A novel fractional uplink power control framework for self-organizing networks

Internet of things and network densification bring significant challenges to uplink management.Only depending on optimization algorithm enhancements is not enough for uplink transmission.To control intercell interference,Fractional Uplink Power Control(FUPC)should be optimized from network-wide perspective,which has to find a better traffic distribution model.Conventionally,traffic distribution is geographic-based,and ineffective due to tricky locating efforts.This paper proposes a novel uplink power management framework for Self-Organizing Networks(SON),which firstly builds up pathloss-based traffic distribution model and then makes the decision of FUPC based on the model.PathLoss-based Traffic Distribution(PLTD)aggregates traffic based on the propagation condition of traffic that is defined as the pathloss between the position generating the traffic and surrounding cells.Simulations show that the improvement in optimization efficiency of FUPC with PLTD can be up to 40%compared to conventional GeoGraphic-based Traffic Distribution(GGTD).

Distributed robust power control in two-tier vehicle networks under uncertain channel environments

This paper proposes a novel optimization scheme to support stable and reliable vehicle-to-everything connections in two-tier networks,where the uplink channel of the cellular user is reused by underlay vehicle-to-vehicle communications.However,considering complex channel fading and high-speed vehicle movement,the cer-tainty assumption is impractical and fails to maintain power control strategy in reality in the traditional statical vehicular networks.Rather than the perfect channel state information assumption,the first-order Gauss-Markov process which is a probabilistic model affected by vehicle speed and fading is introduced to describe imperfect channel gains.Moreover,interference management is a major challenge in reusing communications,especially in uncertain channel environments.Power control is an effective way to realize interference management,and optimal power allocation can ensure that interference of the user meets the communication requirements.In this study,the sum-rate-oriented power control scheme and minimum-rate-oriented power control scheme were implemented to manage interference and satisfy different design objectives.Since both of these schemes are non-convex and intractable,the Bernstein approximation and successive convex approximation methods were adopted to transform the original problems into convex ones.Furthermore,a novel distributed robust power control al-gorithm was developed to determine the optimal solutions.The performance of the algorithm was evaluated through numerical simulations,and the results indicate that the proposed algorithm is effective in vehicular communication networks with uncertain channel environments.

A Deep Reinforcement Learning-Based Power Control Scheme for the 5G Wireless Systems

In the fifth generation(5G)wireless system,a closed-loop power control(CLPC)scheme based on deep Q learning network(DQN)is introduced to intelligently adjust the transmit power of the base station(BS),which can improve the user equipment(UE)received signal to interference plus noise ratio(SINR)to a target threshold range.However,the selected power control(PC)action in DQN is not accurately matched the fluctuations of the wireless environment.Since the experience replay characteristic of the conventional DQN scheme leads to a possibility of insufficient training in the target deep neural network(DNN).As a result,the Q-value of the sub-optimal PC action exceed the optimal one.To solve this problem,we propose the improved DQN scheme.In the proposed scheme,we add an additional DNN to the conventional DQN,and set a shorter training interval to speed up the training of the DNN in order to fully train it.Finally,the proposed scheme can ensure that the Q value of the optimal action remains maximum.After multiple episodes of training,the proposed scheme can generate more accurate PC actions to match the fluctuations of the wireless environment.As a result,the UE received SINR can achieve the target threshold range faster and keep more stable.The simulation results prove that the proposed scheme outperforms the conventional schemes.

Adaptive and distance-driven power control scheme in mobile ad hoc networks

In order to save the energy and reduce the latency of the end-to-end transmission in mobile ad hoc networks an adaptive and distance-driven power control ADPC scheme is proposed by means of distance research in random geometrics. Through mathematical proof the optimal number of relay nodes and the optimal location of each node for data transmission can be obtained when a distance is given.In the ADPC first the source node computes the optimal number and the sites of the relay nodes between the source and the destination nodes.Then it searches feasible relay nodes around the optimal virtual relay-sites and selects one link with the minimal total transmission energy consumption for data transmission.Simulation results show that the ADPC can reduce both the energy dissipation and the end-to-end latency of the transmission.

An Uplink Power Control Scheme in CDMA Mobile Communication System

A brief introduction of principles and algorithm realization of uplink power control in CDMA mobile communication system based on IS 95 are given, and then the blocking probability and Erlang capacity under the condition of perfect and imperfect uplink power control are presented and analyzed. Finally the uplink power control algorithms are simulated, and the optimum uplink power control algorithm that maximizes system Erlang capacity is acquired.

Distributed Power Control for Energy Conservation in Hybrid Cellular Network with Device-to-Device Communication

Device-to-Device(D2D) communication has been proposed as a promising implementation of green communication to benefit the existed cellular network.In order to limit cross-tier interference while explore the gain of short-range communication,we devise a series of distributed power control(DPC) schemes for energy conservation(EC)and enhancement of radio resource utilization in the hybrid system.Firstly,a constrained opportunistic power control model is built up to take advantage of the interference avoidance methodology in the presence of service requirement and power constraint.Then,biasing scheme and admission control are added to evade ineffective power consumption and maintain the feasibility of the system.Upon feasibility,a non-cooperative game is further formulated to exploit the profit in EC with minor influence on spectral efficiency(SE).The convergence of the DPC schemes is validated and their performance is confirmed via simulation results.

