A comparative study for petroleum removal capacities of the bacterial consortia entrapped in sodium alginate,sodium alginate/poly(vinyl alcohol),and bushnell haas agar

The purpose of this study was to identify and compare the degradation efficiencies of free and entrapped bacterial consortia(Staphylococcus capitis CP053957.1 and Achromobacter marplatensis MT078618.1)to different polymers such as Sodium Alginate(SA),Sodium Alginate/Poly(Vinyl Alcohol)(SA/PVA),and Bushnell Haas Agar(BHA).In addition to SA and SA/PVA,which are cost-effective,non-toxic and have different functional groups,BHA,which is frequently encountered in laboratory-scale studies but has not been used as an entrapment material until now.Based on these,the polymers with different surface morphologies and chemical compositions were analyzed by SEM and FT-IR.While the petroleum removal efficiency was higher with the entrapped bacterial consortia than with the free one,BHA-entrapped bacterial consortium enhanced the petroleum removal more than SA and SA/PVA.Accordingly,the degradation rate of bacterial consortia entrapped with BHA was 2.039 day^(-1),SA/PVA was 1.560,SA was 0.993,the half-life period of BHA-entrapped bacterial consortia is quite low(t_(1/2)=0.339)compared with SA(t_(1/2)=0.444)and SA/PVA(t_(1/2)=0.697).The effects of the four main factors such as:amount of BHA(0.5,1,1.5,2,2.5,3 g),disc size(4,5,6,7,8 mm),inoculum concentration(1,2.5,5,7.5,10 mL),and incubation period on petroleum removal were also investigated.The maximum petroleum removal(94.5%)was obtained at≥2.5 mL of bacterial consortium entrapped in 2 g BHA with a 7 mm disc size at 168 h and the results were also confirmed by statistical analysis.Although a decrease was observed during the reuse of bacterial consortium entrapped in BHA,the petroleum removal was still above 50%at 10th cycle.Based on GC-MS analysis,the removal capacity of BHA-entrapped consortium was over 90%for short-chain n-alkanes and 80%for medium-chain n-alkanes.Overall,the obtained data are expected to provide a potential guideline in cleaning up the large-scale oil pollution in the future.Since there has been no similar study investigating petroleum removal with the bacterial consortia entrapped with BHA,this novel entrapment material can potentially be used in the treatment of petroleum pollution in advanced remediation studies.

Kinetic hydrate inhibitor performance of new copolymer poly(N-vinyl-2-pyrrolidone-co-2-vinyl pyridine)s with TBAB

In oil and gas field, the application of kinetic hydrate inhibitors （KHIs） independently has remained problematic in high subcooling and high water-cut situation. One feasible method to resolve this problem is the combined use of KHIs and some synergists, which would enhance KHIs’ inhibitory effect on both hydrate nucleation and hydrate crystal growth. In this study, a novel kind of KHI copolymer poly（N-vinyl-2-pyrrolidone-co-2-vinyl pyridine）s （HGs） is used in conjunction with TBAB to show its high performance on hydrate inhibition. The performance of HGs with different monomer ratios in structure II tetrahydrofuran （THF） hydrate is investigated using kinetic hydrate inhibitor evaluation apparatus by step-cooling method and isothermal cooling method. With the combined gas hydrate inhibitor at the concentration of 1.0 wt%, the induction time of 19 wt% THF solution could be prolonged to 8.5 h at a high subcooling of 6℃. Finally, the mechanism of HGs inhibiting the formation of gas hydrate is proposed.

Improving physical properties of poly(vinyl alcohol)/montmorillonite nanocomposite hydrogels via the Hofmeister effect

Hydrogel is a kind of three-dimensional crosslinked polymer material with high moisture content.However,due to the network defects of polymer gels,traditional hydrogels are usually brittle and fragile,which limits their practical applications.Herein,we present a Hofmeister effect-aided facile strategy to prepare high-performance poly(vinyl alcohol)/montmorillonite nanocomposite hydrogels.Layered montmorillonite nanosheets can not only serve as crosslinking agents to enhance the mechanical properties of the hydrogel but also promote the ion conduction.More importantly,based on the Hofmeister effect,the presence of(NH_(4))_(2)SO_(4)can endow nanocomposite hydrogels with excellent mechanical properties by affecting PVA chains'aggregation state and crystallinity.As a result,the as-prepared nanocomposite hydrogels possess unique physical properties,including robust mechanical and electrical properties.The as-prepared hydrogels can be further assembled into a high-performance flexible sensor,which can sensitively detect large-scale and small-scale human activities.The simple design concept of this work is believed to provide a new prospect for developing robust nanocomposite hydrogels and flexible devices in the future.

