A Polyvinyl Alcohol/Acrylamide Hydrogel with Enhanced Mechanical Properties Promotes Full-Thickness Skin Defect Healing by Regulating Immunomodulation and Angiogenesis Through Paracrine Secretion

Hydrogel-based tissue-engineered skin has attracted increased attention due to its potential to restore the structural integrity and functionality of skin.However,the mechanical properties of hydrogel scaffolds and natural skin are substantially different.Here,we developed a polyvinyl alcohol(PVA)/acrylamide based interpenetrating network(IPN)hydrogel that was surface modified with polydopamine(PDA)and termed Dopa-gel.The Dopa-gel exhibited mechanical properties similar to native skin tissue and a superior ability to modulate paracrine functions.Furthermore,a tough scaffold with tensile resistance was fabricated using this hydrogel by three-dimensional printing.The results showed that the interpenetration of PVA,alginate,and polyacrylamide networks notably enhanced the mechanical properties of the hydrogel.Surface modification with PDA endowed the hydrogels with increased secretion of immunomodulatory and proangiogenic factors.In an in vivo model,Dopa-gel treatment accelerated wound closure,increased vascularization,and promoted a shift in macrophages from a proinflammatory M1 phenotype to a prohealing and anti-inflammatory M2 phenotype within the wound area.Mechanistically,the focal adhesion kinase(FAK)/extracellular signal-related kinase(ERK)signaling pathway may mediate the promotion of skin defect healing by increasing paracrine secretion via the Dopa-gel.Additionally,proangiogenic factors can be induced through Rho-associated kinase-2(ROCK-2)/vascular endothelial growth factor(VEGF)-mediated paracrine secretion under tensile stress conditions.Taken together,these findings suggest that the multifunctional Dopa-gel,which has good mechanical properties similar to those of native skin tissue and enhanced immunomodulatory and angiogenic properties,is a promising scaffold for skin tissue regeneration.

Effect of Polyvinyl Alcohol in Inner Aqueous Phase on Stability of Millimeter-scale Capsules

The millimeter-scale capsules with controllable morphology,ultra-low permeability and excellent mechanical stability were fabricated by millifluidics.Viscosity of inner phase was adjusted to control the morphology and properties of the capsules.In detail,as the concentration of polyvinyl alcohol(PVA)increased from 0 to 8% in the inner phase of the capsules,the diameter of capsules decreased from 3.33 ± 0.01mm to 2.97 ± 0.01 mm,the shell thickness of capsules decreased from 0.183 ± 0.004 mm to 0.155 ± 0.003 mm.While the capsules had round shape and high sphericity.Notably,the capsules with 2% PVA in the inner phase had remarkably decreased water permeability and good morphological stability.Specifically,the end-time of water losing of the capsules was up to 49 days,while the dehydrated capsules maintained spherical appearance,and crushing force of the capsules was up to 13.73 ± 0.79 N,which ensured stability during processing and transportation.This research provides a new strategy for stable encapsulation of small molecules.

Electrospun polyvinyl alcohol fibres incorporating an antimicrobial gel for enzymatically controlled reactive oxygen species release

