most of the values are much less than those of seawater: Na, 485 mmol kg\+\{-1\} and Cl, 566 mmol kg\+\{-1\}, respectively; the salinity measured from fluid inclusions of the deposits ranges from \{2.47 wt%\} to \{15.78 wt%\} NaCl equiv. The mineralizing brine has been diluted. The \{δ\{\}\+\{18\}O\} and δD values of ore\|forming fluids vary from \{-8.21‰\} to \{9.51‰\} and from \{-40.3‰\} to \{-94.3‰\}, respectively. The δD values of meteoric water in this region varied from \{-80‰\} to \{-100‰\} during the Jurassic. This evidenced that the ore\|forming fluids are the mixture of seawater and meteoric water. Highly evaporated seawater was responsible for leaching and extracting Pb, Zn and Fe, and mixed with and diluted by descending meteoric water, which resulted in the formation of ores.

An experimental study on metal precipitation driven by fluid mixing: implications for genesis of carbonate-hosted lead–zinc ore deposits

A type of carbonate-hosted lead–zinc(Pb–Zn)ore deposits, known as Mississippi Valley Type(MVT)deposits, constitutes an important category of lead–zinc ore deposits. Previous studies proposed a fluid-mixing model to account for metal precipitation mechanism of the MVT ore deposits, in which fluids with metal-chloride complexes happen to mix with fluids with reduced sulfur, producing metal sulfide deposition. In this hypothesis, however, the detailed chemical kinetic process of mixing reactions, and especially the controlling factors on the metal precipitation are not yet clearly stated. In this paper, a series of mixing experiments under ambient temperature and pressure conditions were conducted to simulate the fluid mixing process, by titrating the metal-chloride solutions, doping withor without dolomite, and using NaHS solution. Experimental results, combined with the thermodynamic calculations, suggest that H_2S, rather than HS^-or S^(2-),dominated the reactions of Pb and/or Zn precipitation during the fluid mixing process, in which metal precipitation was influenced by the stability of metal complexes and the pH. Given the constant concentrations of metal and total S in fluids, the pH was a primary factor controlling the Pb and/or Zn metal precipitation. This is because neutralizing or neutralized processes for the ore-forming fluids can cause instabilities of Pb and/or Zn chloride complexes and re-distribution of sulfur species, and thus can facilitate the hydrolysis of Pb and Zn ions and precipitation of sulfides. Therefore, a weakly acidic to neutral fluid environment is most favorable for the precipitation of Pb and Zn sulfides associated with the carbonate-hosted Pb–Zn deposits.

Timing of formation of the Hongdonggou Pb-Zn polymetallic ore deposit,Henan Province,China:Evidence from Rb-Sr isotopic dating of sphalerites

The Hongdonggou Pb-Zn polymetallic ore deposit, located in the southwestern part of the Luanchuan Mo-W-Pb-Zn-Ag polymetallic ore mineralization in Henan Province, China, is an important part of the East Qinling metallogenic belt. The orebodies in the deposit, which are vein, bedded and lenticular, are mainly hosted in the syenite porphyry, and formed within the carbonate and clastic rocks of the Yuku and Qiumugou formations partially. The genesis of the deposit has previously been argued to be of hydrothermal-vein type or of skarn-hydrothermal type. In this study, we report the results of Rb-Sr isotopic dating based on sphalerites from the main orebody of the Hongdonggou Pb-Zn polymetallic ore deposit, which yield an isochron age of 135.7 ± 3.2 Ma, constraining the timing of mineralization as early Cretaceous. The age is close to those reported for the Pb-Zn deposits in the Luanchuan ore belt. The （87Sr/86Sr）i values of the sphalerites （0.71127± 0.00010） are lower than that of terrigenous silicates （0.720） and higher than the mantle （0.707）, suggesting that the metallogenic components were mainly derived through crust-mantle mixing. Combining the results from this study with those from previous work, we propose that the Hongdonggou Pb-Zn polymetallic ore deposit is a hydrothermal-vein deposit associated with the early Cretaceous tectonothermal event, and the mineralization is controlled by NW- and near EW-trending faults in the Luanchuan Mo-W-Pb-Zn-Ag polymetallic ore concentration belt.

