Effect of two-step solid solution on microstructure andδphase precipitation of Inconel 718 alloy

Inconel 718 is the most popular nickel-based superalloy and is extensively used in aerospace,automotive,and energy indus-tries owing to its extraordinary thermomechanical properties.The effects of different two-step solid solution treatments on microstructure andδphase precipitation of Inconel 718 alloy were studied,and the transformation mechanism fromγ″metastable phase toδphase was clarified.The precipitates were statistically analyzed by X-ray diffractometry.The results show that theδphase content firstly increased,and then decreased with the temperature of the second-step solid solution.The changes in microstructure andδphase were studied by scanning electron microscopy and transmission electron microscopy.An intragranularδphase formed in Inconel 718 alloy at the second-[100]_(δ)[011]γ step solid solution temperature of 925℃,and its orientation relationship withγmatrix was determined as//and(010)_(δ)//(111)γ.Furthermore,the Vickers hardness of different heat treatment samples was measured,and the sample treated by second-step solid solution at 1010℃ reached the maximum hardness of HV 446.84.

A phase inversion based sponge-like polysulfonamide/SiO_2 composite separator for high performance lithium-ion batteries

In this work,a sponge-like polysulfonamide(PSA)/SiO_2 composite membrane is unprecedentedly prepared by the phase inversion method,and successfully demonstrated as a novel separator of lithium-ion batteries(LIBs).Compared to the commercial polypropylene(PP) separator,the sponge-like PSA/SiO_2 composite possesses better physical and electrochemical properties,such as higher porosity,ionic conductivity,thermal stability and flame retarding ability.The LiCoO_2/Li half-cells using the sponge-like composite separator demonstrate superior rate capability and cyclability over those using the commercial PP separator.Moreover,the sponge-like composite separator can ensure the normal operation of LiCoO_2/Li half-cell at an extremely high temperature of 90 °C,while the commercial PP separator cannot.All these encouraging results suggest that this phase inversion based sponge-like PSA/SiO_2 composite separator is really a promising separator for high performance LIBs.

Contrast enhancement of medical ultrasound imaging with reversal phase-inversion pulse technology

A new ultrasound contrast imaging technique was proposed for eliminating the harmonic components from the emission signal transmitted by the broadband ultrasonic system.Reversal phase-inversion pulse was used for the first time to separate the contrast harmonics from the harmonics in the emission signal to improve the detection of contrast micro-bubbles.Based on the nonlinear acoustic theory of finite-amplitude effects and the associated distortion of the propagating wave,the Bessel-Fubini series model was applied to describe the nonlinear propagation effects of the reversal phase-inversion pulse,and the Church's equation for zero-thickness encapsulation model was used to produce the scattering-pulse of the bubble.For harmonic imaging,the experiment was performed using a 64-element linear array,which was simulated by Field II.The results show that the harmonic components from the emission signal can be completely cancelled,and the harmonics generated by the nonlinear propagation of the wave through the tissue,can be reduced by 15-30 dB.Compared with the short pulse,the reversal phase-inversion pulse can improve the contrast and definition of the harmonic image significantly.

Complex spherical-wave elastic inversion using amplitude and phase reflection information

Unlike the real-valued plane wave reflection coefficient(PRC)at the pre-critical incident angles,the frequency-and depth-dependent spherical-wave reflection coefficient(SRC)is more accurate and always a complex value,which contains more reflection amplitude and phase information.In near field,the imaginary part of complex SRC(phase)cannot be ignored,but it is rarely considered in seismic inversion.To promote the practical application of spherical-wave seismic inversion,a novel spherical-wave inversion strategy is implemented.The complex-valued spherical-wave synthetic seismograms can be obtained by using a simple harmonic superposition model.It is assumed that geophone can only record the real part of complex-valued seismogram.The imaginary part can be further obtained by the Hilbert transform operator.We also propose the concept of complex spherical-wave elastic impedance(EI)and the complex spherical-wave EI equation.Finally,a novel complex spherical-wave EI inversion approach is proposed,which can fully use the reflection information of amplitude,phase,and frequency.With the inverted complex spherical-wave EI,the velocities and density can be further extracted.Synthetic data and field data examples show that the elastic parameters can be reasonably estimated,which illustrate the potential of our spherical-wave inversion approach in practical applications.