Mobile Jammer-Aided Secure UAV Communications via Trajectory Design and Power Control

To further promote the achievable average secrecy rate for UAV-ground communications, a UAV-aided mobile jamming strategy was proposed in this paper. Specifically, an additional cooperative UAV is employed as a mobile jammer to transmit the jamming signal to help keep the source UAV closer to the ground destination, thus establishing more favorable legitimate link and enhancing the secrecy performance. We aimed to maximize the achievable secrecy rate by jointly optimizing the trajectories and transmit power of both source UAV and jammer UAV. To solve the considered non-convex optimization problem, we presented a block coordinate descent based iterative algorithm to address a sequence of approximated convex problems for the optimized parameter block by block to find a local optimal solution. Numerical results verify that the proposed algorithm can achieve significant secrecy rate gain compared to all the benchmark schemes.

A Combining Call Admission Control and Power Control Scheme for D2D Communications Underlaying Cellular Networks

As device-to-device(D2D) communications usually reuses the resource of cellular networks, call admission control(CAC) and power control are crucial problems. However in most power control schemes, total data rates or throughput are regarded as optimization criterion. In this paper, a combining call admission control(CAC) and power control scheme under guaranteeing QoS of every user equipment(UE) is proposed. First, a simple CAC scheme is introduced. Then based on the CAC scheme, a combining call admission control and power control scheme is proposed. Next, the performance of the proposed scheme is evaluated. Finally, maximum DUE pair number and average transmitting power is calculated. Simulation results show that D2 D communications with the proposed combining call admission control and power control scheme can effectively improve the maximum DUE pair number under the premise of meeting necessary QoS.

Distributed power control algorithm based on game theory for wireless sensor networks

Energy saving is the most important issue in research and development for wireless sensor networks. A power control mechanism can reduce the power consumption of the whole network. Because the character of wireless sensor networks is restrictive energy, this paper proposes a distributed power control algorithm based on game theory for wireless sensor networks which objects of which are reducing power consumption and decreasing overhead and increasing network lifetime. The game theory and OPNET simulation shows that the power control algorithm converges to a Nash Equilibrium when decisions are updated according to a better response dynamic.

Power Control for Fading Channels in Cognitive Radio Networks with Outage-Probability Minimization

Cognitive radio allows Secondary Users （SUs） to dynamically use the spectrum resource licensed to Prirmry Users （PUs）, and significantly improves the efficiency of spectrum utilization and is viewed as a promising technology. In cognitive radio networks, the problem of power control is an important issue. In this paper, we mainly focus on the problem of power control for fading channels in cognitive radio networks. The spectrum sharing underlay scenario is considered, where SUs are allowed to coexist with PUs on the condition that the outage probability of PUs is below the maximum outage probability threshold limitation due to the interference caused by SUs. Moreover, besides the outage probability threshold which is defined to protect the performance of PUs, we also consider the maximum transmit power constraints for each SU. With such a setup, we emphasize the problem of power control to minimize the outage probability of each SU in fading channels. Then, based on the statistical information of the fading channel, the closed expression for outage probability is given in fading channels. The Dual-Iteration Power Control （DIPC） algorithm is also proposed to minimize the outage probability based on Perron-Frobenius theory and gradient descent method under the constraint condition. Finally, simulation results are illustrated to demonstrate the performance of the proposed scheme.

DS-CDMA system outer loop power control and improvement for multi-service

When a new user accesses the CDMA system, the load will change drastically, and therefore, the advanced outer loop power control （OLPC） technology has to be adopted to enrich the target signal interference ratio （Silt） and improve the system performance. The existing problems about DS-CDMA outer loop power control for multi-service are introduced and the power control theoretical model is analyzed. System simulation is adopted on how to obtain the theoretical performance and parameter optimization of the power control algorithm. The OLPC algorithm is improved and the performance comparisons between the old algorithm and the improved algorithm are given. The results show good performance of the improved OLPC algorithm and prove the validity of the improved method for multi-service.

Low complexity power control approach based on MMSE detection for V-BLAST

A low complexity Per-Antenna Power Control （PAPC） approach based on Minimum Mean Squared Error （MMSE） detection for V-BLAST is proposed in this paper. The PAPC approach is developed for minimizing the Bit Error Rate （BER） averaged over all substreams when the data throughput and the total transmit power keep constant over time. Simulation results show that the Power-controlled V-BLAST （P-BLAST） outperforms the conventional V-BLAST in terms of BER performance with MMSE detector, especially in presence of high spatial correlation between antennas. However, the additional complexity for P-BLAST is not high. When MMSE detector is adopted, the P-BLAST can achieve a comparable BER performance to that of conventional V-BLAST with Maximum Likelihood （ML） detector but with low complexity.

