PbS nanoparticles coated with 2.6-O-dial1yl-β-CD were prepared successfully and characterized by transmission electron microscope (TEM), X-ray photoelectron spectrometer (XPS). The sample shows a very rapid induced a...PbS nanoparticles coated with 2.6-O-dial1yl-β-CD were prepared successfully and characterized by transmission electron microscope (TEM), X-ray photoelectron spectrometer (XPS). The sample shows a very rapid induced absorption展开更多
The aim of this work is to improve the photocatalytic and photoelectrochemical properties of TiO_(2) nanotubes(TiO_(2)-NTAs)by sensitizing them with PbS nanoparticles(NPs)prepared by the Successive Ionic Layer Adsorpt...The aim of this work is to improve the photocatalytic and photoelectrochemical properties of TiO_(2) nanotubes(TiO_(2)-NTAs)by sensitizing them with PbS nanoparticles(NPs)prepared by the Successive Ionic Layer Adsorption and Reaction method(SILAR).The Microstructure,surface morphology,phase composition and optical properties of the prepared structure were characterized using X-ray diffraction(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM and High-resolution mode HRTEM)and X-ray photoelectron spectroscopy(XPS).The TiO_(2) NTAs were loaded by PbS NPs,which contents increase by increasing the number of SILAR cycles.The PbS NPs,which have a size in the order of ~20 nm,were found to be uniformly distributed in the TiO_(2) NTAs without damaging the tubular ordered structure.The photocatalytic activity of the PbS/TiO_(2) NTAs system,toward Amido Black(AB),showed significant enhancement compared to the bare untreated TiO_(2) NTs.At 30 SILAR deposition cycles the PbS-NPs/TiO_(2) NTAs structure is able to remove 75% of BA under simulated solar light,considerably higher than the 40% removal obtained with unloaded TiO_(2) NTAs.A significant improvement of the Photoelectrochemical(PEC)efficiency has been also demonstrated for the PbS-NPs/TiO_(2) NTAs hybrid system.This improvement is mainly related to visible-light harvesting and reduced recombination of photo-generated electron-hole pairs due to the synergistic effect of the heterojunction and to the wellorganized morphology of the TiO_(2) NTAs.展开更多
The surface enhanced Raman scattering (SERS) technique has been developed greatly since its first discovery nearly twenty-nine years ago. It is a very attractive technique for the detection of various organic and in...The surface enhanced Raman scattering (SERS) technique has been developed greatly since its first discovery nearly twenty-nine years ago. It is a very attractive technique for the detection of various organic and inorganic molecules due to its sensitivity and selectivity. However, the most critical aspect for performing a SERS experiment is the choice and fabrication of the substrates. For many yeas, SERS has been still restricted primarily to the usage of detecting analytes adsorbed onto coinage(Au, Ag or Cu) or alkali( Li, Na or K) rough metallic surfaces. Recently, Quagliano reported SERS from molecules adsorbed on InAs/GaAs semiconductor quantum dots for the first time. Until now, few reports on semiconductor materials as the SERS substrates have been noted. Herein, we report our successful attempt to gain high signal-to-noise ratio (S/N) SERS spectra of 4-mercaptopyridine ( 4-Mpy ) adsorbed on Pb3O4 nanopaticles.展开更多
The self-assembly behavior of the amphiphilic block copolymer poly( methyl methacrylate) -block-poly( lead dimethacrylate) (PMMA-b-PLDMA) with cross-linked hydrophilic block(PLDMA) in ethanol was investigated....The self-assembly behavior of the amphiphilic block copolymer poly( methyl methacrylate) -block-poly( lead dimethacrylate) (PMMA-b-PLDMA) with cross-linked hydrophilic block(PLDMA) in ethanol was investigated. The results show that the size and morphology of the resulting micelle or micellar aggregates are ascribed to the content of ethanol and the nature of the solvent mixture. PbS nanoparticles were formed in the micelle by in situ reaction with H2S gas. The morphology and size of the self-assembly objects were investigated using scanning electron microscopy (SEM) and transmission electron microscopy(TEM).展开更多
Two-dimensional(2-D)layered metal-organic coordination(lead methacrylate(LDMA))networks have been prepared in aqueous solution under mild conditions and their structure determined by single crystal diffraction.As the ...Two-dimensional(2-D)layered metal-organic coordination(lead methacrylate(LDMA))networks have been prepared in aqueous solution under mild conditions and their structure determined by single crystal diffraction.As the ligand used in our experiments is easily polymerized,these metal-organic coordination layers are therefore employed as precursors to fabricate cross-linked polymer layered materials throughγ-irradiated polymerization.The stabilities of the samples are signifi cantly improved afterγ-irradiation.To our knowledge,this is the fi rst time that covalent bonded polymer layered structures have been fabricated without the assistance of added surfactant or template.Such layered polymer materials cannot only act as alternatives to layered inorganic materials in some caustic environments,but also allow the generation of PbS nanoparticles(NPs)without aggregation in the polymer matrix.By exposing the polymer layer to H2S gas at room temperature,uniform PbS nanoparticles with an average size of about 6 nm are generated in situ.In addition,the resulting PbS NPs exhibit near-infrared(NIR)luminescent properties,which suggests the composite materials may be useful as active optical elements at communication wavelengths from 1300 to 1550 nm.展开更多
文摘PbS nanoparticles coated with 2.6-O-dial1yl-β-CD were prepared successfully and characterized by transmission electron microscope (TEM), X-ray photoelectron spectrometer (XPS). The sample shows a very rapid induced absorption
基金the financial support of the Tunisian Ministry of higher education and scientific researchthe financial support of the University of Sharjah(grant No.1602143028-P).
