Direct production of hydrogen peroxide over bimetallic CoPd catalysts:Investigation of the effect of Co addition and calcination temperature

A series of CoPd/KIT-6 bimetallic catalysts with various Co:Pd molar ratios at different calcination temperatures were prepared and used for the direct synthesis of H_(2)O_(2) from H_(2) and O_(2).These catalysts were characterized by nitrogen adsorption-desorption,low and wide-angle X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),transmission electron microscopy(TEM),scanning electron microscopy(SEM),elemental mapping and energy-dispersive X-ray(EDX)methods.It was found that the particle size,electronic interactions,morphology,and textural properties of these catalysts as well as their catalytic activity in the reaction of H_(2) with O_(2) were affected by Co addition and different calcination temperatures.Also,the results showed that while the H_(2)O_(2) selectivity depends on Pd^(2+) species,the H_(2) conversion is related to Pd0 active sites.Among these catalysts,CoPd/KIT-6 calcined at 350℃(CoPd/KIT-350 catalyst)showed the best catalytic activity with 50%of H_(2)O_(2) selectivity and 51%conversion of H_(2).

Single-atom Pd catalysts as oxidase mimics with maximum atom utilization for colorimetric analysis

Pd-based nanomaterials have shown great promise as potential mimic enzymes,but conventional catalysts use only a small fraction of the Pd content that located on the catalyst's surface.Herein,we demonstrated that maximum atom utilization could be achieved by using single-atom Pd catalysts as oxidase mimic.The single-atom Pd nanozymes exhibit significantly enhanced catalytic efficiency,with a catalytic rate constant(Kcat)and the catalytic efficiency(Kcat/Km)values more than 625 and 4,837 times higher than those of horseradish peroxidase,respectively.A combined experimental and theoretical calculation reveals reactive oxygen species involved catalytic mechanism which endows single-atom Pd catalysts with excellent colorimetric analysis performance.Benefiting from the maximum atom utilization efficiency and well-defined structural features,the single-atom Pd nanozymes could be successfully applied for the total antioxidant capacity of fruit,determining the serum acid phosphatase activity as well as constructing NAND logic gate.This finding not only provides an effective strategy to maximize the noble-metal atom utilization efficiency as enzyme mimics,but also provides a new idea for extending their possible applications.

NITRIC OXIDE DECOMPOSITION ON ALKALI-PROMOTED Pd/AL_2o_3 CATALYSTS

Alkali-promoted Pd/Al2O3 catalysts exhibit much higher activities in NO decomposition than Pd/Al2O3. FTIR study shows that on the alkali promoted catalyst.nitric oxide exists on the surface mainly in negatively charged form(NO-)at high temperatures.which is consistent with the activity improvement.

Agglomerated Pd Catalysts and Their Applications in Hydrogen Production from Formic Acid Decomposition at Room Temperature

Agglomerated Pd catalysts with the nano-porous structure were simply prepared by one-step reduction reaction without using any stabilizer. The Pd catalysts show a high catalytic activity for the decomposition of formic acid at room temperature. Among all the Pd catalysts tested, the Pdug catalyst exhibits the highest catalytic activity. Moreover, the breakthrough of the advanced catalysts is that the above agglomerated Pd catalysts can be easily separated from the liquid system to control the catalytic reaction at any time, which may further promote the practical application of formic acid as a H2 storage material.

Effect of reduction method on the performance of Pd catalysts supported on activated carbon for the selective oxidation of glucose

The effect of the reduction method on the catalytic properties of palladium catalysts supported on activated carbon for the oxidation of D-glucose was examined.The reduction methods investigated include argon glow discharge plasma reduction at room temperature,reduction by flowing hydrogen at elevated temperature,and reduction by formaldehyde at room temperature.The plasma-reduced catalyst shows the smallest metal particles with a narrow size distribution that leads to a much higher activity.The catalyst characteristics show that the plasma reduction increases the amount of oxygen-containing functional groups,which significantly enhances the hydrophilic property of the activated carbon and improves the dispersion of the metal.

