Research of Lead-free Na_(0.5)Bi_(0.5)TiO_(3)-BaTiO_(3)System Piezoelectric Ceramics

To reduce the coercive field of Na_(0.5)Bi_(0.5)TiO_(3),Ba TiO_(3)were added as dopant materials.Then the(1-x)Na_(0.5)Bi_(0.5)TiO_(3)-xBaTiO_(3)ceramic samples were produced in solid synthetic way.The optimum preparation condition and piezoelectric properties of the samples were investigated.The XRD results show that the fabric transites from rhombohedral to tetragonal gradually with the substitution of the Ba^(2+).The morphotropic phase boundaries(MPB)exists in the composition range of 0.06.

Effects of Cr_2O_3 doping on the electrical properties and the temperature stabilities of PZT binary piezoelectric ceramics

The ceramics with Pb1.04Zr0.52Ti0.48O3 ＋ z wt.% Cr2O3 were prepared using the traditional technique. The effects of Cr2O3 doping on the phase structure, the microstructure, and the electrical properties of ceramics were investigated. Meanwhile, the temperature stabilities of the resonant frequency （fx） were studied. The results showed that the △fr/fr,25℃ decreased with the addition of 0.2 wt.% - 0.8 wt.% Cr2O3 as compared with the undoped samples. The minimum value （-0.182%） of △fr/fr,25℃ was obtained for z = 0.6 wt.% Cr2O3 samples that sintered at 1260℃. The values of ε^τ33/ε0 = 1650, tanδ = 0.006, d33 = 328 pC/N, Kp = 0.63, Qm = 2300 were obtained when Cr2O3 was 0.6 wt.%, which exhibited more excellent piezoelectric properties than other compositions such as those with z = 0.2 wt.%, 0.4 wt.%, and 0.8 wt.%, but had a similar value as compared with the tmdoped samples. When the Cr2O3 additive increased, the Curie temperature moved toward low temperature and the changes of resonant frequency changed from positive to negative with increasing temperature.

Effects of CeO_2 doping on the structure and properties of PSN-PZN-PMS-PZT piezoelectric ceramics

Quinary system piezoelectric ceramics PSN-PZN-PMS-PZT were prepared by using a two-step method. The effects of CeO2 doping on piezoelectric and dielectric properties of the system were investigated at morphotropic phase boundary （MPB）. The results reveal that the relative dielectric constant ε33^T｜ε0, the Curie temperature To, the piezoelectric constant d33, the mechanical quality factor Qm, and the electromechanical coupling coefficient Kp are changed with the increase of CeO2 content. On the other hand, the effects of CeO2 doping on the dielectric properties of PSN-PZN-PMS-PZT piezoelectric ceramics at high electric field are consistent with the change at weak electric field. The values of dielectric constant and dielectric loss are enhanced with the increasing of electric field.

Effects of Sr^(2+) substitution on the structural, dielectric, and piezoelectric properties of PZT-PMN ceramics

This study described the structural, dielectric, and piezoelectric behavior of Pb1-xSrx[（Zr0.52Ti0.48）0.95（Mn1/3Nb2/3）0.05]O3 ceramics （PSZT-PMN, x=0, 0.025, 0.050, and 0.075）, prepared by a semi-wet route. X-ray diffraction, dielectric, and piezoelectric investigations were carried out to analyze the crystal structure. The relative dielectric constant and dielectric loss were both calculated as the functions of temperature. The room-temperature dielectric constant reaches a maximum for a Sr2＋-modified PZT-PMN ceramic with an x value of 0.050, which corresponds to the morphotropic phase boundary （MPB）. Raman spectroscopy studies also confirm the existence of this MPB for x=0.050. The piezoelectric strain coefficients （d33） value shows a maximum response for this composition. In addition, the phase transition temperature decreases significantly when the Sr2＋concentration increases in the PZT-PMN ceramics.

Piezoelectric and dielectric properties of Cr-doped PSN-PZN-PZT qua-ternary piezoelectric ceramics

PSN-PZN-PZT + x wt. %Cr2O3, X = 0.0-0-9, were prepared by conventional mixed oxide techniques at sintering temperatures of 1220 degrees C-1300 degrees C for 2 h. The effect of sintering temperature on the microstructure and the piezoelectric properties was investigated by XRD, SEM, and other conventional measurement. The result indicated that with temperature increasing, the valence of Cr ion from Cr5+ or Cr6+ changes into C3+, and the piezoelectric properties turn hard. With increasing Cr2O3 content, the amount of rhombohedral phases increases and the morphotropic boundary phase is correspondingly shifts to rhombohedral phase. A uniform microstructure and excellent comprehensive properties were obtained at 1240 degrees C as the amount of Cr2O3 is 0.5 wt.%.

