Multi-Material Topology Optimization for Spatial-Varying Porous Structures

This paper aims to propose a topology optimization method on generating porous structures comprising multiple materials.The mathematical optimization formulation is established under the constraints of individual volume fraction of constituent phase or total mass,as well as the local volume fraction of all phases.The original optimization problem with numerous constraints is converted into a box-constrained optimization problem by incorporating all constraints to the augmented Lagrangian function,avoiding the parameter dependence in the conventional aggregation process.Furthermore,the local volume percentage can be precisely satisfied.The effects including the globalmass bound,the influence radius and local volume percentage on final designs are exploited through numerical examples.The numerical results also reveal that porous structures keep a balance between the bulk design and periodic design in terms of the resulting compliance.All results,including those for irregular structures andmultiple volume fraction constraints,demonstrate that the proposedmethod can provide an efficient solution for multiple material infill structures.

A novel multi-channel porous structure facilitating mass transport towards highly efficient alkaline water electrolysis

An advantageous porous architecture of electrodes is pivotal in significantly enhancing alkaline water electrolysis(AWE)efficiency by optimizing the mass transport mechanisms.This effect becomes even more pronounced when aiming to achieve elevated current densities.Herein,we employed a rapid and scalable laser texturing process to craft novel multi-channel porous electrodes.Particularly,the obtained electrodes exhibit the lowest Tafel slope of 79 mV dec^(-1)(HER)and 49 mV dec^(-1)(OER).As anticipated,the alkaline electrolyzer(AEL)cell incorporating multi-channel porous electrodes(NP-LT30)exhibited a remarkable improvement in cell efficiency,with voltage drops(from 2.28 to 1.97 V)exceeding 300 mV under 1 A cm^(-1),compared to conventional perforated Ni plate electrodes.This enhancement mainly stemmed from the employed multi-channel porous structure,facilitating mass transport and bubble dynamics through an innovative convection mode,surpassing the traditional convection mode.Furthermore,the NP-LT30-based AEL cell demonstrated exceptional durability for 300 h under 1.0 A cm^(-2).This study underscores the capability of the novel multi-channel porous electrodes to expedite mass transport in practical AWE applications.

Effects of Microporous Structure of Activated Carbon on Adsorption Performance of N-butane

[Objective] The paper was to study the effect of microporous structure of ac- tivated carbon on adsorption performance of n-butane. [Method] Using 8 activated car- bons prepared from different materials and technologies, the effects of physical prop- erties of activated carbon on butane adsorption performance were investigated. [Result] Specific surface area, pore volume and pore size distribution of activated carbon exert- ed remarkable effects on butane adsorption. The activated carbon with high percent- age of micropore volume within the range of 1.2-2 nm possessed high butane activity. The level of butane retentivity rose with the increase of the volume of pore within the range of 0.5-0,9 nm, which led to smaller butan working capacity （BWC）. [Conclusion] The study provided reference for the adsorption research for activated carbon.

Triply periodic minimal surface(TPMS)porous structures:from multi-scale design,precise additive manufacturing to multidisciplinary applications

Inspired by natural porous architectures,numerous attempts have been made to generate porous structures.Owing to the smooth surfaces,highly interconnected porous architectures,and mathematical controllable geometry features,triply periodic minimal surface(TPMS)is emerging as an outstanding solution to constructing porous structures in recent years.However,many advantages of TPMS are not fully utilized in current research.Critical problems of the process from design,manufacturing to applications need further systematic and integrated discussions.In this work,a comprehensive overview of TPMS porous structures is provided.In order to generate the digital models of TPMS,the geometry design algorithms and performance control strategies are introduced according to diverse requirements.Based on that,precise additive manufacturing methods are summarized for fabricating physical TPMS products.Furthermore,actual multidisciplinary applications are presented to clarify the advantages and further potential of TPMS porous structures.Eventually,the existing problems and further research outlooks are discussed.