Graphene quantum dots doped poly(vinyl alcohol)hybrid membranes for desalination via pervaporation

Pervaporation desalination by highly hydrophilic materials such as poly(vinyl alcohol)(PVA)based separation membrane is a burgeoning technology of late years.However,the improvement of membrane flux in pervaporation desalination has been a difficult task.Here,a novel hybrid membrane with doped graphene oxide quantum dots(GOQDs)which is rich in hydrophilic groups and small size into the matrix of PVA was prepared to improve the membrane flux.The membranes structures were described by field emission scanning electron microscopy(FESEM),atomic force microscopy(AFM),Fourier transform infrared(FT-IR),differential scanning calorimetry(DSC),thermogravimetric analysis(TGA)and X-ray diffraction(XRD).And more,Water contact angle,swelling degree,and pervaporation properties were carried out to explore the effect of GOQDs in PVA matrix.In addition,GOQDs content in the hybrid membrane,NaCl concentration,and feed temperature were investigated accordingly.Moreover,the hydrogen bonds between PVA chains were weakened by the interaction between GOQDs and PVA chains.Significantly,the hybrid membrane with optimized doped GOQDs content,200 mg·L^(-1),displays a high membrane flux of 17.09 kg·m^(-2)·h^(-1)and the salt rejection is consistently greater than 99.6%.

Innovative approach to boosting the chemical stability of AZ31 magnesium alloy using polymer-modified hybrid metal oxides

Meeting the demands of complex and advanced applications requires the development of high-performance hybrid materials with unique properties.However,the integration of polymeric frameworks with MgO/WO_(3) composite layers faces challenges due to the lack of understanding of the formation mechanism and the challenge of determining the impact of self-assembled architecture on anticorrosive properties.In this study,we aimed to enhance the corrosion resistance of the MgO layer produced by plasma electrolysis(PE)of AZ31 Mg alloy by incorporating WO_(3) with partially phosphorated poly(vinyl alcohol)(PPVA).Two types of porous MgO layers were produced using the PE process with an alkaline-phosphate electrolyte,one with and one without WO_(3) nanoparticles,which were subsequently immersed in an aqueous solution of PPVA.Incorporating PPVA into the WO_(3)-MgO layer resulted in hybrids being deposited in a fragmented manner,creating a“laminar reef-like structure”that sealed most of the structural defects in the layer.The PPVA-sealed WO_(3)-based coating exhibited superior corrosion resistance compared to the other samples.Computational analyses were employed to explore the mechanism underlying the formation of PPVA/WO_(3) hybrids on the MgO layer.These findings suggest that PPVA-WO_(3)-MgO hybrid coatings can potentially improve corrosion resistance in various fields.

CONDUCTING BLENDS OF POLY (2-VINYL PYRIDINE) AND POLYETHYLENE OXIDE WITH HIGH MOLECULAR WEIGHT

Ionic, electronic and mixed (ionic-electronic) conductivities of blends of poly(2-vinyl pyridine) (P2VP) and poly(ethylene oxide) (PEO) with high molecular weight after doped with LiClO4, TCNQ or LiClO4 and TCNQ were investigated. Effects of LiClO4 and TCNQ concentrations on the conductivity of PEO/P2VP/LiClO4 or TCNQ blend were studied. The ionic conductivity of PEO/P2VP/LiClO4 blend increases with increasing PEO content. At a Li/ethylene bride molar ratio of 0.10 and a TCNQ/2-vinyl pyridine molar ratio of 0.5, the mixed conductivity of PEO/P2VP/LiClO4/TCNQ is higher than the total of ionic conductivity of PEO/P2VP/LiClO4 and electronic conductivity of PEO/P2VP/TCNQ when the weight ratio of PEO and P2VP is 6/4 or 5/5. Scanning electron microscopy (SEM) on the broken cross-section of the PEO/P2VP/LiClO4 blend and differential scanning calorimetry (DSC) results show that LiClO4 could act as a compatibilizer in the blend.