文摘The aim of this work is to improve the photocatalytic and photoelectrochemical properties of TiO_(2) nanotubes(TiO_(2)-NTAs)by sensitizing them with PbS nanoparticles(NPs)prepared by the Successive Ionic Layer Adsorption and Reaction method(SILAR).The Microstructure,surface morphology,phase composition and optical properties of the prepared structure were characterized using X-ray diffraction(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM and High-resolution mode HRTEM)and X-ray photoelectron spectroscopy(XPS).The TiO_(2) NTAs were loaded by PbS NPs,which contents increase by increasing the number of SILAR cycles.The PbS NPs,which have a size in the order of ~20 nm,were found to be uniformly distributed in the TiO_(2) NTAs without damaging the tubular ordered structure.The photocatalytic activity of the PbS/TiO_(2) NTAs system,toward Amido Black(AB),showed significant enhancement compared to the bare untreated TiO_(2) NTs.At 30 SILAR deposition cycles the PbS-NPs/TiO_(2) NTAs structure is able to remove 75% of BA under simulated solar light,considerably higher than the 40% removal obtained with unloaded TiO_(2) NTAs.A significant improvement of the Photoelectrochemical(PEC)efficiency has been also demonstrated for the PbS-NPs/TiO_(2) NTAs hybrid system.This improvement is mainly related to visible-light harvesting and reduced recombination of photo-generated electron-hole pairs due to the synergistic effect of the heterojunction and to the wellorganized morphology of the TiO_(2) NTAs.
文摘The surface enhanced Raman scattering (SERS) technique has been developed greatly since its first discovery nearly twenty-nine years ago. It is a very attractive technique for the detection of various organic and inorganic molecules due to its sensitivity and selectivity. However, the most critical aspect for performing a SERS experiment is the choice and fabrication of the substrates. For many yeas, SERS has been still restricted primarily to the usage of detecting analytes adsorbed onto coinage(Au, Ag or Cu) or alkali( Li, Na or K) rough metallic surfaces. Recently, Quagliano reported SERS from molecules adsorbed on InAs/GaAs semiconductor quantum dots for the first time. Until now, few reports on semiconductor materials as the SERS substrates have been noted. Herein, we report our successful attempt to gain high signal-to-noise ratio (S/N) SERS spectra of 4-mercaptopyridine ( 4-Mpy ) adsorbed on Pb3O4 nanopaticles.
基金Suppored by the National Natural Science Foundation of China ( Nos 20374024 and 20534040) and the Program forChangjiang Scholars and Innovative Research Team in Universities(No IRT0422)
文摘The self-assembly behavior of the amphiphilic block copolymer poly( methyl methacrylate) -block-poly( lead dimethacrylate) (PMMA-b-PLDMA) with cross-linked hydrophilic block(PLDMA) in ethanol was investigated. The results show that the size and morphology of the resulting micelle or micellar aggregates are ascribed to the content of ethanol and the nature of the solvent mixture. PbS nanoparticles were formed in the micelle by in situ reaction with H2S gas. The morphology and size of the self-assembly objects were investigated using scanning electron microscopy (SEM) and transmission electron microscopy(TEM).
基金by the National Natural Science Foundation of China(Nos.20504011,20534040,50703046,and 20674026)the National Basic Research Program of China(2007CB936402).
文摘Two-dimensional(2-D)layered metal-organic coordination(lead methacrylate(LDMA))networks have been prepared in aqueous solution under mild conditions and their structure determined by single crystal diffraction.As the ligand used in our experiments is easily polymerized,these metal-organic coordination layers are therefore employed as precursors to fabricate cross-linked polymer layered materials throughγ-irradiated polymerization.The stabilities of the samples are signifi cantly improved afterγ-irradiation.To our knowledge,this is the fi rst time that covalent bonded polymer layered structures have been fabricated without the assistance of added surfactant or template.Such layered polymer materials cannot only act as alternatives to layered inorganic materials in some caustic environments,but also allow the generation of PbS nanoparticles(NPs)without aggregation in the polymer matrix.By exposing the polymer layer to H2S gas at room temperature,uniform PbS nanoparticles with an average size of about 6 nm are generated in situ.In addition,the resulting PbS NPs exhibit near-infrared(NIR)luminescent properties,which suggests the composite materials may be useful as active optical elements at communication wavelengths from 1300 to 1550 nm.