Phosphotungstic acid immobilized on amino-functionalized TS-1 zeolite as a solid acid catalyst for the synthesis of tributyl citrate

The amino-functionalization of TS-1 zeolite followed by immobilization of phosphotungstic acid(HPW)was presented to prepare a strong solid acid catalyst for the synthesis of bio-based tributyl citrate from the esterification of citric acid and n-butanol.γ-Aminopropyltriethoxysilane(APTES)was first grafted on the TS-1 zeolite via the condensation reactions with surface hydroxyl groups,and subsequently the HPW was immobilized via the reaction between the amino groups and the protons from HPW-forming strong ionic bonding.The Keggin structure of HPW and MFI topology of TS-1 zeolite were well maintained after the modifications.The amino-functionalization generated abundant uniformly distributed active sites on TS-1 for HPW immobilization,which promoted the dispersity,abundance,as well as the stability of the acid sites.The tetrahedrally coordinated framework titanium and non-framework titania behaved as weak Lewis acid sites,and the protons from the immobilized HPW acted as the moderate or strong Brønsted acid sites.An optimized TBC yield of 96.2%(mol)with a conversion of-COOH of 98.1%(mol)was achieved at 150℃for 6 h over the HPW immobilized on amino-functionalized TS-1.The catalyst exhibited good stability after four consecutive reaction runs,where the activity leveled off at still a relatively high level after somewhat deactivation possibly caused by the leaching of a small portion of weakly anchored APTES or HPW.

Facile synthesis of efficient pentaethylenehexamine-phosphotungstic acid heterogeneous catalysts for oxidative desulfurization

The ultra-deep desulfurization of oil needs to be solved urgently due to various problems,including environmental pollution and environmental protection requirements.Oxidative desulfurization(ODS)was considered to be the most promising technology.The facile synthesis of highly efficient and stable HPW-based heterogeneous catalysts for oxidative desulfurization is still a challenging task.In this paper,pentamethylene hexamine(PEHA)and phosphotungstic acid(HPW)were combined by a simple one-step method to prepare a heterogeneous catalyst of PEHA-HPW for the production of ultra-deep desulfurization fuel oil.The composite material exhibited excellent catalytic activity and high recyclability,which could reach a 100% dibenzothiophene(DBT)removal rate in 30 min and be recycled at least 5 times.Experiments and DFT simulations were used to better examine the ODS mechanism of PEHA-HPW.It was proved that the rich amino groups on the surface of PEHA-HPW play a crucial role.This work provides a simple and feasible way for the manufacture of efficient HPW-based catalysts.

Encapsulation of ionic liquid, phosphotungstic acid inside the nanocages of MIL-101(Cr): Effective and reusable catalyst for efficient solvent-free oxidative desulfurization from fuel oil

Oxidative desulfurization from fuel oil is one of the important methods for deep desulfurization.The development of efficient oxidative desulfurization catalysts is crucial for improving the desulfurization performance.Successful encapsulation of phosphotungstic acid(HPW)and ionic liquid(BMImBr)inside the mesoporous cages of MIL-101(Cr)was accomplished through a combination of“bottle around ship”and“ship in bottle”methods.The obtained BMImPW@MIL-101(Cr)composite was characterized by XRD,FTIR,BET,SEM,XPS and ICP methods.Results indicated that the BMImPW@MIL-101(Cr)composites with PW^(3−) loading of 23.1–50.7 wt%were obtained,demonstrating that the“bottle around ship”method is beneficial to make full use of nanocages of MIL-101(Cr)to obtain expected high loading of active PW^(3−) .The BMImPW@MIL-101(Cr)exhibits excellent reusability with no evidence of leaching of active PW^(3−) and BMIm^(+),and well-preserved structure after successive cycles of regeneration and reuse.The significantly improved stability of BMImPW@MIL-101(Cr)as compared to HPW@MIL-101(Cr)is possibly because the leaching of the active PW^(3−) −sites can be greatly suppressed by forming large size of BMImPW owing to introduction of BMIm^(+)cation.The BMImPW@MIL-101(Cr)exhibited excellent catalytic activity for solvent free oxidative desulfurization of refractory sulfides.The enhanced oxidative desulfurization activity as compared to HPW@MIL-101(Cr)can be explained by the intimate contact of sulfides with active PW^(3−) sites owing the strong attraction of BMIm^(+)cation with the sulfides.

