Room-temperature synthesis of full-component APbX_(3)perovskite nanocrystal inks for optoelectronic applications

Lead halide perovskite nanocrystals(PNCs)have received great research interests due to their excellent optoelectronic properties.However,high temperature,inert gas protection and insulating long-chain ligands are used during the conventional hot-injection synthesis of PNCs,which limits their practical applications.In this work,we first develop a simple and scalable polar-solvent-free method for the preparation of full-component APbX_(3)(A=Cs,methylammonium(MA),formamidinium(FA),X=Cl,Br,I)PNCs under ambient condition.Through an exothermic reaction between butylamine(BA)and propionic acid(PA)short ligands,the PbX_(2) precursors could be well dissolved without use of any polar solvent.Meanwhile,the relatively lower growth rate of PNCs in our room-temperature reaction enables us to modulate the synthetic procedure to enhance the scalability(40-fold)and achieve large-scale synthesis.The resultant short ligands passivated PNC inks are compatible with varying solution depositing technique like spray coating for large-area film.Finally,we showcase that adopting the as-prepared MAPbI_(3) PNC inks,a self-powered photodetector is fabricated and shows a high photoresponsivity.These results demonstrate that our ambient-condition synthetic approach can accelerate the preparation of tunable and ready-to-use PNCs towards commercial optoelectronic applications.

Si nanopillar arrays with nanocrystals produced by template-induced growth at room temperature

Well-aligned and closely-packed silicon nanopillar （SNP） arrays are fabricated by using a simple method with magnetron sputtering of Si on a porous anodic alumina （PAA） template at room temperature. The SNPs are formed by selective growth on the top of the PAA pore walls. The growth mechanism analysis indicates that the structure of the SNPs can be modulated by the pore spacing of the PAA and the sputtering process and is independent of the wall width of the PAA. Moreover, nanocrystals are identified by using transmission electron microscopy in the as-deposited SNP samples, which are related to the heat isolation structure of the SNPs. The Raman focus depth profile reveals a high crystallization ratio on the surface.

Self-assembly of perovskite nanocrystals:From driving forces to applications

Self-assembly of metal halide perovskite nanocrystals(NCs)into superlattices can exhibit unique collective properties,which have significant application values in the display,detector,and solar cell field.This review discusses the driving forces behind the self-assembly process of perovskite NCs,and the commonly used self-assembly methods and different self-assembly structures are detailed.Subsequently,we summarize the collective optoelectronic properties and application areas of perovskite superlattice structures.Finally,we conclude with an outlook on the potential issues and future challenges in developing perovskite NCs.

Efficient energy transfer from self-trapped excitons to Mn^(2+) dopants in CsCdCl_(3):Mn^(2+) perovskite nanocrystals

Mn^(2+)doping has been adopted as an efficient approach to regulating the luminescence properties of halide perovskite nano-crystals(NCs).However,it is still difficult to understand the interplay of Mn^(2+)luminescence and the matrix self-trapped exciton(STE)emission therein.In this study,Mn^(2+)-doped CsCdCl_(3) NCs are prepared by hot injection,in which CsCdCl_(3) is selected because of its unique crystal structure suitable for STE emission.The blue emission at 441 nm of undoped CsCdCl_(3) NCs originates from the defect states in the NCs.Mn^(2+)doping promotes lattice distortion of CsCdCl_(3) and generates bright orange-red light emission at 656 nm.The en-ergy transfer from the STEs of CsCdCl_(3) to the excited levels of the Mn^(2+)ion is confirmed to be a significant factor in achieving efficient luminescence in CsCdCl_(3):Mn^(2+)NCs.This work highlights the crucial role of energy transfer from STEs to Mn^(2+)dopants in Mn^(2+)-doped halide NCs and lays the groundwork for modifying the luminescence of other metal halide perovskite NCs.