Stable Isotopes and Halogen Geochemistry of the Huayuan Carbonate-hosted Pb-Zn Ore District, South China: Implications for the Salt Source of Ore-forming Fluids

The Huayuan Pb-Zn ore district in China,located in western Hunan Province,is a giant carbonate-hosted Pb-Zn ore district.The source of ore-forming brines in this ore district remains poorly constrained.Whether the highly saline brines are derived from evaporated seawater or dissolved evaporates continues to be intensely debated.Carbonate minerals associated with Pb-Zn mineralization haveδ^(13)CV-PDB andδ^(18)OV-SMOW values ranging from−5.55‰to+1.35‰(mean value of−0.69‰;n=14)and+16.28‰to+25.05‰(mean value of+20.22‰;n=14),respectively.This indicates that carbonate minerals are dominantly formed from dissolved ore-hosted carbonate rocks.Theδ^(34)S values of sulfides range from+20.2‰to+36.8‰,with an average value of+30.0‰(n=27).These results suggest that sulfur is predominantly derived from the thermochemical sulfate reduction of marine sulfate.The crush-leach analyzed solute data of fluid inclusions in sphalerite show the ore-forming fluids have Cl/Br molar ratios range from 118 to 384,and Na/Br molar ratios from 39 to 160(n=8).These Cl/Br ratios of hydrothermal fluid are much lower than those of seawater(657 to 564),but are consistent with bittern brines through early halite precipitation.We propose that ore-forming fluids are mainly derived from evaporitic basin brines,which leached base metals from the basement and/or country rocks.The brine then migrated to the basin margins through clastic rocks of basement and then precipitated sulfides by thermochemical sulfate reduction.

Study on Separation of Pb and Zn from Mixed Rougher Concentrates

The compositions of Pb and Zn mixed rougher concentrates were studied. The process utilizes flotation and gravity flow sheet to separate Pb or Zn. Pb and Zn in the tailings were reclaimed by gravity more efficiently. This test used an ion-wave shaking table developed by Kunming University of Science and Technology. Based on the test results, the optimum test condition was chosen and testing of synthetic condition was performed. The results show that the process produces a final Zn concentrate with a 42.16% grade and 79.64% recovery and a final Pb concentrate with a 46.52% grade and 78.41% recovery.

Characteristics of the ore-forming fluid in the Huayuan Pb-Zn ore filed, Northwest of Hunan Province, China

1 Geological Setting The Huayuan Pb-Zn ore field in Xiangxi is located in the southeastern margin of the Yangtze block and the mid-segment of the West Hunan-West Hubei metallogenic belt.The exposed stratum are the lower

Genesis of the Changba–Lijiagou Giant Pb-Zn Deposit, West Qinling, Central China: Constraints from S-Pb-C-O isotopes

