Fine-grained silt is widely distributed in the Huanghe River Delta(HRD)in China,and the sedimentary structure is complex,meaning that the clay content in the silt is variable.The piezocone penetration test(CPTu)is the...Fine-grained silt is widely distributed in the Huanghe River Delta(HRD)in China,and the sedimentary structure is complex,meaning that the clay content in the silt is variable.The piezocone penetration test(CPTu)is the most widely approved in situ test method.It can be used to invert soil properties and interpret soil behavior.To analyse the strength properties of surface sediments in the HRD,this paper evaluated the friction angle and its inversion formula through the CPTu penetration test and monotonic simple shear test and other soil unit experiments.The evaluation showed that the empirical formula proposed by Kulhawy and Mayne had better prediction and inversion effect.The HRD silts with clay contents of 9.2%,21.4%and 30.3%were selected as samples for the CPTu variable rate penetration test.The results show as follows.(1)The effects of the clay content on the tip resistance and the pore pressure of silt under different penetration rates were summarized.The tip resistance Q_t is strongly dependent on the clay content of the silt,the B_(q)value of the silt tends to 0 and is not significantly affected by the change of the CPTu penetration rate.(2)Five soil behavior type classification charts and three soil behavior type indexes based on CPTu data were evaluated.The results show that the soil behavior type classification chart based on soil behavior type index ISBT,the Robertson 2010 behavior type classification chart are more suitable for the silty soil in the HRD.展开更多
Piezocone penetration test(CPTu),the preferred in-situ tool for submarine investigation,is significant for soil classification and soil depth profile prediction,which can be used to predict soil types and states.Howev...Piezocone penetration test(CPTu),the preferred in-situ tool for submarine investigation,is significant for soil classification and soil depth profile prediction,which can be used to predict soil types and states.However,the accuracy of these methods needs to be validated for local conditions.To distinguish and evaluate the properties of the shallow surface sediments in Chengdao area of the Yellow River Delta,seabed CPTu tests were carried out at ten stations in this area.Nine soil classification methods based on CPTu data are applied for soil classification.The results of classification are compared with the in-situ sampling to determine whether the method can provide sufficient resolution.The methods presented by Robertson(based on soil behavior type index Ic),Olsen and Mitchell are the more consistent and compatible ones compared with other methods.Considering that silt soils have potential to liquefy under storm tide or other adverse conditions,this paper is able to screen soil classification methods suitable for the Chengdao area and help identify the areas where liquefaction or submarine landslide may occur through CPTu investigation.展开更多
In this work the possibility of identifying two important aspects in the process of adopting soil parameters for calculating stability analysis models in tailing dams is discussed. The use of commercial computer progr...In this work the possibility of identifying two important aspects in the process of adopting soil parameters for calculating stability analysis models in tailing dams is discussed. The use of commercial computer programs for stability calculations allows obtaining numerically exact results. Its representativeness, however, will be linked to the correct definition of the phreatic regime and to the prediction of volumetric soil behavior during shearing (contractile vs. dilating materials). The theoretical principles for the selection of soils parameters for different failure models are briefly presented. Also, how the incorrect assumptions regarding material behavior can significantly affect the estimation of tailing dams’ stability. The results of CPTu tests for the diagnosis of the phreatic and mechanical condition of the materials are discussed and two examples are presented to remark on the care that should be taken to avoid incorrect soils parameters adoption.展开更多
The current practice of geotechnical engineering commonly uses a combination of theoretical and empirical correlations to estimate the soil undrained shear strength in clays from the piezocone test. In order to comple...The current practice of geotechnical engineering commonly uses a combination of theoretical and empirical correlations to estimate the soil undrained shear strength in clays from the piezocone test. In order to complement the use of such correlations, the application of a method to estimate the soil undrained shear strength, using measures of the excess pore pressure in dissipation tests of piezocone is presented. In cohesive soils, excess pore pressure and undrained shear strength are dependent on the same variables (stress state, stress history, soil stiffness), which allows them to be related by the theoretical cavity expansion-critical state framework. This paper mentions the mathematical formulation that supports the theoretical framework used, its relationship with the Nkt and NΔu factors and their estimation in a case studied. The results obtained are consistent within the dispersion found in the international literature and encourage the use of the method in engineering practice.展开更多
