Synthesis and Characterization of Side-Chain Liquid Crystalline Polysiloxanes

Side chain liquid crystalline golysiloxanes conta ing biphenyl and benzyl ether mesogen were synthesized by the hydrosilation of poly(methylhydrcsiloxane) with 4-(4-allyloxybenzytoxy)-4'- methoxybiphenyl(M_1),4-(4-allyloxybenzyloxy)-4'-ethoxybiphenyl(M_2),4-(4-allyloxybenzyloxy)-4'- propoxybiphenyl(M_3),4-(4-allyloxybenzyloxy)-4'-butoxybiphenyl(M_4),4-(4-allyloxybenzyloxy)-4'- pentyloxybiphenyl(M_5).The phase behavior of monomeric and polymeric liquid crystals was chararcterized by differential scanning calorimetry and optical polarization microscopy.Both the monomeric and polymeric liquid crystals exhibit liquid crystal behaviors.

Syntheses and Characterization of New Chiral Side-Chain Liquid Crystalline Polysiloxanes

A new serial chiral side-chain liquid crystal polysiloxanes containing L-Tyr structures were synthesized at room temperature. Both of them exhibited Sc phase at room temperature.

Two Side Chain β-CD Polysiloxanes Used as New Stationary Phase for Chiral Separation by HRGC

Two new stationary phases : (Ⅰ) [bikis(2,6-di-O-pentyl-3-O-hex-6O-pentyl-3-O-methyl)-β-CD-polysiloxane] and (Ⅱ) [heptkis(2,6-di-O-methyl-3-O-hex-6-enyl)-β-CD-polysiloxane] were synthesized and successfully used for GC separation of chiral isomers.The possess high column efficiency and exhibit fine chiral separation ability.

Mechanical and Thermal Properties of Polysiloxanes and NBR Blend Elastomer

A series of elastomers , based on NBR , polysiloxanes （PS） were prepared and characterized by tensile tests, thermogravimetry （ TG ） and differential scanning calorimetry （ DSC ）. Two kinds of vulcanizing agent, DMDBH （2,5-dimethyl- 2,5-di （ t- butyl perory ） hexane ） and DCP （ dicumylperoxide ） were used to investigate the influence of different vulcanizing agents on properties of PS/ NBR. The addition of PS to NBR was found to improve the thermal stability and decrease the tensile strength of NBR. The tensile strength decreased conshterably while the elongation at break increased obviously with the increase of PS content. The series using DMDBH as vulcanizing agent showed a higher tensile strength and elongation at break than the series using DCP as vulcanizing agent. Simultaneity the thermal stability increased with the increase of PS content.

SYNTHESIS AND CHARACTERIZATION OF PALLADIUM COORDINATING IMINE SIDE CHAIN LIQUID CRYSTALLINE POLYSILOXANES

New thermotropic chloro-bridged dinuclear palladium coordinating imine side chain liquid crystalline polysiloxanes have been synthesized. Their mesomorphic properties have been investigated by DSC, X-ray diffraction and polarizing microscopy. The polymeric complexes show nematicdiscotic (Nd) mesophase. It is found that the temperature range of liquid crystalline state of chloro- bridged polymeric complexes is much wider than that of acetato- bridged ones and imine side chain polysiloxane. This indicates that the disc-like chloro-bridged palladium complexing units play a role as mesogen in mesophase.

SYNTHESIS AND CHARACTERIZATION OF β-DIKETONE BASED SIDE CHAIN LIQUID CRYSTALLINE POLYSILOXANES

A new type of β-diketone based side chain liquid crystalline polysiloxanes (DKLCP) with different length of flexible spacers and end groups have been synthesized by hydrosilation reaction. This is liquid crystal polymers (LCP) using coordinating β-diketone ligand as mesogens. The phase behaviour of DKLCP polymers was studied by differential scanning calorimetry and polarizing microscopy. X-ray diffraction investigations demonstrated that the polysiloxanes with sufficiently long flexible spacers were smectic liquid crystal polymers, while those with much shorter spacers were nematic ones.

SIDE CHAIN LIQUID CRYSTALLINE POLYSILOXANES CONTAINING CROWN ETHER AND BENZYL ETHER MOIETIES

Two kinds of side chain liquid crystalline polysiloxanes containing crown ether and benzyl ether were synthesized and characterized by optical polarization microscopy. Both the monomeric liquid crystals and polymeric liquid crystals show smectic phases.

