In this work, a series of hierarchical flower-like magnesium oxide(MgO) adsorbents were successfully fabricated in a cetyltrimethylammonium bromide(CTAB) assisted solvothermal route using hexamethylenetetramine(HMTA) ...In this work, a series of hierarchical flower-like magnesium oxide(MgO) adsorbents were successfully fabricated in a cetyltrimethylammonium bromide(CTAB) assisted solvothermal route using hexamethylenetetramine(HMTA) as a precipitating agent. Effects of CTAB feeding amount on the structure, morphology, pore structure, and corresponding adsorption behavior were investigated. The hierarchical gardenias flower-like MgO demonstrated a surface area of 336.54 m^(2)·g^(-1) at a minimum ratio of the CTAB/Mg^(2+)was 0.02 in the reaction system. The hierarchical MgO phosphate removal capacity was 348.32 mg·g^(-1), which followed the pseudo-second-order and Freundlich isotherm model obtained from the large surface area and appropriate pore size. The value of n also suggests the feasible nature of phosphate adsorption under the examined conditions. Indeed, this CTAB assisted solvothermal method can provide a new understanding to tune the desired properties of a material by merely adjusting the reaction parameters of MgO.展开更多
Phosphate removal is crucial for eutrophication control and water quality improvement.Electro-assisted adsorption,an eco-friendly elec-trosorption process,exhibited a promising potential for wastewater treatment.Howev...Phosphate removal is crucial for eutrophication control and water quality improvement.Electro-assisted adsorption,an eco-friendly elec-trosorption process,exhibited a promising potential for wastewater treatment.However,there are few works focused on phosphate electro-sorption,and reported electrodes cannot attach satisfactory removal capacities and rates.Herein,electro-assisted adsorption of phosphate via in-situ construction of La active centers on hierarchically porous carbon(LaPC)has been originally demonstrated.The resulted LaPC composite not only possessed a hierarchically porous structure with uniformly dispersed La active sites,but also provided good conductivity for interfacial electron transfer.The LaPC electrode achieved an ultrahigh phosphate electrosorption capability of 462.01 mg g^(-1) at 1 V,outperforming most existing electrodes.The superior phosphate removal performance originates from abundant active centers formed by the coupling of electricfield and capture sites.Besides,the stability and selectivity toward phosphate capture were maintained well even under comprehensive conditions.Moreover,a series of kinetics and isotherms models were employed to validate the electrosorption process.This work demonstrates a deep understanding and promotes a new level of phosphate electrosorption.展开更多
Red mud is the waste of alumina industry and has high TiO2 and Fe2O3 content which are active components for the adsorption of anion pollutants. In this study, the uptake of phosphate by red mud activated by heat trea...Red mud is the waste of alumina industry and has high TiO2 and Fe2O3 content which are active components for the adsorption of anion pollutants. In this study, the uptake of phosphate by red mud activated by heat treatment and acid-heat treatment was investigated. The factors influencing the adsorption were also investigated. The result showed that the red mud sample treated using acid-heat method at 80℃ with 0.25 mol/L HCl for 2 h achieved the highest phosphate removal. For the heat-activated red mud, the sample heated at 700℃ for 2 h preformed better than the other heat treatment. Phosphate removal by the activated red mud was significantly pH dependent, and pH 7 was the optimal pH for phosphate removal. The adsorption fits Langmuir isotherm model well and the maximum adsorption capacities of the acid-heat activated red mud and the heat activated samples were 202.9 mgP/g and 155.2 mgP/g, respectively.展开更多
For the removal of phosphate(PO43-) from water, an adsorbent was prepared via carbonization of sewage sludge from a wastewater treatment plant: carbonized sludge adsorbent(CSA). The mechanism of phosphate removal...For the removal of phosphate(PO43-) from water, an adsorbent was prepared via carbonization of sewage sludge from a wastewater treatment plant: carbonized sludge adsorbent(CSA). The mechanism of phosphate removal was determined after studying the structure and chemical properties of the CSA and its influence on phosphate removal. The results demonstrate that phosphate adsorption by the CSA can be fitted with the pseudo second-order kinetics and Langmuir isotherm models, indicating that the adsorption is single molecular layer adsorption dominated by chemical reaction. The active sites binding phosphate on the surface are composed of mineral particles containing Si/Ca/Al/Fe. The mineral containing Ca, calcite, is the main factor responsible for phosphate removal. The phosphate removal mechanism is a complex process including crystallization via the interaction between Ca2+ and PO43-; formation of precipitates of Ca2+, Al3+, and PO43-; and adsorption of PO43-on some recalcitrant oxides composed of Si/Al/Fe.展开更多
In this study,hierarchical Ag/La2 O2 CO3 micro/nanostructures(MNSs)were synthesized by in situ loading Ag nanoparticles(NPs)on the surface of the La2 O2 CO3 MNSs.The prepared La2 O2 CO3 MNSs present flower-like shape ...In this study,hierarchical Ag/La2 O2 CO3 micro/nanostructures(MNSs)were synthesized by in situ loading Ag nanoparticles(NPs)on the surface of the La2 O2 CO3 MNSs.The prepared La2 O2 CO3 MNSs present flower-like shape and can be tuned by the molar ratio of La(NO3)3 and CO(NH2)2.In the molar ratio of 1:2 to 1:55,the La2 O2 CO3 MNSs mainly consist of polyhedral rods,irregular rods and irregular spindles and their size is about 10,8 and 7μm,respectively.After loading Ag NPs,the spindle-like Ag/La2 O2 CO3 MNSs were used for phosphate removal and antibacterial activity.At the initial phosphate concentration of20 mg/L,the removal rate is 59.6%.The Ag/La2 O2 CO3 MNSs have significant antibacterial activity and their MIC values for S.aureus and E.coli are 31.3 and 15.6μg/mL,respectively.The results indicate that Ag/La2 O2 CO3 MNSs may have good application prospects in open water to inhibit bacterial growth.展开更多