Study on the epoxidation of olefins with H_(2)O_(2)catalyzed by biquaternary ammonium phosphotungstic acid

Selective epoxidation of olefins is an important field in chemical industry.In this work,we developed a new phosphotungstic acid catalyst{[(C_8H_(17))(CH_(3))_(2)N]_(2)(CH_(2))_(3)}_(1.5){PO_(4)[WO(O_(2))_(2)]_(4)}with long carbon chain and biquaternary ammonium cation.Cyclohexene could be epoxidized to cyclohexene oxide in 96.3%conversion and 98.2%selectivity.The catalyst type,solvent type,catalyst loading,initial molar ratio,temperature,cycle performance and substrate extensibility were studied and optimized,the kinetic parameters about overall reaction and unit reaction were also calculated.Dynamic light scattering analysis was carried out to explain the different catalytic performance between catalysts with different carbon chain length.This novel catalyst and the corresponding dynamics and mechanism study could probably help the industrial application on the epoxidation of cyclohexene with H_(2)O_(2).

Insight into the oxidative desulfurization of high-sulfur petroleum coke under mild conditions:a journey of vanadium-substituted Dawson-type phosphotungstic acid

High-sulfur petroleum coke(HSPC),that is a by-product from slag oil in the coking process of refning,shows versatility values in practical applications and,however,concentrates the majority of organic sulfur.Herein,we design and construct a highly efective CTAB@HPA composites to be explored for the catalytic oxidative desulfurization of HSPC under mild conditions using hydrogen peroxide as the oxidant and 1-butyl-3-methylimidazole tetrafuoroborate ionic liquid as the extractant.The results demonstrate that the sulfur content of HSPC could be strikingly reduced from 4.46 wt%to 2.48 wt%under 60℃ and atmospheric pressure,and that the organic sulfur in HSPC is mainly oxidized to sulfoxide,sulfone and sulfate,which latter can be directly separated from petroleum coke.Moreover,the efect of reaction conditions on the desulfurization performance of HSPC as well as the catalytic oxidation reaction kinetic of HSPC desulfurization was systematically investigated.Furthermore,a mechanism for the oxidative desulfurization of HSPC over CTAB@HPA catalysts was proposed.Therefore,this work provides new insight into how to construct active catalysts for the desulfurization of HSPC under mild conditions.

Synergistic Effect between Zr-MOF and Phosphotungstic Acid for Oxidative Desulfurization

PTA/UiO-66 composites were successfully synthesized by the hydrothermal method.The results showed that the synergistic effect between phosphotungstic acid(PTA)and UiO-66 could enhance the oxidative desulfurization(ODS)activity.The XRD results proved that UiO-66 retained its structure in the PTA/UiO-66 composites.The SEM results showed that the PTA/UiO-66 catalysts exhibited regular octahedral shape.The Raman spectra revealed that PTA in the composites retained the Keggin structure.The XPS results showed that the electron transfer occurred from Zr-MOF to PTA.The ODS reaction mechanism was discussed.Electrons transfer from Zr-MOF to PTA can promote the generation of active species(·OH)and thus enhance the ODS activity.This explanation can be confirmed by the formation of oxygen vacancy and W0 as revealed by the XPS analysis.

Three-dimensionally Ordered Macroporous Phosphotungstic Acid/SiO2 for Efficient Catalytic Oxidative Desulfurization

Three-dimensionally ordered（3DOM） macroporous phosphotungstic acid/SiO_2（HPW/SiO_2） materials were prepared by using colloidal crystal as templates and applied for oxidative desulfurization（ODS） of the model fuel oil. The obtained HPW/SiO_2 materials were characterized through scanning electron microscopy, powder X-ray diffraction, N_2 sorption, and Fourier transform infrared spectroscopy. The results indicated that 3 DOM HPW/SiO_2 possessed hierarchical pore architectures which contained ordered macropores and disordered mesopores, with the Keggin type HPW embedded in the framework of pore structure. The removal rate of dibenzothiophene（DBT） could reach 100% under the optimum conditions, moreover. The performance was only slightly decreased for the regenerated catalyst after 7 cycles.

