Simple Raman scattering sensor integrated with a metallic planar optical waveguide: effective modulation via minor structural adjustment

We report experimental realization of Raman spectra enhancement of copper phthalocyanine, using an on-chip metallic planar waveguide of the sub-millimeter scale. The oscillating ultrahigh order modes excited by the direct coupling method yield high optical intensity at resonance, which is different from the conventional strategy to create localized ＂hot spots.＂ The observed excitation efficiency of the Raman signal is significantly enhanced,owing to the high Q factor of the resonant cavity. Furthermore, effective modulation of the Raman intensity is available by adjusting the polymethyl methacrylate（PMMA） thickness in the guiding layer, i.e., by tuning the light–matter interaction length. A large modulation depth is verified through the fact that 10 times variation in the enhancement factor is observed in the experiment as the PMMA thickness varies from 7 to 23 μm.

Asymptotic Theory of Guided Modes for Cladded Slab Waveguides

Multilayer cladded slab waveguides have been solved by using asymptotic theory once or twice. Based on the solution of a three layer slab waveguide, the wave number of guided modes has been expanded in series of one or two small parameters. One side cladded slab, two side cladded slab and two parallel cladded slab waveguide system are demonstrated to show how to use this essentially analytic method. Numerical examples have also been given and compared with exact solutions, eved the first or second order solutions are highly accurate.

Structures of 3-layer planar waveguide where core field can become uniform

Theoretical analysis and numerical results for typical examples are presented for three-layer planar waveguides with nonlinear claddings to find the appropriate structures in which the core electric field can become uniform at appropriate optical power while the cladding fields decay exponentially . It is shown that there are five kinds of such structures. The electric field profiles are plotted for the five typical examples. We notify that the occurrence of uniform field in a waveguide core may perhaps have prospective applications in waveguide, opto-electronic and photonic devices.

Design of the low-loss waveguide coil for interferometric integrated optic gyroscopes

With the development of manufacturing technology,the propagation loss of the planar waveguide is getting lower and lower,and the shot-noise-limited sensitivity of an HOG will be greatly improved.When the propagation loss is getting lower,improper coupling-out waveguide in the waveguide coil may lead to non-ignorable bending loss and crosstalk because of the small radius of curvature and X-junction.In this paper,different couplingout waveguides have been designed.After calculation and optimization by the beam propagation method,we found the proper coupling-out waveguide having relatively low propagation loss,which can improve the sensitivity of the HOG.