In Haigh Westergaard stress space linear combination of twin shear stress and Tresca yield functions is called the mean yield （MY） criterion. The mathematical relationship of the criterion and its plastic work rate ...In Haigh Westergaard stress space linear combination of twin shear stress and Tresca yield functions is called the mean yield （MY） criterion. The mathematical relationship of the criterion and its plastic work rate done per unit volume were derived. A generalized worked example of slab forging was analyzed by the criterion and its corresponding plastic work rate done per unit volume. Then, the precision of the solution was compared with those by Mises and Twin shear stress yield criterions, respectively. It turned out that the calculated results by MY criterion were in good agreement with those by Mises criterion.展开更多
A unified linear expression of plastic work rate per unit volume is deduced from the unified linear yield criterion and the associated flow rule. The expression is suitable for various linear yield loci in the error t...A unified linear expression of plastic work rate per unit volume is deduced from the unified linear yield criterion and the associated flow rule. The expression is suitable for various linear yield loci in the error triangle between Tresca’s and twin shear stress yield loci on the π-plane. It exhibits generalization in which the different value of criterion parameter b corresponds to a specific linear formula of plastic work rate per unit volume. Finally, with the unified linear expression of plastic work rate and upper-bound parallel velocity field the strip forging without bulge is successfully analyzed and an analytical result is also obtained. The comparison with traditional solutions shows that when b=1/(1+ 3 ) the result is the same as the upper bound result by Mises’ yield criterion, and it also is identical to that by slab method with m=1, σ0=0.展开更多
In order to overcome the nonlinearity of Mises criterion, a new linear yield criterion with a dodecagon shape of the same perimeter as Mises criterion was derived by means of geometrical analysis. Its specific plastic...In order to overcome the nonlinearity of Mises criterion, a new linear yield criterion with a dodecagon shape of the same perimeter as Mises criterion was derived by means of geometrical analysis. Its specific plastic work rate expressed as a linear function of the yield stress, the maximum and minimum strains was also deduced and compared with that of Mises criterion. The physical meaning of the proposed yield criterion is that yielding of materials begins when the shear yield stress τs reaches the magnitude of 0.594σs. By introducing the Lode parameter, validation of evolution expressions of the proposed yield criterion with those based on Tresca, Mises and TSS criteria as well as available classical yield experimental results of various metals shows that the present results intersect with Mises results and coincide well with experimental data. Moreover, further application to the limit analysis of circle plate as an example is performed to demonstrate the effectiveness of the proposed yield criterion, and the subsequent comparison of limit loads with the Tresca analytical solutions and Mises numerical results shows that the present results are higher than the Tresca analytical results, and are in good agreement with the Mises numerical results.展开更多
In order to characterize the plastic state of a deformed material, an indentation method to determine the plastic equation of state(PES) was developed. The work-hardening coefficient and the strain rate sensitivity co...In order to characterize the plastic state of a deformed material, an indentation method to determine the plastic equation of state(PES) was developed. The work-hardening coefficient and the strain rate sensitivity coefficient of the plastic mechanic equation of state were determined by two kinds of indentation tests respectively. Therefore, the PES of materials under deformation can be obtained, and the plastic state of materials can be determined.展开更多
An indentation method for determining the plastic mechanical equation of state (PES) was studied. The constant loading rate and constant loading rate/load indentation tests were carried out. The method for determinin...An indentation method for determining the plastic mechanical equation of state (PES) was studied. The constant loading rate and constant loading rate/load indentation tests were carried out. The method for determining the work-hardening coefficient and the strain rate sensitivity coefficient of PES were discussed in detail. 304 stainless steel hot-treated at 1100°C was used to verify the method. The work-hardening coefficient and strain rate sensitivity coefficient of 304 stainless steel were respectively determined as 0.30 and 0.015. These values are very close to those achieved by tensile tests. From the establishment of the PES of 304 stainless steel it is shown that the PES obtained by the indentation method is easier than that by the tensile test.展开更多
基金This research was supported by the National Natural Sci—ence Foundation of China(Grant No.50474015)
文摘In Haigh Westergaard stress space linear combination of twin shear stress and Tresca yield functions is called the mean yield （MY） criterion. The mathematical relationship of the criterion and its plastic work rate done per unit volume were derived. A generalized worked example of slab forging was analyzed by the criterion and its corresponding plastic work rate done per unit volume. Then, the precision of the solution was compared with those by Mises and Twin shear stress yield criterions, respectively. It turned out that the calculated results by MY criterion were in good agreement with those by Mises criterion.
基金Project(50474015) supported by the National Natural Science Foundation of ChinaProject(RAL–SD-2008-2) supported by RAL Self-determination Science Foundation
文摘A unified linear expression of plastic work rate per unit volume is deduced from the unified linear yield criterion and the associated flow rule. The expression is suitable for various linear yield loci in the error triangle between Tresca’s and twin shear stress yield loci on the π-plane. It exhibits generalization in which the different value of criterion parameter b corresponds to a specific linear formula of plastic work rate per unit volume. Finally, with the unified linear expression of plastic work rate and upper-bound parallel velocity field the strip forging without bulge is successfully analyzed and an analytical result is also obtained. The comparison with traditional solutions shows that when b=1/(1+ 3 ) the result is the same as the upper bound result by Mises’ yield criterion, and it also is identical to that by slab method with m=1, σ0=0.
基金Project(51074052)supported by the National Natural Science Foundation of ChinaProject(BK20140334)supported by the Basic Research Program of Jiangsu Province+2 种基金ChinaProject(14KJB460024)supported by the Natural Science Foundation of Jiangsu Higher Education Institutions of ChinaProject(2014M561707)supported by China Postdoctoral Science Foundation
文摘In order to overcome the nonlinearity of Mises criterion, a new linear yield criterion with a dodecagon shape of the same perimeter as Mises criterion was derived by means of geometrical analysis. Its specific plastic work rate expressed as a linear function of the yield stress, the maximum and minimum strains was also deduced and compared with that of Mises criterion. The physical meaning of the proposed yield criterion is that yielding of materials begins when the shear yield stress τs reaches the magnitude of 0.594σs. By introducing the Lode parameter, validation of evolution expressions of the proposed yield criterion with those based on Tresca, Mises and TSS criteria as well as available classical yield experimental results of various metals shows that the present results intersect with Mises results and coincide well with experimental data. Moreover, further application to the limit analysis of circle plate as an example is performed to demonstrate the effectiveness of the proposed yield criterion, and the subsequent comparison of limit loads with the Tresca analytical solutions and Mises numerical results shows that the present results are higher than the Tresca analytical results, and are in good agreement with the Mises numerical results.
文摘In order to characterize the plastic state of a deformed material, an indentation method to determine the plastic equation of state(PES) was developed. The work-hardening coefficient and the strain rate sensitivity coefficient of the plastic mechanic equation of state were determined by two kinds of indentation tests respectively. Therefore, the PES of materials under deformation can be obtained, and the plastic state of materials can be determined.
文摘An indentation method for determining the plastic mechanical equation of state (PES) was studied. The constant loading rate and constant loading rate/load indentation tests were carried out. The method for determining the work-hardening coefficient and the strain rate sensitivity coefficient of PES were discussed in detail. 304 stainless steel hot-treated at 1100°C was used to verify the method. The work-hardening coefficient and strain rate sensitivity coefficient of 304 stainless steel were respectively determined as 0.30 and 0.015. These values are very close to those achieved by tensile tests. From the establishment of the PES of 304 stainless steel it is shown that the PES obtained by the indentation method is easier than that by the tensile test.