A Direct Liquid Fuel Cell with High Power Density Using Reduced Phosphotungstic Acid as Redox Fuel

Direct liquid fuel cells(DLFCs)are proposed to address the problems of high cost and complex storage and transportation of hydrogen in traditional hydrogen-oxygen proton exchange membrane fuel cells.However,present fuels of organic small molecules used in DLFCs are restricted to problems of sluggish electrochemical kinetics and easily poisoning of precious metal catalysts.Herein,we demonstrate reduced phosphotungstic acid as a liquid fuel for DLFCs based on its advantages of high chemical and electrochemical stability,high electrochemical activity on common carbon material electrodes,and low permeability through proton exchange membranes.The application of phosphotungstic acid fuel effectively solves the problems of high cost of anode catalysts and serious fuel permeation loss in traditional DLFCs.A phosphotungstic acid fuel cell achieves a peak power density of466 mW cm^(-2)at a cell voltage of 0.42 V and good stability at current densities in the range from 20 to 200 mA cm^(-2).

Catalytic oxidative desulfurization of gasoline using phosphotungstic acid supported on MWW zeolite

Catalysts for the desulfurization of gasoline samples were synthesized via the immobilization of well-dispersed phosphotungstic acid(HPW)on Mobil compo-sition of matter-twenty-two(MWW)zeolite.Characteriza-tion results indicated that these catalysts possess a mesoporous structure with the retention of the Keggin structure of immobilized HPW.Relevant reaction para-meters influencing sulfur removal were systematically investigated,including HPW loading,catalyst dosage,temperature,initial S-concentration,molar ratio of oxidant to sulfide(O/S),volume ratio of MeCN to model oil(Ext./oil),and sulfide species.The 40 wt-%HPW/MWW catalyst exhibited the highest catalytic activity with 99.6%dibenzothiophene sulfur removal from prepared samples.The 40 wt-%HPW/MWW catalyst was recycled four times and could be easily regenerated.Finally,as an exploratory study,straight-run-gasoline and fluid catalytic cracking gasoline were employed to accurately evaluate the desulfurization performance of 40 wt-%HPW/MWW.Our research provides new insights into the development and application of catalysts for desulfurization of gasoline.

Ball-milling Synthesis of Tetrahydroquinolines via 'One-pot' Three-component Diels-Alder Reaction Catalyzed by Phosphotungstic Acid

We reported an economic and practical ball-milling method for the synthesis of tetrahvdroquinoline derivatives via a wone-pot"three-component Diels-Alder reaction of anilines,aldehydes and alkenes catalyzed by phos-photungstic acid at room temperature.For this reaction,a simple 'one-pot'ball-milling operation was conducted,readily available starting materials were employed,'one-pot'conditions were applied,and the most important was to use inexpensive and environmentally friendly catalyst phosphotungstic acid.Various tetrahvdroquinolines,which might be potentially applicable in the pharmaceutical and biochemical areas,were conveniently synthesized in moderate to excellent yields.

Synthesis,Characterization and Catalytic Application of H_3PW_(12)O_(40)/MCM-48 in the Esterification of Methacrylic Acid with n-butyl Alcohol

A novel environmental friendly catalyst, H3PW12O40/MCM-48, was prepared by impregnation method. The catalysts were characterized by means of XRD and FT-IR. The synthesis of n-butyl methacrylate catalyzed by H3PW12O40/MCM-48 was studied with methacrylic acid and n-butyl alcohol as reactants. H3PW12O40/MCM-48 is an excellent catalyst for synthesizing n-butyl methacrylate and Keggin structure of H3PW12O40 kept unchanged after being impregnated on surface of the molecular sieve support. Effects of n（methacrylic acid）：n（n-butyl alcohol）, catalyst dosage, cyclohexane（water-stripped reagent） and reaction time on yields of the product were investigated. The optimum conditions have been found, that is, molar ratio of acid to alcohol is 1：1.6, mass ratio of catalyst used to the reactants is 0.5% and reaction time is 2.0 h. Under these conditions, the yield of n-butyl methacrylate can reach 93.7%.

