A series of soluble poly(p-phenylene vinylene) (PPV) derivatives were synthesized through dehydrochlorination with the p-metaoxy phenol as starting materials. The electronic characteristics of PPV derivatives were stu...A series of soluble poly(p-phenylene vinylene) (PPV) derivatives were synthesized through dehydrochlorination with the p-metaoxy phenol as starting materials. The electronic characteristics of PPV derivatives were studied.展开更多
报道了聚苯胺中间氧化态(emeraldine base form PANI-EB)空穴传输层对以PPV衍生物(PTA-PPV,PTA-DMPPV和MEH-PPV)为发光层和Alq3为电子传输层构成的多层结构的发光二极管的影响。实验结果表明,在器件中PANI-EB空穴层的引入能有效地降低...报道了聚苯胺中间氧化态(emeraldine base form PANI-EB)空穴传输层对以PPV衍生物(PTA-PPV,PTA-DMPPV和MEH-PPV)为发光层和Alq3为电子传输层构成的多层结构的发光二极管的影响。实验结果表明,在器件中PANI-EB空穴层的引入能有效地降低器件的启亮电压和提高器件的发光亮度,其影响程度依赖于PPV衍生物的结构。展开更多
Materials with emission over the whole visible range(400-800 nm)have been obtained through incorporating single-colored CdTe nanocrystals(NCs)into a poly(p-phenylene vinylene)(PPV)precursor[the sulfonium polyelectroly...Materials with emission over the whole visible range(400-800 nm)have been obtained through incorporating single-colored CdTe nanocrystals(NCs)into a poly(p-phenylene vinylene)(PPV)precursor[the sulfonium polyelectrolyte precursor of PPV].Firstly,the quantum yield(QY)of the PPV precursor was improved to~50%via heat treatment of a mixed solution of the PPV precursor and poly(vinyl alcohol)(PVA)at 100°C for 3 min.Then,single-colored CdTe NCs were incorporated into the mixed solution.The introduction of the PVA was necessary to reduce the electrostatic interaction between the PPV precursor and CdTe NCs,which improved their compatibility.The reduced electrostatic interaction eliminated Förster resonance energy transfer(FRET)processes between NCs,as well as between NCs and the PPV precursor,which allowed the functional integration of the polymer and NCs.Consequently,polymer/NC composites with almost any Commission Internationale de L’Eclairage(CIE)coordinates can be achieved by simply changing the size and amount of the NCs.In particular,when the emission wavelength of the CdTe NCs was 559 nm,a pure white-light emitting material with CIE coordinates(0.337,0.332)was obtained.展开更多
This paper deals with the relationships between the structure of poly（p-phenylene vinylene）（PPV） film and treatment temperature and their mechanical properties.The chemical structures and aggregated structures of ...This paper deals with the relationships between the structure of poly（p-phenylene vinylene）（PPV） film and treatment temperature and their mechanical properties.The chemical structures and aggregated structures of PPV precursor（PPVpre） and PPV treated at three node temperatures（125,155 and 230 ℃） were investigated by FTIR spectrometry and X-ray diffraction.The results show that the content of trans-conformation and the size of the crystalline domains increased with the increase of treatment temperature.The mechanical performances of the corresponding polymers were studied by nanoindentation.The elastic modulus and hardness of PPV films decreased with the increases of the content of trans-conformation and the size of the crystalline domains.These results suggest that the conformation and the size of the crystalline domains are able to induce the elastic modulus and hardness variation of PPV films.展开更多
文摘A series of soluble poly(p-phenylene vinylene) (PPV) derivatives were synthesized through dehydrochlorination with the p-metaoxy phenol as starting materials. The electronic characteristics of PPV derivatives were studied.
文摘报道了聚苯胺中间氧化态(emeraldine base form PANI-EB)空穴传输层对以PPV衍生物(PTA-PPV,PTA-DMPPV和MEH-PPV)为发光层和Alq3为电子传输层构成的多层结构的发光二极管的影响。实验结果表明,在器件中PANI-EB空穴层的引入能有效地降低器件的启亮电压和提高器件的发光亮度,其影响程度依赖于PPV衍生物的结构。
基金This work was supported by National Natural Science Foundation of China(NSFC)(Nos.20804008,20974038,50973039,and 20921003)National Program on Key Basic Research Project(973 Program)(Nos.2007CB936402 and 2009CB939701)the China Postdoctoral Science Foundation(No.20090450139).
文摘Materials with emission over the whole visible range(400-800 nm)have been obtained through incorporating single-colored CdTe nanocrystals(NCs)into a poly(p-phenylene vinylene)(PPV)precursor[the sulfonium polyelectrolyte precursor of PPV].Firstly,the quantum yield(QY)of the PPV precursor was improved to~50%via heat treatment of a mixed solution of the PPV precursor and poly(vinyl alcohol)(PVA)at 100°C for 3 min.Then,single-colored CdTe NCs were incorporated into the mixed solution.The introduction of the PVA was necessary to reduce the electrostatic interaction between the PPV precursor and CdTe NCs,which improved their compatibility.The reduced electrostatic interaction eliminated Förster resonance energy transfer(FRET)processes between NCs,as well as between NCs and the PPV precursor,which allowed the functional integration of the polymer and NCs.Consequently,polymer/NC composites with almost any Commission Internationale de L’Eclairage(CIE)coordinates can be achieved by simply changing the size and amount of the NCs.In particular,when the emission wavelength of the CdTe NCs was 559 nm,a pure white-light emitting material with CIE coordinates(0.337,0.332)was obtained.
基金Supported by the National Natural Science Foundation of China（No.51173155）.
文摘This paper deals with the relationships between the structure of poly（p-phenylene vinylene）（PPV） film and treatment temperature and their mechanical properties.The chemical structures and aggregated structures of PPV precursor（PPVpre） and PPV treated at three node temperatures（125,155 and 230 ℃） were investigated by FTIR spectrometry and X-ray diffraction.The results show that the content of trans-conformation and the size of the crystalline domains increased with the increase of treatment temperature.The mechanical performances of the corresponding polymers were studied by nanoindentation.The elastic modulus and hardness of PPV films decreased with the increases of the content of trans-conformation and the size of the crystalline domains.These results suggest that the conformation and the size of the crystalline domains are able to induce the elastic modulus and hardness variation of PPV films.
