The variation of tensile strength parallel to grain in Chinese fir and 1-214 poplar wood from plantations was studied in this paper. Aaccording to the national standards The Testing Methods for Physical and Mechanical...The variation of tensile strength parallel to grain in Chinese fir and 1-214 poplar wood from plantations was studied in this paper. Aaccording to the national standards The Testing Methods for Physical and Mechanical Properties of Wood （GB 1927 to 1943 -- 1991）, the small clear wood samples were cut and tested, which represent the south and north of trees with heights of 1.3, 3.3, 5.3 and 7.3 m. The results showed： the tensile strength parallel to grain of the north wood was higher than that of south wood. ANOVA shows that the tensile strength parallel to the grain with height is of significant difference （at 0.05 level）.展开更多
The visible and near infrared(NIR)(350-2500 nm)spectra and the MOE of 438 small clear wood samples from Chinese fir,eucalyptus and poplar 72 were measured.Using partial least-square(PLS)modeling,the NIR spectra could ...The visible and near infrared(NIR)(350-2500 nm)spectra and the MOE of 438 small clear wood samples from Chinese fir,eucalyptus and poplar 72 were measured.Using partial least-square(PLS)modeling,the NIR spectra could be used to predict MOE and MOR of the clear-wood samples from Chinese fir and eucalyptus solid wood.NIR spectra could only be used to predict MOE but not MOR of poplar clear-wood samples.With the exception of MOR of poplar clear-wood samples,the correlations between NIR and the mechanical properties are very strong,and the calibration and test correlation coefficients are both above 0.80.展开更多
基金This work was supported by State Science and Technology Infrastructure Platform Projects (2004DEA70900).
文摘The variation of tensile strength parallel to grain in Chinese fir and 1-214 poplar wood from plantations was studied in this paper. Aaccording to the national standards The Testing Methods for Physical and Mechanical Properties of Wood （GB 1927 to 1943 -- 1991）, the small clear wood samples were cut and tested, which represent the south and north of trees with heights of 1.3, 3.3, 5.3 and 7.3 m. The results showed： the tensile strength parallel to grain of the north wood was higher than that of south wood. ANOVA shows that the tensile strength parallel to the grain with height is of significant difference （at 0.05 level）.
基金The financial support from the'948'project(2002-45,2003-4-27) of State Forestry Administration of China.
文摘The visible and near infrared(NIR)(350-2500 nm)spectra and the MOE of 438 small clear wood samples from Chinese fir,eucalyptus and poplar 72 were measured.Using partial least-square(PLS)modeling,the NIR spectra could be used to predict MOE and MOR of the clear-wood samples from Chinese fir and eucalyptus solid wood.NIR spectra could only be used to predict MOE but not MOR of poplar clear-wood samples.With the exception of MOR of poplar clear-wood samples,the correlations between NIR and the mechanical properties are very strong,and the calibration and test correlation coefficients are both above 0.80.
