The velocity feedback in a load simulator with a motor synchronizing in position is achieved by installing a tachometer generator between tile shaft and shell of the loading motor, and thes not only decreases the dist...The velocity feedback in a load simulator with a motor synchronizing in position is achieved by installing a tachometer generator between tile shaft and shell of the loading motor, and thes not only decreases the disturbance torque of tile load simlilator greatly but also improves its dynamic performance.展开更多
A novel speed-assigned method is applied to the position tracking control of switched reluctance motor(SRM).A speed control freedom can be drawn into the position control through speed assignment. Adaptive backsteppin...A novel speed-assigned method is applied to the position tracking control of switched reluctance motor(SRM).A speed control freedom can be drawn into the position control through speed assignment. Adaptive backstepping control is used to design the position controller for the SRM. The accuracy of position tracking of the SRM can be enhanced with speed assignment. A disturbance observer is further designed to enhance the estimation accuracy of the unknown load torque. Simulation results certify that the design scheme is right and effective.展开更多
With the increasing number of human-robot interaction applications, robot control characteristics and their effects on safety as well as performance should be taken account into the robot control system. In this paper...With the increasing number of human-robot interaction applications, robot control characteristics and their effects on safety as well as performance should be taken account into the robot control system. In this paper, a position and torque switching con- trol method was proposed to improve the robot safety and performance, when robots and humans work in the same space. The switch- ing control method includes two modes, the position control mode using a proportion-integral （PI） algorithm, and the torque control mode using sliding mode control （SMC） algorithm for eliminating swing. Under the normal condition, the robot works in position con- trol mode for trajectory tracking with quick response. Once the robot and human collide, the robot will switch to torque control mode immediately, and the impact force will be restricted within a safe range. When the robot and human detach, the robot will resume to po- sition control mode automatically. Moreover, for a better performance, the joint torque is detected fl＇om direct-current （DC） motor＇s cur- rent rather than the torque sensor. The experiment results show that the proposed approach is effective and feasible.展开更多
文摘The velocity feedback in a load simulator with a motor synchronizing in position is achieved by installing a tachometer generator between tile shaft and shell of the loading motor, and thes not only decreases the disturbance torque of tile load simlilator greatly but also improves its dynamic performance.
基金supported by the National Natural Science Foundation of China(61273086)
文摘A novel speed-assigned method is applied to the position tracking control of switched reluctance motor(SRM).A speed control freedom can be drawn into the position control through speed assignment. Adaptive backstepping control is used to design the position controller for the SRM. The accuracy of position tracking of the SRM can be enhanced with speed assignment. A disturbance observer is further designed to enhance the estimation accuracy of the unknown load torque. Simulation results certify that the design scheme is right and effective.
基金supported by National Natural Science Foundation of China(Nos.51175084,51575111 and 51605093)Fujian Province Natural Science Foundation(No.2015J05121)Fuzhou University-Enterprise Cooperation Project(No.2015H6012)
文摘With the increasing number of human-robot interaction applications, robot control characteristics and their effects on safety as well as performance should be taken account into the robot control system. In this paper, a position and torque switching con- trol method was proposed to improve the robot safety and performance, when robots and humans work in the same space. The switch- ing control method includes two modes, the position control mode using a proportion-integral （PI） algorithm, and the torque control mode using sliding mode control （SMC） algorithm for eliminating swing. Under the normal condition, the robot works in position con- trol mode for trajectory tracking with quick response. Once the robot and human collide, the robot will switch to torque control mode immediately, and the impact force will be restricted within a safe range. When the robot and human detach, the robot will resume to po- sition control mode automatically. Moreover, for a better performance, the joint torque is detected fl＇om direct-current （DC） motor＇s cur- rent rather than the torque sensor. The experiment results show that the proposed approach is effective and feasible.