Styrene epoxidation catalyzed by polyoxometalate/quaternary ammonium phase transfer catalysts: The effect of cation size and catalyst deactivation mechanism

Catalytic epoxidation of alkenes is an important type of organic reaction in chemical industry,and the deep insight into catalyst deactivation will help to develop new epoxidation process.In this work,series of quaternary ammoniums bearing different cationic sizes,i.e.MTOA+(methyltrioctylammonium,[(C_(8)H_(17))_(3)CH_(3)N]+),HTMA+(hexadecyltrimethylammonium,[(C_(16)H_(33))(CH_(3))_(3)N]+) and DMDOA+(dimethyldioctadecylammonium,[(C_(18)H_(37))_(2)(CH_(3))_(2)N]+) were incorporated with polyoxometalate (POM) anions to prepare phase transfer catalysts (PTCs),which were used in the styrene epoxidations.Among them,(MTOA)_(3)PW_(4)O_(24)exhibits the best catalytic performance judged from the highest styrene conversion rate(52%) and styrene oxide selectivity (93%),during which the styrene epoxidation conditions were optimized.Meanwhile,the deactivation mechanism of this kind of PTCs was proposed firstly,i.e.in the case of low H_(2)O_(2) content,the oxidant can only be used in the styrene epoxidation,in which the catalyst can transform into stable Keggin-type POM.But when the content of H_(2)O_(2) is higher,the excess H_(2)O_(2) can reactivate the Keggin-type POM into active (PW_(4)O_(24))_(3)-anions,which can trigger the ring-opening polymerization of styrene oxide.Consequently,the catalyst is deactivated by adhered poly(styrene oxide)irreversibly,which was determined by NMR spectra.In this situation,the active moiety{PO_(4)[WO(O_(2))_(2)]_(4)}_(3)-in phase-transfer catalytic system can break into some unidentified species with low W/P ratio with the presence of epoxides.This work will be beneficial for the design of new PTCs in alkene epoxidation in fine chemical industry.

Catalytic synthesis of acetals and ketals with H3PW12O40/PAn

A new environmental friendly catalyst H3PW12O40/PAn was prepared and identified by means of FT-IR,XRD,and TG/DTA.The optimum conditions have been found;that is,the mass ratio of PAn to H3PW12O40 is 1：1.5,the volume of methanol is 20 mL,and the reflux reaction time is 3 h.The structural identity of Keggin units is preserved after the incorporation into polyaniline matrix.Catalytic activities of H3PW12O40/PAn in synthesizing 2-methyl-2-ethoxycarbonylmethyl-1,3-dioxolane,2,4-dimethyl-2-ethoxycarbonylmethyl-1,3-dioxolane,cyclohexanone ethylene ketal,cyclohexanone 1,2-propanediol ketal,butanone ethylene ketal,butanone 1,2-propanediol ketal,2-phenyl-1,3-dioxolane,4-methyl-2-phenyl-1,3-dioxolane,2-propyl-1,3-dioxolane,and 4-methyl-2-propyl-1,3-dioxolane were reported.It has been demon-strated that H3PW12O40/PAn is an excellent catalyst.Various factors concerned in these reactions were investigated.The optimum conditions are as follows：the molar ratio of aldehyde/ketone to glycol（r） is 1：1.5,the mass ratio of the catalyst used to the reactants is 0.6%,and the reaction time is 1.0 h.Under these conditions,the yield is as follows：2-methyl-2-ethoxycarbonylmethyl-1,3-dioxolane,69.0%;2,4-dimethyl-2-ethoxycarbonylmethyl-1,3-dioxolane,79.5%;cyclohexanone ethylene ketal,78.9%;cyclohexanone 1,2-propanediol ketal,85.3%;butanone ethylene ketal,56.9%;butanone 1,2-propanediol ketal,78.1%;2-phenyl-1,3-dioxolane,76.3%;4-methyl-2-phenyl-1,3-dioxolane,94.2%;2-propyl-1,3-dioxolane,70.7%;and 4-methyl-2-propyl-1,3-dioxolane,79.2%.