Fabrication of multi-level 3-dimension microstructures by phase inversion process

One process based on phase inversion of fillers in microstructures for the fabrication of multi-level three-dimensional(3-D) microstructures is described using SU-8, a kind of epoxy photoresist, as the model constructing materials. This process is depicted by use of the routine photolithography technique to construct the top layer of 3-D microstructures on the bottom layer of 3-D microstructures layer by layer. This process makes it possible to fabricate multi-level 3-D microstructures with connectors at desired locations, and to seal long span microstructures(e.g. very shallow channels with depth less than 50 μm and width more than 300 μm) without blockage. In addition, this process can provide a sealing layer by the solidification of a liquid polymer layer, which can be as strong as the bulk constructing materials for microstructures due to a complete contact and cross-linking between the sealing layer and the patterned layers. The hydrodynamic testing indicates that this kind of sealing and interconnection can endure a static pressure of more than 10 MPa overnight and a hydrodynamic pressure drop of about 5.3 MPa for more than 8 hours by pumping the tetrahydrofuran solution through a 60 μm wide micro-channels.

Delay enhancement patterns in apical hypertrophic cardiomyopathy by phase-sensitive inversion recovery sequence

Objective:Late gadolinium enhancement(LGE) patterns of cardiovascular magnetic resonance (CMR) relying on PSIR(phase-sensitive inversion recovery sequence) techniques had been used to determine the characteristics of LGE in apical hypertrophic cardiomyopathy(ApHCM). Methods:Forty patients pure ApHCM[age,(60.2±10.4) years,31 men]were enrolled.LGE images were acquired using PSIR,and analyzed using a 17-segment model.Summing the LGE areas in all short axis slices yielded the total volume of late enhancement,which was subsequently presented as a proportion of total LV myocardium(%LGE).Results:Mean maximal apical wall thickness was(17.9±2.3) mm,and mean left ventricular(LV) ejection fraction was(67.7±8.0)%.LGE was detected in 130 segments of 30 patients(75.0%),occupying(4.9±5.5)% of LV myocardium.LGE was mainly detected at the junction between left and right ventricles in 12(30%) and at the apex in 28(70%),although LGE-positive areas were widely distributed,and not limited to the apex.Focal LGE at the non-hypertrophic LV segments was found in some ApHCM patients,even without LGE of hypertrophied apical segments.Conclusions:LGE was frequently observed not only in the thickened apex of the heart but also in other LV segments,irrespective of the presence or absence of hypertrophy.The simple presence of LGE on CMR was not representative of adverse prognosis in this population.

the phase-dependent gain without inversion in a Doppler broadened open four-level system

It is shown that in a Doppler broadened open N-type four-level atomic system with spontaneously generated coherence （SGC）, the gain without inversion （GWI） is very sensitive to the variation of the relative phase between the probe field and the driving field; the atomic exit rate （R0） and the ratio （S） of the atomic injection rates have a considerable modulation effect on the phase-dependent GWI. GWI first increases and then decreases with R0 increasing; in a certain value range of S, GWI increases monotonically with S increasing; by adjusting the values of R0 and S, in an open system a much larger GWI can be obtained than in the corresponding closed system [2011 Phys. Rev. A 83 043805]. The modulation effects of R0 and S on the phase-dependent GWI in the case with the counter-propagating probe and driving fields are stronger than those in the co-propagating case, GWI in the co-propagating case is much larger than that in the counter-propagating case.

