A fluorine-containing polyacrylate copolymer emulsion was synthesized by a seed emulsion polymerization method, in which methyl methacrylate （MMA） and butyl acrylate （BA） were used as main monomers and hexafluorob...A fluorine-containing polyacrylate copolymer emulsion was synthesized by a seed emulsion polymerization method, in which methyl methacrylate （MMA） and butyl acrylate （BA） were used as main monomers and hexafluorobutyl methacrylate （HFMA） as fluorine-containing monomer. The structure and properties were characterized by Fourier transform infrared spectrum （FT-IR）, transmission electron microscopy （TEM）, particle size analysis, X-ray photoelectron spectroscopy （XPS）, contact angle （CA）, differential scanning calorimetry （DSC） and thermogravimetry （TG） analysis. The FTIR and TEM results showed that HFMA was effectively involved in the emulsion copolymerization, and the formed emulsion particles had a core-shell structure and a narrow particle size distribution. XPS and CA analysis revealed that a gradient concentration of fluorine existed in the depth profile of fluorine-containing emulsion film which was richer in fluorine and more hydrophobic in one side. DSC and TG analysis also showed that a clear core-shell structure existed in the fluorine-containing emulsion particles, and their film showed higher thermal stability than that of fluorine-free emulsion.展开更多
A series of polyacrylate emulsions were blended with tackifier resin emulsions such as modified rosin emulsion, C5 resin and C9 resin emulsion. The miscibility of the polyacrylates and tackifier resins was investigate...A series of polyacrylate emulsions were blended with tackifier resin emulsions such as modified rosin emulsion, C5 resin and C9 resin emulsion. The miscibility of the polyacrylates and tackifier resins was investigated by means of SEM and visual observation. The phase diagrams of the miscibility change systematically with the polarity of polyacrylates and tackifier resins. The influence of the content of the tackifier resins on the adhesion properties of the; polyacrylate emulsions were also studied. The results show that the 180 degrees C peel strength is improved as the amount of the tackifier resin increases and comes to a maximum at a specific content. The ball tack property decreases slightly and the hold strength changes complicatedly as the tackifier resin increases.展开更多
An impedance type humidity sensor based on the polyacrylic emulsion containing magnesium chloride (MgCl_2) without chemical modification was investigated.The impedances of the sensor were measured from various relati...An impedance type humidity sensor based on the polyacrylic emulsion containing magnesium chloride (MgCl_2) without chemical modification was investigated.The impedances of the sensor were measured from various relative humidity in the frequency range between 0.1kHz and 100 kHz.The sensor has a good sensitivity from 60%RH to 90%RH.According to the experimental results,the response time is about 240 seconds in the adsorption process and 310 seconds in the desorption process.展开更多
基金Supported by the National Natural Science Foundation of China （20476035, 20846003）.
文摘A fluorine-containing polyacrylate copolymer emulsion was synthesized by a seed emulsion polymerization method, in which methyl methacrylate （MMA） and butyl acrylate （BA） were used as main monomers and hexafluorobutyl methacrylate （HFMA） as fluorine-containing monomer. The structure and properties were characterized by Fourier transform infrared spectrum （FT-IR）, transmission electron microscopy （TEM）, particle size analysis, X-ray photoelectron spectroscopy （XPS）, contact angle （CA）, differential scanning calorimetry （DSC） and thermogravimetry （TG） analysis. The FTIR and TEM results showed that HFMA was effectively involved in the emulsion copolymerization, and the formed emulsion particles had a core-shell structure and a narrow particle size distribution. XPS and CA analysis revealed that a gradient concentration of fluorine existed in the depth profile of fluorine-containing emulsion film which was richer in fluorine and more hydrophobic in one side. DSC and TG analysis also showed that a clear core-shell structure existed in the fluorine-containing emulsion particles, and their film showed higher thermal stability than that of fluorine-free emulsion.
文摘A series of polyacrylate emulsions were blended with tackifier resin emulsions such as modified rosin emulsion, C5 resin and C9 resin emulsion. The miscibility of the polyacrylates and tackifier resins was investigated by means of SEM and visual observation. The phase diagrams of the miscibility change systematically with the polarity of polyacrylates and tackifier resins. The influence of the content of the tackifier resins on the adhesion properties of the; polyacrylate emulsions were also studied. The results show that the 180 degrees C peel strength is improved as the amount of the tackifier resin increases and comes to a maximum at a specific content. The ball tack property decreases slightly and the hold strength changes complicatedly as the tackifier resin increases.
文摘An impedance type humidity sensor based on the polyacrylic emulsion containing magnesium chloride (MgCl_2) without chemical modification was investigated.The impedances of the sensor were measured from various relative humidity in the frequency range between 0.1kHz and 100 kHz.The sensor has a good sensitivity from 60%RH to 90%RH.According to the experimental results,the response time is about 240 seconds in the adsorption process and 310 seconds in the desorption process.