Synthesis of Bimodal Mesoporous TiO_(2)-PTA/BMMS and Its Enhanced Performance in the Photocatalytic Oxidative Desulfurization

With the bimodal mesoporous silica(BMMS)acting as the support and the composite of TiO2 with phosphotungstic acid(PTA)functioning as the active constituent,TiO_(2)-PTA/BMMS was synthesized by the two-step impregnation route.This catalyst was applied in the photocatalytic oxidative desulfurization(PODS)process,with dibenzothiophene serving as the model sulfur compound.PODS proceeds in one pot,in which H_(2)O_(2) acts as the oxidant and methanol plays the role of the solvent.TiO_(2)-PTA/BMMS was characterized by XRD,N_(2) adsorption and desorption,XRF,FTIR,UV-vis,SEM,EDS and TEM techniques.It showed that the introduction of PTA contributes higher order,higher surface area and pore volume to the bimodal mesoporous support.With TiO_(2)-PTA/BMMS used as the catalyst under the UV irradiation,the desulfurization rate can reach 99.6%.This result is obviously higher than that achieved by TiO_(2)/BMMS.The catalyst also has no significant drop in catalytic activity after eight runs of reusing.In such catalytic system,the synergistic effects of this photocatalytic oxidation and the extraction with the methanol serving as the solvent played an indispensable role.

[Hmim]_3PW_(12)O_(40):A high-efficient and green catalyst for the acetalization of carbonyl compounds

[Hmim]_3PW_(12)O_(40) was developed and used in the acetalization of carbonyl compounds in excellent yields.The ionic liquidheteropoly acid hybrid compound and reaction medium formed temperature-dependent phase-separation system with the ease of product as well as catalyst separation.The catalyst was recycled more than 10 times without any apparent loss of catalytic activity.

An Efficient Extraction-Free Method for Oxidative Desulfurization of Model Fuels Employing Cross-Linked Polyionic Liquid Phosphotungstate Catalysts

An efficient extraction-free oxidative desulfurization(ODS)process using a series of cross-linked polyionic liquid phosphotungstate(CLPIL-PW)catalysts is reported.The cross-linked PILs were prepared with DVB and 1-n-alkyl-3-vinyl imidazole hydrobromide(alkyl=ethyl,butyl,octyl,dodecyl),and were then assembled with phosphotungstic acid(H_(3)PW_(12)O_(40))to form the catalysts.The CLPIL-PWs have been applied to the oxidative removal of dibenzothiophene(DBT)from model oil with H_(2)O_(2) as an oxidant.The effects of ionic liquid(IL)cationic species,varying the DVB/IL molar ratio in the polymerization process,and varying operating conditions were investigated.The CLPIL-PWs were characterized by inductively coupled plasma(ICP)mass spectrometry,elemental analysis,scanning electron microscopy(SEM),Fourier transform infra-red(FTIR)spectroscopy,X-ray diffraction(XRD),^(13)C and^(31)P nuclear magnetic resonance(NMR)spectroscopy.The polydivinylbenzene-co-1-n-octyl-3-vinyl imidazole phosphotungstate(P(DVB-OVIm)PW)exhibited the highest DBT removal efficiency(99.9%)and remarkable recyclability,and could be reused eight times without reducing its activity.Finally,an extraction-free ODS mechanism is proposed.

A multi-functional Ru Mo bimetallic catalyst for ultra-efficient C3 alcohols production from liquid phase hydrogenolysis of glycerol

Ru and Mo bimetallic catalysts supported on active carbon modified by phosphotungstic acid(PW)were designed and applied in glycerol hydrogenolysis reaction.The physicochemical properties of the catalysts were characterized and the presence of active sites was investigated from the perspective of the glycerol hydrogenolysis performance.The MoOxis highly selective for the C—O bond cleavage of glycerol molecules,which can reasonably regulate the strong C—C bond cleavage activity of Ru nanoparticles.By using sequential deposition of Ru and Mo supported on mesoporous PW-C,the characterization results show that the combination of isolated low-valence MoOxwith metal Ru particles can form“MoOx-Ru-PW”,which provides highly catalytic activity toward C—O bond cleavage,selectively producing more C3 alcohols(mainly 1,2(3)-propanediol).The glycerol conversion of 1%Mo/Ru/PW-C catalyst was 59.6%,the selectivity of C3 alcohol was 96.1%,and the selectivity of propanediol(1,2(3)-propanediol)was 94.9%.It is noteworthy that the selectivity of 1,3-propanediol reached 20.7%when the PW was 21.07%(mass).This study provides experimental evidence for the tandem dehydration and hydrogenation mechanism of the multifunctional Mo/Ru/PW-C catalyst.

