The copolymer poly（3-（4-fluorophenyl）thiophene-co-3-methylthiophene） was successfully prepared from mixtures of 3-（4-fluorophenyl）thiophene （FPT） and 3-methylthiophene （MET） via electrochemical oxidation in ...The copolymer poly（3-（4-fluorophenyl）thiophene-co-3-methylthiophene） was successfully prepared from mixtures of 3-（4-fluorophenyl）thiophene （FPT） and 3-methylthiophene （MET） via electrochemical oxidation in boron trifluoride diethyl etherate （BFEE） and its mixed electrolytes with acetonitrile （ACN）. The influence of monomer concentration ratios on the copolymerization was investigated by using linear sweep voltammetry and cyclic voltammetry. The structure and morphology of these copolymer films were elucidated by UV-Vis, infrared spectroscopy, elemental analysis, thermal analysis and scanning electron microscopy （SEM）, respectively. The results showed that the molar ratio of FPT and MeT units, when copolymer was electrodeposited from feed ratio of FPT：MeT = 1：2, was about 1.08：1. In addition, the introduction of ACN into BFEE has little effect on the properties of as-formed copolymers.展开更多
The Raman spectra of poly(3-methylthiophene) (PMeT) films with different thicknesses, which have been electrochemically deposited on a flat stainless steel electrode surface by direct oxidation of 3-methylthiophene in...The Raman spectra of poly(3-methylthiophene) (PMeT) films with different thicknesses, which have been electrochemically deposited on a flat stainless steel electrode surface by direct oxidation of 3-methylthiophene in boron trifluoride diethyl etherate (BFEE) at a constant applied potential of 1.38 V (versus SCE), have been investigated by excitation with a 633-nm laser beam. The spectroscopic results demonstrated that the doping level of PMeT film was increasing during film growth. This finding was also confirmed by electrochemical examination. Moreover, the Raman bands assigned to radical cations and dications in doped PMeT films were found approximately at 1420 and 1400 cm(-1), respectively. Radical cations and dications coexist on the backbone of PMeT as conductive species and their concentrations increase with the increase of doping level. Successive cyclic voltammetry was proved to be an effective approach to improving the doping level of as-grown thin compact PMeT film.展开更多
Poly[R-3-hydroxybutyrate-co-(R-3-hydroxyvalerate)] (PHBVs) copolymers are promising biopolymers, which could substitute petroleum-based plastics for various applications. PHB and PHBV pellets were processed on a custo...Poly[R-3-hydroxybutyrate-co-(R-3-hydroxyvalerate)] (PHBVs) copolymers are promising biopolymers, which could substitute petroleum-based plastics for various applications. PHB and PHBV pellets were processed on a customized 3D printer via Fused Granular Manufacturing (FGM) approach modified with a Mahor screw extruder. To anticipate the behaviour of PHBVs when transformed using conventional thermo-mechanical shaping processes, thermal and mechanical analyses were carried out in order to better understand the effect of annealing temperature on their crystallization behaviour and mechanical properties of PHB polymer and PHBV copolymer. The objectives of the present work were to propose an experimental strategy to study the melting and crystallization events, crystalline structure changes, and mechanical performances of both PHB homopolymer and PHBV copolymer according to identical thermal annealing treatments. A monitoring of 3D printed PHB and PHBV structures was achieved by coupling Differential Scanning Calorimetry (DSC) and tensile tests. .展开更多
Recently,poly(ethylene oxide)(PEO)-based solid polymer electrolytes have been attracting great attention,and efforts are currently underway to develop PEO-based composite electrolytes for next generation high performa...Recently,poly(ethylene oxide)(PEO)-based solid polymer electrolytes have been attracting great attention,and efforts are currently underway to develop PEO-based composite electrolytes for next generation high performance all-solid-state lithium metal batteries.In this article,a novel sandwich structured solid-state PEO composite electrolyte is developed for high performance all-solid-state lithium metal batteries.The PEO-based composite electrolyte is fabricated by hot-pressing PEO,LiTFSI and Ti_(3)C_(2)T_(x) MXene nanosheets into glass fiber cloth(GFC).The as-prepared GFC@PEO-MXene electrolyte shows high mechanical properties,good electrochemical stability,and high lithium-ion migration number,which indicates an obvious synergistic effect from the microscale GFC and the nanoscale MXene.Such as,the GFC@PEO-1 wt%MXene electrolyte shows a high tensile strength