CO and C3Hs Total Oxidation over Pd Catalysts Supported on Commercial Ce-Zr Solid Solution： Effects of the Calcination Temperature and Hydrothermal Treatment

A series of Pd catalysts supported on commercial Ce-Zr solid solution（Pd/CZ） calcined at different tem- peratures（750, 900 and 1050 %℃） was prepared via an incipient wetness impregnation method. The activities of the fresh and hydrothermally aged PdTCZ catalysts were tested for total oxidation of CO and C3H8. For CO oxidation, the activity of either fresh or aged Pd/CZ catalysts decreased with the elevating of calcination temperature of CZ support, with a fresh catalyst calcined at 750 ℃ possessing the highest activity and hydrothermal stability. For C3H8 total oxidation, the activity of Pd/CZ catalysts could be improved by increasing the calcination temperature of support. However, the aged Pd/CZ catalysts showed higher activity than corresponding fresh Pd/CZ catalysts. The turnover frequency（TOF） over Pd/CZ catalyst for CO oxidation increased with increasing reduction ability of the catalysts, with a fresh catalyst calcined at 750 ℃ having the highest value（0.27 s^-1）. However, the TOF of Pd/CZ catalyst for C3Hs total oxidation was mainly affected by the size of Pd particles, and large Pd particles possessed a higher activity, with the highest TOF value（0.96s^-1） obtained over an aged catalyst calcined at 1050 ℃.

Effect of Alkali Carbonate/Bicarbonate on Citral Hydrogenation over Pd/Carbon Molecular Sieves Catalysts in Aqueous Media

The efficient citral hydrogenation was achieved in aqueous media using Pd/CMS and alkali additives like K2CO3. The alkali concentrations, reaction temperature and the Pd metal content were optimized to enhance the citral hydrogenation under aqueous media. In the absence of alkali, citral hydrogenation was low and addition of alkali promoted to ~92% hydrogenation without reduction in the selectivity to citronellal. The alkali addition appears to be altered the palladium sites. The pore size distribution reveals that the pore size of these catalysts is in the range of 0.96 to 0.7 nm. The palladium active sites are also quite uniform based on the TPR data. The catalytic parameters are correlated well with the activity data.

Methane Combustion and TPR/TPO Properties of Pd/Ce_xZr_ 1-xO_2/Al_2O_3 Catalysts

The effects of ceria and zirconium oxides additions to alumina-supported palladium catalysts on methane combustion behavior were investigated. The structure and TPR/TPO properties were studied by XRD, TPR, TPO techniques. The results show that the addition of Ce-Zr oxides improves the thermal stability of alumina and PdO. The Pd/Ce0.2Zr0.8/Al2O3 exhibits the highest activity and thermal stability for methane combustion.

Enhanced stability of nitrogen-doped carbon-supported palladium catalyst for oxidative carbonylation of phenol

Enhancing the stability of supported noble metal catalysts emerges is a major challenge in both science and industry.Herein,a heterogeneous Pd catalyst(Pd/NCF)was prepared by supporting Pd ultrafine metal nanoparticles(NPs)on nitrogen-doped carbon;synthesized by using F127 as a stabilizer,as well as chitosan as a carbon and nitrogen source.The Pd/NCF catalyst was efficient and recyclable for oxidative carbonylation of phenol to diphenyl carbonate,exhibiting higher stability than Pd/NC prepared without F127 addition.The hydrogen bond between chitosan(CTS)and F127 was enhanced by F127,which anchored the N in the free amino group,increasing the N content of the carbon material and ensuring that the support could provide sufficient N sites for the deposition of Pd NPs.This process helped to improve metal dispersion.The increased metal-support interaction,which limits the leaching and coarsening of Pd NPs,improves the stability of the Pd/NCF catalyst.Furthermore,density functional theory calculations indicated that pyridine N stabilized the Pd^(2+)species,significantly inhibiting the loss of Pd^(2+)in Pd/NCF during the reaction process.This work provides a promising avenue towards enhancing the stability of nitrogen-doped carbon-supported metal catalysts.

Reduction of nitrate from groundwater:powder catalysts and catalytic membrane

The reduction of nitrate contaminant in groundwater has gained renewed and intensive attention due to the environmental problems and health risks. Catalytic denetrification presents one of the most promising approaches for the removal of nitrate from water. Catalytic nitrate reduction from water by powder catalysts and catalytic membrane in a batch reactor was studied. And the effects of the initial concentration, the amounts of catalyst, and the flux H 2 on the nitrate reduction were also discussed. The results demonstrated that nitrate reduction activity and the selectivity to nitrogen gas were mainly controlled by diffusion limitations and the mass transfer of the reactants. The selectivity can improved while retaining a high catalytic activity under controlled diffusion condition or the intensification of the mass transfer, and a good reaction condition. The total nitrogen removal efficiency reached above 80%. Moreover, catalytic membrane can create a high effective gas/liquid/solid interface, and show a good selectivity to nitrogen in comparative with the powder catalyst, the selectivity to nitrogen was improved from 73 4% to 89 4%.

