The advent of three-dimensional (3-D) printed technique provides great possibility in the fabrication of customized porous titanium (Ti) implant. However, the bioinert property of the printed Ti poses an out- stan...The advent of three-dimensional (3-D) printed technique provides great possibility in the fabrication of customized porous titanium (Ti) implant. However, the bioinert property of the printed Ti poses an out- standing problem. Hybrid micro-arc oxidation and hydrothermal (MAO-HT) treatment on porous metals is able to produce multi-scaled hierarchical orthopedic implant, showing great potential for surface mod- ification of 3-D printed implant. In this study, cylindrical porous Ti6Al4V (Ti64) scaffolds with pore size of 640 lure, porosity of ?3% were 3-D printed by electron beam melting process, and their surfaces were left untreated or treated by a combined MAO-HT procedure. In vitro bioactivity was tested by immer- sion in simulated body fluid for different time points. Then, 12 scaffolds in each group were implanted into the femoral condyles of New Zealand rabbit for 8 weeks. Osseointegration was evaluated by qual- itative and quantitative histological analysis, and the bone ingrowth features were probed by sequential fluorescent labeling at 3 and 6 weeks post-surgery, Following the MAO-HT treatment, the porous Ti64 scaffold was endowed with multi-scaled micro/nano-topographies and high amounts of CaP on its surface. The treated scaffold exhibited drastically enhanced apatite forming ability compared with the un- treated one. In vivo test revealed significantly that a higher amount of bone ingrowth and bone implant contact at the treated scaffold. The 2 types of scaffolds had different patterns of bone ingrowth; the treated scaffold exhibited a pattern of contact osteogenesis, by which bone formed directly on the treated implant surface, whereas bone formed distal to the implant surface of the untreated scaffold. MAO-HT treat- ment can significantly enhance the in vitro apatite-inducing ability and in vivo osseointegration capacity of 3-D porous Ti64 scaffold and may provide as a viable approach for the fabrication of bioactive 3-D printed porous implant for orthopedic applications.展开更多
The insufficient osteogenesis and osseointegration of porous titanium based scaffold limit its further application.Early angiogenesis is important for scaffold survival.It is necessary to develop a multifunctional sur...The insufficient osteogenesis and osseointegration of porous titanium based scaffold limit its further application.Early angiogenesis is important for scaffold survival.It is necessary to develop a multifunctional surface on titanium scaffold with both osteogenic and angiogenic properties.In this study,a biofunctional magnesium coating is deposited on porous Ti6Al4V scaffold.For osseointegration and osteogenesis analysis,in vitro studies reveal that magnesium-coated Ti6Al4V co-culture with MC3T3-E1 cells can improve cell proliferation,adhesion,extracellular matrix(ECM)mineralization and ALP activity compared with bare Ti6Al4V cocultivation.Additionally,MC3T3-E1 cells cultured with magnesium-coated Ti6Al4V show significantly higher osteogenesisrelated genes expression.In vivo studies including fluorochrome labeling,micro-computerized tomography and histological examination of magnesium-coated Ti6Al4V scaffold reveal that new bone regeneration is significantly increased in rabbits after implantation.For angiogenesis studies,magnesium-coated Ti6Al4V improve HUVECs proliferation,adhesion,tube formation,wound-healing and Transwell abilities.HUVECs cultured with magnesium-coated Ti6Al4V display significantly higher angiogenesis-related genes(HIF-1αand VEGF)expression.Microangiography analysis reveal that magnesium-coated Ti6Al4V scaffold can significantly enhance the blood vessel formation.This study enlarges the application scope of magnesium and provides an optional choice to the conventional porous Ti6Al4V scaffold with enhanced osteogenesis and angiogenesis for further orthopedic applications.展开更多
For large segmental bone defects,porous titanium scaffolds have some advantages,however,they lack electrical activity which hinders their further use.In this study,a barium titanate(BaTiO3)piezoelectric ceramic was us...For large segmental bone defects,porous titanium scaffolds have some advantages,however,they lack electrical activity which hinders their further use.In this study,a barium titanate(BaTiO3)piezoelectric ceramic was used to modify the surface of a porous Ti6Al4V scaffold(pTi),which was characterized by scanning electron microscopy,energy dispersive spectroscopy,X-ray photoelectron spectroscopy,and roughness and water contact angle analyses.Low intensity pulsed ultrasound(LIPUS)was applied in vitro and in vivo study.The activity of bone marrow mesenchymal stem cells,including adhesion,proliferation,and gene expression,was significantly superior in the BaTiO3/pTi,pTi+LIPUS,and BaTiO3/pTi+LIPUS groups than in the pTi group.The activity was also higher in the BaTiO3/pTi+LIPUS group than in the BaTiO3/pTi and pTi+LIPUS groups.Additionally,micro-computed tomography,the mineral apposition rate,histomorphology,and the peak pull-out load showed that these scaffold conditions significantly enhanced osteogenesis and osseointegration 6 and 12 weeks after implantation in large segmental bone defects in the radius of rabbits compared with those resulting from the pTi condition.Consequently,the improved osteogenesis and osseointegration make the BaTiO3/pTi+LIPUS a promising method to promote bone regeneration in large segmental bone defects for clinical application.展开更多
基金the Beijing AKEC Medical Co.,LtdMedical Research Center of Peking University Third Hospitalsupported by the Project of Scientific and Technical Plan of Beijing(Nos.Z121100005312005 and Z141100002814008)