This study focuses on identifying the factors under which mixed microbial seeds assist bio-chemical denitrification when Scrap Iron Filings(SIF)are used as electron donors and adsorbents in low C/N ratio waters.Batch ...This study focuses on identifying the factors under which mixed microbial seeds assist bio-chemical denitrification when Scrap Iron Filings(SIF)are used as electron donors and adsorbents in low C/N ratio waters.Batch studies were conducted in abiotic and biotic reactors containing fresh and aged SIF under different dissolved oxygen concentrations with NO_(3)^(-)−N and/or PO_(4)^(3−)influent(s)and their nitrate/phosphate removal and by-product formations were studied.Batch reactors were seeded with a homogenized mixed microbial inoculum procured from natural sludges which were enriched over 6 months under denitrifying conditions in the presence of SIF.Results indicated that when influent containing 40 mg/L of NO_(3)^(-)−N was treated with 5 g SIF,79.9%nitrate reduction was observed in 8 days abiotically and 100%removal was accomplished in 20 days when the reactor was seeded.Both abiotic and seeded reactors removed more than 92%PO_(4)^(3−)under high DO conditions in 12 days.Abiotic and biochemical removal of NO_(3)^(-)−N and abiotic removal of PO_(4)^(3−)were higher under independent NO_(3)^(-)−N/PO_(4)^(3−)loading,while 99%PO_(4)^(3−)was removed biochemically under combined NO_(3)^(-)−N and PO_(4)^(3−)loading.This study furthers the understandings of nitrate and phosphate removal in Zero Valent Iron(ZVI)assisted mixed microbial systems to encourage the application of SIF-supported bio-chemical processes in the simultaneous removals of these pollutants.展开更多
The oily wastewater generated from pretreatment unit of electrocoating industry contains oils, phosphate, organic solvents, and surfactants. In order to improve the removal efficiencies of phosphate and oils, to mitig...The oily wastewater generated from pretreatment unit of electrocoating industry contains oils, phosphate, organic solvents, and surfactants. In order to improve the removal efficiencies of phosphate and oils, to mitigate the membrane fouling, coagulation for ceramic membrane microfiltration of oily wastewater was performed. The results of filtration tests show that the membrane fouling decreased and the permeate flux and quality increased with coagulation as pretreatment. At the coagulant Ca (OH)2 dosage of 900 mg/L, the removal efficiency of phosphate was increased from 46.4% without coagulation to 99.6%; the removal of COD and oils were 97.0% and 99.8%, respectively. And the permeate flux was about 70% greater than that when Ca(OH)2 was not used. The permeate obtained from coagulation and microfiltration can be reused as make-up water, and the recommended operation conditions for pilot and industrial application are transmembrane pressure of 0.10 MPa and cross-flow velocity of 5 m/s. The comparison results show that 0.2 μm ZrO2 microfilter with coagulation could be used to perform the filtration rather than conventional ultrafilter, with very substantial gain in flux and removal efficiency of phosphate.展开更多
[ Objective] The study aimed at discussing the purification effect of constructed wetlands for treating river water flowing from phosphate mine areas into Fuxian Lake. [Method] The running parameters of the constructe...[ Objective] The study aimed at discussing the purification effect of constructed wetlands for treating river water flowing from phosphate mine areas into Fuxian Lake. [Method] The running parameters of the constructed wetlands were investigated for one year, and the purification effect of the constructed wetlands for treating the sewage from phosphate mine areas was analyzed. [Result] With the aid of the constructed wet- land, the average removal rates of total nitrogen (TN), total phosphorus (TP) and CODcr were 52%, 32% and 54%, and the removal effects were best when the designed hydraulic load was 0.67 m3/( m2 · d). Running stably for six years, the constructed wetlands had advantages of no power, low resistance and high removal rate. [ Conclusion] The constructed wetlands reduced the load of pollutants from phosphate mine areas into Fuxian Lake effectivelv, which Dlaved important roles in the Drotection of water aualitv of Fuxian Lake.展开更多
Alkaline residue (AR) was found to be an efficient adsorbent for phosphate removal from wastewater. The kinetic and equilibrium of phosphate removal were investigated to evaluate the performance of modified alkaline...Alkaline residue (AR) was found to be an efficient adsorbent for phosphate removal from wastewater. The kinetic and equilibrium of phosphate removal were investigated to evaluate the performance of modified alkaline residue. After treatment by NaOH (AR-NaOH), removal performance was significantly improved, while removal performance was almost completely lost after treatment by HCI (AR-HC1). The kinetics of the removal process by all adsorbents was well characterized by the pseudo second-order model. The Langmuir model exhibited the best correlation for AR-HC1, while AR was effectively described by Freundlich model. Both models were well fitted to AR-NaOH. The maximum adsorption capacities calculated from Langmuir equation were in following manner: AR-NaOH 〉 AR 〉 AR-HC1. Phosphate removal by alkaline residue was pH dependent process. Mechanisms for phosphate removal mainly involved adsorption and precipitation, varied with equilibrium pH of solution. For AR-HCI, the acid equilibrium pH (〈 6.0) was unfavorable for the formation of Ca-P precipitate, with adsorption as the key mechanism for phosphate removal. In contrast, for AR and AR- NaOH, precipitation was the dominant mechanism for phosphate removal, due to the incrase on pH (〉 8.0) after phosphate removal. The results of both XRD and SEM analysis confirmed CaHPOa.2H20 formation after phosphate removal by AR and AR-NaOH.展开更多