The extensive Changba-Lijiagou Pb-Zn deposit is located in the north of the Xihe–Chengxian ore cluster in West Qinling. The ore bodies are mainly hosted in the marble, dolomitic marble and biotite-calcite-quartz schist of the Middle Devonian Anjiacha Formation, and are structurally controlled by the fault and anticline. The ore-forming process can be divided into three main stages, based on field geological features and mineral assemblages. The mineral assemblages of hydrothermal stage I are pale-yellow coarse grain, low Fe sphalerite, pyrite with pits, barite and biotite. The mineral assemblages of hydrothermal stage II are black-brown cryptocrystalline, high Fe shalerite, pyrite without pits, marcasite or arsenopyrite replace the pyrite with pits, K-feldspar. The features of hydrothermal stage III are calcite-quartz-sulfide vein cutting the laminated, banded ore body. Forty-two sulfur isotope analyses, twenty-five lead isotope analyses and nineteen carbon and oxygen isotope analyses were determined on sphalerite, pyrite, galena and calcite. The δ34 S values of stage I(20.3 to 29.0‰) are consistent with the δ34 S of sulfate(barite) in the stratum. Combined with geological feature, inclusion characteristics and EPMA data, we propose that TSR has played a key role in the formation of the sulfides in stage I. The δ34 S values of stage II sphalerite and pyrite(15.1 to 23.0‰) are between sulfides in the host rock, magmatic sulfur and the sulfate(barite) in the stratum. This result suggests that multiple S reservoirs were the sources for S2-in stage II. The δ34 S values of stage III(13.1 to 22‰) combined with the structure of the geological and mineral features suggest a magmatic hydrothermal origin of the mineralization. The lead isotope compositions of the sulfides have 206 Pb/204 Pb ranging from 17.9480 to 17.9782, 207 Pb/204 Pb ranging from 15.611 to 15.622, and 208 Pb/204 Pb ranging from 38.1368 to 38.1691 in the three ore-forming stages. The narrow and symmetric distributions of the lead isotope values reflect homogenization of granite and mantle sources before the Pb-Zn mineralization. The δ13 CPDB and δ18 OSMOW values of stage I range from-0.1 to 2.4‰ and from 18.8 to 21.7‰. The values and inclusion data indicate that the source of fluids in stage I was the dissolution of marine carbonate. The δ13 CPDB and δ18 OSMOW values of stage II range from-4 to 1‰ and from 12.3 to 20.3‰, suggesting multiple C-O reservoirs in the Changba deposit and the addition of mantle-source fluid to the system. The values in stage III are-3.1‰ and 19.7‰, respectively. We infer that the process of mineralization involved evaporitic salt and sedimentary organic-bearing units interacting through thermochemical sulfate reduction through the isotopic, mineralogy and inclusion evidences. Subsequently, the geology feature, mineral assemblages, EPMA data and isotopic values support the conclusion that the ore-forming hydrothermal fluids were mixed with magmatic hydrothermal fluids and forming the massive dark sphalerite, then yielding the calcite-quartz-sulfide vein ore type at the last stage. The genesis of this ore deposit was epigenetic rather than the previously-proposed sedimentary-exhalative(SEDEX) type.

Dynamics of Ore-Forming Processesof the Stratabound Skarn Copper Depositsof Tongling, Anhui Province

The skarn and ore bodies of the stratabound skarn copper deposits of Tongling, Anhui Province, are both controlled by definite stratigraphic horizons, and they are concordant with the strata. They occur as layers and layer-like bodies in permeable carbonate rocks of the Middle-Upper Carboniferous Huanglong and Chuanshan Formations which are underlain by impermeable shale or siliceous rocks of the Upper Devonian Wutong Formation. The authors study the dynamics of ore-forming processes of the ore deposits with the dynamic model of coupled transport and reaction, and the following results are obtained: The salinity gradient and flow rate of the ore-forming fluids can both promote the mixing and reaction of juvenile water and formation water, and the permeable strata are favourable sites for the intense transport-reaction of mixing and the formation of deposits. (2) As isothermal transport-reaction took place along the bedding of strata, the moving transport-reaction front formed at the contact between the ore-forming fluids and the rocks advanced slowly along the permeable strata, and then stratiform skarn and ore bodies concordant with the strata were formed. (3) The gradient transport-reaction taking place across the isotherms in the cross-bedding direction caused the mineralogical composition to alter gradually from magnesian skarn to sulphide ore bodies.

Bacterial leaching of discarded copper ores from Yongping, China

The elementary and phase analysis of discarded copper ores from Yongping of China has been performed. The experi- ments of extracting copper from the discarded copper ores were done with the mixed bacteria obtained through a series of enrichment, separation, domestication and combination tests. The results show that in the process of bioleaching, the pH value rises at first and drops gradually. The Eh value keeps rising along with the time and the appropriate Eh value varying between 750 and 800 mV will benefit the bioleaching copper. The high concentration of ferric ions is detrimental to the bioleaching copper. The results of bioleaching copper are good. That is, the copper recovery is 31.8% after 27 days.