文摘The advent of three-dimensional (3-D) printed technique provides great possibility in the fabrication of customized porous titanium (Ti) implant. However, the bioinert property of the printed Ti poses an out- standing problem. Hybrid micro-arc oxidation and hydrothermal (MAO-HT) treatment on porous metals is able to produce multi-scaled hierarchical orthopedic implant, showing great potential for surface mod- ification of 3-D printed implant. In this study, cylindrical porous Ti6Al4V (Ti64) scaffolds with pore size of 640 lure, porosity of ?3% were 3-D printed by electron beam melting process, and their surfaces were left untreated or treated by a combined MAO-HT procedure. In vitro bioactivity was tested by immer- sion in simulated body fluid for different time points. Then, 12 scaffolds in each group were implanted into the femoral condyles of New Zealand rabbit for 8 weeks. Osseointegration was evaluated by qual- itative and quantitative histological analysis, and the bone ingrowth features were probed by sequential fluorescent labeling at 3 and 6 weeks post-surgery, Following the MAO-HT treatment, the porous Ti64 scaffold was endowed with multi-scaled micro/nano-topographies and high amounts of CaP on its surface. The treated scaffold exhibited drastically enhanced apatite forming ability compared with the un- treated one. In vivo test revealed significantly that a higher amount of bone ingrowth and bone implant contact at the treated scaffold. The 2 types of scaffolds had different patterns of bone ingrowth; the treated scaffold exhibited a pattern of contact osteogenesis, by which bone formed directly on the treated implant surface, whereas bone formed distal to the implant surface of the untreated scaffold. MAO-HT treat- ment can significantly enhance the in vitro apatite-inducing ability and in vivo osseointegration capacity of 3-D porous Ti64 scaffold and may provide as a viable approach for the fabrication of bioactive 3-D printed porous implant for orthopedic applications.
基金financially supported by The National Key Research and Development Program of China(grant number 2017YFC1104901)The National Natural Science Foundation of China(grant number 51871239,51771227)National Natural Science Foundation of Youth Fund(grant number 51501223).
文摘The insufficient osteogenesis and osseointegration of porous titanium based scaffold limit its further application.Early angiogenesis is important for scaffold survival.It is necessary to develop a multifunctional surface on titanium scaffold with both osteogenic and angiogenic properties.In this study,a biofunctional magnesium coating is deposited on porous Ti6Al4V scaffold.For osseointegration and osteogenesis analysis,in vitro studies reveal that magnesium-coated Ti6Al4V co-culture with MC3T3-E1 cells can improve cell proliferation,adhesion,extracellular matrix(ECM)mineralization and ALP activity compared with bare Ti6Al4V cocultivation.Additionally,MC3T3-E1 cells cultured with magnesium-coated Ti6Al4V show significantly higher osteogenesisrelated genes expression.In vivo studies including fluorochrome labeling,micro-computerized tomography and histological examination of magnesium-coated Ti6Al4V scaffold reveal that new bone regeneration is significantly increased in rabbits after implantation.For angiogenesis studies,magnesium-coated Ti6Al4V improve HUVECs proliferation,adhesion,tube formation,wound-healing and Transwell abilities.HUVECs cultured with magnesium-coated Ti6Al4V display significantly higher angiogenesis-related genes(HIF-1αand VEGF)expression.Microangiography analysis reveal that magnesium-coated Ti6Al4V scaffold can significantly enhance the blood vessel formation.This study enlarges the application scope of magnesium and provides an optional choice to the conventional porous Ti6Al4V scaffold with enhanced osteogenesis and angiogenesis for further orthopedic applications.
基金supported by grants from the National Key Research and Development Program of China(grant number 2017YFC1104901)to Zheng Guothe National Natural Science Foundation of China(grant number 51771227)to Zheng Guo+2 种基金the Youth Development Program of Chinese People's Liberation Army(No.20QNPY069)to Bo Fanthe National Natural Science Foundation of China(No.31800812)to Bo Fanthe National Natural Science Foundation of China(grant number 51771227)to Zheng Guo.
文摘For large segmental bone defects,porous titanium scaffolds have some advantages,however,they lack electrical activity which hinders their further use.In this study,a barium titanate(BaTiO3)piezoelectric ceramic was used to modify the surface of a porous Ti6Al4V scaffold(pTi),which was characterized by scanning electron microscopy,energy dispersive spectroscopy,X-ray photoelectron spectroscopy,and roughness and water contact angle analyses.Low intensity pulsed ultrasound(LIPUS)was applied in vitro and in vivo study.The activity of bone marrow mesenchymal stem cells,including adhesion,proliferation,and gene expression,was significantly superior in the BaTiO3/pTi,pTi+LIPUS,and BaTiO3/pTi+LIPUS groups than in the pTi group.The activity was also higher in the BaTiO3/pTi+LIPUS group than in the BaTiO3/pTi and pTi+LIPUS groups.Additionally,micro-computed tomography,the mineral apposition rate,histomorphology,and the peak pull-out load showed that these scaffold conditions significantly enhanced osteogenesis and osseointegration 6 and 12 weeks after implantation in large segmental bone defects in the radius of rabbits compared with those resulting from the pTi condition.Consequently,the improved osteogenesis and osseointegration make the BaTiO3/pTi+LIPUS a promising method to promote bone regeneration in large segmental bone defects for clinical application.