Fe_3O_4@SiO_2 magnetic nanoparticles functionalized with mesoporous cerium oxide(Fe_3O_4@SiO_2@mCeO_2) was fabricated as a novel adsorbent to remove phosphate from water. The prepared adsorbent was characterized by ...Fe_3O_4@SiO_2 magnetic nanoparticles functionalized with mesoporous cerium oxide(Fe_3O_4@SiO_2@mCeO_2) was fabricated as a novel adsorbent to remove phosphate from water. The prepared adsorbent was characterized by X-ray diffractometry(XRD), transmission electron microscopy(TEM), nitrogen adsorption-desorption and vibrating sample magnetometry(VSM), and its phosphate removal performance was investigated through the batch adsorption studies. Characterization results confirmed that mesoporous cerium oxide was successfully assembled on the surface of Fe_3O_4@SiO_2 nanoparticles, and the synthesized adsorbent possessed a typical core-shell structure with a BET surface area of 195 m^2/g, accessible mesopores of 2.6 nm, and the saturation magnetization of 21.11 emu/g. The newly developed adsorbent had an excellent performance in adsorbing phosphate, and its maximum adsorption capacity calculated from the Langmuir model was 64.07 mg/g. The adsorption was fast, and the kinetic data could be best fitted with the pseudo-second-order kinetic model. The phosphate removal decreased with the increase of solution pH(2 to 10), while the higher ionic strength slightly promoted the phosphate adsorption. The presence of Cl~– and SO^(2–)_4 could enhance the adsorption of phosphate whereas HCO~–_ 3 had interfering effect on the phosphate adsorption. The adsorption mechanism was studied by analyzing Zeta potential and FTIR spectroscopy, and the results indicated that the replacement of the surface hydroxyl groups by phosphate ions with the formation of inner-sphere complex played a key role in the phosphate adsorption. The spent adsorbent could be quickly separated from aqueous solution with the assistance of the external magnetic field, and the adsorbed phosphate could be effectively desorbed using a 1 mol/L NaOH solution.展开更多
The existence of many anions in wastewater reduces the removal efficiency of phosphate by adsorbents under realistic conditions.Facing this challenge,the study reports on an insistent and stable composite adsorbent of...The existence of many anions in wastewater reduces the removal efficiency of phosphate by adsorbents under realistic conditions.Facing this challenge,the study reports on an insistent and stable composite adsorbent of molybdate complexes Fe-(MoO_(x))embedded in a macroporous anion exchange resin(D-201).[Fe(MoO_(x))]-D-201 shows 93.7%adsorption capacity(28.3 mg/g)for phosphate even when the molar concentration of coexisting ions is 5 times higher than phosphate.The capacity of adsorbent is maintained more than 84.2%after five regeneration cycles to remove phosphate in the wastewater containing coexisting ions.The ability of highly selective removal of phosphate is maintained during the regeneration cycles explained by the change of the binding of molybdate clusters with phosphate,which is due to the different structures of molybdate clusters depending on various pH.In general,this work puts forward a new idea for the development of phosphorus removal adsorbents for the treatment of wastewater containing coexisting ions.展开更多
Removal and recovery of phosphorus(P) from wastewater is of great importance to addressing the challenges of eutrophication and phosphorus shortage. The P removal and recovery performance of conventional electrochemic...Removal and recovery of phosphorus(P) from wastewater is of great importance to addressing the challenges of eutrophication and phosphorus shortage. The P removal and recovery performance of conventional electrochemical precipitation approach was constrained by the limited mass transfer rate. Herein,a cathodic membrane filtration(CMF) reactor was developed using Ti/SnO_(2)-Sb anode and titanium mesh cathodic membrane module to achieve efficient removal and recovery of P in wastewater. Compared with the flow-by mode, the CMF system in the flow-through mode exhibited excellent P removal performance due to the markedly enhanced mass transfer. At the current density of 4 A/m^(2), membrane flux of 16.6 L m^(-2)h^(-1), and Ca/P molar ratio of 1.67, the removal efficiency of P was 96.2% and the energy consumption was only 45.7 k Wh/kg P. The local high p H of cathode surface played a vital role in P removal,which substantially accelerated the nucleation of calcium phosphate(Ca P). Based on the crystalline and morphological characterization of the precipitates, the hydroxyapatite was the most stable crystalline phase of Ca P, which was transformed from intermediate phases(such as dicalcium phosphate and amorphous calcium phosphate). This study paves the way for applying electrochemical membrane filtration system for P removal and recovery from wastewater.展开更多
A weak-base adsorption fiber,acrylic amine fiber(AAF),was prepared for removal and recovery of phosphate from water.The adsorption properties of the AAF for phosphate and effects of co-existing ions were investigated ...A weak-base adsorption fiber,acrylic amine fiber(AAF),was prepared for removal and recovery of phosphate from water.The adsorption properties of the AAF for phosphate and effects of co-existing ions were investigated using batch and column filtration experiments,scanning electron microscope,and Fourier transform infrared techniques.Experimental results showed that AAF had a high phosphate adsorption capacity of 119 mg/g at pH 7.0.The effects of calcium,sulfate,carbonate,nitrate,and fluoride showed that sulfate and calcium inhibited phosphate adsorption.However,AAF showed higher binding affinity toward phosphate than sulfate.Column filtration results showed that AAF could filter 1420 bed volumes of tap water containing 1.0 mg-P/L of phosphate.The saturated AAF could be regenerated using 0.5 mol/L hydrochloric acid solution and reused.After desorption,phosphate was recovered through precipitation of hydroxyapatite(Ca5(PO4)3OH).The easy of regeneration,good adsorption performance,and the fiber morphology of AAF make it an attractive alternative for phosphate recovery from multiple water sources.展开更多