of 43.43 MPa and an impressive Young's modulus of 496 MPa,which are increased by 1205%and 6048%over those of PEO.Meanwhile,the ionic conductivity of GFC@PEO-1 wt%MXene at 60℃ reaches 5.01×10^(-2) S m^(-1),which is increased by around 200%compared with that of GFC@PEO electrolyte.In addition,the Li/Li symmetric battery based on GFC@PEO-1 wt%MXene electrolyte shows an excellent cycling stability over 800 h(0.3 mA cm^(-2),0.3 mAh cm^(-2)),which is obviously longer than that based on PEO and GFC@PEO electrolytes due to the better compatibility of GFC@PEO-1 wt%MXene electrolyte with Li anode.Furthermore,the solid-state Li/LiFePO_(4) battery with GFC@PEO-1 wt%MXene as electrolyte demonstrates a high capacity of 110.2–166.1 mAh g^(-1) in a wide temperature range of 25–60C,and an excellent capacity retention rate.The developed sandwich structured GFC@PEO-1 wt%MXene electrolyte with the excellent overall performance is promising for next generation high performance all-solid-state lithium metal batteries.展开更多
With concerns in energy crisis and global warming, researchers are actively investigating alternative energy renewable solutions. Among the various methods, piezoelectric transduction stands out due to its impressive ...With concerns in energy crisis and global warming, researchers are actively investigating alternative energy renewable solutions. Among the various methods, piezoelectric transduction stands out due to its impressive electromechanical coupling factor and coefficient. As a result, piezoelectric energy harvesting has garnered significant attention from the scientific community. In this study, we explored methods to enhance the piezoelectric properties of polyvinylidene fluoride (PVDF) through two distinct approaches. The first approach involved applying external high voltages at various stages during the mixture reaction. The goal was to determine whether this voltage application could alter or enhance PVDF’s piezoelectric conformation by improving the alignment of polarized dipoles. In the second part of our study, we investigated the effects of incorporating various nanostructures (including Iron Oxide, Magnesium Oxide, and Zinc Oxide) into PVDF. To analyze changes in PVDF’s crystalline structure, we utilized Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Diffraction (XRD) techniques. Additionally, we measured the electric polarization of samples using a Precision LC Meter and examined the morphology of nanofibers through Scanning Electron Microscopy (SEM).展开更多
基金This work was financially supported by the National Natural Science Foundation of China (No. 20564001)the Natural Science Foundation of Jiangxi Province (No. 050017)
文摘The copolymer poly（3-（4-fluorophenyl）thiophene-co-3-methylthiophene） was successfully prepared from mixtures of 3-（4-fluorophenyl）thiophene （FPT） and 3-methylthiophene （MET） via electrochemical oxidation in boron trifluoride diethyl etherate （BFEE） and its mixed electrolytes with acetonitrile （ACN）. The influence of monomer concentration ratios on the copolymerization was investigated by using linear sweep voltammetry and cyclic voltammetry. The structure and morphology of these copolymer films were elucidated by UV-Vis, infrared spectroscopy, elemental analysis, thermal analysis and scanning electron microscopy （SEM）, respectively. The results showed that the molar ratio of FPT and MeT units, when copolymer was electrodeposited from feed ratio of FPT：MeT = 1：2, was about 1.08：1. In addition, the introduction of ACN into BFEE has little effect on the properties of as-formed copolymers.
基金This work was supported by the National Natual Science Foundation of China (No. 50073012 & No. 50133010).
文摘The Raman spectra of poly(3-methylthiophene) (PMeT) films with different thicknesses, which have been electrochemically deposited on a flat stainless steel electrode surface by direct oxidation of 3-methylthiophene in boron trifluoride diethyl etherate (BFEE) at a constant applied potential of 1.38 V (versus SCE), have been investigated by excitation with a 633-nm laser beam. The spectroscopic results demonstrated that the doping level of PMeT film was increasing during film growth. This finding was also confirmed by electrochemical examination. Moreover, the Raman bands assigned to radical cations and dications in doped PMeT films were found approximately at 1420 and 1400 cm(-1), respectively. Radical cations and dications coexist on the backbone of PMeT as conductive species and their concentrations increase with the increase of doping level. Successive cyclic voltammetry was proved to be an effective approach to improving the doping level of as-grown thin compact PMeT film.
