Reaction pathways and selectivity in the chemo-catalytic conversion of cellulose and its derivatives to ethylene glycol:A review

Biomass-to-ethylene glycol is an effective means to achieve high-value utilisation of cellulose but is hindered by low conversion efficiency and poor catalyst activity and stability.Glucose and cellobiose are derivatives of cellulose conversion to ethylene glycol,and it is found that studying the reaction process of both can help to understand the reaction mechanism of cellulose.It is desirable to develop a reusable,highly active catalyst to convert cellulose into ethylene glycol.This ideal catalyst might have one or more active sites described the conversion steps above.Here,we discuss the catalyst development of celluloseto-ethylene glycol,including tungsten,tin,lanthanide,and other transition metal catalysts,and special attention is given to the reaction mechanism and kinetics for preparing ethylene glycol from cellulose,and the economic advantages of biomass-to-ethylene glycol are briefly introduced.The insights given in this review will facilitate further development of efficient catalysts,for addressing the global energy crisis and climate change related to the use of fossil fuels.

Sn nucleation and growth from Sn(II)dissolved in ethylene glycol:Electrochemical behavior and temperature effect

Thermodynamic and kinetic aspects of Sn nucleation and growth processes onto a glassy carbon electrode from SnCl2·2H2O dissolved in ethylene glycol solutions were studied.Typical reduction and oxidation peaks observed in voltammograms have demonstrated the capability of ethylene glycol solutions to electrodeposit Sn.The temperature-dependence of diffusion coefficient values derived from potentiodynamic and potentiostatic studies helped to determine and validate estimations of the activation energy for Sn(II)bulk diffusion.Chronoamperometric results have identified that,the suitable model to describe the early stage of Sn electrodeposition could be composed of Sn three-dimensional nucleation and diffusion-controlled growth and water reduction contributions,which was duly validated by theoretical and experimental approaches.From the model,typical kinetic parameters such as the nucleation frequency of Sn(A),number density of Sn nuclei(N_(0)),and diffusion coefficient of Sn(II)ions(D),were determined.The presence of Sn nuclei with excellent quality and their structures were verified using SEM,EDX,and XRD techniques.

Novel sandwich structured glass fiber Cloth/Poly(ethylene oxide)-MXene composite electrolyte

Recently,poly(ethylene oxide)(PEO)-based solid polymer electrolytes have been attracting great attention,and efforts are currently underway to develop PEO-based composite electrolytes for next generation high performance all-solid-state lithium metal batteries.In this article,a novel sandwich structured solid-state PEO composite electrolyte is developed for high performance all-solid-state lithium metal batteries.The PEO-based composite electrolyte is fabricated by hot-pressing PEO,LiTFSI and Ti_(3)C_(2)T_(x) MXene nanosheets into glass fiber cloth(GFC).The as-prepared GFC@PEO-MXene electrolyte shows high mechanical properties,good electrochemical stability,and high lithium-ion migration number,which indicates an obvious synergistic effect from the microscale GFC and the nanoscale MXene.Such as,the GFC@PEO-1 wt%MXene electrolyte shows a high tensile strength of 43.43 MPa and an impressive Young's modulus of 496 MPa,which are increased by 1205%and 6048%over those of PEO.Meanwhile,the ionic conductivity of GFC@PEO-1 wt%MXene at 60℃ reaches 5.01×10^(-2) S m^(-1),which is increased by around 200%compared with that of GFC@PEO electrolyte.In addition,the Li/Li symmetric battery based on GFC@PEO-1 wt%MXene electrolyte shows an excellent cycling stability over 800 h(0.3 mA cm^(-2),0.3 mAh cm^(-2)),which is obviously longer than that based on PEO and GFC@PEO electrolytes due to the better compatibility of GFC@PEO-1 wt%MXene electrolyte with Li anode.Furthermore,the solid-state Li/LiFePO_(4) battery with GFC@PEO-1 wt%MXene as electrolyte demonstrates a high capacity of 110.2–166.1 mAh g^(-1) in a wide temperature range of 25–60C,and an excellent capacity retention rate.The developed sandwich structured GFC@PEO-1 wt%MXene electrolyte with the excellent overall performance is promising for next generation high performance all-solid-state lithium metal batteries.