Nitrogen and sulfur co-doped graphene aerogel with hierarchically porous structure for high-performance supercapacitors

Supercapacitors with unique performance have been widely utilized in many fields. Herein, we report a nitrogen and sulfur co-doped graphene aerogel(N/S-GA-2) prepared using a low toxic precursor for high-performance supercapacitors. The as-obtained material possesses a hierarchically porous structure and a large number of electrochemical active sites. At a current density of 1 Ag^-1, the specific capacitance of the N/S-GA-2 for supercapacitors with the ionic liquid as the electrolyte is 169.4 Fg^-1, and the corresponding energy density is 84.5 Wh kg^-1.At a power density of 8.9 k W kg^-1, the energy density can reach up to 75.7 Wh kg^-1, showing that the N/S-GA-2 has an excellent electrochemical performance. Consequently, the N/S-GA-2 can be used as a promising candidate of electrode materials for supercapacitors with high power density and high energy density.

Porous structures of natural materials and bionic design

This investigation and morphology analysis of porous structure of some kinds of natural materials such as chicken eggshell, partridge eggshell, pig bone, and seeds of mung bean, soja, ginkgo, lotus seed, as well as the epidermis of apples, with SEM (Scanning Electronic Microscope) showed that natural structures’ pores can be classified into uniform pores, gradient pores and multi pores from the viewpoint of the distribution variation of pore density, size and geometry. Furthermore, an optimal design of porous bearings was for the first time developed based on the gradient configuration of natural materials. The bionic design of porous structures is predicted to be widely developed and applied in the fields of materials and mechanical engineering in the future.

Synergy of porous structure and cation doping in Ta3N5 photoanode towards improved photoelectrochemical water oxidation

Herein,a cross-linked porous Ta3N5 film was prepared via a simple solution combustion route followed by a high-temperature nitridation process for photoelectrochemical(PEC) water oxidation.Meanwhile,the metal cations(Mg2+ and Zr4+) were incorporated into the porous Ta3N5 to enhance the PEC performance.The porous Mg/Zr co-doped Ta3N5 photoanode yielded a photocurrent density of 1.40 mA cm^(-2) at 1.23 V vs RHE,which is 5.6 times higher than that of the dense Ta3N5 photoanode.The enhanced performance should be ascribed to the synergistic effect of porous structure and cation doping,which can enlarge the electrochemical active surface area and accelerate the charge transfer by introducing ON substitution defects.Subsequently,Co(OH)2 cocatalyst was loaded on the Mg/Zr-Ta3N5 photoanode to negatively shift the onset potential to 0.45 V vs RHE and further improve the photocurrent density to 3.5 mA cm^(-2)at 1.23 V vs.RHE,with a maximum half-cell solar to hydrogen efficiency of 0.45%.The present study provides a new strategy to design efficient Ta3N5 photoelectrodes via the simultaneous control of the morphology and composition.

Damping of Oblique Ocean Waves by a Vertical Porous Structure Placed on a Multi-step Bottom

Oblique ocean wave damping by a vertical porous structure placed on a multi-step bottom topography is studied with the help of linear water wave theory. Some portion of the oblique wave, incident on the porous structure, gets reflected by the multi-step bottom and the porous structure, and the rest propagates into the water medium following the porous structure. Two cases are considered： first a solid vertical wall placed at a finite distance from the porous structure in the water medium following the porous structure and then a special case of an unbounded water medium following the porous structure. In both cases, boundary value problems are set up in three different media, the first medium being water, the second medium being the porous structure consisting ofp vertical regions-one above each step and the third medium being water again. By using the matching conditions along the virtualvertical boundaries, a system of linear equations is deduced. The behavior of the reflection coefficient and the dimensionless amplitude of the transmitted progressive wave due to different relevant parameters are studied. Energy loss due to the propagation of oblique water wave through the porous structure is also carried out. The effects of various parameters, such as number of evanescent modes, porosity, friction factor, structure width, number of steps and angle of incidence, on the reflection coefficient and the dimensionless amplitude of the transmitted wave are studied graphically for both cases. Number of evanescent modes merely affects the scattering phenomenon. But higher values of porosity show relatively lower reflection than that for lower porosity. Oscillation in the reflection coefficient is observed for lower values of friction factor but it disappears with an increase in the value of friction factor. Amplitude of the transmitted progressive wave is independent of the porosity of the structure. But lower value of friction factor causes higher transmission. The investigation is then carried out for the second case, i.e., when the wall is absent. The significant difference between the two cases considered here is that the reflection due to a thin porous structure is very high when the solid wall exists as compared to the case when no wall is present. Energy loss due to different porosity, friction factor, structure width and angle of incidence is also examined. Validity of our model is ascertained by matching it with an available one.

