高校创办国际一流期刊的路径与实践—以Photonic Sensors为例

文章针对我国高校英文科技期刊数量与我国英文科技论文产出不匹配的问题,指出我国高校英文科技期刊发展面临机遇和挑战,并从专业化办刊、国际化办刊、推广策略三个方面阐述Photonic Sensors探索创办国际一流期刊的实践路径,以期为我国高校创办国际一流英文科技期刊提供参考。

High‑resolution silicon photonic sensor based on a narrowband microwave photonic flter

Microwave photonic sensors are promising for improving sensing resolution and speed of optical sensors.In this paper,a high-sensitivity,high-resolution temperature sensor based on microwave photonic flter(MPF)is proposed and demonstrated.A micro-ring resonator(MRR)based on silicon-on-insulator is used as the sensing probe to convert the wavelength shift caused by temperature change to microwave frequency variation via the MPF system.By analyzing the frequency shift with high-speed and high-resolution monitors,the temperature change can be detected.The MRR is designed with multi-mode ridge waveguides to reduce propagation loss and achieves an ultra-high Q factor of 1.01×10^(6).The proposed MPF has a single passband with a narrow bandwidth of 192 MHz.With clear peak-frequency shift,the sensitivity of the MPF-based temperature sensor is measured to be 10.22 GHz/℃.Due to higher sensitivity and ultra-narrow bandwidth of the MPF,the sensing resolution of the proposed temperature sensor is as high as 0.019℃.

The Design of Bending Long Period of Photonic Crystal Fiber Grating Sensors

The bending photonic crystal fiber grating sensor is an important role in underwater monitoring and fire alarm systems. It is studied that the resonant wavelength expression of bending long period photonic crystal fiber gratings is deduced, it is designed that a bending long period photonic crystal fiber grating sensor system, it is calculated in theory that between the bending long period photonic crystal fiber gratings sensor resonance wavelength and the grating period and the bending strain. The result is shown by calculating and analysing in theory, the grating curvature is increased by the increase of the bending strain of the grating, and the resonance wavelength of the grating sensor is drifted, the drift amount is increased, one in this grating, the drifted amount of the resonant wavelength is 0.014 nm.

Low-power SiPM readout BETA ASIC for space applications

The BETA application-specific integrated circuit(ASIC)is a fully programmable chip designed to amplify,shape and digitize the signal of up to 64 Silicon photomultiplier(SiPM)channels,with a power consumption of approximately~1 mW/channel.Owing to its dual-path gain,the BETA chip is capable of resolving single photoelectrons(phes)with a signal-to-noise ratio(SNR)>5 while simultaneously achieving a dynamic range of~4000 phes.Thus,BETA can provide a cost-effective solution for the readout of SiPMs in space missions and other applications with a maximum rate below 10 kHz.In this study,we describe the key characteristics of the BETA ASIC and present an evaluation of the performance of its 16-channel version,which is implemented using 130 nm technology.The ASIC also contains two discriminators that can provide trigger signals with a time jitter down to 400 ps FWHM for 10 phes.The linearity error of the charge gain measurement was less than 2%for a dynamic range as large as 15 bits.

Gamma-radiation effects in pure-silica-core photonic crystal fiber

We investigated the steady state gamma-ray radiation response of pure-silica-core photonic crystal fibers（PSC-PCFs）under an accumulated dose of 500 Gy and a dose rate of 2.38 Gy/min. The radiation-induced attenuation（RIA） spectra in the near-infrared region from 800 nm to 1700 nm were obtained. We find that the RIA at 1550 nm is related with hydroxyl（OH^-） absorption defects in addition to the identified self-trapped hole（STH） defects. Moreover, it is proposed and demonstrated that reduced OH^-absorption defects can decrease the RIA at 1550 nm. The RIA at 1550 nm has effectively declined from 27.7 d B/km to 3.0 dB/km through fabrication improvement. Preliminary explanations based on the unique fabrication processes were given to interpret the RIA characteristics of PSC-PCFs. The results show that the PSC-PCFs,which offer great advantages over conventional fibers, are promising and applicable to fiber sensors in harsh environments.

Photonic crystal fiber Mach-Zehnder interferometer with microholes ablated by a femtosecond laser for refractive index sensing

A new structure of the photonic crystal fiber（PCF）based Mach-Zednder interferometer（MZI）is fabricated and presented.The structure has microholes ablated by a femtosecond laser.The fringe visibility can be enhanced more than 10 dB compared with the interferometer without a microhole.The interferometer is characterized by sodium chloride solutions for refractive index（RI）sensing.The RI sensitivities are greatly increased by the hole fabrication since it directly changes the cladding modes of the PCF.For the interferometer sensor with two holes,the RI sensitivity is 157.74 nm/RIU,which is 5 times than that of the sensor without a microhole.Microholes ablation with a femtosecond laser on PCF can increase the sensor＇s sensitivity dramatically.Femtosecond laser has a wide application prospect in the field of performance improvement of the sensors.