Wounds pose a risk to the skin,our body's primary defence against infections.The rise of antibiotic resistance has prompted the development of novel therapies.RO-101^(■)is an antimicrobial gel that delivers therapeutic levels of hydrogen peroxide(H_(2)O_(2)),a reactive oxygen species,directly to the wound bed.In this study,electrospinning was used to incorporate RO-101^(■)into a polyvinyl alcohol(PVA)sub-micron fibrous mesh that can act as a delivery agent,achieve a sustained release profile,and provide a barrier against infection.Adequate incorporation of this gel into sub-micron fibres was confirmed via nuclear magnetic resonance spectroscopy.Furthermore,scanning electron microscopy exhibited smooth and uniform meshes with diameters in the 200-500 nm range.PVA/RO-101 electrospun meshes generated H_(2)O_(2) in concentrations exceeding 1 m M/(g·m L)(1 m M=1 mmol/L)after 24 h,and the role of sterilisation on H_(2)O_(2) release was evaluated.PVA/RO-101meshes exhibited antimicrobial activity against both Gram-positive Staphylococcus aureus(S.aureus)and Gram-negative Pseudomonas aeruginosa(P.aeruginosa)bacteria,achieving viable count reductions of up to 1 log unit CFU/mm^(2)(CFU:colony-forming units).Moreover,these meshes were capable of disrupting biofilm formation,even against multidrug-resistant organisms such as methicillin-resistant S.aureus(MRSA).Furthermore,increasing the RO-101^(■)concentration resulted in higher H_(2)O_(2) production and an enhanced antimicrobial effect,while fibroblast cell viability and proliferation tests showed a concentration-dependent response with high cytocompatibility at low RO-101^(■)concentrations.This study therefore demonstrates the potential of highly absorbent PVA/RO-101 meshes as potential antimicrobial wound dressings.

The Influence of Tartaric Acid in the Silver Nanoparticle Synthesis Using Response Surface Methodology

Silver nanoparticles(AgNPs)synthesized using tartaric acid as a capping agent have a great impact on the reaction kinetics and contribute significantly to the stability of AgNPs.The protective layer formed by tartaric acid is an important factor that protects the silver surface and reduces potential cytotoxicity problems.These attributes are critical for assessing the compatibility of AgNPs with biological systems and making them suitable for drug delivery applications.The aim of this research is to conduct a comprehensive study of the effect of tartaric acid concentration,sonication time and temperature on the formation of silver nanoparticles.Using Response Surface Methodology(RSM)with Face-Centered Central Composite Design(FCCD),the optimization process identifies the most favorable synthesis conditions.UV-Vis spectrum regression analysis shows that AgNPs stabilized with tartaric acid are more stable than AgNPs without tartaric acid.This highlights the increased stability that tartaric acid provides in AgNP ssssynthesis.Particle size distribution analysis showed a multimodal distribution for AgNPs with tartaric acid and showed the smallest size peak with an average size of 20.53 nm.The second peak with increasing intensity shows a dominant average size of 108.8 nm accompanied by one standard deviation of 4.225 nm and a zeta potential of−11.08 mV.In contrast,AgNPs synthesized with polyvinylpyrrolidone(PVP)showed a unimodal particle distribution with an average particle size of 81.62 nm and a zeta potential of−2.96 mV.The more negative zeta potential of AgNP-tartaric acid indicates its increased stability.Evaluation of antibacterial activity showed that AgNPs stabilized with tartaric acid showed better performance against E.coli and B.subtilis bacteria compared with AgNPs-PVP.In summary,this study highlights the potential of tartaric acid in AgNP synthesis and suggests an avenue for the development of stable AgNPs with versatile applications.

Performance Analysis of Plant Shells/PVC Composites under Corrosion and Aging Conditions

To make full use of plant shellfibers(rice husk,walnut shell,chestnut shell),three kinds of wood-plastic com-posites of plant shellfibers and polyvinyl chloride(PVC)were prepared.X-ray diffraction analysis was carried out on three kinds of plant shellfibers to test their crystallinity.The aging process of the composites was conducted under 2 different conditions.One was artificial seawater immersion and xenon lamp irradiation,and the other one was deionized water spray and xenon lamp irradiation.The mechanical properties(tensile strength,flexural strength,impact strength),changes in color,water absorption,Fourier transform infrared spectroscopy(FTIR),and microstructures of the composites before and after the two aging experiments were analyzed.The results showed that the chestnut shell had the highest crystallinity,which was 42%.The chestnut shell/PVC composites had the strongest interface bonding,the least internal defects,and the best general mechanical properties among the three composites.Its tensile strength,bending strength and impact strength were 23.81 MPa,34.12 MPa,and 4.32 KJ·m^(-2),respectively.Comparing the two aging conditions,artificial seawater immersion and xenon lamp irradiation destroyed the quality of the combination of plant shellfibers and PVC,making the internal defects of the composites increase.This made the water absorption ability and changes in the color of the composites more obvious and led to a great decrease in the mechanical properties.The general mechanical properties of the chestnut shell/PVC composites were the best,but their water absorption ability changed more obviously.