Preparation of Ultrafine and High Dispersion Pd/C Catalyst and Its Electrocatalytic Performance for Formic Acid Oxidation

A carbon supported Pd（Pd/C） catalyst used as the anodic catalyst in the direct formic acid fuel cells（DFAFC） was prepared via the improved complex reduction method with sodium ethylenediamine tetracetate（EDTA） as stabilizer and complexing agent. This method is very simple. The average size of the Pd particles in the Pd/C catalyst prepared with the improved complex reduction method is as small as about 2.1 nm and the Pd particles in the Pd/C catalyst possess an excellent uniformity. The Pd/C catalyst shows a high electrocatalytic activity and stability for the formic acid oxidation.

Surface interaction between Pd and nitrogen derived from hyperbranched polyamide towards highly effective formic acid dehydrogenation

Hydrogen production from formic acid decomposition(FAD)is a promising means of hydrogen energy storage and utilization in fuel cells.Development of efficient catalysts for dehydrogenation of formic acid is a challenging topic.The surface chemical and electronic structure of the active catalysis components is important in formic acid decomposition at room-temperature.Here,the pyrdinic-nitrogen doped catalysts from hyperbranched polyamide were prepared via in situ polymerization reaction process by using activated carbon as a support.Because of the introduction of the polymer,the particles of the catalysts were stabilized,and the average particle diameter was only 1.64 nm.Under mild conditions,the catalysts activities were evaluated for FAD.The optimized Pd-N30/C catalyst exhibited high performance achieving almost full conversion,with a turnover frequency of 3481 h^-1 at 30℃.

Influence of Al_2O_3/CeZrAl composition on the catalytic behavior of Pd/Rh catalyst

Al2O3 and Ce-Zr mixed oxides are important components of the automobile three-way catalyst.Various contents modifying A12O3(GAL) was physically introduced into Ce-Zr-Al mixed oxides(CZA) to form series of GAL/CZA composition.The Pd/Rh catalyst samples were prepared by different GAL/CZA support loading Pd/Rh,then aged at 950 oC for 6 h.The catalytic behavior of different Pd/Rh catalyst samples was studied.Surface area,oxygen storage capacity(OSC) and H2 adsorption capacity(TPR) of fresh and aged samples were...

EFFECT OF ELECTRON DONORS ON THE SELECTIVE HYDROGENATION OF DIENE TO MONOENE OVER HETEROGENIZED Pd CATALYST

In the selective hydrogenation of diene (or alkyne) using heterogenized homogeneous catalyst, the high selectivity of monoene formation only appears in a very short time interval. The addition of suitable electron donors can decrease or even cease the monoene hydrogenation and thereby keep the high monoene selectivity after reaching its maximum.

Pd-Catalyzed New Type of Cross-Coupling of RCOOH and Styryltrifluoroborates

The Palladium inserted hydridopalladium species represents as RCOOPdH. This work finds an interesting coupling of palladium inserted RCOOPdH species with potassium styryltrifluoroborates to synthesize new kinds of styryl ester compounds. Pd(OAc)2 was most effective catalyst for this new cross-coupling reaction under microwave irradiation and gave styryl esters in good to moderate yields.

Enhancing alkyne semi-hydrogenation through engineering metal-support interactions of Pd on oxides

Supported Pd catalysts show superior activities for olefin productions from alkynes through semi-hydrogenation reactions,but over-hydrogenation into alkanes highly decreases olefin selectivity.Using phenylacetylene semi-hydrogenation as a model reaction,here we explore the optimization approaches toward better Pd catalysts for alkyne semi-hydrogenation through investigating support effect and metal-support interactions.The results show that the states of Pd with supports can be tuned by varying oxide reducibility,loading ratios,and post-treatments.In our system,0.06 wt.%Pd on rutile-TiO_(2) nanorods shows the highest activity owing to the synergistic effects of single-atoms and clusters.Support reducibility can change the filling degrees of Pd 4d orbitals through varying interfacial bonding strengths,which further affect catalytic activity and selectivity.

