Phase measurement unit(PMU)is the key equipment for electric power system,which has been used to monitor and control power grid.But it is too expensive to deploy on each bus.So,we need to investigate how to deploy PMU...Phase measurement unit(PMU)is the key equipment for electric power system,which has been used to monitor and control power grid.But it is too expensive to deploy on each bus.So,we need to investigate how to deploy PMU to satisfy our observation requirements with minimum PMU numbers.This problem is called the optimal PMU placement(OPP).In this paper,we employ differential evolution(DE)algorithm to solve the OPP problem.Our optimization target is to make the power grid completely observable with maximum redundancy and minimum number of PMU.The proposed method is tested on IEEE 14-bus system,IEEE 30-bus system and IEEE 57-bus system respectively with considering the zero injection.展开更多
The single-line-to-ground faults with line breaks(SLGFs-LBs)occur more and more frequently in distribution networks and can cause major safety accidents.It is difficult to distinguish the single-line-to-ground faults(...The single-line-to-ground faults with line breaks(SLGFs-LBs)occur more and more frequently in distribution networks and can cause major safety accidents.It is difficult to distinguish the single-line-to-ground faults(SLGFs)in resonant grounding systems and ungrounding systems due to the same electrical characteristics on the source side and uncertain operation conditions of distribution networks.This paper proposes a method for distinguishing SLGFs-LBs and SLGFs.First,the source-side and load-side voltage characteristics of SLGFs and SLGFs-LBs are analyzed,and the phase difference between the voltages of the fault phase and non-fault phase on the load side is selected as the identification criterion.Phasor measurement units(PMUs)are selected as measuring devices.Then,the effects of operation conditions and external devices in distribution networks on the proposed method are discussed,and the phase errors caused by them are calculated to correct the identification method.Finally,the field testing and simulation experiments are conducted to verify the effectiveness and robustness of the proposed method.展开更多
Due to the high penetration of renewable distributed generation(RDG),many issues have become conspicuous during the intentional island operation such as the power mismatch of load shedding during the transition proces...Due to the high penetration of renewable distributed generation(RDG),many issues have become conspicuous during the intentional island operation such as the power mismatch of load shedding during the transition process and the power imbalance during the restoration process.In this paper,a phase measurement unit(PMU)based online load shedding strategy and a conservation voltage reduction(CVR)based multi-period restoration strategy are proposed for the intentional island with RDG.The proposed load shedding strategy,which is driven by the blackout event,consists of the load shedding optimization and correction table.Before the occurrence of the large-scale blackout,the load shedding optimization is solved periodically to obtain the optimal load shedding plan,which meets the dynamic and steady constraints.When the blackout occurs,the correction table updated in real time based on the PMU data is used to modify the load shedding plan to eliminate the power mismatch caused by the fluctuation of RDG.After the system transits to the intentional island seamlessly,multi-period restoration plans are generated to optimize the restoration performance while maintaining power balance until the main grid is repaired.Besides,CVR technology is implemented to restore more loads by regulating load demand.The proposed load shedding optimization and restoration optimization are linearized to mixed-integer quadratic constraint programming(MIQCP)models.The effectiveness of the proposed strategies is verified with the modified IEEE 33-node system on the real-time digital simulation(RTDS)platform.展开更多
基金This work was supported by National Natural Science Foundation of China under grant 71071116Key Project of Basic Research of Shanghai Committee of Science&Technology under grant 10JC1415300Program for New Century Excellent Talents in University of Ministry of Education of China under grant 306023.
文摘Phase measurement unit(PMU)is the key equipment for electric power system,which has been used to monitor and control power grid.But it is too expensive to deploy on each bus.So,we need to investigate how to deploy PMU to satisfy our observation requirements with minimum PMU numbers.This problem is called the optimal PMU placement(OPP).In this paper,we employ differential evolution(DE)algorithm to solve the OPP problem.Our optimization target is to make the power grid completely observable with maximum redundancy and minimum number of PMU.The proposed method is tested on IEEE 14-bus system,IEEE 30-bus system and IEEE 57-bus system respectively with considering the zero injection.
基金supported in part by National Science Foundation of China(No.51707117)。
文摘The single-line-to-ground faults with line breaks(SLGFs-LBs)occur more and more frequently in distribution networks and can cause major safety accidents.It is difficult to distinguish the single-line-to-ground faults(SLGFs)in resonant grounding systems and ungrounding systems due to the same electrical characteristics on the source side and uncertain operation conditions of distribution networks.This paper proposes a method for distinguishing SLGFs-LBs and SLGFs.First,the source-side and load-side voltage characteristics of SLGFs and SLGFs-LBs are analyzed,and the phase difference between the voltages of the fault phase and non-fault phase on the load side is selected as the identification criterion.Phasor measurement units(PMUs)are selected as measuring devices.Then,the effects of operation conditions and external devices in distribution networks on the proposed method are discussed,and the phase errors caused by them are calculated to correct the identification method.Finally,the field testing and simulation experiments are conducted to verify the effectiveness and robustness of the proposed method.
基金This work was supported in part by the National Key R&D Program of China(No.2017YFB0902900)the National Natural Science Foundation of China(No.51707136)the Natural Science Foundation of Hubei Province(No.2018CFA080).
文摘Due to the high penetration of renewable distributed generation(RDG),many issues have become conspicuous during the intentional island operation such as the power mismatch of load shedding during the transition process and the power imbalance during the restoration process.In this paper,a phase measurement unit(PMU)based online load shedding strategy and a conservation voltage reduction(CVR)based multi-period restoration strategy are proposed for the intentional island with RDG.The proposed load shedding strategy,which is driven by the blackout event,consists of the load shedding optimization and correction table.Before the occurrence of the large-scale blackout,the load shedding optimization is solved periodically to obtain the optimal load shedding plan,which meets the dynamic and steady constraints.When the blackout occurs,the correction table updated in real time based on the PMU data is used to modify the load shedding plan to eliminate the power mismatch caused by the fluctuation of RDG.After the system transits to the intentional island seamlessly,multi-period restoration plans are generated to optimize the restoration performance while maintaining power balance until the main grid is repaired.Besides,CVR technology is implemented to restore more loads by regulating load demand.The proposed load shedding optimization and restoration optimization are linearized to mixed-integer quadratic constraint programming(MIQCP)models.The effectiveness of the proposed strategies is verified with the modified IEEE 33-node system on the real-time digital simulation(RTDS)platform.