Synthesis and Characterization of Phenyl Camellia oleifera Seed Oil Ester Plasticizing PVC

Plasticizers are essential additives in the processing of polyvinyl chloride(PVC),with phthalate plasticizers being widely used.However,these conventional plasticizers have been shown to be harmful to human health and environmentally unfriendly,necessitating the exploration of eco-friendly bio-based alternatives.In this study,Camellia oleifera seed oil,a specialty resource in China,was utilized as a raw material and reacted with 4,4′-Methylenebis(N,N-diglycidylaniline)(AG-80)to synthesize Phenyl Camellia seed Oil Ester(PCSOE).PCSOE was employed as a plasticizer to prepare modified PVC films with varying concentrations,with the conventional plasticizer dioctyl phthalate(DOP)serving as a control.Experimental results demonstrate that PSCOE-plasticized PVC films exhibit enhanced hydrophilicity,tensile strength,and thermal stability compared to DOP-modified PVC films.The contact angle of PSCOE-plasticized PVC films ranges from 66.26°to 78.48°,which is generally lower than the contact angle of DOP-modified PVC films at 78.40°,indicating improved hydrophilicity due to the modification with PCSOE.The tensile strength of PSCOE-plasticized PVC films ranges from 17.73 to 20.17 MPa,all surpassing the value of 16.41 MPa for DOP-modified PVC films.Moreover,the temperatures corresponding to 5%,10%,and 50%weight loss for PVC samples modified with PCSOE are higher than those for DOP.Hence,PCSOE presents a viable alternative to DOP as a plasticizer for PVC materials.

Polyvinyl Acetate and Vinyl Acetate-Ethylene Hybrid Adhesive: Synthesis, Characterization, and Properties

The goal is to develop a hybrid IPN network of polyvinyl acetate (PVAc) and ethylene-vinyl acetate (VAE). In this research work, the vinyl acetate (VAc)/ VAE hybrid emulsion and polyvinyl acetate emulsion (PVAc) were effectively synthesized. Emulsions with various characteristics have been developed by adjusting the weight ratios between the vinyl acetate monomer and the VAE component. The impacts on the mechanical, thermal, and physical properties of the films were investigated using tests for pencil hardness, tensile shear strength, pH, contact angle measurement, differential scanning calorimetry (DSC), and viscosity. When 5.0 weight percent VAE was added, the tensile shear strength in dry conditions decreased by 18.75% after a 24-hour bonding period, the heat resistance decreased by 26.29% (as per WATT 91) and the tensile shear strength decreased by approximately 36.52% in wet conditions (per EN 204). The pristine sample’s results were also confirmed by the contact angle test. The interpenetrating network (IPN) formation in hybrid PVAc emulsion as primary bonds does not directly attach to PVAc and VAE chains. The addition of VAE reduced the mechanical properties (at dry conditions) and heat resistance as per WATT 91. Contact angle analysis demonstrated that PVAc adhesives containing VAE had increased water resistance when compared to conventional PVA stabilised PVAc homopolymer-based adhesives. When compared to virgin PVAc Homo, the water resistance of the PVAc emulsion polymerization was enhanced by the addition of VAE.

Preparation and Performance Study of PVA-Based Flexible Sensors

Flexible sensors have great potential for monitoring human body motion signals. This paper presents a flexible sensor that uses zinc oxide (ZnO) to improve the mechanical properties and electrical conductivity of PVA hydrogel. The composite hydrogel has excellent conductive properties and high strain sensitivity, making it suitable for motion monitoring. The PVA/ZnO conductive hydrogel is tested on various body parts, showing effective feedback on movement changes and good electrical signal output effects for different motion degrees, confirming its feasibility in flexible sensors. The sensor exhibits good mechanical properties, electrical conductivity, and tensile strain sensing performance, making it a promising sensor material. It can accurately monitor wrist bending, finger deformation, bending, and large-scale joint movements due to its wide monitoring range and recoverable strain. The results show that the PVA/ZnO conductive hydrogel can provide effective feedback in flexible sensors, which is suitable for use in motion monitoring.