Formation of nanocrystalline microstructure in arc ion plated CrN films

Applying negative bias voltages caused significant microstructure changes in arc ion plated CrN films. Nanocrystalline microstructures were obtained by adjusting the negative bias voltage. Structural characterizations of the films were carried out using X-ray diffractometry (XRD) and high-resolution transmission electron microscopy (HR-TEM). The results indicated that increasing ion bombardment by applying negative bias voltages resulted in the formation of defects in the CrN films, inducing microstructure evolution from micro-columnar to nanocrystalline. The microhardness and residual stresses of the films were also affected. Based on the experimental results, the evolution mechanisms of the film microstructure and properties were discussed by considering ion bombardment effects.

Strengthening-softening transition and maximum strength in Schwarz nanocrystals

Recently,a Schwarz crystal structure with curved grain boundaries(GBs)constrained by twin-boundary(TB)networks was discovered in nanocrystalline Cu through experiments and atomistic simulations.Nanocrystalline Cu with nanosized Schwarz crystals exhibited high strength and excellent thermal stability.However,the grainsize effect and associated deformation mechanisms of Schwarz nanocrystals remain unknown.Here,we performed large-scale atomistic simulations to investigate the deformation behaviors and grain-size effect of nanocrystalline Cu with Schwarz crystals.Our simulations showed that similar to regular nanocrystals,Schwarz nanocrystals exhibit a strengthening-softening transition with decreasing grain size.The critical grain size in Schwarz nanocrystals is smaller than that in regular nanocrystals,leading to a maximum strength higher than that of regular nanocrystals.Our simulations revealed that the softening in Schwarz nanocrystals mainly originates from TB migration(or detwinning)and annihilation of GBs,rather than GB-mediated processes(including GB migration,sliding and diffusion)dominating the softening in regular nanocrystals.Quantitative analyses of simulation data further showed that compared with those in regular nanocrystals,the GB-mediated processes in Schwarz nanocrystals are suppressed,which is related to the low volume fraction of amorphous-like GBs and constraints of TB networks.The smaller critical grain size arises from the suppression of GB-mediated processes.

Nonlinear Absorption and Low-threshold Two-photon Pumped Amplified Stimulated Emission from FAPbBr_(3) Nanocrystals

Formamidinium lead bromide(FAPbBr_(3))nanocrystals(NCs)have been considered to be a good optoelectronic material due to their pure green emission,excellent stability and superior carrier transport characteristics.However,two-photon pumped amplified spontaneous emission(ASE)and the corresponding nonlinear optical properties of FAPbBr_(3) NCs are scarcely revealed.Herein,we synthesized colloidal FAPbBr_(3) NCs with different sizes by changing the molar ratio of FABr/PbBr_(2) in the precursor solution,using ligand assisted precipitation(LARP)technology at room temperature.Photoluminescence(PL)and time resolved photoluminescence(TRPL)spectroscopy were measured to characterize their ASE properties.And their nonlinear optical properties were studied through the Zscan technique and the two-photon excited fluorescence method.The stimulated emission properties including oneand two-photon pumped ASE have been realized from FAPbBr_(3) NCs.With large two-photon absorption coefficient(0.27 cm/GW)and high non-linear absorption cross-section(7.52×10^(5) GM),ASE with threshold as low as 9.8μJ/cm^(2) and 487μJ/cm^(2) have been obtained from colloidal FAPbBr_(3) NCs using one-and two-photon excitations.These results indicate that as a new possible green-emitting frequency-upconversion material with low thresholds,FAPbBr_(3) NCs hold great potential in the development of high-performance two-photon pump lasers.

Energy-Transfer in CsPbBr_(3)Nanocrystals:Sensitization of Porphyrin Triplets

Sensitizing molecular triplets by colloidal nanocrystals via triplet energy transfer is important for applications such as upconversion or organic synthesis.Typically two step triplet energy transfer(TET)are included in these applications:firstly the triplet energy stored in nanocrystals are extracted into surface ligands,and then the ligands further transfer triplet energy into molecules in bulk solution.Here we report one-step TET application from CsPbBr_(3)perovskite nanocrystals(NCs)to surface-anchored metalloporphyrin derivative molecules(MP).Compared to conventional two-step TET,the one-step TET mechanism possess lower energy loss and higher TET efficiency which is more generally implementable.In this scheme,photoexcitation of CsPbBr_(3)NCs leads to the sensitization of MP ligands triplets which efficiently emit phosphorescence.The enhanced light absorption of MP ligands and down-shifted photon emission can be useful in devices such as luminescent solar concentrators.