Controlled delivery of ibuprofen from poly(vinyl alcohol)-poly(ethylene glycol) interpenetrating polymeric network hydrogels

Hydrogels composed of poly(vinyl alcohol)(PVA) and poly(ethylene glycol)(PEG) were synthesized using glutaraldehyde as crosslinker and investigated for controlled delivery of the common anti-inflammatory drug, ibuprofen(IBF). To regulate the drug delivery, solid inclusion complexes(ICs) of IBF in β–cyclodextrin(β–CD) were prepared and added to the hydrogels. The ICs were prepared by the microwave irradiation method, which is more environmentally benign. The formation of IC was confirmed by various analytical techniques and the synthesized hydrogels were also characterized. Controlled release of drug was achieved from the hydrogels containing the ICs in comparison to the rapid release from hydrogels containing free IBF.The preliminary kinetic analysis emphasized the crucial role of β–CD in the drug release process that influences the polymer relaxation, thereby leading to prolonged release. The cytotoxicity assay validated the hydrogels as non-toxic in nature and hence can be utilized for controlled delivery of IBF.

Selective swelling of polysulfone/poly(ethylene glycol) block copolymer towards fouling-resistant ultrafiltration membranes

Fouling resistance of ultrafiltration(UF) membranes is critical for their long-term usages in terms of stable performance, so convenient approaches to prepare fouling-resistant membranes are always anticipated. Herein, we demonstrate the facile fabrication of antifouling polysulfone-block-poly(ethylene glycol)(PSF-b-PEG, SFEG)composite membranes. SFEG layer was coated onto macroporous supports and cavitated by immerging them in acetone/n-propanol following the mechanism of selective swelling induced pore generation. Thus-produced SFEG membranes possessed high permeance and excellent mechanical strength. Meanwhile, the structures and separation performances of the SFEG layers can be continuously tuned through simply changing swelling durations. More importantly, the hydrophilic PEG chains were spontaneously enriched onto the pore walls through swelling treatment, endowing intrinsic antifouling property to the SFEG membranes. Bovine serum albumin(BSA)/humic acid(HA) fouling tests proved the prominent fouling resistance of SFEG membranes, and the fouling resistance is expected to be long-standing because of the firm connection between PEG chains and PSF matrix by covalent bonding.

Y-shaped block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide) synthesized by ATRP

Novel Y-shaped block copolymers of poly（ethylene glycol） and poly（N-isopropylacrylamide）, PEG-b-（PNIPAM）2, were successfully synthesized through atom transfer radical polymerization （ATRP）. A difunctional macroinitiator was prepared by esterification of 2,2-dichloroacetyl chloride with poly（ethylene glycol） monomethyl ether （PEG）. The copolymers were obtained via the ATRP ofN-isopropylacrylamide （NIPAM） at 30℃ with CuCl/Me6TREN as a catalyst system and DMF/H2O （v/v = 3：1） mixture as solvent. The resulting copolymers were characterized by gel permeation chromatography （GPC） and ^1H NMR. These block copolymers show controllable molecular weights and narrow molecular weight distributions （PDI 〈 1.15）. Their phase transition temperatures and the corresponding enthalpy changes in aqueous solution were measured by differential scanning calorimetry （DSC）. As a result, the phase transition temperature of PEG45-b-（PNIPAM55）2 is higher than that of PNIPAM, however, the corresponding enthalpy change is much lower, indicating the significant influence of the macromolecular composition and architecture on the phase transition.

THE STRUCTURE AND PROPERTIES OF CHITOSAN/POLYETHYLENE GLYCOL/SILICA TERNARY HYBRID ORGANIC-INORGANIC FILMS

The ternary hybrid films consisting of chitosan(CS),polyethylene glycol(PEG)and nano-sized silica which was surface-modified by amino groups(RNSA)were prepared.The structures of the blend membranes were characterized by attenuation total reflection-infrared spectroscopy(ATR-IR),X-ray diffraction(XRD),optical microscopy(OM)and differential scanning calorimetry(DSC).The results showed that the addition of silica affected not only the distribution and crystallinity of PEG on the sample surface,but also the pha...