Photocatalytic synergistic biofilms enhance tetracycline degradation and conversion

Tetracyclines are refractory pollutants that cause persistent harm to the environment and human health.Therefore,it is urgently necessary to develop methods to promote the efficient degradation and conversion of tetracyclines in wastewater.This report proposes a photobiocatalytic synergistic system involving the coupling of GeO_(2)/Zn-doped phosphotungstic acid hydrate/TiO_(2)(GeO_(2)/Zn-HPW/TiO_(2))-loaded photocatalytic optical hollow fibers(POHFs)and an algalebacterial biofilm.The GeO_(2)/Zn-HPW/TiO_(2) photocatalyst exhibits a broad absorption edge extending to 1000 nm,as well as high-efficiency photoelectric conversion and electron transfer,which allow the GeO_(2)/Zn-HPW/TiO_(2)-coated POHFs to provide high light intensity to promote biofilm growth.The resulting high photocatalytic activity rapidly and stably reduces the toxicity and increases the biodegradability of tetracycline-containing wastewater.The biofilm enriched with Salinarimonas,Coelastrella sp.,and Rhizobium,maintains its activity for the rapid photocatalytic degradation and biotransformation of intermediates to generate the O_(2) required for photocatalysis.Overall,the synergistic photocatalytic biofilm system developed herein provides an effective and efficient approach for the rapid degradation and conversion of water containing high concentrations of tetracycline.

磷钨酸负载的非贵金属单原子催化剂:乙烯环氧化的理论研究

基于第一性原理,本文系统研究了过渡金属单原子(铁,钴,镍,钌,铑,钯,锇,铱,铂)负载在磷钨酸(PTA)催化剂上的几何和电子结构,并进一步研究了乙烯环氧化在铁单原子催化剂上的可能反应机理.我们发现PTA最可能结合过渡金属单原子的位置是四配位中空位.乙烯环氧化催化活性的理论计算表明,非贵金属Fe1-PTA具有可观的吸附能,这是引发此催化循环的关键物理量.我们进一步进行了铁单原子和PTA结合的成键分析,发现电荷从铁单原子转移到PTA团簇,并且强烈的Fe–O共价金属-载体相互作用(CMSI)是其高稳定性的基础.在催化剂Fe1-PTA上可能的乙烯环氧化催化机理共包括三步:1)氧气分子通过电荷转移吸附在Fe1-PTA上;2)第一个乙烯分子攻击吸附在Fe1-PTA上的氧气分子,随后形成C2H4O;3)表面吸附的氧原子和第二个乙烯分子生成C2H4O,完成催化循环.本研究发现,Fe1-PTA对于乙烯环氧化主要通过Eley-Rideal机理进行.本工作为发展高效多相非贵金属单原子乙烯环氧化催化剂提供了理论依据.

Fabrication and Photocatalytic Properties of Water-stable Ag/PW12/PVA Nanocomposites

A kind of water-stable phosphotungstic acid/polyvinyl alcohol（PWl2/PVA） fiber was prepared by thermal or chemical crosslinking treatments with the help of electrospinning, and silver nanoparticles（NPs） modified fibrous precursor was successfully obtained by photoreduced method. The nanocomposites were characterized by transfor- mation infrared spectroscopy（FTIR）, UV-Vis diffuse reflection spectroscopy（DRS）, field environmental scanning electron microscopy（FE-SEM）, transmission electron microscopy（TEM） and X-ray photoelectron spectroscopy（XPS）. The results indicate that the sizes of silver NPs are about 20 or 40 nm on thermally or glutaraldehyde（GA） vapor crosslinked PW12/PVA fiber, respectively. As a photocatalyst, PWI2/PVA fiber possesses high surface area to volume ratio, stable recyclability, and efficient transportation of electrons under visible light. The nanohybrids exhibit excel- lent photocatalytic activity for the degradation of Rhodamin B than PW^2/PVA nanofiber.