Effect of two-step solid solution on microstructure andδphase precipitation of Inconel 718 alloy

Inconel 718 is the most popular nickel-based superalloy and is extensively used in aerospace,automotive,and energy indus-tries owing to its extraordinary thermomechanical properties.The effects of different two-step solid solution treatments on microstructure andδphase precipitation of Inconel 718 alloy were studied,and the transformation mechanism fromγ″metastable phase toδphase was clarified.The precipitates were statistically analyzed by X-ray diffractometry.The results show that theδphase content firstly increased,and then decreased with the temperature of the second-step solid solution.The changes in microstructure andδphase were studied by scanning electron microscopy and transmission electron microscopy.An intragranularδphase formed in Inconel 718 alloy at the second-[100]_(δ)[011]γ step solid solution temperature of 925℃,and its orientation relationship withγmatrix was determined as//and(010)_(δ)//(111)γ.Furthermore,the Vickers hardness of different heat treatment samples was measured,and the sample treated by second-step solid solution at 1010℃ reached the maximum hardness of HV 446.84.

The Real-Time,High Precision Phase Difference Measurement of Electron Density in HL-2A Tokamak

This paper introduces a real-time high precision measurement of phase difference based on Field Programmable Gate Array（FPGA） technology,which has been successfully applied to laser grating interference measurement and real-time feedback of plasma electron density in HL-2A tokamak.It can track the changes of electron density while setting the starting point of the density curve to zero.In a laboratory test,the measuring accuracy of phase difference is less than 0.1°,the time resolution is 80 ns,and the feedback delay is 180 μs.

MFPL:Multi-Frequency Phase Difference Combination Based Device-Free Localization

With the popularity of indoor wireless network,device-free indoor localization has attracted more and more attention.Unlike device-based localization where the target is required to carry an active transmitter,their frequent signal scanning consumes a large amount of energy,which is inconvenient for devices with limited energy.In this work,we propose the MFPL,device-free localization(DFL)system based on WiFi distance measurement.First,we combine multi-subcarrier characteristic of Channel State Information(CSI)with classical Fresnel reflection model to get the linear relationship between the change of the length of reflection path and the subcarrier phase difference.Then we calculate the Fresnel phase difference between subcarrier pairs with different spacing from CSI amplitude time series.Finally,we get the change of the length of the reflection path caused by target moving to achieve distance measurement and localization.Using a combination of subcarriers with different spacing to achieve distance measurement effectively broadens the maximum unambiguous distance of the system.To solve the complex non-linear problem of the intersection of two elliptic equations,we introduce Newton's method to transform the non-linear problem into a linear one.The effectiveness of our approach is verified using commodity WiFi infrastructures.The experimental results show our method achieves a median error of 0.87 m in actual indoor environment.

Optimization of the seismic processing phase-shift plus finite-difference migration operator based on a hybrid genetic and simulated annealing algorithm

Although the phase-shift seismic processing method has characteristics of high accuracy, good stability, high efficiency, and high-dip imaging, it is not able to adapt to strong lateral velocity variation. To overcome this defect, a finite-difference method in the frequency-space domain is introduced in the migration process, because it can adapt to strong lateral velocity variation and the coefficient is optimized by a hybrid genetic and simulated annealing algorithm. The two measures improve the precision of the approximation dispersion equation. Thus, the imaging effect is improved for areas of high-dip structure and strong lateral velocity variation. The migration imaging of a 2-D SEG/EAGE salt dome model proves that a better imaging effect in these areas is achieved by optimized phase-shift migration operator plus a finite-difference method based on a hybrid genetic and simulated annealing algorithm. The method proposed in this paper is better than conventional methods in imaging of areas of high-dip angle and strong lateral velocity variation.

Optical simulation of in-plane-switching blue phase liquid crystal display using the finite-difference time-domain method

The finite-difference time-domain method is used to simulate the optical characteristics of an in-plane switching blue phase liquid crystal display.Compared with the matrix optic methods and the refractive method,the finite-difference timedomain method,which is used to directly solve Maxwell＇s equations,can consider the lateral variation of the refractive index and obtain an accurate convergence effect.The simulation results show that e-rays and o-rays bend in different directions when the in-plane switching blue phase liquid crystal display is driven by the operating voltage.The finitedifference time-domain method should be used when the distribution of the liquid crystal in the liquid crystal display has a large lateral change.

Observability of Airborne Passive Location System with Phase Difference Measurements

With a pair of antennas spaced apart, an airborne passive location system measures phase differences of emitting signals. Regarded as cyclic ambiguities, the moduli of the measurements traditionally are resolved by adding more antenna elements. This paper models the cyclic ambiguity as a component of the system state, of which the observability is analyzed and compared to that of the bear- ings-only passive location system. It is shown that the necessary and sufficient observability condition for the bearings-only passive location system is only the necessary observability condition for the passive location system with phase difference measurements, and that when the system state is observable, the cyclic ambiguities can be estimated by accumulating the phase difference measurements, thereby making the observer able to locate the emitter with high-precision.