The development of biochar-based granule-like adsorbents suitable for scaled-up application has been attracting increasing attention in the field of water treatment.Herein,a new formable porous granulated biochar load...The development of biochar-based granule-like adsorbents suitable for scaled-up application has been attracting increasing attention in the field of water treatment.Herein,a new formable porous granulated biochar loaded with La-Fe(hydr)oxides/montmorillonite(LaFe/MB)was fabricated via a granulation and pyrolysis process for enhanced phosphorus(P)removal from wastewater.Montmorillonite acted as a binder that increased the size of the granulated biochar,while the use of Fe promoted the surface charge and facilitated the dispersion of La,which was responsible for selective phosphate removal.LaFe/MB exhibited rapid phosphate adsorption kinetics and a high maximum adsorption capacity(Langmuir model,52.12 mg P g^(−1)),which were better than those of many existing granulated materials.The desorption and recyclability experiments showed that LaFe/MB could be regenerated,and maintained 76.7%of its initial phosphate adsorption capacity after four adsorption cycles.The high hydraulic endurance strength retention rate of the developed material(91.6%)suggested high practical applicability in actual wastewater.Electro-static attraction,surface precipitation,and inner-sphere complexation via ligand exchange were found to be involved in selective P removal over a wide pH range of 3-9.The thermodynamic parameters were determined,which revealed the feasibility and spontaneity of adsorption.Based on approximate site energy distribution analyses,high distribution frequency contributed to efficient P removal.The research results provide a new insight that LaFe/MB shows great application prospects for advanced phosphate removal from wastewater.展开更多
The adsorption capacities of Y zeolite and La (III)-modified Y zeolite were studied. A series of La(III)- modified Y zeolites with different La/Y zeolite mass ratios were characterized by X-ray diffi'action, X-ra...The adsorption capacities of Y zeolite and La (III)-modified Y zeolite were studied. A series of La(III)- modified Y zeolites with different La/Y zeolite mass ratios were characterized by X-ray diffi'action, X-ray fluores- cence and Brunauer-Emmett-Teller surface area analysis. Batch experiments were conducted to evaluate the effects of various experimental parameters, such as pH, ionic strength, coexisting anions (CO32 , Cl-, SO24- and NO3-) and temperature, on the phosphate adsorption. The capacity of the La (III)-modified Y zeolite to remove phosphate increased as the La/Y zeolite mass ratio increased and after 4 h, a phosphate removal efficiency of 95% was achieved for a La/Y zeolite mass ratio of 0.10. The equilibrium adsorption isotherm data correlated better to the Langmuir model than the Freundlich model and the data followed a pseudo-second-order kinetic equation.展开更多
Introduction:Considering the problem of eutrophication of the water bodies,phosphate removal from water has emerged as a research of topical interest.The present study aims to investigate the efficacy of Canna lily-ba...Introduction:Considering the problem of eutrophication of the water bodies,phosphate removal from water has emerged as a research of topical interest.The present study aims to investigate the efficacy of Canna lily-based constructed wetland to remove phosphate from wastewater.The translocation of phosphate in plant tissue and its biochemical transformation in sediments is also studied to understand its accumulation and recirculation within the system.Results:The removal of phosphate stabilized at around 50%in the present study and plant uptake was found to be the major removal mechanism.Average removal was 167 mg/m2 day for total phosphate and 84 mg/m2 day for available phosphate for an initial loading rate of 200 mg/m2 day and 85 mg/m2 day,respectively,at a HRT of 24 h.Most of the phosphate concentrated in above ground tissue of plant and its relative accumulation was maximum in flowers.Fractionation of phosphate in sediments confirmed removal by sediments with an accumulation of apatite phosphate(Ca and Mg bound),but release of non-apatite form(Fe and Al bound).Conclusion:The study concludes that Canna-based constructed wetland can be an effective tool for phosphate removal from wastewater and sediments particularly under tropical conditions.Regular harvesting of above ground tissue of Canna can result in nutrient export from the system,whereas autochthonous addition may result in recirculation.展开更多
Effective control of eutrophication is generally established through the reduction of nutrient loading into waterways and water bodies. An economically viable and ecologically sustainable approach to nutrient pollutio...Effective control of eutrophication is generally established through the reduction of nutrient loading into waterways and water bodies. An economically viable and ecologically sustainable approach to nutrient pollution control could involve the integration of retention ponds, wetlands and greenways into water management systems. Plants not only play an invaluable role in the assimilation and removal of nutrients, but they also support fauna richness and can be aesthetically pleasing. Pandanus amaryllifolius, a tropical terrestrial plant, was found to establish well in hydrophytic conditions and was highly effective in remediating high nutrient levels in an aquatic environment showing 100% removal of NO^-N up to 200 mg/L in 14 days. Phosphate uptake by the plant was less efficient with 64% of the PO4-P removed at the maximum concentration of 100 mg/L at the end of 6 weeks. With its high NO^-N and PO43--P removal efficiency, P. amaryllifolius depleted the nutrient-rich media and markedly contained the natural colonization of algae. The impediment of algal growth led to improvements in the water quality with significant decreases in turbidity, pH and electrical conductivity. In addition, the plants did not show stress symptoms when grown in high nutrient levels as shown by the changes in their biomass, total soluble proteins and chlorophyll accumulation as well as photochemical efficiency. Thus, P. amaryUifolius is a potential candidate for the mitigation of nutrient pollution in phytoremediation systems in the tropics as the plant requires low maintenance, is tolerant to the natural variability of weather conditions and fluctuating hydro-periods, and exhibit good nutrient removal capabilities.展开更多