SURFACE MODIFICATION OF BLEND FILMS COMPOSED OF SILK FIBROIN AND POLY(ETHYLENE GLYCOL) MACROMER AND THEIR IN VITRO ANTITHROMBOGENICITY

In order to improve the blood compatibility of silk fibroin (SF), poly(ethylene glycol) macromer (PEGM) in different amounts was added to the SF film to incorporate C=C group into the surface of blend films which were then modified by SO2 gas plasma treatment. ATR-FITR and XPS were used to analyze the chemical change which had occurred on the film's surface. When the content of sulfur on the surface of blend films surpasses 1.59%, the antithrombogenicity of plasma treated films increases remarkably due to surface sulfonation. This result implies that SF with blend of PEGM after SO2 plasma treatment have potential use for making blood-contacting biomaterials.

Poly(L-lactide)-Poly(ethylene glycol) Multiblock Copolymers: Synthesis and Properties

Poly (L-lactide)-poly(ethylene glycol) multiblock copolymers with predetermined block lengths were synthesized by polycondensation of PLA diols and PEG diacids. These copolymers presented special properties, such as better miscibility between the two components, low crystallinity and better hydrophilicity, which can be modulated by adjusting the block lengths of the two components.

Optimisation of Bio-polyol Production from Cassava Residue Using Ethylene Glycol as the Liquefaction Reagent

Cassava residue was liquefied by using ethylene glycol(EG), ethylene carbonate, propylene carbonate and polyethylene glycol(molecular weight: 400 g/mol) as the liquefaction reagent respectively at the temperature of 130-170 ℃ with sulfuric acid as the catalyst. The influences of liquefaction parameters, such as the type of liquefaction reagents, mass ratio of EG/cassava residue, liquefaction temperature and time on the properties of the products were discussed. The optimum liquefaction conditions were obtained when the mass ratio of EG/cassava residue was 6:1(w/w), the liquefaction temperature was 150 ℃, the liquefaction time was3 h and the mass fraction of concentrated sulfuric acid/EG was 2.5 wt%. The hydroxyl numbers and residue content of the liquefied products at optimal conditions were 1 137 mgKOH/g and 0.43%, respectively. FT-IR spectrum showed that the liquefaction product of cassava residue was polyether polyol and could be used to prepare polyurethane material or alkyd resins.

PREPARATION OF HIGH DENSITY POLYETHYLENE/POLYETHYLENE-BLOCK-POLY(ETHYLENE GLYCOL)COPOLYMER BLEND POROUS MEMBRANES VIA THERMALLY INDUCED PHASE SEPARATION PROCESS AND THEIR PROPERTIES

High density polyethylene （HDPE）/polyethylene-block-poly（ethylene glycol） （PE-b-PEG） blend porous membranes were prepared via thermally induced phase separation （TIPS） process using diphenyl ether （DPE） as diluent. The phase diagrams of HDPE/PE-b-PEG/DPE systems were determined by optical microscopy and differential scanning calorimetry （DSC）. By varying the content of PE-b-PEG, the effects of PE-b-PEG copolymer on morphology and crystalline structure of membranes were studied by scanning electron microscopy （SEM） and wide angle X-ray diffraction （WAXD）. The chemical compositions of whole membranes and surface layers were characterized by elementary analysis, Fourier transform infrared spectroscopy-attenuated total reflection （FTIR-ATR） and X-ray photoelectron spectroscopy （XPS）. Water contact angle, static protein adsorption and water flux experiments were used to evaluate the hydrophilicity, antifouling and water permeation properties of the membranes. It was found that the addition of PE-b-PEG increased the pore size of the obtained blend membranes. In the investigated range of PE-b-PEG content, the PEG blocks could not aggregate into obviously separated domains in membrane matrix. More importantly, PE-b-PEG could not only be retained stably in the membrane matrix during membrane formation, but also enrich at the membrane surface layer. Such stability and surface enrichment of PE-b-PEG endowed the blend membranes with improved hydrophilicity, protein absorption resistance and water permeation properties, which would be substantially beneficial to HDPE membranes for water treatment application.