Synthesis and Characterization of Sidechain Liquid Cryastalline Polysiloxanes Containting Either Cholesteryl or Cyanobiphenyl Mesogenic Groups

A series of side chain liquid crystalline polysiloxanes containing either cholesteryl or cyanobiphenyl mesogenic groups were synthesized by the hydrosilylation reaction of a polysiloxane containing Si H group with a vinyl terminated compound containing the mesogenic group. Their chemical structures were confirmed by IR, 1H NMR, and elemental analysis, Their phase behaviors were investigated by differential scanning calorimetry, optical polarizing microscope, and X ray diffraction techniques. The results show that all these polysiloxanes except PⅤ display smectic or nematic mesonorphism or both. The dependence of phase transition temperature on the rigidity of mesogenic unit. the length of spacer group, and the flexibility of Si(CH 3) 2O chain is also described.

Silica-supported Polysiloxanes with Dithiacrown Ether Groups and Their Platinum Complexes

The present paper represents the syntheses of polypropyloxymethyldithia 15-crown-5 and 18-crown-6 supported on silica and their platinum complexes. The platinum complexes are effective catalysts for the hydrosilylation of olefins with triethoxysilane. The influences of temperature, amount of platinum complexes used and the nature of olefins used on the catalytic activity of the complexes are also investigated in this paper.

Synthesis of Multifunctional Polysiloxanes for Photorefractive Effect

A novel kind of multifunctional polysiloxane containing charge-transporting agent and as electro-optical chromophore has been prepared for photorefractive application. The structural characterization of this kind of polymer is presented by IR spectra and elemental analysis.

SYNTHESIS AND CATALYTIC BEHAVIOR OF POLYSILOXANESUPPORTED FULLERENE PLATINUM OR RHODIUM COMPLEXES

Two polysiloxanes with pendant fullerene moieties and their platinum or rhodium complexes have been prepared from C-60 via amination with omega-decenylamine, followed by hydrosilylation with triethoxysilane and immobilization on fumed silica or by hydrosilylation with methyldichlorosilane and polycondensation with polydimethylsiloxanol, and then by reacting them with potassium chloroplatinite or rhodium chloride in acetone respectively under argon atmosphere. It was found that the four noble metal complexes are effective catalysts for the hydrosilylation of olefins with triethoxysilane. The regioselectivity of platinum complexes for styrene increases remarkably by introducing C-60 moiety. Factors influencing catalytic activity and the mechanism have been investigated.

SYNTHESIS AND CHARACTERIZATION OF SIDE CHAIN LIQUID CRYSTATALLINE POLYSILOXANES CONTAINING BENZYL ETHER LINKING UNITS

Side chain liquid crystalline polysiloxanes containing benzyl ether linkingunits were synthesized by the hydrosilylation of poly (methylhydrosiloxane) with a series of4-(4-alkoxybenzyloxy)-4'-allyloxybiphenyl monomers [4-(4-methoxybenzyloxy )-4'-allyloxy-biphenyl(M_1), 4-(4-ethoxybenzyloxy)-4'-allyloxybiphenyl (M_2), 4-(4-propoxybenzyloxy)-4'-allyloxybiphenyl (M_3), 4-(4-butoxybenzyloxy)-4'-allylox(M_4), 4-(4-pentoxy-benzyloxy)-4'-allyloxybiphenyl (M_5), 4-benzyloxy-4'-allyloxybiphenyl (M_6)]. The phasebehavior of monomeric and polymeric liquid crystals was characterized by differential scan-ning calorimetry and optical polarization microscopy where the groups are ranged frommethoxy to pentoxy Both the monomeric and polymeric liquid crystals exhibit 1iquidcrystal behaviors.

SYNTHESIS AND PROPERTIES OF LIQUID CRYSTAL POLYSILOXANES WITH MESOGENIC STILBENE SIDE GROUPS

A variety of mesomorphic side-chain polysiloxanes were synthesized by using hydrosilylation reaction with dicyclopentadienylplatinum(II) (DPPC) as the catalyst. The mesogenic groups are derivatives of stilbene with cyano or nitro tail groups. The products were characterized by DSC, X-ray diffraction and polarizing optical microscopy (POM). All the polymers were found to have relatively low T-g and can form a smectic liquid crystal phase.

Oxidation, Chain Scission and Cross-Linking Studies of Polysiloxanes upon Ageings

The comparison between physical properties and chemical structures of several polysiloxanes was studied at initial state and upon ageings. Techniques such as densimetry, gel permeation chromatography, FTIR spectroscopy, thermogravim- etric analysis coupled with IR spectroscopy and the new tool photo-DSC were used to give assessments of average mo- lecular weight, chemical evolution, cristallinity and thermal stability. Different types of ageing such as thermal ageing (60?C and 100?C), photo-ageing and acid vapour ageing were performed. After ageing we observed an evolution of chemical structures and physical properties for all samples. The main pathway of degradation is given for each sample. It results in oxidation, chain scission or cross-linking. Cross-linking levels are dependant on the type of ageing, the chemical structure and the initial rate of cristallinity. Cross-linking reactions are favoured after photo-ageing. Oxidation is higher for polysiloxane with aliphatic carbon chain.