文摘Poly[R-3-hydroxybutyrate-co-(R-3-hydroxyvalerate)] (PHBVs) copolymers are promising biopolymers, which could substitute petroleum-based plastics for various applications. PHB and PHBV pellets were processed on a customized 3D printer via Fused Granular Manufacturing (FGM) approach modified with a Mahor screw extruder. To anticipate the behaviour of PHBVs when transformed using conventional thermo-mechanical shaping processes, thermal and mechanical analyses were carried out in order to better understand the effect of annealing temperature on their crystallization behaviour and mechanical properties of PHB polymer and PHBV copolymer. The objectives of the present work were to propose an experimental strategy to study the melting and crystallization events, crystalline structure changes, and mechanical performances of both PHB homopolymer and PHBV copolymer according to identical thermal annealing treatments. A monitoring of 3D printed PHB and PHBV structures was achieved by coupling Differential Scanning Calorimetry (DSC) and tensile tests. .
基金support of the Fundamental Research Funds for the Central Universities(No.2022CDJQY-004)the Fund for Innovative Research Groups of Natural Science Foundation of Hebei Province(No.A2020202002).
文摘Recently,poly(ethylene oxide)(PEO)-based solid polymer electrolytes have been attracting great attention,and efforts are currently underway to develop PEO-based composite electrolytes for next generation high performance all-solid-state lithium metal batteries.In this article,a novel sandwich structured solid-state PEO composite electrolyte is developed for high performance all-solid-state lithium metal batteries.The PEO-based composite electrolyte is fabricated by hot-pressing PEO,LiTFSI and Ti_(3)C_(2)T_(x) MXene nanosheets into glass fiber cloth(GFC).The as-prepared GFC@PEO-MXene electrolyte shows high mechanical properties,good electrochemical stability,and high lithium-ion migration number,which indicates an obvious synergistic effect from the microscale GFC and the nanoscale MXene.Such as,the GFC@PEO-1 wt%MXene electrolyte shows a high tensile strength of 43.43 MPa and an impressive Young's modulus of 496 MPa,which are increased by 1205%and 6048%over those of PEO.Meanwhile,the ionic conductivity of GFC@PEO-1 wt%MXene at 60℃ reaches 5.01×10^(-2) S m^(-1),which is increased by around 200%compared with that of GFC@PEO electrolyte.In addition,the Li/Li symmetric battery based on GFC@PEO-1 wt%MXene electrolyte shows an excellent cycling stability over 800 h(0.3 mA cm^(-2),0.3 mAh cm^(-2)),which is obviously longer than that based on PEO and GFC@PEO electrolytes due to the better compatibility of GFC@PEO-1 wt%MXene electrolyte with Li anode.Furthermore,the solid-state Li/LiFePO_(4) battery with GFC@PEO-1 wt%MXene as electrolyte demonstrates a high capacity of 110.2–166.1 mAh g^(-1) in a wide temperature range of 25–60C,and an excellent capacity retention rate.The developed sandwich structured GFC@PEO-1 wt%MXene electrolyte with the excellent overall performance is promising for next generation high performance all-solid-state lithium metal batteries.
文摘With concerns in energy crisis and global warming, researchers are actively investigating alternative energy renewable solutions. Among the various methods, piezoelectric transduction stands out due to its impressive electromechanical coupling factor and coefficient. As a result, piezoelectric energy harvesting has garnered significant attention from the scientific community. In this study, we explored methods to enhance the piezoelectric properties of polyvinylidene fluoride (PVDF) through two distinct approaches. The first approach involved applying external high voltages at various stages during the mixture reaction. The goal was to determine whether this voltage application could alter or enhance PVDF’s piezoelectric conformation by improving the alignment of polarized dipoles. In the second part of our study, we investigated the effects of incorporating various nanostructures (including Iron Oxide, Magnesium Oxide, and Zinc Oxide) into PVDF. To analyze changes in PVDF’s crystalline structure, we utilized Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Diffraction (XRD) techniques. Additionally, we measured the electric polarization of samples using a Precision LC Meter and examined the morphology of nanofibers through Scanning Electron Microscopy (SEM).