Dielectric, piezoelectric, and ferroelectric properties of lanthanum-modified PZTFN ceramics

Specimens of Pb1-1.5xLax（Zr0.53 Ti0.47）1-y-zFeyNb2O3 （x = 0, 0.004, 0.008, 0.012, and 0.016, y = z = 0.01） （PZTFN） ceramics were synthesized by a semi-wet route. In the present study, the effect of La doping was investigated on the structural, microstructural, dielectric, piezoelectric, and ferroelectric properties of the ceramics. The results show that, the tetragonal （space group P4mm） and rhombohedral （space group R3c） phases are observed to coexist in the sample at x = 0.012. Microstructural investigations of all the samples reveal that La doping inhibits grain growth. Doping of La into PZTFN improves the dielectric, ferroelectric, and piezoelectric properties of the ceramics. The hys- teresis loops of all specimens exhibit nonlinear behavior. The dielectric, piezoelectric and ferroelectric properties show a maximum response atx 〉 0.012, which corresponds to the morphotropic phase boundary （MPB）.

A New Capillary Electrophoresis Apparatus with Piezoelectric Ceramics High Voltage Source and Amperometric Detector

A new capillary electrophoresis apparatus was designed. Piezoelectric ceramics transformer technology was first applied in capillary electrophoresis, a high voltage and stable source was made. Amperometric detector was used in which the working electrode was closely opposite to the end of capillary. The apparatus was characterized in good reproducibility, safety and very low cost.

Dielectric and piezoelectric properties of(Li,Ce) modified NaBi_5Ti_5O_(18) composite ceramics

Nominal （Li0.5Ce0.5）x（Na0.5Bi0.5）（1-x）Na0.5Bi4.5Ti5O18 composite ceramics were fabricated using conventional solid-state reaction method. The coexistence of bismuth layer-structured phase and perovskite phase was determined in these ceramics using XRD technique. At room temperature, the x=0.11 sample showed the largest piezoelectric constant, d33, of about 26.5 pC/N and the largest electromechanical coupling factor, kt, of about 30%. Even after annealing at 500 ℃, the value of d33 was still about 19 pC/N, in x=0.08-0.11 samples. Moreover these composite ceramics showed low temperature coefficients of dielectric constant and high electrical resistivity in the temperature region of 450-550 ℃. These results indicated that （Li, Ce） modified NaBi5Ti5O18 composite ceramics were promising piezoelectric materials for high-temperature applications.

Influence of Sb_2O_3 doping on the properties of KBT-NBT-BT lead-free piezoelectric ceramics

0.144（K0.5Bi0.5）TiO3-0.85（Na0.5Bi0.5）TiO3-0.006BaTiO3（KBT-NBT-BT） lead-free piezoelectric ceramics were prepared using a conventional solid state method.The influence of Sb2O3 doping on the crystal phase,surface microstructure and properties of the KBT-NBT-BT lead-free piezoelectric ceramics were investigated using X-ray diffraction（XRD）,scanning electron microscope（SEM） and other analytical methods.The results show that all compositions are of pure perovskite structure solid states.Sb2O3 doping does not influence the microstructure of KBT-NBT-BT lead-free piezoelectric ceramics obviously in the Sb2O3 doping range of 0.1-0.5 wt.%.Sb2O3 functions as a donor when doped small amount,while functions as a acceptor when doped large amount.The piezoelectric strain constant（d33） increases first and then decreases;the dielectric constant（ε33^T/ε0） and the dielectric loss（tanδ） decrease continuously when the amount of Sb2O3 dopant increases.When the doping amount of Sb2O3 is 0.1 wt.%,the KBT-NBT-BT piezoelectric ceramics with good comprehensive properties are obtained,whose d33,ε33^T/ε0 and tanδ are 147 pC/N,1510 and 4.2%,respectively.

Effect of Sintering Time on Structure and Properties in CuO-doping KNN-LS-BF Piezoelectric Ceramics

The 0.6 mol% CuO-doping 0.996(0.95 Na_(0.5)K_(0.5)NbO_3-0.05 LiSbO_3)-0.004 FeBiO_3(KNN-LSBF-CuO) piezoelectric ceramics were synthesized by a solid-state reaction technique, and the structure and piezoelectric properties dependence of sintering time in KNN-LS-BF-CuO ceramics were studied. It is found that all the samples sintered for various time are perovskite structure mixed with orthorhombic symmetry phase and tetragonal phase, but the sintering time has significant influences on the crystalline and properties. When the sintering time increases from 2 hours to 6 hours, the grain of KNN-LS-BF-CuO ceramics becomes more homogeneous and more tight-arrangement. The experimental results reveal that the longer sintering time than 4 hours is beneficial for improving partial properties, such as d_(33), tgδ, and Q_m, but is adverse to ε_r and k_p, the KNNLS-BF-CuO ceramics with optimum properties can be synthesized for 6 hours at 1 060 ℃.