Self-aggregating behavior of poly(4-vinyl pyridine)and the potential in mitigating sand production based onπ-πstacking interaction

Unconsolidated sandstone reservoirs are most susceptible to sand production that leads to a dramatic oil production decline.In this study,the poly(4-vinyl pyridine)(P_(4)VP)incorporated with self-aggregating behavior was proposed for sand migration control.The P_(4)VP could aggregate sand grains spontaneously throughπ-πstacking interactions to withstand the drag forces sufficiently.The influential factors on the self-aggregating behavior of the P_(4)VP were evaluated by adhesion force test.The adsorption as well as desorption behavior of P_(4)VP on sand grains was characterized by scanning electron microscopy and adhesion force test at different pH conditions.The result indicated that the pH altered the forms of surface silanol groups on sand grains,which in turn affected the adsorption process of P_(4)VP.The spontaneous dimerization of P_(4)VP molecules resulting from theπ-πstacking interaction was demonstrated by reduced density gradient analysis,which contributed to the self-aggregating behavior and the thermally reversible characteristic of the P_(4)VP.Dynamic sand stabilization test revealed that the P_(4)VP showed wide pH and temperature ranges of application.The production of sands can be mitigated effectively at 20-130℃ within the pH range of 4-8.

The Amperometric Glucose Enzyme Electrode by Immobilized Glucose Oxidase in Glucose Oxidase/N-ethyl-Poly (4-vinyl)pyridine Multilayer

Multilayers of glucose oxidase(GOD)/N-ethyl-poly (4-vinyl) pyridine (EPVP) have been assembled on thiol self-assembled monolayers on gold electrode.This electrode can be used as an amperometric enzyme elcctrode for glucose. Fe (CN)63-/4- incorporated in EPVP layer acts as the electron mediator, the linear range was 0.1 to 6 mmol/L when the number of GOD layers was 5.

Living/controlled polymerization of vinylpyridines into sequence-regulated copolymers by Lewis pair

The poly(vinylpyridine)(PVP) based(co)polymers are of particular interest in materials science, due to their multifunctionality and diverse applications. So far, there is no report on the sequence-regulated copolymerization of vinylpyridines(VPs) and methacrylate monomer in one-step manner yet. Here we designed and synthesized a series of guanidine phosphines as Lewis base(LB), which is combined with bulky organoaluminium to construct Lewis pairs(LPs) for polymerization of VPs. The living/controlled polymerization of 4-vinylpyridine(4-VP) or 2-vinylpyridine(2-VP) can be accomplished with remarkable efficiency by such Lewis pair polymerization(LPP), furnishing polymers with high molecular weight(up to 288 kg/mol) and narrow molecular weight distribution(as low as 1.17). Mechanistic studies reveal the interaction of LPs and formation of zwitterionic intermediates, providing solid evidences to support the proposed polymerization mechanism. More importantly, by simply adjusting the LA dosage, this LPP strategy realizes the unprecedented control over the sequence regulation of 2-VP-based copolymers from gradient to block in one-step manner, regardless of the monomer ratio, which greatly expands the versatility of the LPP.

Rare Earth Stearates as Thermal Stabilizers for Rigid Poly(vinyl chloride)

A series of stearates with different rare-earth ion were investigated as thermal stabilizers for rigid PVC at 180 ℃ in air. Their stabilizing efficiency was based on measuring the rate of dehydrochlorination. The resulted revealed the higher stabilizing efficiency of the investigated rare-earth stearates as thermal stabilizers for rigid PVC compared with the thermal stabilizers for industry: calcium stearate, zinc stearate, butyl stannum mercaptide, phosphite esters, β-diketone and epoxidized sunflower oil. This was well illustrated by longer incubation period (T_S) values and lower rate of dehydrochlorination. The stable efficiency was affected by the nature of rare-earth element's individual electronic shell. The mechanism for the stabilizing effect of rare-earth stearates was proposed. The result was experimentally proved based on IR spectrum.

Controlled delivery of ibuprofen from poly(vinyl alcohol)-poly(ethylene glycol) interpenetrating polymeric network hydrogels

Hydrogels composed of poly(vinyl alcohol)(PVA) and poly(ethylene glycol)(PEG) were synthesized using glutaraldehyde as crosslinker and investigated for controlled delivery of the common anti-inflammatory drug, ibuprofen(IBF). To regulate the drug delivery, solid inclusion complexes(ICs) of IBF in β–cyclodextrin(β–CD) were prepared and added to the hydrogels. The ICs were prepared by the microwave irradiation method, which is more environmentally benign. The formation of IC was confirmed by various analytical techniques and the synthesized hydrogels were also characterized. Controlled release of drug was achieved from the hydrogels containing the ICs in comparison to the rapid release from hydrogels containing free IBF.The preliminary kinetic analysis emphasized the crucial role of β–CD in the drug release process that influences the polymer relaxation, thereby leading to prolonged release. The cytotoxicity assay validated the hydrogels as non-toxic in nature and hence can be utilized for controlled delivery of IBF.