Development in selective flotation of galena from lead-zinc-iron sulfide ores in China

A new technique for the flotation separation of lead zinc iron sulfide ores has been developed and applied to several mills in China. It is characterized by the matching of relationships among pulp pH, pulp potential, flotation collector inside grinding mill. The flotation separation of galena and sphalerite has been accomplished without the addition of any conventional depressant of sphalerite such as zinc sulphate. Lime is used as a regulator and stabilizer of pulp pH and potential. Diethyldithiocarbamate (DDTC), not xanthate, is determined as a collector for the selective flotation of galena from the Pb Zn Fe sulfide ores. The laboratory scale tests, the plant scale tests and the plant operations have all shown that the best separation results can be achieved at pH of 12.4～12.6, the pulp potential of 160～180 mV. The operation practice in the four plants has confirmed that compared with conventional flotation flowsheet, our new technology can greatly improve the flotation results, reduce the flotation time and the number of flotation cell, and increase the stability of operation and the adaptability to changes in ore properties. All these advantages have made this four plants more profitable.

Ore-forming fluid characteristics and genesis of vein-type lead-zinc mineralization of Xiaohongshilazi deposit,Jilin Province, China

The Xiaohongshilazi mineral deposit in Jilin Province,China,is located in the accretion zone in the northern margin of the North China Block. The deposit contains two types of ore bodies: layered Pb-Zn ore bodies in volcanic rock and vein-hosted Pb-Zn ore bodies controlled by fractures. The vein Pb-Zn ore bodies are strictly controlled by tectonic fracture zones trending in S-N direction,which comprise sulfide veins or sulfidebearing quartz veins distributed along faults or structural fissures. The ores mainly appear mesh-vein and vein structures,and also show solid-solution separation and metasomatic textures. The metal minerals are mainly sphalerite,galena,and pyrite,etc. Wall-rock alteration includes mainly sericitization,chloritization,silicification and carbonatization,etc. Microscope observations and Raman spectroscopy analyses indicate that the oreforming fluid of the vein Pb-Zn ore bodies was mainly magmatic water with low temperature,low salinity,and a shallow depth of metallogenesis( ~ 1.5 km). Sulfur and lead isotope analyses indicate that the sulfide source is mainly formation sulfur or biogenic sulfur,which is similar to the sulfur source of hydrothermal deposit( negative( δ^(34) S values),while the main Pb source was the upper crust with some mantle input. This article argues that the vein Pb-Zn ore body of the Xiaohongshilazi deposit is a low-to medium-temperature hydrothermal vein type related to the formation of a shallow magma chamber.

Fluid mixing as the mechanism of formation of the Dajing Cu-Sn-Ag-Pb-Zn ore deposit,Inner Mongolia ——Fluid inclusion and stable isotope evidence

Dajing Cu-Sn-Ag-Pb-Zn ore deposit, in the Inner Mongolia Autonomous Region of China, is a fissure-filling hydrothermal ore deposit. The d D values of quartz-hosted inclusion water are centered at -100 — -130. The d 34S values of sulfide ore minerals and d 13C values of carbonate gangue minerals vary from 0.3 to 2.6 and from -2.9 to -7.0, respectively. Integrated isotopic data point to two major contributions to the mineralizing fluid that include a dominant meteoric-derived groundwater, and sulfur and carbon species from hypogene magma. Linear trends are exhibited on the gaseous H2O versus CO2 plot, and plots of CO, N2, CH4, and C2H6. It is shown by quantitative simulation that magma degassing cannot explain the linear trends. Hence, these linear trends are interpreted in terms of mixing of CO2-rich magmatic fluid with meteoric-derived groundwater. The groundwater circulated in Paleozoic sedimentary rocks and absorbed CO, N2, CH4, C2H6 and radiogenic Ar from organic matter. Cooling effects resulting from mixing have caused the precipitation of ore minerals.

