期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Three-Dimensional Simulations of RESET Operation in Phase-Change Random Access Memory with Blade-Type Like Phase Change Layer by Finite Element Modeling 被引量:2
1
作者 金秋雪 刘波 +8 位作者 刘燕 王维维 汪恒 许震 高丹 王青 夏洋洋 宋志棠 封松林 《Chinese Physics Letters》 SCIE CAS CSCD 2016年第9期128-131,共4页
An optimized device structure for reducing the RESET current of phase-change random access memory (PCRAM) with blade-type like (BTL) phase change layer is proposed. The electrical thermal analysis of the BTL cell ... An optimized device structure for reducing the RESET current of phase-change random access memory (PCRAM) with blade-type like (BTL) phase change layer is proposed. The electrical thermal analysis of the BTL cell and the blade heater contactor structure by three-dimensional finite element modeling are compared with each other during RESET operation. The simulation results show that the programming region of the phase change layer in the BTL cell is much smaller, and thermal electrical distributions of the BTL cell are more concentrated on the TiN/GST interface. The results indicate that the BTL cell has the superiorities of increasing the heating efficiency, decreasing the power consumption and reducing the RESET current from 0.67mA to 0.32mA. Therefore, the BTL cell will be appropriate for high performance PCRAM device with lower power consumption and lower RESET current. 展开更多
关键词 PCRAM cell RESET Three-Dimensional Simulations of RESET Operation in phase-change Random Access Memory with Blade-Type Like phase change Layer by Finite Element modeling of by in with
下载PDF
On the Liquid-Vapor Phase-Change Interface Conditions for Numerical Simulation of Violent Separated Flows 被引量:4
2
作者 Matthieu Ancellin Laurent Brosset Jean-Michel Ghidaglia 《Fluid Dynamics & Materials Processing》 EI 2020年第2期359-381,共23页
Numerous models have been proposed in the literature to include phase change into numerical simulations of two-phase flows.This review paper presents the modeling options that have been taken in order to obtain a mode... Numerous models have been proposed in the literature to include phase change into numerical simulations of two-phase flows.This review paper presents the modeling options that have been taken in order to obtain a model for violent separated flows with application to sloshing wave impacts.A relaxation model based on linear non-equilibrium thermodynamics has been chosen to compute the rate of phase change.The integration in the system of partial differential equations is done through a non-conservative advection term.For each of these modelling choices,some alternative models from the literature are presented and discussed.The theoretical framework for all phase change model(conservation equations and entropy growth)is also summarized. 展开更多
关键词 phase change modeling two-phase flow non-equilibrium thermodynamics compressible flow hyperbolic system of conservation laws
下载PDF
光滑粒子流体动力学框架下的EoSB空化模型及空化流动数值模拟研究 被引量:1
3
作者 吕鸿冠 孙鹏楠 +1 位作者 Andrea Colagrossi 张阿漫 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 2023年第2期97-113,共17页
过去十余年来,光滑粒子流体动力学(Smoothed Particle Hydrodynamics,SPH)研究领域一直在探索空化流动的数值模拟,但迄今为止依然没有精确且稳定的SPH空化模型.本文将阐述一种在SPH框架内实现空化流动模拟的数值方法.首先,为了捕捉空化... 过去十余年来,光滑粒子流体动力学(Smoothed Particle Hydrodynamics,SPH)研究领域一直在探索空化流动的数值模拟,但迄今为止依然没有精确且稳定的SPH空化模型.本文将阐述一种在SPH框架内实现空化流动模拟的数值方法.首先,为了捕捉空化初生及其发展,本文在SPH框架内提出一种基于状态方程的相变模型.特别地,本文还引入一种粒子体积自适应算法(Volume Adaptive Scheme,VAS),以保证空化区域流体剧烈膨胀时粒子体积分布的均一性.此外,本文还采用粒子位移修正技术(Particle Shifting Technique,PST)和张力不稳定性控制技术(Tensile Instability Control,TIC)以提高粒子分布质量和抑制数值空洞的产生.最后,本文还通过引入大涡模拟(Large Eddy Simulation,LES)模型以考虑湍流效应,提高本文提出的SPH空化模型对高雷诺数流动的适用性.研究结果表明,本文提出的基于SPH方法的新空化模型能实现空化区域和压力分布等问题的精确预报. 展开更多
关键词 Smoothed particle hydrodynamics Volume adaptive scheme Cavitating flows phase change model Equation of state
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部