TRANSIENT RESPONSE OF A PIEZOELECTRIC CERAMIC WITH TWO COPLANAR CRACKS UNDER ELECTROMECHANICAL IMPACT

The transient response of two coplanar cracks in a piezoelectric ceramic under antiplane mechanical and inplane electric impacting loads is investigated in the present paper. Laplace and Fourier transforms are used to reduce the mixed boundary value problems to Cauchy-type singular integral equations in Laplace transform domain, which are solved numerically. The dynamic stress and electric displacement factors are obtained as the functions of time and geometry parameters. The present study shows that the presence of the dynamic electric field will impede or enhance the propagation of the crack in piezoelectric ceramics at different stages of the dynamic electromechanical load. Moreover, the electromechanical response is greatly affected by the ratio of the space of the cracks and the crack length.

ANALYSIS OF DAMAGE NEAR A CONDUCTING CRACK IN A PIEZOELECTRIC CERAMIC

The finite element formulation for analyzing static damage near a conducting crack in a thin piezoelectric plate is established from the virtual work principle of piezoelectricity.The damage fields under various mechanical and electrical loads are calculated carefully by using an effective iterative procedure.The numerical results show that all the damage fields around a crack tip are fan-shaped and the electric field applied has great influence on the mechanical damage, which is related to the piezoelectric properties.

ANALYSIS OF ELECTRIC BOUNDARY CONDITION EFFECTS ON CRACK PROPAGATION IN PIEZOELECTRIC CERAMICS

There are three types of cracks: impermeable crack, permeable crack and conducting crack, with different electric boundary conditions on faces of cracks in piezoelectric ceramics, which poses difficulties in the analysis of piezoelectric fracture problems. In this paper, in contrast to our previous FEM formulation, the numerical analysis is based on the use of exact electric boundary conditions at the crack faces, thus the common assumption of electric impermeability in the FEM analysis is avoided. The crack behavior and elasto-electric fields near a crack tip in a PZT-5 piezoelectric ceramic under mechanical, electrical and coupled mechanical- electrical loads with different electric boundary conditions on crack faces are investigated. It is found that the dielectric medium between the crack faces will reduce the singularity of stress and electric displacement. Furthermore, when the permittivity of the dielectric medium in the crack gap is of the same order as that of the piezoelectric ceramic, the crack becomes a conducting crack, the applied electric field has no effect on the crack propagation.

COMBINED DAMAGE FRACTURE CRITERIA FOR PIEZOELECTRIC CERAMICS

Mechanical and electrical damages are introduced to study the fracture mechanics of piezoelectric ceramics in this paper. Two kinds of piezoelectric fracture criteria are established using the method of least squares combined with a damage analysis of the well-known piezoelectric fracture experiments of Park and Sun’s. One is based on a linear combination of the mechanical and electrical damages and the other on their nonlinear combination. When the combined damage D is up to its critical value Dc, piezoelectric fracture occurs. It is found from the qualitative comparison of the numerical results with the experimental data that the nonlinearly combined damage fracture criterion can give a better prediction of piezoelectric fracture. And it is concluded from the nonlinearly combined damage fracture criterion that a negative electric feld impedes fracture whereas the efect of a positive electric feld on fracture depends on its magnitude.

Manufacture and Cytotoxicity of a Lead-free Piezoelectric Ceramic as a Bone Substitute—Consolidation of Porous Lithium Sodium Potassium Niobate by Cold Isostatic Pressing

Aim The piezoelectric properties and cytotoxicity of a porous lead-free piezoelectric ceramic for use as a direct bone substitute were investigated. Methodology Cold isostatic pressing （CIP） was applied to fabricate porous lithium sodium potassium niobate （Li0.06Na0.5K0.44） NbO3 specimens using a pore-forming method. The morphologies of the CIP-processed specimens were characterized and compared to those of specimens made by from conventional pressing procedures. The effects of the ceramic on the attachment and proliferation of osteoblasts isolated from the cranium of 1-day-old Sprague- Dawley rats were examined by a scanning electron microscopy （SEM） and metbylthiazol tetrazolium （MTT） assay. Results The results showed that CIP enhanced piezoelectricity and biological performance of the niobate specimen, and also promoted an extracellular matrix-like topography of it. In vitro studies showed that the CIP-enhanced material had positive effects on the attachment and proliferation of osteoblasts. Conclusion Niobate ceramic generated by CIP shows a promise for being a piezoelectric composite bone substitute.