Acoustic topological phase transition induced by band inversion of high-order compound modes and robust pseudospin-dependent transport

A simple two-dimensional phononic crystal hosting topologically protected edge states is proposed to emulate the quantum spin Hall effect in electronic systems, whose phononic topological phase can be reconfigured through the rotation of scatters. In particular, the band inversion occurs between two pairs of high-order compound states, resulting in topological phase transition from trivial to nontrivial over a relatively broad high-frequency range. This is further evidenced by an effective Hamiltonian derived by the k·p perturbation theory. The phononic topology is related to a pseudo-timereversal symmetry constructed by the point group symmetry of two doubly degenerate eigenstates. Numerical simulations unambiguously demonstrate robust helical edge states whose pseudospin indices are locked to the propagation direction along the interface between topologically trivial and nontrivial phononic crystals. Our designed phononic systems provide potential applications in robust acoustic signal transport along any desired path over a high-frequency range.

Surface Modification of PEEK-WC Membranes by Wet Phase Inversion for Ni(II) Adsorption

This work focuses on the preparation and characterization of flat sheet membrane based on modified polyether ether keetone (PEEK-WC). Additives, such as dibutyl phatalate (DBP) and diethyl hexyl phosphoric acid (DEHPA), were used to investigate their effect on membranes properties which are prepared by immersion precipitation. For that, several techniques were used to characterize membranes like thermal analyses, scanning electron microscopy and microanalyses. SEM pictures show versatile structures of the membranes from dense to porous membranes characterized by a sponge and finger like structure. Moreover, microanalyses of both surfaces, bottom and top surfaces show an aggregation of DEHPA at the top surface of the membrane. However, by adding dibutylphtalate, a well dispersion of the extractant was observed. Initially, micro-porous membranes were used in supported liquid membranes experiments for Ni(II) metal ions transports using diethyl hexyl phosphoric acid (DEHPA) as carrier. The extraction efficiency was very low about 28%, but enhanced by adding xylene to the organic phase. However, the modified membranes (with additives) by DBP and DEHPA were used on solid liquid extraction of Ni(II). The results show that by adding the plasticizer and the extractant, the efficiency of the system reached 63%.

Inversion of two-phase extensional basin systems during subduction of the Paleo-Pacific Plate in the SW Korean Peninsula:Implication for the Mesozoic “Laramide-style” orogeny along East Asian continental margin

During subduction, continental margins experience shortening along with inversion of extensional sedimentary basins. Here we explore a tectonic scenario for the inversion of two-phase extensional basin systems, where the Early-Middle Jurassic intra-arc volcano-sedimentary Oseosan Volcanic Complex was developed on top of the Late Triassic-Early Jurassic post-collisional sequences, namely the Chungnam Basin. The basin shortening was accommodated mostly by contractional faults and related folds. In the basement, regional high-angle reverse faults as well as low-angle thrusts accommodate the overall shortening, and are compatible with those preserved in the cover. This suggests that their spatial and temporal development is strongly dependent on the initial basin geometry and inherited structures.Changes in transport direction observed along the basement-sedimentary cover interface is a characteristic structural feature, reflecting sequential kinematic evolution during basin inversion. Propagation of basement faults also enhanced shortening of the overlying sedimentary cover sequences. We constrain timing of the Late Jurassic-Early Cretaceous(ca. 158-110 Ma) inversion from altered K-feldspar 40 Ar/39 Ar ages in stacked thrust sheets and K-Ar illite ages of fault gouges, along with previously reported geochronological data from the area. This "non-magmatic phase" of the Daebo Orogeny is contemporaneous with the timing of magmatic quiescence across the Korean Peninsula. We propose the role of flat/low-angle subduction of the Paleo-Pacific Plate for the development of the "Laramide-style" basement-involved orogenic event along East Asian continental margin.

Porosity of polystyrene membranes prepared by supercritical CO2-induced phase inversion

Microporous asymmetric polystyrene （PS） membranes were prepared by supercritical CO2-induced phase inversion. The effects of different process parameters, such as temperature, COe pressure and PS concentration in casting solution, on the membrane morphologies, pore size distribution and especially on the porosity of the membranes were experimentally investigated. The porosity showed a tendency of increasing to a maximum and then decreasing with an increase of temperature, CO2 pressure or PS concentration. The effects of process parameters on the membrane porosity were explained based on the properties of supercritical fluids.