Optimization of Cellulose Nanocrystal Isolation from Ayous Sawdust Using Response Surface Methodology

This study focuses on the extraction of cellulose nanocrystals (CNC), from microcrystalline cellulose (MCC), derived from Ayous sawdust. The process involves multiple steps and a large amount of chemical products. The objective of this research was to determine the effects of factors that impact the isolation process and to identify the optimal conditions for CNC isolation by using the response surface methodology. The factors that varied during the process were the quantity of MCC, the concentration of sulfuric acid, the hydrolysis time and temperature, and the ultrasonic treatment time. The response measured was the yield. The study found that with 5.80 g of microcrystalline cellulose, a sulfuric acid concentration of 63.50% (w/w), a hydrolysis time of 53 minutes, a hydrolysis temperature of 69˚C, and a sonication time of 19 minutes are the ideal conditions for isolation. The experimental yield achieved was (37.84 ± 0.99) %. The main factors influencing the process were the sulfuric acid concentration, hydrolysis time and temperature, with a significant influence (p < 0.05). Infrared characterization results showed that nanocrystals were indeed isolated. With a crystallinity of 35.23 and 79.74, respectively, for Ayous wood fiber and nanocrystalline cellulose were observed by X-ray diffraction, with the formation of type II cellulose, thermodynamically more stable than native cellulose type I.

Isolative Synthesis and Characterization of Cellulose and Cellulose Nanocrystals from Typha angustifolia

The application potential of cellulosic materials in natural composites and other fields needs to be explored to develop innovative, sustainable, lightweight, functional biomass materials that are also environmentally friendly. This study investigated Typha angustifolia (Typha sp.) as a potential new raw material for extracting cellulose nanocrystals (CNCs) for application in wastewater treatment composites. Alkaline treatments and bleaching were used to remove cellulose from the stem fibres. The CNCs were then isolated from the recovered cellulose using acid hydrolysis. The study showed a few distinct functional groups (O-H, -C-H, =C-H and C-O, and C-O-C) in the Fourier Transform Infrared (FTIR) spectra. A scanning electron microscope (SEM) revealed the smooth surface of CPC and CNCs, which resulted from removing lignin and hemicellulose from powdered Typha angustifolia. Based on the crystalline index, the powdered Typha angustifolia, CPC, and CNCs were 42.86%, 66.94% and 77.41%. The loss of the amorphous section of the Typha sp. fibre resulted in a decrease in particle size. It may be inferred from the features of a Typha sp. CNC that CNCs may be employed as reinforcement in composites for wastewater treatment.

Synthesis and electrochemical properties of highly dispersed Li_(4)Ti_(5)O_(12)nanocrystalline for lithium secondary batteries

A sol-gel method using lauric acid as surfactant was used to synthesize Li4Ti5O12 nanocrystals with an ultra-fine particle size distribution between 120 and 250 nm.In order to obtain the electrode materials with the best electrochemical performance,the content of lauric acid during Li4Ti5O12 synthesis was systematically studied.The physical and electrochemical properties of the synthesized samples were characterized by X-ray diffraction（XRD）,field emission scanning electron microscopy（FESEM）,transmission electron microscopy（TEM）,laser particle size analysis,alternating current impedance（AC） and galvanostatic charge-discharge experiments.The highly dispersed Li4Ti5O12 nanocrystals obtained at 800 ℃ for 10 h can deliver a specific capacity of 163.3 mA-h/g at 1C rate without obvious capacity fade up to 50 cycles.The results suggest that well dispersed Li4Ti5O12 nanocrystals shorten the Li-ion diffusion length and enhance the electrochemical kinetics of the samples,which are very crucial to high rate capability.