文摘In this work, a series of hierarchical flower-like magnesium oxide(MgO) adsorbents were successfully fabricated in a cetyltrimethylammonium bromide(CTAB) assisted solvothermal route using hexamethylenetetramine(HMTA) as a precipitating agent. Effects of CTAB feeding amount on the structure, morphology, pore structure, and corresponding adsorption behavior were investigated. The hierarchical gardenias flower-like MgO demonstrated a surface area of 336.54 m^(2)·g^(-1) at a minimum ratio of the CTAB/Mg^(2+)was 0.02 in the reaction system. The hierarchical MgO phosphate removal capacity was 348.32 mg·g^(-1), which followed the pseudo-second-order and Freundlich isotherm model obtained from the large surface area and appropriate pore size. The value of n also suggests the feasible nature of phosphate adsorption under the examined conditions. Indeed, this CTAB assisted solvothermal method can provide a new understanding to tune the desired properties of a material by merely adjusting the reaction parameters of MgO.
基金This work is financially supported by the National Science Foundation of Tianjin(17JCYBJC23300).
文摘Phosphate removal is crucial for eutrophication control and water quality improvement.Electro-assisted adsorption,an eco-friendly elec-trosorption process,exhibited a promising potential for wastewater treatment.However,there are few works focused on phosphate electro-sorption,and reported electrodes cannot attach satisfactory removal capacities and rates.Herein,electro-assisted adsorption of phosphate via in-situ construction of La active centers on hierarchically porous carbon(LaPC)has been originally demonstrated.The resulted LaPC composite not only possessed a hierarchically porous structure with uniformly dispersed La active sites,but also provided good conductivity for interfacial electron transfer.The LaPC electrode achieved an ultrahigh phosphate electrosorption capability of 462.01 mg g^(-1) at 1 V,outperforming most existing electrodes.The superior phosphate removal performance originates from abundant active centers formed by the coupling of electricfield and capture sites.Besides,the stability and selectivity toward phosphate capture were maintained well even under comprehensive conditions.Moreover,a series of kinetics and isotherms models were employed to validate the electrosorption process.This work demonstrates a deep understanding and promotes a new level of phosphate electrosorption.
基金Project supported by the National Natural Science Foundation of China (No.40673003).
文摘Red mud is the waste of alumina industry and has high TiO2 and Fe2O3 content which are active components for the adsorption of anion pollutants. In this study, the uptake of phosphate by red mud activated by heat treatment and acid-heat treatment was investigated. The factors influencing the adsorption were also investigated. The result showed that the red mud sample treated using acid-heat method at 80℃ with 0.25 mol/L HCl for 2 h achieved the highest phosphate removal. For the heat-activated red mud, the sample heated at 700℃ for 2 h preformed better than the other heat treatment. Phosphate removal by the activated red mud was significantly pH dependent, and pH 7 was the optimal pH for phosphate removal. The adsorption fits Langmuir isotherm model well and the maximum adsorption capacities of the acid-heat activated red mud and the heat activated samples were 202.9 mgP/g and 155.2 mgP/g, respectively.
基金financially supported by the National Key R&D Program of China(No.2016YFC0400804)
文摘For the removal of phosphate(PO43-) from water, an adsorbent was prepared via carbonization of sewage sludge from a wastewater treatment plant: carbonized sludge adsorbent(CSA). The mechanism of phosphate removal was determined after studying the structure and chemical properties of the CSA and its influence on phosphate removal. The results demonstrate that phosphate adsorption by the CSA can be fitted with the pseudo second-order kinetics and Langmuir isotherm models, indicating that the adsorption is single molecular layer adsorption dominated by chemical reaction. The active sites binding phosphate on the surface are composed of mineral particles containing Si/Ca/Al/Fe. The mineral containing Ca, calcite, is the main factor responsible for phosphate removal. The phosphate removal mechanism is a complex process including crystallization via the interaction between Ca2+ and PO43-; formation of precipitates of Ca2+, Al3+, and PO43-; and adsorption of PO43-on some recalcitrant oxides composed of Si/Al/Fe.
基金Project supported by the National Natural Science Foundation of China(21271062)。
文摘In this study,hierarchical Ag/La2 O2 CO3 micro/nanostructures(MNSs)were synthesized by in situ loading Ag nanoparticles(NPs)on the surface of the La2 O2 CO3 MNSs.The prepared La2 O2 CO3 MNSs present flower-like shape and can be tuned by the molar ratio of La(NO3)3 and CO(NH2)2.In the molar ratio of 1:2 to 1:55,the La2 O2 CO3 MNSs mainly consist of polyhedral rods,irregular rods and irregular spindles and their size is about 10,8 and 7μm,respectively.After loading Ag NPs,the spindle-like Ag/La2 O2 CO3 MNSs were used for phosphate removal and antibacterial activity.At the initial phosphate concentration of20 mg/L,the removal rate is 59.6%.The Ag/La2 O2 CO3 MNSs have significant antibacterial activity and their MIC values for S.aureus and E.coli are 31.3 and 15.6μg/mL,respectively.The results indicate that Ag/La2 O2 CO3 MNSs may have good application prospects in open water to inhibit bacterial growth.