CHARACTERISTIC DIFFERENCE METHODS FOR TWO-PHASE DISPLACEMENT IN NATURALLY FRACTURED RESERVOIRS

In this paper we shall give the characteristic difference methods for two phase displace meat problem in naturally fractured reservoirs.We shall prove the existence,uniqueness of the ap proximate solution and a priori discrete L2-error estimates.

Non-contact Acoustic Contour Imaging Method Using Phase Difference in Extremely Shallow Underground

Buried object which exists at extremely shallow underground can be detected by using an acoustic vibration and a SLDV （scanning laser Doppler vibrometer）. Non-contact acoustic exploration can be realized by using air coupled sound. It was confirmed that discovery and the identification of a buried thing were possible using the OFR method （optimum frequency range method）. However, in this method, only the amplitude of the vibration speed spectrum is used and did not use the phase information. Therefore a new imaging method is proposed that used the phase information of the vibration speed spectrum. From the experimental results, the possibility of the outline extraction by using the phase difference between each scan point is confirmed. As a future task, the phase difference image will become clearer by changing the scan point density and long duration time of emitted wave.

THE UPWIND OPERATOR SPLITTING FINITE DIFFERENCE METHOD FOR COMPRESSIBLE TWO-PHASE DISPLACEMENT PROBLEM AND ANALYSIS

For compressible two-phase displacement problem, a kind of upwind operator splitting finite difference schemes is put forward and make use of operator splitting, of calculus of variations, multiplicative commutation rule of difference operators, decomposition of high order difference operators and prior estimates are adopted. Optimal order estimates in L 2 norm are derived to determine the error, in the approximate solution.

EPS混合土地基-沉箱抗震性能振动台模型试验

采用振动台试验研究了饱和砂土地基(CSS)和EPS混合土地基(CES)两种地基模型下沉箱结构的抗震性能。对比了两种不同地基模型下土体动力响应特征及沉箱结构动力稳定性,探讨了动力作用下沉箱的受力状态及失稳机制,分析了EPS混合土地基对上部沉箱结构地震稳定性的影响。试验结果表明:振动过程中CES工况的超孔压发展速率明显低于CSS,EPS混合土可显著提高模型抗液化性能。墙后填土作用于沉箱的动土压力沿深度方向呈三角形分布,沉箱中部位置动土压力最大。CES工况沉箱动力响应,包括加速度、位移及转动角等均小于CSS,表现出更好的抗震性能。CES沉箱所受动土推力与惯性力存在明显的相位差,有利于提高沉箱结构的稳定性。

VARIABLE GRID FINITE DIFFERENCE METHOD FOR TWO-DIMENSIONAL TWO-PHASEIMMISCIBLE FLOW

An explicit,time-dependent variable grid finite difference method is introduced and analyzed for approximating the solution of a scalar conservation law in two dimension. The scheme is stable,and the numerical solution is proved to converges to the relevant physical solution.

Single channel source separation of radar fuze mixed signal based on phase difference analysis

A new method based on phase difference analysis is proposed for the single-channel mixed signal separation of single-channel radar fuze.This method is used to estimate the mixing coefficients of de-noised signals through the cumulants of mixed signals,solve the candidate data set by the mixing coefficients and signal analytical form,and resolve the problem of vector ambiguity by analyzing the phase differences.The signal separation is realized by exchanging data of the solutions.The waveform similarity coefficients are calculated,and the time鈥攆requency distributions of separated signals are analyzed.The results show that the proposed method is effective.

ACCURACY ANALYSIS OF PASSIVE LOCATION SYSTEM WITH PHASE DIFFERENCE RATE MEASUREMENT

The conventional mono-station passive location techniques of direction finding are low in speed and accuracy, due to the little information available. In this paper, a novel measurement-rate (derivative) of phase difference from a two-element antenna array (interferometer) is introduced, accuracy of a passive location system with this measurement and directions of arrival (DOA) is analyzed, and the Cramer-Rao bound of location error of this system for 3D location is examined by simulations.

Phase Difference Method for DOA Estimation

The phase difference method (PDM) is presented for the direction of arrival (DOA) estimation of the narrowband source. It estimates the DOA by measuring the reciprocal of the phase range of the sensor output spectra at the interest frequency bin. The peak width and variance of the PDM are presented. The PDM can distinguish closely spaced sources with different and unknown center frequencies as long as they are separated with at least one frequency bin. The simulation results show that the PDM has a better resolution than that of the conventional beamforming.