Highly sensitive and stable probe refractometer based on configurable plasmonic resonance with nano-modified fiber core

A dispersion model is developed to provide a generic tool for configuring plasmonic resonance spectral characteristics.The customized design of the resonance curve aiming at specific detection requirements can be achieved.According to the model,a probe-type nano-modified fiber optic configurable plasmonic resonance(NMF-CPR)sensor with tip hot spot enhancement is demonstrated for the measurement of the refractive index in the range of 1.3332-1.3432 corresponding to the low-concentration biomarker solution.The new-type sensing structure avoids excessive broadening and redshift of the resonance dip,which provides more possibilities for the surface modification of other functional nanomaterials.The tip hot spots in nanogaps between the Au layer and Au nanostars(AuNSs),the tip electric field enhancement of AuNSs,and the high carrier mobility of the WSe_(2)layer synergistically and significantly enhance the sensitivity of the sensor.Ex-perimental results show that the sensitivity and the figure of merit of the tip hot spot enhanced fiber NMF-CPR sensor can achieve up to 2995.70 nm/RIU and 25.04 RIU^(−1),respectively,which are 1.68 times and 1.29 times higher than those of the conventional fiber plasmonic resonance sensor.The results achieve good agreements with numerical simulations,demonstrate a better level compared to similar reported studies,and verify the correctness of the dispersion model.The detection resolution of the sensor reaches up to 2.00×10^(−5)RIU,which is obviously higher than that of the conventional side-polished fiber plasmonic resonance sensor.This indicates a high detection accuracy of the sensor.The dense Au layer effectively prevents the intermediate nanomaterials from shedding and chemical degradation,which enables the sensor with high stability.Furthermore,the terminal reflective sensing structure can be used as a practical probe and can allow a more convenient operation.

Robust and low-cost interrogation technique for integrated photonic biochemical sensors based on Mach–Zehnder interferometers

We describe and experimentally demonstrate a measuring technique for Mach–Zehnder interferometer(MZI)based integrated photonic biochemical sensors. Our technique is based on the direct measurement of phase changes between the arms of the MZI, achieved by signal modulation on one of the arms of the interferometer together with pseudoheterodyne detection, and it allows us to avoid the use of costly equipment such as tunable light sources or spectrum analyzers. The obtained output signal is intrinsically independent of wavelength, power variations, and global thermal variations, making it extremely robust and adequate for use in real conditions. Using a silicon-on-insulator MZI, we demonstrate the real-time monitoring of refractive index variations and achieve a detection limit of 4.1 × 10^(-6)refractive index units(RIU).

Intermodal interference based refractive index sensor employing elliptical core photonic crystal fiber

A refractive index(RI)sensor based on elliptical core photonic crystal fiber(EC-PCF)has been proposed.The asymmetric elliptical core introduces the polarization-dependent characteristics of the fiber core modes.The performances of intermodal interference between the intrinsic polarization fiber core modes are investigated by contrast in two interferometers based on the Mach-Zehnder(M-Z)and Sagnac interference model.In addition,the RI sensing characteristics of the two interferometers are studied by successively filling the three layers air holes closest to the elliptical core in the cladding.The results show that the M-Z interference between LP_(01)and LP_(11)mode in the same polarized direction is featured with the incremental RI sensing sensitivity as the decreasing interference length,and the infilled scope around the elliptical core has a weak correlation with the RI sensing sensitivity.Due to the high birefringence of LP11 mode,the Sagnac interferometer has better RI sensing performance,the maximum RI sensing sensitivity of 12000 nm/RIU is achieved under the innermost one layer air holes infilled with RI matching liquid of RI=1.39 at the pre-setting EC-PCF length of 12 cm,which is two orders of magnitude higher than the M-Z interferometer with the same fiber length.The series of theoretical optimized analysis would provide guidance for the applications in the field of biochemical sensing.

Review of design principles of 2D photonic crystal microcavity biosensors in silicon and their applications

In this paper, we reviewed the design principles of two-dimensional （2D） silicon photonic crystal microcavity （PCM） biosensors coupled to photonie crystal waveguides （PCWs）. Microcavity radiation loss is con- trolled by engineered the cavity mode volume. Coupling loss into the waveguide is controlled by adjusting the position of the microcavity from the waveguide. We also investigated the dependence of analyte overlap integral （also called fill fraction） of the resonant mode as well as the effect of group index of the coupling waveguide at the resonant wavelength of the microcavity. In addition to the cavity properties, absorbance of the sensing medium or analyte together with the affinity constant of the probe and target biomarkers involved in the biochemical reaction also limits the minimum detection limits. We summarized our results in applications in cancer biomarker detection, heavy metal sensing and therapeutic drug monitoring.

Early Warning Smartphone Diagnostics for Water Security and Analysis Using Real-Time pH Mapping

Early detection of environmental disruption, unintentional or otherwise, is increasingly desired to ensure hazard minimization in many settings. Here, using a field-portable, smartphone fluorimeter to assess water quality based on the pH response of a designer probe, a map of pH of public tap water sites has been obtained. A custom designed Android application digitally processed and mapped the results utilizing the global positioning system （GPS） service of the smartphone. The map generated indicates no disruption in pH for all sites measured, and all the data are assessed to fall inside the upper limit of local government regulations, consistent with authority reported measurements. This implementation demonstrates a new security concept： network environmental forensics utilizing the potential of novel smartgrid analysis with wireless sensors for the detection of potential disruption to water quality at any point in the city. This concept is applicable across all smartgrid strategies within the next generation of the Internet of Things and can be extended on national and global scales to address a range of target analytes, both chemical and biological.

Linear Liquid Responses of Morpho Butterfly Structural Color： Experiment and Modeling

This paper investigates the selective liquid response for Morpho didius butterfly wing scales and propose an optical model to explain the effect of different components on the liquid response. It is found out that the reason of the selective response is that the liquid media forms nanometre-thick films between ridge-lamellae nanostructures and changes the constructive interference wavelength. There is linear relation between the structural color of ridge-lamellae structure and index of liquid background media. The reason of vapor＇s responses is that the nanometre-thick liquid fi lms on ridge-lamellae nanostructures change the constructive interference wavelength. These liquid films are formed due to vapor adsorption. Therefore,the selective linear liquid response can be applied to design nano-engineered photonic liquid and vapor sensors.