Phase equilibrium in the ternary CuO-PbO-Ag system has been investigated using differential thermal analysis(DTA),thermogravimetry(TG),scanning electron microscopy(SEM) and X-ray diffraction(XRD) techniques.In the ter...Phase equilibrium in the ternary CuO-PbO-Ag system has been investigated using differential thermal analysis(DTA),thermogravimetry(TG),scanning electron microscopy(SEM) and X-ray diffraction(XRD) techniques.In the ternary CuO-PbO-Ag system,there is a eutectic reaction CuO+PbO+Ag=L at 750℃ and a composition of 12.04 mol.% Ag,16.35 mol.% CuO and 71.61 mol.% PbO.Two miscibility gaps near the two binary tie lines PbO-Ag and CuO-Ag were detected. No binary or ternary compound was detected in the ternary system.SEM and energy dispersive spectroscopy(EDS) confirm the presence of two liquid phases and the eutectic point.展开更多
Phase equilibria including γ,γ′,η,β and H in Ni Al Ti system were investigated by diffusion couple method and calculated with thermodynamic model.The experimental phase equilibria generally agree with ones ...Phase equilibria including γ,γ′,η,β and H in Ni Al Ti system were investigated by diffusion couple method and calculated with thermodynamic model.The experimental phase equilibria generally agree with ones reported till now.Regular solution and sublattice models were used in order to calculate these phase equilibria.The calculated results show agreement with experimental data.展开更多
Kiln phosphoric acid(KPA)technology could produce P2O5 with high purity and has been applied in thermal phosphoric acid industry;however the formation of fouling in the high-temperature rotary kiln restricts the stabl...Kiln phosphoric acid(KPA)technology could produce P2O5 with high purity and has been applied in thermal phosphoric acid industry;however the formation of fouling in the high-temperature rotary kiln restricts the stable and long-term operation.In this paper,the reaction of phosphate ores with gaseous P2O5 was investigated in a high-temperature reactor,and the Ca O-SiO2-P2O5 ternary phase diagram was analyzed to understand the fouling formation mechanism.The results showed that the low-melting-point products,such as Ca(PO3)2and Ca2P2O7,are responsible for the fouling in the KPA process.In addition,a small amount of impurities,e.g.,aluminum and iron,could facilitate the generation of the low-melting-point products and cause serious fouling.Based on the high-temperature SiO2-P2O5 and CaO-SiO2-P2O5 phase diagram analysis,the control of Si/Ca molar ratio(e.g.,Si/Ca=2.0)was found to avoid fouling formation in the kiln.These results could provide the operation parameters of reaction temperature and feeds composition to suppress the fouling in the kiln reactor for the phosphoric acid production in industry.展开更多
文摘Phase equilibrium in the ternary CuO-PbO-Ag system has been investigated using differential thermal analysis(DTA),thermogravimetry(TG),scanning electron microscopy(SEM) and X-ray diffraction(XRD) techniques.In the ternary CuO-PbO-Ag system,there is a eutectic reaction CuO+PbO+Ag=L at 750℃ and a composition of 12.04 mol.% Ag,16.35 mol.% CuO and 71.61 mol.% PbO.Two miscibility gaps near the two binary tie lines PbO-Ag and CuO-Ag were detected. No binary or ternary compound was detected in the ternary system.SEM and energy dispersive spectroscopy(EDS) confirm the presence of two liquid phases and the eutectic point.
文摘Phase equilibria including γ,γ′,η,β and H in Ni Al Ti system were investigated by diffusion couple method and calculated with thermodynamic model.The experimental phase equilibria generally agree with ones reported till now.Regular solution and sublattice models were used in order to calculate these phase equilibria.The calculated results show agreement with experimental data.
基金support from the National Key R&D Program of China(2018YFC1900201)the Provincial Key R&D Program of Shanxi(201603D31212003)。
文摘Kiln phosphoric acid(KPA)technology could produce P2O5 with high purity and has been applied in thermal phosphoric acid industry;however the formation of fouling in the high-temperature rotary kiln restricts the stable and long-term operation.In this paper,the reaction of phosphate ores with gaseous P2O5 was investigated in a high-temperature reactor,and the Ca O-SiO2-P2O5 ternary phase diagram was analyzed to understand the fouling formation mechanism.The results showed that the low-melting-point products,such as Ca(PO3)2and Ca2P2O7,are responsible for the fouling in the KPA process.In addition,a small amount of impurities,e.g.,aluminum and iron,could facilitate the generation of the low-melting-point products and cause serious fouling.Based on the high-temperature SiO2-P2O5 and CaO-SiO2-P2O5 phase diagram analysis,the control of Si/Ca molar ratio(e.g.,Si/Ca=2.0)was found to avoid fouling formation in the kiln.These results could provide the operation parameters of reaction temperature and feeds composition to suppress the fouling in the kiln reactor for the phosphoric acid production in industry.