基金The National Natural Science Foundation of China under contract No.U2006213。
文摘Fine-grained silt is widely distributed in the Huanghe River Delta(HRD)in China,and the sedimentary structure is complex,meaning that the clay content in the silt is variable.The piezocone penetration test(CPTu)is the most widely approved in situ test method.It can be used to invert soil properties and interpret soil behavior.To analyse the strength properties of surface sediments in the HRD,this paper evaluated the friction angle and its inversion formula through the CPTu penetration test and monotonic simple shear test and other soil unit experiments.The evaluation showed that the empirical formula proposed by Kulhawy and Mayne had better prediction and inversion effect.The HRD silts with clay contents of 9.2%,21.4%and 30.3%were selected as samples for the CPTu variable rate penetration test.The results show as follows.(1)The effects of the clay content on the tip resistance and the pore pressure of silt under different penetration rates were summarized.The tip resistance Q_t is strongly dependent on the clay content of the silt,the B_(q)value of the silt tends to 0 and is not significantly affected by the change of the CPTu penetration rate.(2)Five soil behavior type classification charts and three soil behavior type indexes based on CPTu data were evaluated.The results show that the soil behavior type classification chart based on soil behavior type index ISBT,the Robertson 2010 behavior type classification chart are more suitable for the silty soil in the HRD.
基金The National Natural Science Foundation of China under contract Nos U2006213 and 41672272the Fundamental Research Funds for the Central Universities under contract No.201962011。
文摘Piezocone penetration test(CPTu),the preferred in-situ tool for submarine investigation,is significant for soil classification and soil depth profile prediction,which can be used to predict soil types and states.However,the accuracy of these methods needs to be validated for local conditions.To distinguish and evaluate the properties of the shallow surface sediments in Chengdao area of the Yellow River Delta,seabed CPTu tests were carried out at ten stations in this area.Nine soil classification methods based on CPTu data are applied for soil classification.The results of classification are compared with the in-situ sampling to determine whether the method can provide sufficient resolution.The methods presented by Robertson(based on soil behavior type index Ic),Olsen and Mitchell are the more consistent and compatible ones compared with other methods.Considering that silt soils have potential to liquefy under storm tide or other adverse conditions,this paper is able to screen soil classification methods suitable for the Chengdao area and help identify the areas where liquefaction or submarine landslide may occur through CPTu investigation.
文摘In this work the possibility of identifying two important aspects in the process of adopting soil parameters for calculating stability analysis models in tailing dams is discussed. The use of commercial computer programs for stability calculations allows obtaining numerically exact results. Its representativeness, however, will be linked to the correct definition of the phreatic regime and to the prediction of volumetric soil behavior during shearing (contractile vs. dilating materials). The theoretical principles for the selection of soils parameters for different failure models are briefly presented. Also, how the incorrect assumptions regarding material behavior can significantly affect the estimation of tailing dams’ stability. The results of CPTu tests for the diagnosis of the phreatic and mechanical condition of the materials are discussed and two examples are presented to remark on the care that should be taken to avoid incorrect soils parameters adoption.
文摘The current practice of geotechnical engineering commonly uses a combination of theoretical and empirical correlations to estimate the soil undrained shear strength in clays from the piezocone test. In order to complement the use of such correlations, the application of a method to estimate the soil undrained shear strength, using measures of the excess pore pressure in dissipation tests of piezocone is presented. In cohesive soils, excess pore pressure and undrained shear strength are dependent on the same variables (stress state, stress history, soil stiffness), which allows them to be related by the theoretical cavity expansion-critical state framework. This paper mentions the mathematical formulation that supports the theoretical framework used, its relationship with the Nkt and NΔu factors and their estimation in a case studied. The results obtained are consistent within the dispersion found in the international literature and encourage the use of the method in engineering practice.