Effect of Li content on the microstructure and properties of lead-free piezoelectric(K_(0.5)Na_(0.5))_(1-x)Li_xNbO_3 ceramics prepared by SPS

Lead-free piezoelectric （K0.5sNa0.5）1-xLixNbO3 （x = 0at%-20at%） ceramics were synthesized by spark plasma sintering （SPS） at low temperature and the effects of LiNbO3 addition on its crystal structure and properties were also studied. When the Li content was less than 6at%, a single proveskite phase with the similar structure of （K0.5Na0.5）NbO3 was formed; and a secondary phase with K3Li2Nb5O15 structure was observed in the 6at% 〈 x 〈 20at% compositional range. Furthermore, LiNbO3 existed as the third phase when the Li content was higher than 8at%. The grain sizes increased from 200-500 nm to 5-8 μm when the K3Li2Nb5O15 and LiNbO3 like phases were formed. With increasing Li content, the relative density of the ceramics first decreased from 97% to 93% and then kept constant. The piezoelectric coefficient d33, dielectric constant, and planner electromechanical coupling factor exhibited a decreasing tendency with increasing Li content because of the decrease in density and the formation of the secondary phase such as K3Li2Nb5O15 and LiNbO3. The formation of dense microstructure with a single phase is necessary in improving the properties of the （K0.5Na0.5）1-xLixNbO3 ceramics.

Preparation and Piezoelectric Properties of CuO-added(Ag_(0.75)Li_(0.1)Na_(0.1)K_(0.05_)NbO_3 Lead-free Ceramics

CuO-doped（Ag0.75Li0.1Na0.1K0.05）NbO3（ALNKN-xCuO, x = 0.2mol%） lead-free piezoelectric ceramics were prepared by the solid-state reaction method in air atmosphere. The effects of CuO addition on the phase structure, microstructure, and piezoelectric properties of the ceramics were investigated. The experimental results show that the ALNKN ceramics without doping CuO possess rhombohedral phase along with K2NbrO16- type phase and metallic silver phase. For all of the CuO-doped ALNKN ceramics, a pure perovskite structure with the orthorhombic phase was obtained by enclosing the samples in a corundum tube. A homogeneous microstructure with＇the grain size of about 1 ~tm was formed for the ceramics with 0.5mo1% CuO. The grain size increases with increasing amount of CuO. The temperature dependence of dielectric properties indicates that the ferroelectric phase of the ALNKN-xCuO ceramics becomes less stable with the addition of CuO. The ceramics with x = lm01% exhibit relatively good electrical properties along with a high Curie temperature. These results will provide a helpful guidance to preparing other AN-based ceramics by solid-state reaction method in air atmosphere.

Phase Structure, Microstructure and Electrical Properties of K_xNa_((1-x))NbO_3 Piezoelectric Ceramics with Different K/Na Ratio

The K_xNa_((1-x))NbO_3(x=0.45, 0.46, 0.47, 0.48, 0.49, 0.50) lead-free piezoelectric ceramics was fabricated by conventional solid-state sintering method. It was found that the ratio of alkaline metal would affect the microstructure, bulk density, and optimum sintering temperatures of ceramics. Meanwhile, the electrical properties were also influenced by modulating the K/Na ratio, exhibiting corresponding composition-dependent properties. The optimum electrical properties of K_xNa_((1-x))NbO_3 such as piezoelectric constant d_(33) = 115 pC/N, mechanical quality factor Q_m = 20, Curie temperature Tc = 365 ~oC, ε_(33)~T/ε_0= 588.1, dielectric loss tan δ = 0.024, bulk density(ρ) = 3.08 g/cm^3, remnant polarization(P_r) = 8.87 μC/cm^2 and coercive field(Ec) = 13.79 kV/cm were obtained at x = 0.46.

Microstructure and electrical properties of Ti-modified (Na_(0.5)K_(0.5))(Ti_xNb_(1-x))O_3 lead-free piezoelectric ceramics

Ti-Modified (Na0.5K0.5)(TixNb1-x)O3 (NKNT) piezoelectric ceramics were fabricated by double-layer buried powder process at 1020°C for 2 h. The microstructures,and piezoelectric and dielectric properties of the lead-free NKNT ceramics were investigated. X-ray diffraction re-sults indicated that Ti4+ had diffused into the (Na0.5K0.5)NbO3 lattices to form a solid solution with a perovskite structure. The introducing of Ti into the (Na0.5K0.5)NbO3 solid solution effectively reduced the sintering temperature and...