Rules of Assimilation of Single Ore and Mixed Ores

Assimilation behaviors of 7 kinds of iron ores from Australia, Brazil, India, South Africa and China were evalua-ted and analyzed. On the basis of that, four ore blending principles were proposed, and seven groups of iron ore pow-der blending schemes were designed. The ores of different types or from different places are shown apparently differ-ent in assimilation. The assimilation of hematite in Australia, Brazil and India is relatively high, but the assimilation o{ magnetite in South Africa and China and specularite in China is relatively low. The assimilation of the ores has negative correlation with MgO content and binary basicity, while the assimilation of the ores has positive correlation with porosity, SiO2 and Al2O3 contents, and crystal water. The iron ores with smaller crystal size and microstruc- ture looseness have relatively higher assimilation. Assimilation of mixed ores has relationship of linear, arch and ＂S＂ types to the ratio of single iron ore powder. When the charge ratio of ore is less than 25%, it possesses additivity, providing theoretical basis for optimization of ore matching.

Mixed State and High Effective Utilization of Pilbara Blending Iron Ore Powder

Pilbara blending iron ore powder （PB powder） is blending ores with good and poor quality iron ores, so how to use PB power effectively is a problem. The self-characteristics of PB powder and its single-components were studied respectively such as the macroscopic properties, microscopic properties, and high-temperature properties the behavior and effect in the sintering were mastered. Then based on the new ore-proportioning idea of iron ores sintering characteristics complementary, the principles on the effective use of PB powder were discussed, and was fur ther validated through the sintering pot test and industrial production. The results show that PB powder is composed of three kinds of iron ore, and the sintering characteristics of different iron ores are obviously discrepant. With the ore-proportioning optimization based on the iron ores sintering characteristics complementary, the proportion of PB iron ore powder can be increased to more than 45 %.

Anatomy and genesis of the world’s largest carbonate-hosted Zn-Pb deposit:New insights from ore characteristics,Zn-Pb-C-O isotopes,and trace element constraints of the Huoshaoyun deposit,Karakorum Range,Xinjiang

The Huoshaoyun deposit in the Karakorum area of NW China is the world’s largest zinc-lead carbonate ore deposit.Here we investigate the genesis of the mineralization based on multiproxy investigations.The deposit contains zinc-lead carbonate and sulfide minerals,with smithsonite(Smt),cerussite(Cer),and sulfides accounting for 85%,10%,and 5%of the total lead and zinc resources,respectively.Three ore-forming stages,involving Smt,Cer,and sulfides ores were summarized.The Smt mineralization is characterized by veined,massive,and stratified Smt forming horizontal sedimentary layered ore and vertical feeder veins similar to the SEDEX-type deposits.The sulfide and Cer veins display typical hydrothermal characteristics and are superimposed on the massive Smt ores.The Smt ores show high Li,Be,Cr,Y,Ba,Nd,Yb,and Zr contents,whereas the Cer veins have extremely high Sr contents(up to 3814–9174 ppm)and low Zr contents(less than 0.01 ppm).Galena and sphalerite show higher Cd concentrations compared to Smt and Cer ores.The Smt ores differ with different spatial locations,with Smt ores formed at the vent haveδ^(66)Zn values of+0.15‰to+0.21‰,the massive Smt formed close to the vent show a value of+0.13‰,and those formed away from the vent show a value of 0.05‰,all values being close to 0.The sulfides haveδ^(66)Zn values of−0.09‰to+0.04‰.The C-O isotopes of Smt ores are similar to both altered and unaltered host limestone,suggesting that the limestone was a potential source for carbon and oxygen.Quartz with veined Smt shows magmatic signatures withδ^(18)OVSMOW of+1.14‰to+2.23‰,high Pb(115–401 ppm)and Zn concentrations(390–997 ppm),whereas quartz associated with sulfide has meteoric fluid signature with the lowestδ^(18)OVSMOW(−14‰to−10.7‰),low Pb(11.6–49.0 ppm)and Zn(18.1–72.8 ppm)concentrations.The temperature of equilibration computed based on oxygen isotope fractionation between Smt and coeval quartz indicate a dual source with that of quartz derived from an aqueous fluid,whereas the source for Smt might involve CO_(2)or HCO_(3)^(−).We trace multiple metallogenic stages for this deposit including exhalation,hydrothermal deposition,and fault-controlled sulfide vein formation.The largest orebody(III-1)preserves a 16 Mt reserve of Zn and was formed by crust-mantle interaction at ca.195 Ma in the early development of the Linjitang post-arc rift system.Fluid convection,zinc enrichment driven by granitic magma,volcanic activity,and karst alteration induced by acid rain in a lagoonal environment promoted ore enrichment.