Synthesis and upconversion luminescence of Lu_2O_3:Yb^(3+),Tm^(3+) nanocrystals

Lutetium oxide nanocrystals codoped with Tm3＋ and Yb3＋ were synthesized by the reverse-like co-precipitation method, using ammonium hydrogen carbonate as precipitant. Effects of the Tm3＋, Yb3＋ molar fractions and calcination temperature on the structural and upconversion luminescent properties of the Lu2O3 nanocrystals were investigated. The XRD results show that all the prepared nanocrystals can be readily indexed to pure cubic phase of Lu2O3 and indicate good crystallinity. The experimental results show that concentration quenching occurs when the mole fraction of Tm3＋ is above 0.2%. The optimal Tm3＋ and Yb3＋ doped molar fractions are 0.2% and 2%, respectively. The strong blue （490 nm） and the weak red （653 nm） emissions from the prepared nanocrystals were observed under 980 nm laser excitation, and attributed to the 1G4→3H6 and IG4→3F4 transitions of Tm3＋, respectively. Power-dependent study reveals that the 1G4 levels of Tm3＋ can be populated by three-step energy transfer process. The upconversion emission intensities of 490 nm and 653 nm increase gradually with the increase of calcination temperature. The enhancement of the upconversion luminescence is suggested to be the consequence of reducing number of OH- groups and the enlarged nanoerystal size.

Facile synthesis of tin oxide nanocrystals and their photocatalytic activity

Tin oxide nanociystals with diameters smaller than 10 nm were synthesized using Na2SnO3 and CO2 as reactants and cetyltrimethylammonium bromide（CTAB） as stabilizer under mild conditions.As a mild acidic gas,CO2 is favorable for the accurate adjustment of pH value of Na2SnO3 solution.Stannate salt is stable,cheap and easy in operation.The effects of Na2SnO3concentration,CTAB concentration,aging temperature,and aging time on the nanociystals were studied.It was found that,with the increasing Na2SnO3 concentration,aging temperature and aging time,SnO2 nanociystals size decreases.The formation of SnO2nanociystals can be interpreted by electrostatic-interaction mechanism.SnO2 nanociystals show high photocatalytic activities in the degradation of Rhodamine B solution.The catalytic activity of small nanocrystals is higher than that of large ones.

无界域上具有记忆的非自治Plate方程随机吸引子的存在性

研究无界域上一类具有衰退记忆和加性噪声的非自治Plate方程解的长时间行为.利用一致估计验证了解的拉回渐近紧性,获得了其随机吸引子的存在性.

Nanocrystals precipitation and up-conversion luminescence in Yb^(3+)-Tm^(3+) co-doped oxyfluoride glasses

Rare earth ions doped oxyfluoride glass with composition of 28SiO2·22AlO1.5·40PbF2·10PbO·（4.8-x） GdFy0.1NdF3.xYbF3·0.1TmF3 （x=-0, 0.1, 0.2, 0.5, 1, 2, 3, 4 and 4.8） in molar ratio was developed. When the oxyfluoride glasses were heat-treated at the first crystallization temperature, the glasses gave transparent glass-ceramics in which rare earth containing fluorite-type nanocrystals of about 17.2 nm in diameter uniformly precipitated in the glass matrix. Compared with the glasses before heat treatment, the glass-ceramics exhibited very strong blue up-conversion luminescence under 800 nm light excitation. Rare earth containing nanocrystals were also space selectively precipitated upon laser irradiation in an oxyfluoride glass, the size of precipitated nanocrystals could be controlled by laser power and scan speed. The intensity of the blue up-conversion luminescence was strongly dependent on the precipitation of β-PbF2 nanocrystal and the YbF3 concentration. The reasons for the highly efficient Tm^3＋ up-conversion luminescence after laser irradiation were discussed.

Novel Strategy for Synthesis of High Quality CdTe Nanocrystals in Aqueous Solution

A novel aqueous route for the synthesis of high-quality CdTe nanocrystals（NCs） is presented in this article. With both glutathione（GSH） and cysteine[n（GSH）：n（cysteine）=1：3] as stabilizers, high-quality CdTe NCs with controllable photoluminescence（PL） wavelength from 500 to 630 nm can be prepared within 4 h. As-prepared CdTe NCs show higher photoluminescence quantum yields（PLQY） compared with CdTe NCs prepared via other aqueous methods. When the fluorescent emission peak appeared in orange-red window, the PLQY reaches 70% or above at room temperature without any post-preparative treatment.