基金We are grateful for the project grants supported by the Major Science and Technology Programs for Water Pollution Control and Management of China(Nos.2012ZX07205-001 and 2017ZX7103-007).
文摘This study focuses on identifying the factors under which mixed microbial seeds assist bio-chemical denitrification when Scrap Iron Filings(SIF)are used as electron donors and adsorbents in low C/N ratio waters.Batch studies were conducted in abiotic and biotic reactors containing fresh and aged SIF under different dissolved oxygen concentrations with NO_(3)^(-)−N and/or PO_(4)^(3−)influent(s)and their nitrate/phosphate removal and by-product formations were studied.Batch reactors were seeded with a homogenized mixed microbial inoculum procured from natural sludges which were enriched over 6 months under denitrifying conditions in the presence of SIF.Results indicated that when influent containing 40 mg/L of NO_(3)^(-)−N was treated with 5 g SIF,79.9%nitrate reduction was observed in 8 days abiotically and 100%removal was accomplished in 20 days when the reactor was seeded.Both abiotic and seeded reactors removed more than 92%PO_(4)^(3−)under high DO conditions in 12 days.Abiotic and biochemical removal of NO_(3)^(-)−N and abiotic removal of PO_(4)^(3−)were higher under independent NO_(3)^(-)−N/PO_(4)^(3−)loading,while 99%PO_(4)^(3−)was removed biochemically under combined NO_(3)^(-)−N and PO_(4)^(3−)loading.This study furthers the understandings of nitrate and phosphate removal in Zero Valent Iron(ZVI)assisted mixed microbial systems to encourage the application of SIF-supported bio-chemical processes in the simultaneous removals of these pollutants.
文摘The oily wastewater generated from pretreatment unit of electrocoating industry contains oils, phosphate, organic solvents, and surfactants. In order to improve the removal efficiencies of phosphate and oils, to mitigate the membrane fouling, coagulation for ceramic membrane microfiltration of oily wastewater was performed. The results of filtration tests show that the membrane fouling decreased and the permeate flux and quality increased with coagulation as pretreatment. At the coagulant Ca (OH)2 dosage of 900 mg/L, the removal efficiency of phosphate was increased from 46.4% without coagulation to 99.6%; the removal of COD and oils were 97.0% and 99.8%, respectively. And the permeate flux was about 70% greater than that when Ca(OH)2 was not used. The permeate obtained from coagulation and microfiltration can be reused as make-up water, and the recommended operation conditions for pilot and industrial application are transmembrane pressure of 0.10 MPa and cross-flow velocity of 5 m/s. The comparison results show that 0.2 μm ZrO2 microfilter with coagulation could be used to perform the filtration rather than conventional ultrafilter, with very substantial gain in flux and removal efficiency of phosphate.
基金Supported by Key Project of Social Development Basic Research of Yunnan Provincial Science and Technology Department(2009cc025)
文摘[ Objective] The study aimed at discussing the purification effect of constructed wetlands for treating river water flowing from phosphate mine areas into Fuxian Lake. [Method] The running parameters of the constructed wetlands were investigated for one year, and the purification effect of the constructed wetlands for treating the sewage from phosphate mine areas was analyzed. [Result] With the aid of the constructed wet- land, the average removal rates of total nitrogen (TN), total phosphorus (TP) and CODcr were 52%, 32% and 54%, and the removal effects were best when the designed hydraulic load was 0.67 m3/( m2 · d). Running stably for six years, the constructed wetlands had advantages of no power, low resistance and high removal rate. [ Conclusion] The constructed wetlands reduced the load of pollutants from phosphate mine areas into Fuxian Lake effectivelv, which Dlaved important roles in the Drotection of water aualitv of Fuxian Lake.
基金supported by the Technological Support Plan Foundation of Jiangsu Province of China(No.BE2011834)
文摘Alkaline residue (AR) was found to be an efficient adsorbent for phosphate removal from wastewater. The kinetic and equilibrium of phosphate removal were investigated to evaluate the performance of modified alkaline residue. After treatment by NaOH (AR-NaOH), removal performance was significantly improved, while removal performance was almost completely lost after treatment by HCI (AR-HC1). The kinetics of the removal process by all adsorbents was well characterized by the pseudo second-order model. The Langmuir model exhibited the best correlation for AR-HC1, while AR was effectively described by Freundlich model. Both models were well fitted to AR-NaOH. The maximum adsorption capacities calculated from Langmuir equation were in following manner: AR-NaOH 〉 AR 〉 AR-HC1. Phosphate removal by alkaline residue was pH dependent process. Mechanisms for phosphate removal mainly involved adsorption and precipitation, varied with equilibrium pH of solution. For AR-HCI, the acid equilibrium pH (〈 6.0) was unfavorable for the formation of Ca-P precipitate, with adsorption as the key mechanism for phosphate removal. In contrast, for AR and AR- NaOH, precipitation was the dominant mechanism for phosphate removal, due to the incrase on pH (〉 8.0) after phosphate removal. The results of both XRD and SEM analysis confirmed CaHPOa.2H20 formation after phosphate removal by AR and AR-NaOH.