Preparation of crystalline mixed rare earth carbonates by Mg(HCO3)2 precipitation method

In acid treatment technology of Baotou mixed rare earth ore,large quantities of ammonia-nitrogen wastewater are produced in the step of ammonium bicarbonate precipitation to transform rare earth sulfate.In this paper,we adopted a green precipitant magnesium bicarbonate(Mg(HCO3)2) to substitute ammonium bicarbonate to eliminate ammonia-nitrogen pollution.The effects of n(HCO3^-):n(RE^3+),aging temperature and aging time on the crystallization using Mg(HCO3)2 precipitation method were investigated.The results indicate that the rare earths could be completely recovered when n(HCO3^-):n(RE^3+) is higher than 3.15:1.The crystal water content of rare earth carbonates is affected by the aging temperature.The precipitate has a bad filterability when the aging temperature is over 40℃.This can be attributed to the less crystallized water molecules of the hydrated rare earth carbonate precipitation.The mixed rare earth carbonates are prone to be crystalline,and have a good filterability at aging temperatures below 40℃.Meanwhile,the evolution mechanism of crystalline mixed rare earth carbonates is reasonably deduced,the amorphous rare earth carbonates are first dissolute and then recrystallized.Under the optimized aging conditions,the purity of the crystalline precipitate meets the requirements of the fine product standard(GB/T 16479-2008).The filtrated could be used to produce Mg(HCO3)2,thus to realize the recycling of magnesium sulfate.

Geological Characteristics and Genesis of the Jiamoshan MVT Pb–Zn Deposit in the Sanjiang belt, Tibetan Plateau

The carbonate-hosted Pb–Zn deposits in the Sanjiang metallogenic belt on the Tibetan Plateau are typical of MVT Pb–Zn deposits that form in thrust-fold belts. The Jiamoshan Pb–Zn deposit is located in the Changdu area in the middle part of the Sanjiang belt, and it represents a new style of MVT deposit that was controlled by karst structures in a thrust–fold system. Such a karst-controlled MVT Pb–Zn deposit in thrust settings has not previously been described in detail, and we therefore mapped the geology of the deposit and undertook a detailed study of its genesis. The karst structures that host the Jiamoshan deposit were formed in Triassic limestones along secondary reverse faults, and the orebodies have irregular tubular shapes. The main sulfide minerals are galena, sphalerite, and pyrite that occur in massive and lamellar form. The ore-forming fluids belonged to a Mg2+–Na+–K+–SO2-4–Cl-–F-–NO-3–H2 O system at low temperatures(120–130°C) but with high salinities(19–22% NaCl eq.). We have recognized basinal brine as the source of the ore-forming fluids on the basis of their H–O isotopic compositions(-145‰ to-93‰ for δDV-SMOW and-2.22‰ to 13.00‰ for δ18 Ofluid), the ratios of Cl/Br(14–1196) and Na/Br(16–586) in the hydrothermal fluids, and the C–O isotopic compositions of calcite(-5.0‰ to 3.7‰ for δ13 CV-PDB and 15.1‰ to 22.3‰ for δ18 OV-SMOW). These fluids may have been derived from evaporated seawater trapped in marine strata at depth or from Paleogene–Neogene basins on the surface. The δ34 S values are low in the galena(-3.2‰ to 0.6‰) but high in the barite(27.1‰), indicating that the reduced sulfur came from gypsum in the regional Cenozoic basins and from sulfates in trapped paleo-seawater by bacterial sulfate reduction. The Pb isotopic compositions of the galena samples(18.3270–18.3482 for 206 Pb/204 Pb, 15.6345–15.6390 for 207 Pb/204 Pb, and 38.5503–38.5582 for 208 Pb/204 Pb) are similar to those of the regional Triassic volcanic-arc rocks that formed during the closure of the Paleo-Tethys, indicating these arc rocks were the source of the metals in the deposit. Taking into account our new observations and data, as well as regional Pb–Zn metallogenic processes, we present here a new model for MVT deposits controlled by karst structures in thrust–fold systems.