Dependence of lithium metal battery performances on inherent separator porous structure regulation

Boosting of rechargeable lithium metal batteries(LMBs) holds challenges because of lithium dendrites germination and high-reactive surface feature.Separators may experience structure-determined chemical deterioration and worsen Li plating-stripping behaviors when smoothly shifting from lithium-ion batteries(LIBs) to LMBs.This study precisely regulations the crystal structure of β-polypropylene and separator porous construction to investigate the intrinsic porous structure and mechanical properties determined electrochemical performances and cycling durability of LMBs.Crystal structure characterizations,porous structure analyses,and electrochemical cycling tests uncover appropriate annealing thermal stimulation concentrates β-lamellae thickness and enhances lamellae thermal stability by rearranging molecular chain in inferior β-lamellae,maximally homogenizing biaxial tensile deformation and resultant porous constructions.These even pores with high connectivity lower ion migration barriers,alleviate heterogeneous Li^(+) flux dispersion,stabilize reversible Li plating-stripping behaviors,and hinder coursing and branching of Li dendrites,endowing steady cell cycling durability,especially at higher currents due to the highlighted uncontrollable cumulation of dead Li,which offers new insights for the current pursuit of high-power density battery and fast charging technology.The suggested separator structure-chemical nature functions in ensuring cyclic cell stability and builds reliable relationships between separator structure design and practical LMBs applications.

Boosting ethanol oxidation over nickel oxide through construction of quasi-one-dimensional morphology and hierarchically porous structure

Quasi-one-dimensional NiO with a hierarchically porous structure was synthesized through a facile coordination−precipitation method with the coupling effect of ammonia and a post-calcination treatment.The electrocatalytic properties of NiO fibers for the oxidation of ethanol were compared with those of NiO spheres.The results show that the fibrous NiO possesses a larger specific surface area of 140.153 m2/g and a lower electrical resistivity of 4.5×105Ω·m,leading to an impressively superior electrocatalytic activity to spherical NiO for ethanol oxidation in alkaline media.The current decay on fibrous NiO at 0.6 V in 100−900 s was 0.00003%,which is much lower than that of spherical NiO,indicating its better stability.The unique morphology and hierarchically porous structure give the fibrous NiO great potential to be used as an anodic electrocatalyst for direct ethanol fuel cells.

Influence of Successive Washing on Porous Structure of Pseudoboehmite

The effect of successive washing instead of traditional intermittent washing on the porous structure of pseudoboehmite was investigated by mercury porosimetry, N2 adsorption and thermal analysis, while the stabilities of different types of crystals were investigated by X-ray diffractometer. Experimental results show that successive washing is a continuation of the aging process of intermittent washing. After a successive washing, the pore types showed no difference with the intermittent washing. During successive washing, the characteristics of the pores in the range of 2-15 nm changed only very little. However, the distributions of the pore radius for pores of 20-50 and 300-1000 nm were obviously influenced. It was shown that the volume of larger pores decreased only to a smaller extent after the successive washing, as compared with that of the intermittent washing, and the pore size was affected by the condition of the successive washing. The roles of physisorbed water, intermicellar liquid, weakly bonded water, as well as the role of stirring, have been discussed.

Periodic Lattice Porous Structure Produced by Selective Laser Melting:Process,Experiment and Numerical Simulation Analysis

To accurately perform the coupled simulation of temperature field and stress field of complex parts and porous structures under the optimal manufacturing process parameters,three kinds of porous structures with different complexity were designed in this paper.Firstly,ANSYS additive software was used to conduct the stress/deformation simulation of the whole structure under different scanning strategies.Secondly,the optimal scanning strategy for different porous structures was determined,then the experimental preparation was performed,and mechanical properties of compression were tested and studied.The results show that the elastic modulus and yield strength increase with the increase of pole diameter/wall thickness.In addition,the quasi-static compression simulation of different structures was performed,and the compression performance was analyzed based on the experimental data.Finally,the stress concentration region of different structures was obtained.