RING-OPENING COPOLYMERIZATION OF DL-LACTIDE AND POLY(ETHYLENE GLYCOL) INITIATED BY LANTHANUM ACETATE AND APPLICATION OF THE COPOLYMER AS MATRIX OF MICROSPHERES CONTAINING VIBRIO CHOLERA ANTIGENS

Poly-dl-lactide-poly(ethylene glycol) (PELA) triblock copolymers were synthesized with lanthanum acetate as the initiator. PELA microspheres with entrapped Vibrio Cholera antigen and outer membrane protein (OMP) were prepared by a double emulsion W/O/W based on solvent extraction methods. The obtained microspheres showed smooth and spherical surface and their size varied between 0.5 and 5.0 mu m, which are suitable for oral targeting delivery system. The distribution tests in rabbits and mice through scanning electronic micrography and fluorescence microscope indicated that microspheres have successfully reached the immunization-related tissues, such as the liver, spleen and intestinal peyer's patches, following oral administration. The PELA microspheres were also evaluated as an efficient antigen delivery system by enhancing a higher protective ratio against live Vibrios Cholera.

Improvement of porous polyvinylidene fluoride-co-hexafluropropylene hollow fiber membranes for sweeping gas membrane distillation of ethylene glycol solution

Porous polyvinylidene fluoride-co-hexafluropropylene(PVDF-HFP)hollow fiber membranes were fabricated through a wet spinning process.In order to improve the membrane structure,composition of the polymer solution was adjusted by studying ternary phase diagrams of polymer/solvent/non-solvent.The prepared membranes were used for sweeping gas membrane distillation(SGMD)of 20 wt% ethylene glycol(EG)aqueous solution.The membranes were characterized by different tests such as N2 permeation,overall porosity,critical water entry pressure(CEPw),water contact angle and collapsing pressure.From FESEM examination,addition of 3 wt% glycerol in the PVDF-HFP solution,produced membranes with smaller finger-likes cavities,higher surface porosity and smaller pore sizes.Increasing the polymer concentration up to 21 wt% resulted in a dense spongy structure which could significantly reduce the N2 permeance.The membrane prepared by 3 wt% glycerol and 17 wt% polymer demonstrated an improved structure with mean pore size of 18 nm and a high surface porosity of 872 m^−1.CEPw of 350 kPa and overall porosity of 84% were also obtained for the improved membrane.Collapsing pressure of the membranes relatively improved by increasing the polymer concentration.From the SGMDtest,the developed membrane represented a maximumpermeate flux of 28 kg·m^−2·h^−1 which is almost 19% higher than the flux of plain membrane.During 120 h of a long-termSGMD operation,a gradual flux reduction of 30% was noticed.In addition,EG rejection reduced from 100% to around 99.5% during 120 h of the operation.

Synthesis and Hydrophilic Performance of Poly(Lactic Acid)-Poly(Ethylene Glycol) Block Copolymers

Lactide was synthesized using lactic acid and stannous octoate as raw material and catalyst, respectively. Poly(lactic acid)-poly(ethylene glycol) (PLA-PEG) was prepared by lactide and poly (ethylene glycol) (PEG) via ring-opening polymerization. The most appropriate technological conditions of synthesis of lactide were researched in the paper. The copolymers were measured by Infrared spectroscopy (IR) and 1H nuclear magnetic resonance (1H NMR). The results proved that the lactide and PLA-PEG were synthesized successfully. Hydrophilic performance of the copolymer was measured by a water contact angle tester after prepared into a flat membrane. The water contact angle changed from 81.5? to 71.6?, which proved that the hydrophily of PLA-PEG was better than PLA.

Mechanism of shales stabilization by hydrophobized poly(ethylene glycol)/K^(+) in water-base drilling fluids

The mechanism of the hydrophobized poly(ethylene glycol)(PEG)/K^(+) system inhibiting shale hydration was studied by laboratory experiment. The inhibition performance was evaluated through cuttings hot-rolling dispersion, bentonite inhibition and contact angle tests. The inhibition became stronger as contact angle and PEG concentration increased. A modified cuttings hot-rolling dispersion experiment suggested that these molecular systems did not act through the thermally activated mud emulsion(TAME) mechanism. The interaction of the PEG/K^(+) with clay samples was investigated through adsorption studies and by Fourier transform infrared spectroscopy(FT-IR), X-ray diffraction(XRD) and thermogravimetric analysis(TGA). The adsorption isotherms showed that the presence of K^(+) increased the PEG affinity for the clay surface. This inhibition effect was accompanied by a reduction of the bentonite hydration with PEG adsorption, evidenced by FT-IR, TGA and differential thermogravimetric(DTG) curves. XRD patterns were conclusive in showing that the presence of K^(+) ions limited the expansion of the clay interlamellar region to only one PEG layer, and the terminal hydrophobic segments of the PEG chains turned out to be determinant in enhancement of the inhibitory efficiency. The cuttings hot-rolling dispersion was carried out on water-base drilling fluid with PEG/K^(+), which proved the inhibition performance of PEG/K^(+) in oil field drilling.