Preparation for Polyvinyl Alcohol Hollow Microsphere and Its Sustained Release Effect on Urea

[Objective] The aim of this study was to discuss the optimizing preparation conditions of polyvinyl alcohol(PVA)hollow microsphere and its application in the production of slow-release urea fertilizer.[Method]PVA hollow microsphere was prepared by the emulsion chemical cross-linking method,while its composition,morphology and particle size was analyzed by technologies of FT-IR,SEM and TEM respectively.Thus,factors such as rate of emulsified speed,crosslink temperature and linking agent amount with effects on morphology and particle size of hollow microsphere were also discussed in this study.Furthermore,based on the optimizing preparation conditions,PVA fertilizer carrier microsphere was prepared by coating urea to investigate its sustained release effect on urea.[Result]The optimizing preparation conditions of polyvinyl alcohol(PVA)hollow microsphere were as follows:rate of emulsified speed 6 000 r/min,crosslink temperature 35 ℃ and linking agent amount 25 ml.PVA fertilizer carrier microsphere had significant sustained release effect on urea,and the optimal cross-linking time was 3 hours.[Conclusion]This study provides theoretical basis for the development of new slow-release fertilizer.

生物活性人工肝的研制及其进展

生物活性人工肝的研制及其进展南开大学分子生物学研究所石强，俞耀庭生物活性人工肝（ＢｉｏａｒｔｉｆｉｃｉａｌＬｉｖｅｒ）是将机体肝细胞经过固定化或包埋后构建的体外循环装置，它对失去肝脏机能的个体通过血液透析或灌流以结合、转化和清除机体毒性代谢产物，以致...

Synthesis and characterization of colored layered double hydroxides for thermal stabilizer

Colored layered double hydroxides （LDHs） can be synthesized by introducing colored cations such as Fe^3＋ and Cr^3 ＋, which call be used as thermal stabilizers for polyvinyl chloride （PVC）. The yellowish Mg/Fe and bluish Mg/Cr LDHs are prepared by the co-precipitation method. The results show that the MgsCr_ CO3 and Mg3Fe_ CO3 colored layered double hydroxides can stabilize PVC for more than 30 min under the thermal aging temperature of 180 ℃. The preparation can use cheap Mg（OH） 2 instead of MgCl2, which produces a much smaller amount of the by-product NH4Cl. It is known that NH4Cl is a cheap fertilizer that is difficult to sell; therefore, the preparation is much greener and more economic than the one using magnesium salt.

Immobilization of activated sludge using improved polyvinyl alcohol (PVA) gel

The microbial immobilization method using polyvinyl alcohol （PVA） gel as an immobilizing material was improved and used for entrapment of activated sludge. The oxygen uptake rate （OUR） was used to characterize the biological activity of immobilized activated sludge. Three kinds of PVA-immobilized particles of activated sludge, that is, PVA-boric acid beads, PVA-sodium nitrate beads and PVA-orthophosphate beads were prepared, and their biological activity was compared by measuring the OUR value. The bioactivity of both autotrophic and heterotrophic microorganisms of activated sludge was determined using different synthetic wastewater media （containing 250 mg/L COD and 25 mg/L NH4^＋ -N）. The experimental results showed that the bioactivity and stability of the three kinds of immobilized activated sludge was greatly improved after activation. With respect of the bioactivity and the mechanical stability, the PVA-orthophosphate method may be a promising and economical technique for microbial immobilization.