Creep Behaviour of Wood Flour/Poly(vinyl chloride) Composites

The experimental creep data were focused on wood-flour （WF）/poly vinyl chloride （PVC） composites with the variations in additive concentrations of wood flour, silane coupling agent, organomodified montmorillonite （OMMT） and nano-cacium carbonate （nano-CaCO3）. Their effects were analyzed using the Four-element Burger Model incorporating microscopic mechanisms. Total creep strain was low with increasing WF while elastic strain was high and plastic flow strain was low in modeling. Modification of WF with silane was beneficial to creep resistance, so did adding low ratio of OMMT （1.5 wt%） and nano-CaCO3 in composites. Thus, it was effective in reducing creep either by stiffening the PVC matrix using rigid nano-particles or by improving their adhesion with resin. However, superfluous quantity of any additament did not benefit the improvement owing to either earlier destruction of their agglomerates or stress-concentrated cracks in the over-incrassated interface.

A Hybrid Membrane of Poly(vinyl alcohol) and Phosphotungstic Acid for Fuel Cells

Proton conducting membranes composed of phosphotungstic acid (PWA) and poly(vinyl alcohol) (PVA)were prepared. Conductivity and Fourier transform infrared spectrometer(FTIR) measurements show that most ofthe acid embedded are stable in the PVA matrix when the membrane is immerged in water or methanol solution atroom temperature. Conductivity of the composite membranes scatters around 10-3 S.cm-1 at room temperature.The methanol crossover through the membranes is about an order of magnitude lower than that through Nafion117 membrane.

Compatibility and Properties of Biodegradable Blend Films with Gelatin and Poly(vinyl alcohol)

The blend films with gelatin and poly（vinyl alcohol） （PVA） were prepared by a solution casting method. The compatibility between gelatin and PVA in the blend films was investigated. The transmittance, Fourier-transform infrared spectroscopy （FTIR）, x-ray diffraction （XRD）, thermogravimetry analysis （TG）, and differential scanning calorimetry （DSC） were employed to characterize the resultant blend films. According to optic result, the opacity of the blend film at the ratio of 20/80 （w/w, Gel to PVA） was the lowest, indicating the best compatibility between Gel and PVA at the ratio. The results oflR, XRD, DSC, and TG revealed an intensive interaction and good compatibility between them in the blend film at the ratio. The mechanical properties and solubility showed that PVA content in the blend films obviously affected the elongation at break and solubility. The mechanical properties and water resistance of gelatin film may be improved by the introduetion of PVA.

Antiplasticizing Effect of MOCA on Poly(vinyl chloride)

An obvious antiplasticizing effect has been observed in PVC with small amount of MOCA, 3,3’-dichloro-4,4’-diamino-diphenylmethane. PVC-MOCA interaction and crystallization behavior of PVC/MOCA blends were investigated in detail to explain the mechanism of antiplasticization on the basis of a series of techniques including DMA, FTIR, and DSC. The results of mechanical properties tests show that the tensile strength of PVC with 5 phr of MOCA reaches a maximum value, 69.5 Mpa, which is about 23 % higher than that of pure PVC. The rise in tensile strength was attributed to an antiplasticizing effect of MOCA on PVC as confirmed by DMA measurements. The evidences from FTIR reveal that a strong hydrogen-bonding interaction takes place between the nitrogen atom of –NH2 groups in MOCA and the methine proton of PVC repeat units. The results of DSC analysis indicate that crystallization behavior of MOCA is suppressed completely and the crystallinity of PVC decreases with the increase of MOCA amount.

Influence of Annealing and Additives on the Crystallization Behavior and Properties of Poly(vinyl chloride)

Acetanilide （AC）, adipic acid （AA） and potassium hydrogen phthalate （PHP） were chosen as additives to accelerate PVC crystallization and improve its mechanical properties. The influences of the additives and annealing on the crystallization behavior, micromorphology and the tensile properties were investigated by the thermal analysis, scanning electron microscopy （SEM） and the tensile test. Based on the analysis results, it was concluded that the melting peaks ranging from 110 to 200 ℃ and 200 to 240 ℃ were caused by the fusion of the fringed micelle crystals and chain-folded crystals respectively. AC advanced the fringed micelle crystal to develop, while AA and PHP promoted obviously the chain-folded crystal to grow. The addition of the foreign additives did not change the growth pattern ofPVC crystallites, the growth of the micelle crystal was favorable at 110 ℃, and the chain-folded crystal was developed at higher temperature. For PVC/ AA and PVC/PHP, when annealed at 110 ℃, a regular nest like network was formed, the crystallinity and the crystallite size were increased as well, and as a result, the tensile strength, Young＇s modulus and the elongation at break point were improved simultaneously and greatly.