Modulation of atomic exit and injection rates on the phase-dependent gain without inversion in a Doppler broadened open four-level system

It is shown that in a Doppler broadened open N-type four-level atomic system with spontaneously generated coherence (SGC), the gain without inversion (GWI) is very sensitive to the variation of the relative phase between the probe field and the driving field; the atomic exit rate (R0) and the ratio (S) of the atomic injection rates have a considerable modulation effect on the phase-dependent GWI. GWI first increases and then decreases with R0 increasing; in a certain value range of S, GWI increases monotonically with S increasing; by adjusting the values of R0 and S, in an open system a much larger GWI can be obtained than in the corresponding closed system [2011 Phys. Rev. A 83 043805]. The modulation effects of R0 and S on the phase-dependent GWI in the case with the counter-propagating probe and driving fields are stronger than those in the co-propagating case, GWI in the co-propagating case is much larger than that in the counter-propagating case.

Effect of inaccurate wavelet phase on prestack waveform inversion

Wavelets are critical to inversion methods. Incorrect phase estimation will affect the objective function and cause convergence to local minima, and thus produce biased or incorrect results. Based on two simple models and ignoring all other factors, we studied the variation of the wavelet phase as a function of frequency and its effect on the prestack waveform inversion. Numerical experiments show that an incorrect phase may result in large deviations from the real solution, even if there is a high similarity between the model and real wavelets. The precision of the inversion slightly improves by using the constant-phase rotation; however, the effect of phase inaccuracy is not eliminated, which limits the precision of prestack inversion.

Parameter identification for a damage phase field model using a physics-informed neural network

This work applies concepts of artificial neural networks to identify the parameters of a mathematical model based on phase fields for damage and fracture.Damage mechanics is the part of the continuum mechanics that models the effects of micro-defect formation using state variables at the macroscopic level.The equations that define the model are derived from fundamental laws of physics and provide important relationships among state variables.Simulations using the model considered in this work produce good qualitative and quantitative results,but many parameters must be adjusted to reproduce certain material behavior.The identification of model parameters is considered by solving an inverse problem that uses pseudo-experimental data to find the best values that fit the data.We apply physics informed neural network and combine some classical estimation methods to identify the material parameters that appear in the damage equation of the model.Our strategy consists of a neural network that acts as an approximating function of the damage evolution with output regularized using the residue of the differential equation.Three stages of optimization seek the best possible values for the neural network and the material parameters.The training alternates between the fitting of only the pseudo-experimental data or the total loss that includes the regularizing terms.We test the robustness of the method to noisy data and its generalization capabilities using a simple physical case for the damage model.This procedure deals better with noisy data in comparison with a more standard PDE-constrained optimization method,and it also provides good approximations of the material parameters and the evolution of damage.

PROGRESS IN PHASE INVERSION EMULSIFICATION FOR EPOXY RESIN WATERBORNE DISPERSIONS

In this review, our recent work in phase inversion emulsification （PIE） for polymer （especially epoxy resin） waterborne dispersions is summarized. Based on experimental results about PIE process, the physical model is proposed which can guide the synthesis of the waterborne dispersions such as polymer/nanoparticle composite dispersion. In the presence of a latent curing catalyst, PIE can give a crosslinkable epoxy resin waterborne dispersion. The dispersions can form cured transparent coatings with some unique properties such as UV shielding. They are promising in functional coatings, waterborne resin matrices for composites, and sizing for high performance fibers.

