Poly（propylene carbonate） （PPC） was melt blended in a batch mixer with poly（butylene carbonate） （PBC） in an effort to improve the toughness of the PPC without compromising its biodegradability and biocompatibi...Poly（propylene carbonate） （PPC） was melt blended in a batch mixer with poly（butylene carbonate） （PBC） in an effort to improve the toughness of the PPC without compromising its biodegradability and biocompatibility. DMA results showed that the PPC/PBC blends were an immiscible two-phase system. With the increase in PBC content, the PPC/PBC blends showed decreased tensile strength, however, the elongation at break was increased to 230% for the 50/50 PPC/PBC blend. From the tensile strength experiments, the Pukanszky model gave credit to the modest interfacial adhesion between PPC and PBC, although PPC/PBC was immscible. The impact strength increased significantly which indicated the toughening effects of the PBC on PPC. SEM examination showed that cavitation and shear yielding were the major toughening mechanisms in the blends subjected the impact tests. TGA measurements showed that the thermal stability of PPC decreased with the incorporation of PBC. Rheological investigation demonstrated that the addition of PBC reduced the value of storage modulus, loss modulus and complex viscosity of the PPC/PBC blends to some extent. Moreover, the addition of PBC was found to increase the processability of PPC in extrusion. The introduction of PBC provided an efficient and novel toughened method to extend the application area of PPC.展开更多
Mg-A1 mixed oxides with different Mg/A1 molar ratio were prepared by thermal decomposition of hydrotalcite- like precursors at 500 ℃ for 5.0 h and used as catalysts for the transesterification of diphenyl carbonate w...Mg-A1 mixed oxides with different Mg/A1 molar ratio were prepared by thermal decomposition of hydrotalcite- like precursors at 500 ℃ for 5.0 h and used as catalysts for the transesterification of diphenyl carbonate with 1,4-butanediol to synthesize high-molecular-weight poly（butylene carbonate） （PBC）. The structure-activity correlations of these catalysts in this transesterification process were discussed by means of various characterization techniques. It was found that the chain growth for the formation of PBC can only be obtained through connecting -OH and -OC（C）OC6H5 end-group upon removing the generated phenol, and the sample with Mg/A1 molar ratio of 4.0 exhibited the best catalytic performance, giving PBC with Mw of 1.64 × 105 g/mol at 210℃ for 3.0 h. This excellent activity depended mainly on the specific surface area and basicity rather than pore structure or crystallite size of MgO.展开更多
基金financially supported by the fund of Science&Technology Bureau of Jilin Province of China(No.20126023)the National High Technology Research and Development Program of China(863 Program)(No.2012AA062904)the National Natural Science Foundation of China(No.51021003)
文摘Poly（propylene carbonate） （PPC） was melt blended in a batch mixer with poly（butylene carbonate） （PBC） in an effort to improve the toughness of the PPC without compromising its biodegradability and biocompatibility. DMA results showed that the PPC/PBC blends were an immiscible two-phase system. With the increase in PBC content, the PPC/PBC blends showed decreased tensile strength, however, the elongation at break was increased to 230% for the 50/50 PPC/PBC blend. From the tensile strength experiments, the Pukanszky model gave credit to the modest interfacial adhesion between PPC and PBC, although PPC/PBC was immscible. The impact strength increased significantly which indicated the toughening effects of the PBC on PPC. SEM examination showed that cavitation and shear yielding were the major toughening mechanisms in the blends subjected the impact tests. TGA measurements showed that the thermal stability of PPC decreased with the incorporation of PBC. Rheological investigation demonstrated that the addition of PBC reduced the value of storage modulus, loss modulus and complex viscosity of the PPC/PBC blends to some extent. Moreover, the addition of PBC was found to increase the processability of PPC in extrusion. The introduction of PBC provided an efficient and novel toughened method to extend the application area of PPC.
基金financially supported by the National Key Technology Pillar Program(No.2013BAC11B05)Key Research and Innovation Program of Jiangsu Province(No.BE2015055)the Science&Technology Pillar Program in Sichuan Province(No.2016GZ0228)
文摘Mg-A1 mixed oxides with different Mg/A1 molar ratio were prepared by thermal decomposition of hydrotalcite- like precursors at 500 ℃ for 5.0 h and used as catalysts for the transesterification of diphenyl carbonate with 1,4-butanediol to synthesize high-molecular-weight poly（butylene carbonate） （PBC）. The structure-activity correlations of these catalysts in this transesterification process were discussed by means of various characterization techniques. It was found that the chain growth for the formation of PBC can only be obtained through connecting -OH and -OC（C）OC6H5 end-group upon removing the generated phenol, and the sample with Mg/A1 molar ratio of 4.0 exhibited the best catalytic performance, giving PBC with Mw of 1.64 × 105 g/mol at 210℃ for 3.0 h. This excellent activity depended mainly on the specific surface area and basicity rather than pore structure or crystallite size of MgO.