Hydrogen generation from polyvinyl alcohol-contaminated wastewater by a process of supercritical water gasification

Gasification of polyvinyl alcohol （PVA）-contaminated wastewater in supercritical water （SCW） was investigated in a continuous flow reactor at 723-873 K, 20-36 MPa and residence time of 20-450 s. The gas and liquid products were analyzed by GC/TCD, and TOC analyzer. The main gas products were H2, CH4, CO and CO2. Pressure change had no significant influence on gasification efficiency. Higher temperature and longer residence time enhanced gasification efficiency, and lower temperature favored the production of H2. The effects of KOH catalyst on gas product composition were studied, and gasification efficiency were analyzed. The TOC removal efficiency （RTOC）, carbon gasification ratio （RCG） and hydrogen gasification ratio （RHG） were up to 96.00%, 95.92% and 126.40% at 873 K and 60 s, respectively, which suggests PVA can be completely gasified in SCW. The results indicate supercritical water gasification for hydrogen generation is a promising process for the treatment ofPVA wastewater.

Thermal conductivity model of filled polymer composites

Theoretical and empirical models for predicting the thermal conductivity of polymer composites were summarized since the 1920s.The effects of particle shape,filler amount,dispersion state of fillers,and interfacial thermal barrier on the thermal conductivity of filled polymer composites were investigated,and the agreement of experimental data with theoretical models in literatures was discussed.Silica with high thermal conductivity was chosen to mix with polyvinyl-acetate （EVA） copolymer to prepare SiO2/EVA co-films.Experimental data of the co-films＇ thermal conductivity were compared with some classical theoretical and empirical models.The results show that Agari＇s model,the mixed model,and the percolation model can predict well the thermal conductivity of SiO2/EVA co-films.

Copper biosorption on immobilized seaweed biomass:Column breakthrough characteristics

The biosorption of copper by the brown seaweed Sargassum baccularia, immobilized onto polyvinyl alcohol （PVA） gel beads, was investigated with fixed-bed experiments. Laboratory-scale column tests were performed to determine breakthrough curves with varying flow rates and feed concentrations. A theoretical fixed-bed model, known as the Bohart-Adams equation, was evaluated in simulating the experimental breakthrough curves. The Bohart-Adams model qualitatively predicted the breakthrough trends. PVA- immobilized seaweed biomass beads were amenable to efficient regeneration with aqueous solution containing the chelating agent ethylenediaminetetraacetic acid （EDTA）. The biosorbent retained most of its original uptake capacity over three cycles of use. The excellent reusability of the biosorbent could lead to the development of a viable metal remediation technology.

Fabrication and Characterization of One Interpenetrating Network Hydrogel Based on Sodium Alginate and Polyvinyl Alcohol

One interpenetrating network hydrogel based on sodium alginate (SA) and polyvinyl alcohol (PVA) was synthesized by combining the raw materials of PVA and SA with the double physical crosslinking methods of freezing thawing and Ca2+ crosslinking. The PVA-SA composite hydrogel have been characterized by scanning electron microscopy for surface morphology, infrared spectroscopy for investigating the chemical interactions between PVA and SA, X-ray diffraction for studying the PVA-SA composite structure property and thermal gravimetric for understanding the PVA-SA composite thermal stability. The swelling behavior and the degradation rate of the PVA-SA composite hydrogel were studied in simulated gastrointestinal fluid. Using bovine serum albumin (BSA) and salicylic acid as the model drugs, the release behavior of the PVASA composite hydrogel on macromolecular protein drugs and small molecule drug were evaluated. The results showed that the water absorption and degradation ability of the PVA-SA composite hydrogel was much better compared to the pure SA hydrogel or pure PVA hydrogel. The hydrogel exhibited remarkable pH sensitivity and the network was stable in the simulated intestinal fluid for more than 24 h. With the advantages such as mild preparation conditions, simple method, less reagent and none severe reaction, the PVA-SA composite hydrogel is expected to be a new prosperous facile sustained drug delivery carrier.