Structures of LDHs Intercalated with Ammonia and the Thermal Stability for Poly(vinyl chloride)

MgAl-NH3 LDHs (layered double hydroxides), ZnAl-LDHs and ZnAl-NH3 LDHs with different molar ratio of Al/ammonia were synthesized by co-precipitation method. The synthetic LDHs samples were characterized by XRD, FT-IR, TGA-DTG and SEM techniques and tested by Congo red method. In addition, after PVC (Poly vinyl chloride) and DOP (Dioctylphthalate) were added to LDHs, the thermal stability for PVC was characterized by TGA-DTG. The results indicated that LDHs intercalated with ammonia improved thermal stability for PVC significantly, MgAl-NH3 LDHs (Mg2+:Al3+: NH3·H2O = 3:1:0.5) and ZnAl-NH3 LDHs (Zn2+:Al3+:NH3·H2O=2:1:1.5) showed the best thermal stability for PVC, interlayered space of LDHs became larger by intercalating ammonia.

Research on the Long Time Swelling Properties of Poly (vinyl alcohol)/Hydroxylapatite Composite Hydrogel

Poly(vinyl alcohol)/hydroxylapatite(PVA/HA)composite hydrogel was prepared by repeated freezing and thawing.The water loss properties of the resultant hydrogel were investigated by using optical microscope.Long time immersion tests of PVA/HA composite hydrogel were carried out in the diluted calf serum solution to study the change laws of swelling properties with the freezing-thawing cycles and HA content.The micro-morphologies of PVA/HA composite hydrogel after long time immersion were observed by means of the high-accuracy 3D profiler.The results show that the swelling process of PVA/HA composite hydrogel is the converse process of its water loss.Long time swelling ratio curves of PVA/HA composite hydrogel in the calf serum solution are manifested as four stages of quick increase,decrease,slow decrease and stable balance,and its equilibrium swelling ratio decreases with the increase of freezing-thawing cycles and HA content.It is revealed that the network structure of the composite hydrogel immersed for a long period is significantly improved with the increase of HA content. Perfect network structures of PVA/HA composite hydrogel as well as full and equilibrium tissues after swelling equilibrium are obtained when the HA content is 3% and the number of freezing-thawing cycles is 7.

Preparation and Swelling Behavior of Physically Crosslinked Hydrogels Composed of Poly(vinyl alcohol) and Chitosan

The physically crosslinked poly（vinyl alcohol）/chitosan （CS） composite hydrogels were prepared by cyclic freezing/thawing techniques, and the microstructure and swelling behavior of the hydrogels in the simulated gastric （pH 1.0） and intestinal （pH 7.4） media were investigated. The experimental results of infrared spectra （IR）, scanning electron microscope （SEM） and differential scanning calorimetry （DSC） demonstrated that poly（vinyl alcohol） and chitosan had good miscibility in the composite hydrogels, and the addition of chitosan perturbed the formation of poly（vinyl alcohol） crystallites. The swelling kinetics results indicated that the composite hydrogels had good pH sensitive properties to the acidic environments, and with the increase of chitosan content in the blend, the maximum swelling degreed and the swelling rate both increased, but it led to more dissolution at pH 1.0. And the composite hydrogels also exhibited good reversible swelling behavior with pH value of the swelling medium altering between 1.0 and 7.4. In addition, the higher freezing/thawing cycle times resulted in the lower swelling rate. Therefore, the swelling behavior of the composite hydrogels could be adjusted by changing the chitosan contents and the freezing/thawing cycle times.

UV enhanced gas–solid synthesis of chlorinated poly vinyl chloride characterized by a UV–Vis online analysis method

Dynamic characteristics of UV enhanced gas–solid PVC chlorination process were revealed by a UV–Vis spectral online analysis method. Experimental results showed an instantaneous increase of the chlorination rate as soon as UV light was affiliated, which demonstrated the intensified effect of UV radiation on PVC chlorination directly.Different affiliation methods of UV light were then studied, proving that continuous UV radiation could enhance the chlorination process significantly while intermittent UV radiation was able to initiate the chlorination reaction once it was conducted. Besides, experiments were carried out to study the influences of parameters on the chlorination process such as UV wavelength, chlorination temperature, partial pressure of chlorine gas and PVC raw materials. Among all the parameters, chlorination temperature and partial pressure of chlorine gas were testified as two key factors to determine the chlorination performance. Thermal analysis of CPVC products showed that their corresponding properties such as the glass transition temperature(Tg) and the homogeneity of chlorine distribution in polymer phase were improved with the increase of chlorine content.