Effect of TiO_2 Sol Impregnation on Biogenic Hierarchical Porous Structure of Rice Husk after High Temperature Treatment

Biogenic hierarchical porous rice husk SiO2 samples were prepared from pre-treating rice husk （RH） at low temperatures following TiO2 sol impregnation and pyrolysis process.The samples were characterized by scanning electron microscopy,X-ray diffraction and energy dispersive spectrometer.Biogenic hierarchical porous structure of untreated RH SiO2 starts to crack and break down from 800 ℃,whereas TiO2 grain film is formed on the pore wall and surface of RH SiO2 after sol impregnation and heat treatment,which enhances the skeleton strength ; the biogenic hierarchical porous structure of the rice husk still maintains after firing at 1 400 ℃.

Evaluation of Porous Structure of Cement Pastes Made with Residual Rice Husk Ash

In several countries, the residual RHA （rice husk ash） has been produced in rice processing industries or in thermoelectric plants that use rice husk to generate heat and/or electrical energy, usually without burning process control. This causes a reduction in the amorphous silica content of residual RHA, which distinguishes them from the RHA produced according to controlled burning process, which is totally amorphous and considered a highly reactive pozzolan. In this paper, the hydration products and the porous structure of binders paste were studied by replacing, in weight of 5%, 10% and 20% of Portland cement OPC （ordinary Portland cement）, by residual RHAs named A and B, which have high and low content of amorphous silica, respectively, using microstructure evaluation techniques as XRD （X-ray diffraction）, TG （thermogravimetric） tests and MIP （mercury intrusion porosimetry）. A reducing the size of the pores of the pastes was observed according to the increase of content replacement of RHA A and RHA B.

Nano-Au-decorated hierarchical porous cobalt sulfide derived from ZIF-67 toward optimized oxygen evolution catalysis:Important roles of microstructures and electronic modulation

Enhancing both the number of active sites available and the intrinsic activity of Co-based electrocatalysts simultaneously is a desirable goal.Herein,a ZIF-67-derived hierarchical porous cobalt sulfide decorated by Au nanoparticles(NPs)(denoted as HP-Au@CoxSy@ZIF-67)hybrid is synthesized by low-temperature sulfuration treatment.The well-defined macroporous-mesoporous-microporous structure is obtained based on the combination of polystyrene spheres,as-formed CoxSy nanosheets,and ZIF-67 frameworks.This novel three-dimensional hierarchical structure significantly enlarges the three-phase interfaces,accelerating the mass transfer and exposing the active centers for oxygen evolution reaction.The electronic structure of Co is modulated by Au through charge transfer,and a series of experiments,together with theoretical analysis,is performed to ascertain the electronic modulation of Co by Au.Meanwhile,HP-Au@CoxSy@ZIF-67 catalysts with different amounts of Au were synthesized,wherein Au and NaBH4 reductant result in an interesting“competition effect”to regulate the relative ratio of Co^(2+)/Co^(3+),and moderate Au assists the electrochemical performance to reach the highest value.Consequently,the optimized HP-Au@CoxSy@ZIF-67 exhibits a low overpotential of 340 mV at 10 mA cm^(-2)and a Tafel slope of 42 mV dec-1 for OER in 0.1 M aqueous KOH,enabling efficient water splitting and Zn-air battery performance.The work here highlights the pivotal roles of both microstructural and electronic modulation in enhancing electrocatalytic activity and presents a feasible strategy for designing and optimizing advanced electrocatalysts.

Designing High-Porosity Porous Structures with Complex Geometries for Enhanced Thermal Conductivity Using Selective Laser Melting and Heat Treatment

Rapid advancements in the aerospace industry necessitate the development of unified,lightweight and thermally conductive structures.Integrating complex geometries,including bionic and porous structures,is paramount in thermally conductive structures to attain improved thermal conductivity.The design of two high-porosity porous lattice structures was inspired by pomelo peel structure,using Voronoi parametric design.By combining characteristic elements of two high-porostructuressity porous lattice structures designed,a novel high-porosity porous gradient structure is created.This structure is based on gradient design.Utilizing selective laser melting(SLM),fabrication comprises three.Steady-state thermal characteristics are evaluated via finite element analysis(FEA).The experimental thermal conductivity measurements correlate well with simulation results,validating the sequence of K_L as the highest,followed by D_K_L and then D_L.Heat treatment significantly improves thermal conductivity,enhancing the base material by about 45.6%and porous structured samples by approximately 43.7%.