基金supported by Natural Science Foundation of China(21706178)"utilization of low rank coal"Strategic Leading Special Fund,Strategic Leading Special Fund of CAS(XDA-07070800,XDA-07070400)the Opening Foundation of State Key Laboratory of Coal Conversion(J16-17-602)
文摘Fe_3O_4@SiO_2 magnetic nanoparticles functionalized with mesoporous cerium oxide(Fe_3O_4@SiO_2@mCeO_2) was fabricated as a novel adsorbent to remove phosphate from water. The prepared adsorbent was characterized by X-ray diffractometry(XRD), transmission electron microscopy(TEM), nitrogen adsorption-desorption and vibrating sample magnetometry(VSM), and its phosphate removal performance was investigated through the batch adsorption studies. Characterization results confirmed that mesoporous cerium oxide was successfully assembled on the surface of Fe_3O_4@SiO_2 nanoparticles, and the synthesized adsorbent possessed a typical core-shell structure with a BET surface area of 195 m^2/g, accessible mesopores of 2.6 nm, and the saturation magnetization of 21.11 emu/g. The newly developed adsorbent had an excellent performance in adsorbing phosphate, and its maximum adsorption capacity calculated from the Langmuir model was 64.07 mg/g. The adsorption was fast, and the kinetic data could be best fitted with the pseudo-second-order kinetic model. The phosphate removal decreased with the increase of solution pH(2 to 10), while the higher ionic strength slightly promoted the phosphate adsorption. The presence of Cl~– and SO^(2–)_4 could enhance the adsorption of phosphate whereas HCO~–_ 3 had interfering effect on the phosphate adsorption. The adsorption mechanism was studied by analyzing Zeta potential and FTIR spectroscopy, and the results indicated that the replacement of the surface hydroxyl groups by phosphate ions with the formation of inner-sphere complex played a key role in the phosphate adsorption. The spent adsorbent could be quickly separated from aqueous solution with the assistance of the external magnetic field, and the adsorbed phosphate could be effectively desorbed using a 1 mol/L NaOH solution.
基金supported by the National Natural Science Foundation of China(Nos.52070100,51978341)the Natural Science Foundation of Jiangsu Province of China(No.BK20190087).
文摘The existence of many anions in wastewater reduces the removal efficiency of phosphate by adsorbents under realistic conditions.Facing this challenge,the study reports on an insistent and stable composite adsorbent of molybdate complexes Fe-(MoO_(x))embedded in a macroporous anion exchange resin(D-201).[Fe(MoO_(x))]-D-201 shows 93.7%adsorption capacity(28.3 mg/g)for phosphate even when the molar concentration of coexisting ions is 5 times higher than phosphate.The capacity of adsorbent is maintained more than 84.2%after five regeneration cycles to remove phosphate in the wastewater containing coexisting ions.The ability of highly selective removal of phosphate is maintained during the regeneration cycles explained by the change of the binding of molybdate clusters with phosphate,which is due to the different structures of molybdate clusters depending on various pH.In general,this work puts forward a new idea for the development of phosphorus removal adsorbents for the treatment of wastewater containing coexisting ions.
基金National Natural Science Foundation of China (Nos. 51925806&51838009)the Shanghai Sailing Program(No. 22YF1450700)for the financial support。
文摘Removal and recovery of phosphorus(P) from wastewater is of great importance to addressing the challenges of eutrophication and phosphorus shortage. The P removal and recovery performance of conventional electrochemical precipitation approach was constrained by the limited mass transfer rate. Herein,a cathodic membrane filtration(CMF) reactor was developed using Ti/SnO_(2)-Sb anode and titanium mesh cathodic membrane module to achieve efficient removal and recovery of P in wastewater. Compared with the flow-by mode, the CMF system in the flow-through mode exhibited excellent P removal performance due to the markedly enhanced mass transfer. At the current density of 4 A/m^(2), membrane flux of 16.6 L m^(-2)h^(-1), and Ca/P molar ratio of 1.67, the removal efficiency of P was 96.2% and the energy consumption was only 45.7 k Wh/kg P. The local high p H of cathode surface played a vital role in P removal,which substantially accelerated the nucleation of calcium phosphate(Ca P). Based on the crystalline and morphological characterization of the precipitates, the hydroxyapatite was the most stable crystalline phase of Ca P, which was transformed from intermediate phases(such as dicalcium phosphate and amorphous calcium phosphate). This study paves the way for applying electrochemical membrane filtration system for P removal and recovery from wastewater.
基金the China Scholarship Council to support the fellowship to Jinshan Wei
文摘A weak-base adsorption fiber,acrylic amine fiber(AAF),was prepared for removal and recovery of phosphate from water.The adsorption properties of the AAF for phosphate and effects of co-existing ions were investigated using batch and column filtration experiments,scanning electron microscope,and Fourier transform infrared techniques.Experimental results showed that AAF had a high phosphate adsorption capacity of 119 mg/g at pH 7.0.The effects of calcium,sulfate,carbonate,nitrate,and fluoride showed that sulfate and calcium inhibited phosphate adsorption.However,AAF showed higher binding affinity toward phosphate than sulfate.Column filtration results showed that AAF could filter 1420 bed volumes of tap water containing 1.0 mg-P/L of phosphate.The saturated AAF could be regenerated using 0.5 mol/L hydrochloric acid solution and reused.After desorption,phosphate was recovered through precipitation of hydroxyapatite(Ca5(PO4)3OH).The easy of regeneration,good adsorption performance,and the fiber morphology of AAF make it an attractive alternative for phosphate recovery from multiple water sources.