Investigation of nanocrystalline structure in selected carbonaceous materials

The structural parameters of nine Indian coals were determined by X-ray diffraction （XRD） and Kaman spectroscopy. The study revealed that the coals contain crystalline carbon of turbostratic structure with amorphous carbon. The stacking height （Lc） and interlayer spacing （rico2） of the crystallite structure of the coals ranged from 1.986 to 2.373 nm and from 0.334 to 0.340 nm, respectively. The degree of graphitization was calculated to range from 42% to 99%, thereby confirming the ordering of the carbon layers with the increase in coal rank. An exponential correlation was observed among the aromaticity （fa）, the lateral size （La）, and the rank （I20/I26）, suggesting that the coal crystallites are nanocrystalline in nature. A very strong correlation was observed between the structural parameters （fa, d002, Lc, the H/C ratio, and I20/I26）, the volatile matter content, and the elemental carbon content, indicating the structures of coals are controlled by the degree of contact metamorphism. The Raman spectra exhibited two prominent bands： the graphitic band （G） and the fn＇st-order characteristic defect band （D）. The deconvolufion resulted in five peaks： G, D1, D2, D3, and D4. The intense D1 band, which appeared at -1350 cm^-1, corresponds to a lattice vibration mode with Alg symmetry. The D2 mode, which appeared at -1610 cm^-1, arises from the structural disorder as a shoulder on the G band.

Sol-gel preparation and characterization of Co_3O_4 nanocrystals

A new citrate acid-hydrazine sol-gel route for preparation of Co3O4 nanoparticles has been developed. Co3O4 nanoparticles with different particle-sizes and morphology were prepared at different heat-treatment temperatures and the pure cubic nanocrystals of Co3O4 were obtained at 600℃. The synthesis process was monitored by infrared spectroscopy (IR), thermal gravimetric and differential thermal analysis (TG-DTA). The structure and morphology of Co3O4 nanocrystals were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and X-ray-photoelectron spectroscopy (XPS). The infrared absorption bands blue-shifted with particle size decreasing, which could be attributed to increasing surface effect. XPS results showed that predominant species at surface layers of Co3O4 nanocrystals are octahedral Co (Ⅲ).

Recent Progress on Spectroscopy of Lanthanide Ions Incorporated in Semiconductor Nanocrystals

Doping luminescent lanthanide ions into semiconductor nanocrystals is an ideal approach for developing nanodevices for various applications. Quantum confinement effects are expected for lanthanide ions doped in small semiconductor nanocrystals. The most recent progress on the synthesis and spectroscopy of lanthanide ions in various semiconductor nanocrystals such as Ⅱ -Ⅵ, Ⅲ-Ⅴ and Ⅳ-Ⅵ families were systematically reviewed, focusing on our recent findings on the optical spectroscopy of Eu^3 ＋ doped in ZnO and TiO2 nanocrystals by wet chemical synthesis. The energy transfer from the band-gap excitation to lanthanides further confirmed that lanthanide ions could be successfully incorporated into the lattice sites in spite of the mismatch in ionic radii.

Upconversion Luminescence Properties of Ho^(3+),Tm^(3+),Yb^(3+) Co-Doped Nanocrystal NaYF_4 Synthesized by Hydrothermal Method

Nanocrystal of upconversion （UC） phosphor Ho^3＋, Tm^3＋ , and Yb^3＋ co-doped NaYF4 was prepared by the hydrothermal method in the presence of the complexing agent EDTA. Under 980 nm diode laser excitation, the impact of different concentrations of Ho^3＋ ion on the UC luminescence intensity was discussed. The law of luminescence intensity versus pump power shows that the 474 nm blue emission, 538 nm green emission, and 642 nm red emission are all due to the two-photon process, while the 450 nm blue emission is a three-photon process. The UC mechanism and processes were also analyzed. The sample was characterized by transmission electron microscopy （TEM） and X-ray diffraction （XRD）. The result shows that Ho^3＋ ,Tm^3＋ , and Yb^3＋ co-doped NaYF4 prepared by the hydrothermal method exhibits a hexagonal nanocrystal.