Solid-phase sintering process and forced convective heat transfer performance of porous-structured micro-channels

A solid-phase sintering process for the low-cost fabrication of composite micro-channels was developed. Three kinds of composite micro-channels with metallic porous structures were designed. The sintering process was studied and optimized to obtain porous-structured micro-channels with high porosity. The flow resistance and heat transfer performance in the composite micro-channels were investigated. The composite micro-channels show acceptable flow resistance, significant enhancement of heat transfer and dramatic improvement of flow boiling stability, which indicates a promising prospect for the application in forced convective heat transfer.

Au-decorated porous structure graphene with enhanced sensing performance for low-concentration NO2 detection

A recent progress in new emerging two-dimensional(2 D)materials has provided promising opportunity for gas sensing in ultra-low detectable concentration.In this work,we have demonstrated a flexible NO2 gas sensor with porous structure graphene on polyethylene terephthalate substrates operating at room temperature.The gas sensor exhibited good performance with response of 1.2%and a fast response time within 30 s after exposure to50×10^-9 NO2 gas.As porous structure of graphene increased the surface area,the sensor showed high sensitivity of ppb level for NO2 detection.Au nanoparticles were decorated on the surface of the porous structure graphene skeleton,resulting in an incensement of response compared with pristine graphene.Au nanoparticles-decorated graphene exhibits not only better sensitivity(1.5-1.6 times larger than pristine graphene)for NO2 gas detection,but also fast response.The sensor was found to be robust and sensitive under the cycling bending test,which could also be ascribed to the merits of graphene.This porous structure graphene-based gas sensor is expected to enable a simple and inexpensive flexible gas sensing platform.

A Novel Hierarchical Porous 3D Structured Vanadium Nitride/Carbon Membranes for High-performance Supercapacitor Negative Electrodes

Transition-metal nitrides exhibit wide potential windows and good electrochemical performance, but usually experience imbalanced practical applications in the energy storage field due to aggregation, poor circulation stability, and complicated syntheses. In this study, a novel and simple multiphase polymeric strategy was developed to fabricate hybrid vanadium nitride/carbon(VN/C) membranes for supercapacitor negative electrodes, in which VN nanoparticles were uniformly distributed in the hierarchical porous carbon 3D networks. The supercapacitor negative electrode based on VN/C membranes exhibited a high specific capacitance of 392.0 F g^(-1) at 0.5 A g^(-1) and an excellent rate capability with capacitance retention of 50.5% at 30 A g^(-1). For the asymmetric device fabricated using Ni(OH)_2//VN/C membranes, a high energy density of 43.0 Wh kg^(-1) at a power density of800 W kg^(-1) was observed. Moreover, the device also showed good cycling stability of 82.9% at a current density of 1.0 A g^(-1) after 8000 cycles. This work may throw a light on simply the fabrication of other high-performance transition-metal nitridebased supercapacitor or other energy storage devices.

Forced Convection Heat Transfer in Porous Structure: Effect of Morphology on Pressure Drop and Heat Transfer Coefficient

A light-weight structure with sufficient mechanical strength and heat transfer performance is increasingly required for some thermal management issues.The porous structure with the skeleton supporting the ambient stress and the pores holding the flowing fluid is considered very promising,attracting significant scientific and industrial interest over the past few decades.However,due to complicated morphology of the porous matrices and thereby various performance of the pressure drop and heat transfer coefficients (HTC),the comprehensive comparison and evaluation between different structures are largely unclear.In this work,recent researches on the efforts of forced convection heat transfer in light-weight porous structure are reviewed;special interest is placed in the open-cell foam,lattice-frame,structured packed bed,and wire-woven structures.Their experimental apparatus,morphological of the porous structures,effect of morphology on pressure drop and HTC,and further applications are discussed.The new method which measure morphology accurately should be paid more attention to develop more accuracy correlation.Also,the most research focused on low Reynolds number and existing structure,while very few researchers investigated the property of forced convection heat transfer in high velocity region and developed new porous structure.