Aggregation of Sodium Dodecyl Sulfonate in Poly-ethylene Glycol Aqueous Solutions Studied by Two-dimensional Nuclear Overhauser Enhancement Spectroscopy

Two-dimensional nuclear overhauser enhancement (2D NOESY)measurements show that sodium dodecyl sulfonate SDSN molecules co-aggregate with poly-ethylene glycol PEG in their aqueous solution at a concentration range of SDSN between the so-called co-aggregation concentration (cac) and the. Normal critical micellar concentration (cmc). SDSN micelles are formed when the cmc of SDSN is reached with PEG uniformly distributed in the interior.

Flotation of carbonaceous copper shale-quartz mixture with poly(ethylene glycol) alkyl ethers

The influence of different poly（ethylene glycol） alkyl ethers（CnH2n＋1O（C2H4O）mH, CnEm） on flotation of carbonaceous copper shale mixed with quartz as a gangue mineral was investigated. The results show that all of the ethers C4E1, C4E2, C4E3, C2E2, C6E2 investigated can be used for the flotation of carbonaceous copper shale. The best selectivity of separation in the flotation of the carbonaceous copper shale and quartz mixture is obtained with the C4E2 and C2E2 ethers. The obtained data can be used for developing separation of organic carbon present in carbonaceous shale at a rougher flotation stage on an industrial scale.

AN APPROACH TO SYNTHESIZE POLY(ETHYLENE GLYCOL)-b-POLY(ε-CAPROLACTONE) WITH TERMINAL AMINO GROUP via SCHIFF'S BASE AS AN INITIATOR

A new method to synthesize a degradable terminal amino group-containing copolymer,poly(ethylene glycol)-b- poly(ε-caprolactone)(MPEG-PCL-NH_2),was developed in the following three steps:(1)the ring-opening polymerization (ROP)ofε-caprolactone from the Schiff base prepared from benzatdehyde and ethanolamine(Ph-CH=NCH_2CH_2OH)used as an initiator to obtain heterobifunctional poly(ε-caprolactone)with one terminal Schiff base group and one hydroxyl group (HO-PCL-CH_2CH_2N=CH-Ph);(2)the coupling reaction of two ...

Stereoselective Synthesis of Polysubstituted Cyclopropanes from Poly(ethylene glycol) Supported Pyridinium Ylide

Polysubstituted cyclopropanes were efficiently prepared with poly（ethylene glycol）（PEG） as soluble support. The reaction of PEG-supported pyridinium ylide with arylidenemalononitrile（R=CN） or ethyl arylidenecyanoa-cetate（R=COOEt） in the presence of triethylamine（TEA） afforded PEG-supported cyclopropanecarboxylates, which were cleaved by 1% KCN/EtOH to obtain polysubstituted cyclopropanes with exclusive trans-selectivity and good yields.

Enzymatic Synthesis and Characterization of Novel Amphiphilic Triblock Copolymer Poly(p-dioxanone-co-5-benzyloxytrimethylene carbonate)-block-poly(ethylene glycol)

Novel amphiphilic triblock copolymer poly（p-dioxanone-co-5-benzyloxytrimethylene carbonate）-block-poly（ethylene glycol）-block-poly（p-dioxanone-co-5-benzyloxytrimethylene carbonate） （p（PDO-co-BTMC）-b-PEG-b-p（PDO-co-BTMC）） was successfully synthesized using immobilized porcine pancreas lipase on porous silica particles （IPPL） as the catalyst for the fLrSt time. 1H NMR, 13C NMR and GPC analysis were used to confirm the structures of resulting copolymers. The molecular weight （Mn） of the copolymer with feed ratio of 69：20：11 （BTMC： PDO： PEG ） was 31300 g/mol and the polydispersity was 1.85, while the Mn decreased to 25000 g/mol and polydispersity of 1.93 with the feed ratio of 50：40：10.