Ni-Pt/MgAl_(2)O_(4)双金属催化剂构筑及其对不同构型烃类蒸汽重整制氢性能的影响

航空煤油成分复杂,由上百种不同构型的烃类组成,然而正构烷烃、异构烷烃、环烷烃和芳香烃这几类主要组分的构型和性质差异甚大,导致其蒸汽重整反应特性存在较大差异。本论文在前期研发Ni/MgAl_(2)O_(4)基础上,引入Pt构建Ni-Pt双金属催化剂,系统考察了该催化剂对不同构型组分重整反应性能的差异,并对不同构型组分在该催化剂上的重整反应路径进行了阐述。结果表明:液相还原法引人Pt能够使双金属催化剂具有合适的酸性和良好的金属Ni分散性,Ni-Pt两种金属协同效应,不仅能够提高单Ni催化剂活性,同时能够减少Ni烧结,优化催化剂稳定性;另外,不同构型组分在双金属催化剂上的重整性能具有显著差异,其中正癸烷重整的产气率以及H,选择性较为优异。不同构型烃类燃料的反应活性为:甲基环已烷>正癸烷>乙苯。由于甲基环已烷在反应过程中C-C键键能弱,易开环形成链状自由基与水发生重整反应,乙苯具有芳香烃结构且不易开环,重整反应所需能量较高。

PHASE SEPARATION OF RETINAL SCHIFF BASE IN TWO-COMPONENT LB FILM WITH DIFFERENT LIPIDS

Phase sepertion of 9-cis-retinal schiff base in two-component LB film with different lipids has been observed under Brewster Angle Microscope

多通道平行流扁管-紧凑式翅片相变蓄热器蓄/放热性能

工业余热浪费严重、利用率较低且实际应用过程中受到时间和空间的限制,需要高效蓄热技术和装置来解决此类问题。提出一种将多通道平行流扁管与紧凑式翅片相结合的新型相变蓄热器,以水为载热流体,月桂酸为相变材料。实验研究了载热流体注入方式、流量、入口温度对蓄热器蓄/放热性能的影响,并分析小温差下蓄热器的传热特性。结果显示,该蓄热器相变材料填充率为82.5%,紧凑式翅片的采用极大强化了相变材料侧换热过程,蓄/放热性能优良。当载热流体入口温度分别为45℃和41℃时,相变材料约在270 min和75 min完成相变,最小蓄/放热温差可达2℃,最小温差时的平均蓄热比功率为25.18 W/kg,平均取热比功率为20.23 W/kg。

BDS-3单频三种差分定位方法的性能初步评估

为进一步分析北斗三号全球卫星导航系统(BDS-3)B3I、B1C、B2a和B1I单频差分定位精度,利用全球14个MGEX测站构成基线长度在30km以下的7条基线2022-09-01到2022-09-30共30d观测数据,在评估可视卫星数和信噪比基础上,初步评估了BDS-3B3I、B1C、B2a和B1I单频伪距差分、载波平滑伪距差分和载波相位差分定位精度。结果表明:数据质量方面,BDS-3B3I、B1C、B2a和B1I可见卫星数和信噪比基本符合解算需求;差分性能方面,B1C和B2a相当,B3I和B1I略差;伪距差分E、N、U方向优于0.6m,点位精度优于0.8m,单频平滑效果B1C优于B3I、B1I和B2a,在E、N、U方向分别平均提升21.34%、22.2%和17.17%。设置平滑值和原始伪距阈值定位精度得到较好的提升;BDS-3载波相位差分B3I定位精度优于7 cm,B1C定位精度优于5 cm,B2a定位精度优于6 cm,B1I定位精度优于5cm。总体定位精度随着基线长度逐渐下降,单频伪距差分定位精度达到分米级,载波平滑伪距中短基线定位精度相较于伪距差分能够提升40%,长基线提升20%,载波相位差分为用户提供厘米级定位精度。

Effect of atomic initial phase difference on spontaneous emission of an atom embedded in photonic crystal

We investigate the effect of initial phase difference between the two excited states of a V-type three-level atom on its steady state behaviour of spontaneous emission. A modified density of modes is introduced to calculate the spontaneous emission spectra in photonic crystal. Spectra in free space are also shown to compare with that in photonic crystal with different relative positions of the excited levels from upper band-edge frequency. It is found that the initial phase difference plays an important role in the quantum interference property between the two decay channels. For a zero initial phase, destructive property is presented in the spectra. With the increase of initial phase difference, quantum interference between the two decay channels from upper levels to ground level turns to be constructive. Furthermore, we give an interpretation for the property of these spectra.

Mg-9Al-4Ca-2Cu合金的制备及其组织性能

制备一种合金用于减弱腐蚀给油气田带来的影响。利用等离子放电烧结炉(SPS),在Mg基础上添加Al、Ca、Cu元素制备成Mg-9Al-4Ca-2Cu合金,获得第二相Mg_(2)Ca和Mg_(2)Cu;利用现代分析技术进行观察和分析,利用N80钢对合金防腐性能进行表征。结果表明:经过合金处理后,N80钢自身耐蚀性变好,腐蚀电压由-0.672 V变为-0.452 V;腐蚀电流由1.572×10^(-5)A·cm^(-2)变为8.1×10^(-6)A·cm^(-2)。通过第一性原理计算基体相以及第二相的电子功函数获得第二相与基体相之间的电势差,结果显示:α-Mg与Mg_(2)Ca之间的电势差为-750~-460 mV、α-Mg与Mg_(2)Cu之间的电势差-392~106 mV,构成两对电偶腐蚀,可以向溶液中释放多余电子,从而抑制阳极金属溶解。