Mechanism of improved magnetizing roasting of siderite–hematite iron ore using a synergistic CO–H2 mixture

A fluidized-bed magnetizing roasting-magnetic separation process was selected to treat this type of material.Phase transformations and microstructural changes in the product resulting from magnetizing roasting under different reducing gases(CO,H2,CO+H2)were clarified by vibrating sample magnetometry,X-ray diffraction,scanning electron microscopy,and energy-dispersive X-ray spectroscopy.The results indicated that the conversion ratio and saturation magnetization of samples roasted in a mixed gas of CO and H2 were higher than those of samples produced under CO or H2 alone.This indicated that synergy of the combined CO and H2 gas had a positive effect on the fluidized-bed magnetizing roasting process.The mechanism and kinetics of the improved magnetizing roasting of a siderite-hematite iron ore mixture under this synergistic CO-H2 system were investigated under isothermal conditions.The results indicated that the apparent activation energies of the reactions of the iron oxides decreased from 37.7 and 17.9 to 15.9 kJ/moI when the roasting atmosphere was changed from pure H2 or CO to a gas mixture of CO and H2,respectively.The mixed CO-H2 gas promoted the conversion ratio of hematite and siderite to magnetite,thereby improving the conversion ratio in the fluidized-bed magnetizing roasting process.

Geology and mineralization of the Pulang supergiant porphyry copper deposit(5.11 Mt)in Shangri-la,Yunnan Province,China:A review

The porphyry copper belt in the Geza island arc in southwestern China is the only Indosinian porphyry copper metallogenic belt that has been discovered and evaluated so far.The Pulang porphyry copper deposit(also referred to as the Pulang deposit)in this area has proven copper reserves of 5.11×106 t.This deposit has been exploited on a large scale using advanced mining methods,exhibiting substantial economic benefit.Based on many research results of previous researchers and the authors’team,this study proposed the following key insights.(1)The Geza island arc was once regarded as an immature island arc with only andesites and quartz diorite porphyrites occurring.This understanding was overturned in this study.Acidic endmember components such as quartz monzonite porphyries and quartz monzonite porphyries have been identified in the Geza island arc,and the mineralization is mainly related to the magmatism of quartz monzonite porphyries.(2)Complete porphyry orebodies and large vein orebodies have developed in the Pulang deposit.Main orebody KT1 occurs in the transition area between the potassium silicate alteration zone of quartz monzonite porphyries and the sericite-quartz alteration zone.Most of them have developed in the potassium silicate alteration zone.The main orebody occurs as large lenses at the top of the hanging wall of rock bodies,with an engineering-controlled length of 1920 m and thickness of 32.5‒630.29 m(average:187.07 m).It has a copper grade of 0.21%-1.56%(average:0.42%)and proven copper resources of 5.11×10^(6) t,which are associated with 113 t of gold,1459 t of silver,and 170×10^(3) t of molybdenum.(3)Many studies on diagenetic and metallogenic chronology,isotopes,and fluid inclusions have been carried out for the Pulang deposit,including K-Ar/Ar-Ar dating of monominerals(e.g.,potassium feldspars,biotites,and amphiboles),zircon U-Pb dating,and molybdenite Re-Os dating.The results show that the porphyries in the Pulang deposit are composite plutons and can be classified into pre-mineralization quartz diorite porphyrites,quartz monzonite porphyries formed during the mineralization,and post-mineralization granite porphyries,which were formed at 223±3.7 Ma,218±4 Ma,and 207±3.9 Ma,respectively.The metallogenic age of the Pulang deposit is 213‒216 Ma.(4)The petrogeochemical characteristics show that the Pulang deposit has the characteristics of volcanic arc granites.The calculation results of trace element contents in zircons show that quartz monzonite porphyries and granite porphyries have higher oxygen fugacity.The isotopic tracing results show that the diagenetic and metallogenic materials were derived from mixed crust-and mantle-derived magmas.