Influence of inaccurate wavelet phase estimation on seismic inversion

On the assumption that the seismic wavelet amplitude spectrum is estimated accurately, a group of wavelets with different phase spectra, regarded as estimated wavelets, are used to implement linear least-squares inversion. During inversion, except for the wavelet phase, all other factors affecting inversion results are not taken into account. The inversion results of a sparse reflectivity model （or blocky impedance model） show that： （1） although the synthetic data using inversion results matches well with the original seismic data, the inverted reflectivity and acoustic impedance are different from that of the real model. （2） the inversion result reliability is dependent on the estimated wavelet Z transform root distribution. When the estimated wavelet Z transform roots only differ from that of the real wavelet near the unit circle, the inverted reflectivity and impedance are usually consistent with the real model; （3） although the synthetic data matches well with the original data and the Cauchy norm （or modified Cauchy norm） with a constant damping parameter has been optimized, the inverted results are still greatly different from the real model. Finally, we suggest using the L1 norm, Kurtosis, variation, Cauchy norm with adaptive damping parameter or/and modified Cauchy norm with adaptive damping parameter as evaluation criteria to reduce the bad influence of inaccurate wavelet phase estimation and obtain good results in theory.

PREPARATION OF WATERBORNE ULTRAFINE PARTICLES OF EPOXY RESIN BY PHASE INVERSION TECHNIQUE

Waterborne ultrafine particles of epoxy resin were prepared by phase inversion technique. The results of SEM revealed that the particles diameter was in the range of 50 to 100 nm and the effects on amount of water required at phase inversion point were also discussed.

HYDRODYNAMIC AND THERMODYNAMIC EFFECTS IN PHASE INVERSION EMULSIFICATION PROCESS OF EPOXY RESIN IN WATER

The mechanism of phase inversion emulsification process （PIE） was studied for waterborne dispersion of highly viscous epoxy resin using non-ionic polymeric surfactants. Drop deformation and breakup, rheological properties, conductivity, and particle size measurements reveal the micro-structural transition amid emulsification. It is revealed that strong flow causes water drop to burst with the formation of droplets and huge interface. Phase inversion corresponds to an abrupt rheological transition from a type of viscous melt with weak elasticity to a highly elastic type of aqueous gel. This implies that the phase inversion equivalent to a curvature inversion. Based on this, a geometric model is postulated to correlate process variables to the particle size. The coverage and conformation of the surfactant plays key role for the particle size of the final emulsion. The interactions of thermodynamic and hydrodynamic effects are also discussed. It is concluded that the thermodynamics control the PIE while the hydrodynamics drives the creation of interface and involves every step of PIE.

PREPARATION OF BISPHENOL A EPOXY RESIN WATERBORNE DISPERSIONS BY THE PHASE INVERSION EMULSIFICATION TECHNIQUE

The phase inversion emulsification technique (PIET) is an effective physical method for preparing waterborne dispersions of polymer resins. Some results concerning the preparation of bisphenol A epoxy resin waterborne dispersions by PIET in our laboratory were summarized. Electrical properties, rheological behavior and morphological evolution during phase inversion progress were systematically characterized. The effects of the emulsifier concentration and emulsification temperature on phase inversion progress and the structural features of the waterborne particles were studied as well. The deformation and break up of water drops in a shear field were analyzed in terms of micro-theology, while the interaction and coalescence dynamics of water drops were discussed in terms of DLVO theory and Smoluchowski effective collision theory, respectively. Based on the experimental results and theoretical analysis, a physical model of phase inversion progress was suggested, by which the effects of the parameters on phase inversion progress and the structural features of the waterborne particles were interpreted and predicted.

Preparation of PVC/PVP composite polymer membranes via phase inversion process for water treatment purposes

In this work, new composite membranes were successfully prepared via phase inversion technique using polyvinyl chloride(PVC) and polyvinylpyrrolidone(PVP) as polymers and tetrahydrofuran(THF) and N-methyl-2-pyrrolidone(NMP) as solvents. The prepared membranes have been characterized by scanning electron microscope(SEM), and fourier transforms infrared spectroscopy(FTIR). The scanning electron microscope results prove that the prepared membranes are smooth and their pores are distributed throughout the whole surface and bulk body of the membrane without any visible cracks. The stress–strain mechanical test showed an excellent mechanical behavior enhanced by the presence of PVP in the prepared membranes. The membranes performance results showed that the salt rejection reached 98% with a high flux. This, in turn, makes the prepared membranes can be applied for sea and brackish water treatment through membrane distillation technology.