CeO_2-ZrO_2-La_2O_3-Al_2O_3 composite oxide and its supported palladium catalyst for the treatment of exhaust of natural gas engined vehicles

Composite supports CeO2-ZrO2-Al2O3（CZA） and CeO2-ZrO2-Al2O3-La2O3（CZALa） were prepared by co-precipitation method. Palladium catalysts were prepared by impregnation and their purification ability for CH4, CO and NOx in the mixture gas simulated the exhaust from natural gas vehicles （NGVs） operated under stoichiometric condition was investigated. The effect of La2O3 on the physicochemical properties of supports and catalysts was characterized by various techniques. The characterizations with X-ray diffraction （XRD） and Raman spectroscopy revealed that the doping of La2O3 restrained effectively the sintering of crystallite particles, maintained the crystallite particles in nanoscale and stabilized the crystal phase after calcination at 1000 ℃. The results of N2-adsorption, H2-temperatnre-programmed reduction （H2-TPR） and oxygen storage capacity （OSC） measurements indicated that La2O3 improved the textural properties, reducibility and OSC of composite supports. Activity testing results showed that the catalysts exhibit excellent activities for the simultaneous removal of methane, CO and NOx in the simulated exhaust gas. The catalysts supported on CZALa showed remarkable thermal stability and catalytic activity for the three pollutants, especially for NOx. The prepared palladium catalysts have high ability to remove NOx, CH4 and CO, and they can be used as excellent catalysts for the purification of exhaust from NGVs operated under stoichiometric condition. The catalysts reported in this work also have significant potential in industrial application because of their high performance and low cost.

Active sites contribution from nanostructured interface of palladium and cerium oxide with enhanced catalytic performance for alcohols oxidation in alkaline solution

Nanostructured interface is significant for the electrocatalysis process. Here we comparatively studied the electrooxidation of alcohols catalyzed by nanostructured palladium or palladium-cerium oxide. Two kinds of active sites were observed in palladium-cerium oxide system, attributing to the co-action of Pd-cerium oxide interface and Pd sites alone, by CO stripping technique, a structure-sensitive process generally employed to probe the active sites. Active sites resulting from the nanostructured interfacial contact of Pd and cerium oxide were confirmed by high resolution transmission electron microscopy and electrochemical CO stripping approaches. Electrochemical measurements of cyclic voltammetry and chronometry results demonstrated that Pd-cerium oxide catalysts exhibited much higher catalytic performances for alcohols oxidation than Pd alone in terms of activity, stability and anti-poisoning ability.The improved performance was probably attributed to the nanostructured active interface in which the catalytic ability from each component can be maximized through the synergistic action of bi-functional mechanism and electronic effect. The calculated catalytic efficiency of such active sites was many times higher than that of the Pd active sites alone. The present work showed the significance of valid nanostructured interface design and fabrication in the advanced catalysis system.

Pd/AlF3 Catalysts for Catalytic Dehydrofluorination of 1,1,1,3,3-Pentafluoropropane

A series of Pd/AlF3 catalysts was prepared by an impregnation method and tested for vapor-phase dehy- drofluorination of 1,1,1,3,3-pentafluoropropane（HFC-245fa） to synthesize 1,3,3,3-tetrafluoropropene（HFO-1234ze）. The highest activity was obtained over Pd/AIF3 catalyst containing 1.0%（mass fraction） of Pd, with an HFC-245fa conversion of 79.5% and an HFO-1234ze selectivity of 99.4% after the reaction at 300 ℃ for 100 h. The reactivity was related to the surface acidity, as AlF3 provided active sites for the reaction. With the addition of Pd, the catalyst stability could be significantly improved. Raman spectroscopic and thermal-gravimetric analysis results reveal that there was less carbon deposit on spent Pd/AlF3 catalyst surface because Pd could effectively pyrolyse it. Thus, Pd/AlF3 catalysts were bi-functional for dehydrofluorination of HFC-245fa.

Layered Double Hydroxides Derived ZnO-Al2O3 Supported Pd-Ag Catalysts for Selective Hydrogenation of Acetylene

ZnO-Al2O3 derived from layered double hydroxides （ZnAl-LDH） was successfully applied for dispersion of Pd-Ag bimetallic catalysts for the selective hydrogenation of acetylene to ethylene and the Pd-Ag/ZnO-Al2O3 cata- lyst showed the best catalytic performance among the prepared samples. It was found that the catalyst carrier of ZnO-Al2O3 metal-oxides derived form ZnAl-LDH could significantly suppress the over-hydrogenation of acetylene to obtain the relatively higher selectivity of ethylene. The introduction of Ag restricted efficiently the formation of coke because of the oligomerization reaction, which was further evidenced by thermal gravimetric analysis. The se- lectivity towards ethylene was in the order of Pd-Ag/ZnO-Al2O3〉Pd/ZnO-Al2O3〉Pd-Ag/Al2O3〉Pd/Al2O3 at a high conversion level. As the thermal gravimetric and differential temperature analysis （TG-DTA） revealed, Pd-Ag intermetallic catalyst on the ZnO-Al2O3 support showed less coke formation.