基金National Key Research and Development Program of China(2021YFD1700805)National Natural Science Foundation of China(41807132,22078136,41877090)the Jiangsu Province Agricultural Independent Innovation Fund(CX(19)2003).
文摘The development of biochar-based granule-like adsorbents suitable for scaled-up application has been attracting increasing attention in the field of water treatment.Herein,a new formable porous granulated biochar loaded with La-Fe(hydr)oxides/montmorillonite(LaFe/MB)was fabricated via a granulation and pyrolysis process for enhanced phosphorus(P)removal from wastewater.Montmorillonite acted as a binder that increased the size of the granulated biochar,while the use of Fe promoted the surface charge and facilitated the dispersion of La,which was responsible for selective phosphate removal.LaFe/MB exhibited rapid phosphate adsorption kinetics and a high maximum adsorption capacity(Langmuir model,52.12 mg P g^(−1)),which were better than those of many existing granulated materials.The desorption and recyclability experiments showed that LaFe/MB could be regenerated,and maintained 76.7%of its initial phosphate adsorption capacity after four adsorption cycles.The high hydraulic endurance strength retention rate of the developed material(91.6%)suggested high practical applicability in actual wastewater.Electro-static attraction,surface precipitation,and inner-sphere complexation via ligand exchange were found to be involved in selective P removal over a wide pH range of 3-9.The thermodynamic parameters were determined,which revealed the feasibility and spontaneity of adsorption.Based on approximate site energy distribution analyses,high distribution frequency contributed to efficient P removal.The research results provide a new insight that LaFe/MB shows great application prospects for advanced phosphate removal from wastewater.
基金The authors are also grateful to the Tianjin Natural Science Foundation (No. 12JCYBJ14000) for providing financial assistance for this investigation.
文摘The adsorption capacities of Y zeolite and La (III)-modified Y zeolite were studied. A series of La(III)- modified Y zeolites with different La/Y zeolite mass ratios were characterized by X-ray diffi'action, X-ray fluores- cence and Brunauer-Emmett-Teller surface area analysis. Batch experiments were conducted to evaluate the effects of various experimental parameters, such as pH, ionic strength, coexisting anions (CO32 , Cl-, SO24- and NO3-) and temperature, on the phosphate adsorption. The capacity of the La (III)-modified Y zeolite to remove phosphate increased as the La/Y zeolite mass ratio increased and after 4 h, a phosphate removal efficiency of 95% was achieved for a La/Y zeolite mass ratio of 0.10. The equilibrium adsorption isotherm data correlated better to the Langmuir model than the Freundlich model and the data followed a pseudo-second-order kinetic equation.
文摘Introduction:Considering the problem of eutrophication of the water bodies,phosphate removal from water has emerged as a research of topical interest.The present study aims to investigate the efficacy of Canna lily-based constructed wetland to remove phosphate from wastewater.The translocation of phosphate in plant tissue and its biochemical transformation in sediments is also studied to understand its accumulation and recirculation within the system.Results:The removal of phosphate stabilized at around 50%in the present study and plant uptake was found to be the major removal mechanism.Average removal was 167 mg/m2 day for total phosphate and 84 mg/m2 day for available phosphate for an initial loading rate of 200 mg/m2 day and 85 mg/m2 day,respectively,at a HRT of 24 h.Most of the phosphate concentrated in above ground tissue of plant and its relative accumulation was maximum in flowers.Fractionation of phosphate in sediments confirmed removal by sediments with an accumulation of apatite phosphate(Ca and Mg bound),but release of non-apatite form(Fe and Al bound).Conclusion:The study concludes that Canna-based constructed wetland can be an effective tool for phosphate removal from wastewater and sediments particularly under tropical conditions.Regular harvesting of above ground tissue of Canna can result in nutrient export from the system,whereas autochthonous addition may result in recirculation.
基金the support & contributions of the Singapore-Delft Water Alliance (SDWA)
文摘Effective control of eutrophication is generally established through the reduction of nutrient loading into waterways and water bodies. An economically viable and ecologically sustainable approach to nutrient pollution control could involve the integration of retention ponds, wetlands and greenways into water management systems. Plants not only play an invaluable role in the assimilation and removal of nutrients, but they also support fauna richness and can be aesthetically pleasing. Pandanus amaryllifolius, a tropical terrestrial plant, was found to establish well in hydrophytic conditions and was highly effective in remediating high nutrient levels in an aquatic environment showing 100% removal of NO^-N up to 200 mg/L in 14 days. Phosphate uptake by the plant was less efficient with 64% of the PO4-P removed at the maximum concentration of 100 mg/L at the end of 6 weeks. With its high NO^-N and PO43--P removal efficiency, P. amaryllifolius depleted the nutrient-rich media and markedly contained the natural colonization of algae. The impediment of algal growth led to improvements in the water quality with significant decreases in turbidity, pH and electrical conductivity. In addition, the plants did not show stress symptoms when grown in high nutrient levels as shown by the changes in their biomass, total soluble proteins and chlorophyll accumulation as well as photochemical efficiency. Thus, P. amaryUifolius is a potential candidate for the mitigation of nutrient pollution in phytoremediation systems in the tropics as the plant requires low maintenance, is tolerant to the natural variability of weather conditions and fluctuating hydro-periods, and exhibit good nutrient removal capabilities.