PREPARATION AND CHARACTERIZATION OF PVA COATED MAGNETIC NANOPARTICLES

Polyvinyl alcohol coated magnetic particles (PVA ferrofluids) have been synthesized by chemical co-precipitation of Fe(II)/Fe(III) salts in 1.5 mol/L NH4OH solution at 70 degreesC in the presence of PVA. The resultant colloidal particles have core-shell structures, in which the iron oxide crystallites form the cores and PVA chains form the shells. The hydrodynamic diameter of the colloidal particles is in the range of 108 to 155 nm, which increases with increasing PVA concentration from 5 wt% to 20 wt%, The size of the magnetic cores is ca. 5-10 nm, which is relatively independent of PVA concentration. Under transmission electron microscopic (TEM) examination, the magnetic cores exhibit somewhat irregular shapes varying from spherical, oval, to cubic. Magnetometry measurement revealed that the PVA coated magnetic particles are superparamagnetic. The saturation magnetization of 5 wt% and 20 wt% PVA ferrofluids at 300 K is 54 and 49 emu/g, respectively. All the PVA ferrofluids exhibited excellent colloidal stability in pure water and phosphate buffer saline (PBS, pH = 7.4). The ferrofluids can remain stable in above solutions for more than three months at 4 degreesC.

Hydrothermal synthesis and photoluminescence behavior of CeO_2 nanowires with the aid of surfactant PVP

Well-crystalline CeO_2 nanowires were prepared via a surfactant-assisted hydrothermal process.Reaction temperature and reaction time were changed for the determination of optimal synthesis parameters.The as-obtained products were characterized by X-ray diffraction （XRD）,high-resolution transmission electron microscopy（HRTEM）,and field emission scanning electron microscopy（FESEM）.The results show that single crystal CeO_2 nanowires with high yield and good uniformity can be obtained hydrothermally at 180℃for 12 h with the aid of 2.0 g surfactant（polyvinyl pyrrolidone,PVP）.The role of PVP was then discussed and a possible growth mechanism was proposed. Moreover,room temperature photoluminescence（PL） spectra were obtained for these CeO2 nanowires,which are believed to be related to the abundant defects in these nanostructures.

PVA/PVP blend polymer matrix for hosting carriers in facilitated transport membranes: Synergistic enhancement of CO2 separation performance

CO2 separation performance in facilitated transport membranes has been reported depended not only on the CO2 carrier properties but also to a great extent on the polymeric matrix regarding the capacity of retaining water and carriers as well as the processability for coating defect-free ultra-thin films. In this study, the blends of hydrophilic polymers polyvinyl pyrrolidone(PVP) and polyvinyl alcohol(PVA) were studied to find an optimal polymer matrix to host carriers in facilitated transport membranes for enhanced CO2 separation. It is found out that the optimized blend is 50/50 PVA/PVP by weight, which shows a significant increase in the water uptake(from 63 to 84%) at equilibrium state compared to the neat PVA. Polyethyleneimine(PEI) was employed to provide sample carriers to evaluate the synergistic effect of PVA and PVP on the CO2 separation performance. A thin film composite(TFC) membrane of the optimized blend(50/50 PVA/PVP with 50 wt% PEI) was fabricated on polysulfone(PSf) porous support. The fabrication of the TFC membranes is simple and low cost, and CO2 permeance of the optimized blend membrane is nearly doubled with the CO2/N2 selectivity remained unchanged, showing great potential for industrial applications of the resulted membranes.

Strength performance of mortise and loose-tenon furniture joints under uniaxial bending moment

We determined the effects of adhesive type and loose tenon dimensions （length and thickness） on bending strength of T-shaped mor- tise and loose-tenon joints. Polyvinyl acetate （PVAc） and two-component polyurethane （PU） adhesives were used to construct joint specimens. The bending moment capacity of joints increased significantly with increased length and thickness of the loose tenon. Bending moment capacity of joints constructed with PU adhesive was approximately 13% higher than for joints constructed with PVAc adhesive. We developed a predictive equation as a function of adhesive type and loose tenon dimensions to estimate the strength of the joints constructed of oriental beech （Fagus orientalis L.） under uniaxial bending load.