Fabrication of UV-Curing Linalool-Polysiloxane Hybrid Films with High Refractive Index and Transparency

In this article,a series of high refractive indices(1.50-1.53)thiol phenyl polysiloxane(TPS)were synthesized via hydrolytic sol-gel reaction.The Fourier transform infrared spectra(FT-IR)and nuclear magnetic resonance spectra(NMR)results showed that TPS conformed to the predicted structures.Natural terpene linalool was exploited as photocrosslinker to fabricate UV-curing linalool-polysiloxane hybrid films(LPH)with TPS via photoinitiated thiol-ene reaction.LPH rapidly cured under UV irradiation at the intensity of 80 mW/cm^(2) in 30 s,exhibiting good UV-curing properties.The optical transmittance of LPH in the wavelength of 300-800 nm was over 90%,exhibiting good optical transparency.The water contact angle and water vapor permeability results showed that the introduction of phenyl groups enhance the hydrophobicity and water vapor barrier properties of LPH.The results indicated the potential of LPHs in the applications of optical functional coatings.

PREPARATION AND CHARACTERIZATION OF WATERBORNE POLYURETHANES MODIFIED WITH BIS(3-(1-METHOXY-2-HYDROXY-PROPOXY)PROPYL) TERMINATED POLYSILOXANES

Polyurethanes（PU） were prepared using toluene diisocyanate,polypropylene glycol,ethylene glycol, dimethylolpropionic acid and triethylamine,and a siloxane modified PU（PSU） was obtained through reaction of the PU prepolymers with bis（3-（1-methoxy-2-hydroxypropoxy）propyl） terminated polysiloxanes（PMTS） of different molecular weight,specifically designed for this purpose.Results showed that,with increases in molecular weight of PMTS and its content,viscosity of the final PSU latexes decreased;phase separation of the incorporated PMTS in PSU films increased;the average particle sizes of the latexes varied between 110 nm and 330 nm,and the surface tension in the final latexes was relatively constant regardless of PMTS amount and its molecular weight.It was likely that copolymerized polysiloxanes had trend to enrich on top of the film when PMTS molecular weight was around 2000 and its content above 5 wt%.In general, PMTS modified polyurethane films showed higher performance than those from unmodified waterborne polyurethane latexes.

Unexpected Strong Luminescence of Polysiloxanes Containing Carbazolyl and C_(60) Moeities as Side Chains

Two types of polysiloxanes, which contain both C 60 moieties and carbazolyl groups in the side chains with a difference in the numbers of the reacting site on C 60 molecules, were synthesized and their fluorescent properties were studied to distinguish the role of C 60 in the luminescent polymers. Our results demonstrated that when C 60 moieties are bonded to the polymers as multisubstituents but not linked to the luminescent moieties directly, the luminescence of the resultant polymers were still very strong instead of quenching, even the substituted degree is only 1 01.

Separation Properties of a New Polysiloxane-Anchored β-Cyclodextrin Derivative as Gas Chromatography Stationary Phase

A new capillary gas chromatography stationary phase, monokis (2,6 di O benzyl 3 O propyl (3’)) hexakis(2,6 di O benzyl 3 O methyl) β CD bonded polysiloxane, was synthesized. It exhibited separation abilities to disubstituted benzene isomers and some chiral solutes. It was also found that the polarity of CD derivatives can be lowered both by chemically bonding it to polysiloxane and by diluting it in polysiloxane. The separation abilities of the polysiloxane anchored CDs (SP CD) are higher than that of the unbonded CDs (S CD) and the diluted S CD at lower column temperature. Hydrosilylation reaction is one of the best methods to lower the operating temperature of CDs.

Synthesis of poly[methyl(3,3,3-trifluoropropyl)siloxane]-b-poly(ethylene oxide) block copolymers

A series of new amphiphilic poly[methyl（3,3,3-trifluoropropyl）siloxane]-b-poly（ethylene oxide） （PMTFPS-b-PEO） diblock copolymers with different ratios of hydrophobic segment to hydrophilic segment were prepared by coupling reactions of end-functlonal PMTFPS and PEO homopolymers. Copolymers were shown to be well defined and narrow molecular weight distribution （MWD） （1.07-1.3） by characterizations such as gel permeation chromatography （GPC） and ^1H-nudear magnetic resonance （^1H-NMR）.

Studies on the Syntheses and Properties of UV-sensitive Organosilicon Monomers and Polymers

Photosensitive organosilicon monomers and polymers containing furylacrylate, cinnamate or methacrylate groups were synthesized. The chemical structure of these organosilicon monomers were confirmed by 1H NMR and elemental analysis.The curing rates of these photosensitive polysiloxanes were also determined, all of them show a good UV-sensitivity. The UV-sensitivity of polysiloxanes containing pendent furylacrylates are comparable to that of polysiloxanes with either pendent cinnamate or pendent methacrylate groups.