Power control and channel allocation optimization game algorithm with low energy consumption for wireless sensor network

In a wireless sensor network （WSN）, the energy of nodes is limited and cannot be charged. Hence, it is necessary to reduce energy consumption. Both the transmission power of nodes and the interference among nodes influence energy consumption. In this paper, we design a power control and channel allocation game model with low energy consumption （PCCAGM）. This model contains transmission power, node interference, and residual energy. Besides, the interaction between power and channel is considered. The Nash equilibrium has been proved to exist. Based on this model, a power control and channel allocation optimization algorithm with low energy consumption （PCCAA） is proposed. Theoretical analysis shows that PCCAA can converge to the Pareto Optimal. Simulation results demonstrate that this algorithm can reduce transmission power and interference effectively. Therefore, this algorithm can reduce energy consumption and prolong the network lifetime.

POWER CONTROL BASED COOPERATIVE OPPORTUNISTIC ROUTING IN WIRELESS SENSOR NETWORKS

This paper proposes an approach called PC-CORP (Power Control based Cooperative Opportunistic Routing Protocol) for WSN (Wireless Sensor Networks), providing robustness to the random variations in network connectivity while ensuring better data forwarding efficiency in an energy efficient manner. Based on the realistic radio model, we combine the region-based routing, rendezvous scheme, sleep discipline and cooperative communication together to model data forwarding by cross layer design in WSN. At the same time, a lightweight transmission power control algorithm called PC-AIMD (Power Control Additive Increase Multiplicative Decrease) is introduced to utilize the co- operation of relay nodes to improve the forwarding efficiency performance and increase the robustness of the routing protocol. In the simulation, the performance of PC-COPR is investigated in terms of the adaptation of variations in network connectivity and satisfying the QoS requirements of application.

Power Control and Routing Selection for Throughput Maximization in Energy Harvesting Cognitive Radio Networks

This paper investigates the power control and routing problem in the communication process of an energy harvesting(EH)multi-hop cognitive radio network(CRN).The secondary user(SU)nodes(i.e.,source node and relay nodes)harvest energy from the environment and use the energy exclusively for transmitting data.The SU nodes(i.e.,relay nodes)on the path,store and forward the received data to the destination node.We consider a real world scenario where the EH-SU node has only local causal knowledge,i.e.,at any time,each EH-SU node only has knowledge of its own EH process,channel state and currently received data.In order to study the power and routing issues,an optimization problem that maximizes path throughput considering quality of service(QoS)and available energy constraints is proposed.To solve this optimization problem,we propose a hybrid game theory routing and power control algorithm(HGRPC).The EH-SU nodes on the same path cooperate with each other,but EH-SU nodes on the different paths compete with each other.By selecting the best next hop node,we find the best strategy that can maximize throughput.In addition,we have established four steps to achieve routing,i.e.,route discovery,route selection,route reply,and route maintenance.Compared with the direct transmission,HGRPC has advantages in longer distances and higher hop counts.The algorithm generates more energy,reduces energy consumption and increases predictable residual energy.In particular,the time complexity of HGRPC is analyzed and its convergence is proved.In simulation experiments,the performance(i.e.,throughput and bit error rate(BER))of HGRPC is evaluated.Finally,experimental results show that HGRPC has higher throughput,longer network life,less latency,and lower energy consumption.

Security Rate Optimization of D2D Communication Based on Power Control

An optimization of device-to-device(D2D) security rate algorithm based on power control is provided to enhance the physical layer security underlaying D2D communication and guarantee the data rate requirement of the cellular user(CU) at the same time.First,a scenario model is set up,in which an eavesdropper is considered to wiretap the information of D2D transmitters.Then,a secure region of D2D communication is proposed.When D2D communication users reside outside the secure region,the spectrum of CU's is not allowed to share with the D2D communication so as to avoid eavesdropper tapping useful information of D2D communication.When D2D communication users reside inside the secure region,the security rate of D2D is maximized by optimization of the transmitting power of D2D and CU.The simulation results showthat the achieved D2D security rate of the proposed algorithm increases 2.8 bps/Hz when the signal to noise ratio(SNR) is 15 d B,compared with that when the random access algorithm is used.

Dynamic modeling and direct power control of wind turbine driven DFIG under unbalanced network voltage conditions

This paper proposes an analysis and a direct power control (DPC) design of a wind turbine driven doubly-fed induction generator (DFIG) under unbalanced network voltage conditions. A DFIG model described in the positive and negative synchronous reference frames is presented. Variations of the stator output active and reactive powers are fully deduced in the presence of negative sequence supply voltage and rotor flux. An enhanced DPC scheme is proposed to eliminate stator active power oscillation during network unbalance. The proposed control scheme removes rotor current regulators and the decomposition processing of positive and negative sequence rotor currents. Simulation results using PSCAD/EMTDC are presented on a 2-MW DFIG wind power generation system to validate the feasibility of the proposed control scheme under balanced and unbalanced network conditions.

Guarding Legal Communication with Smart Jammer:Stackelberg Game Based Power Control Analysis

This paper investigates a power control problem in a jamming system,where a separate smart jammer is deployed to ensure the communication security of the legal user.However,due to power leakage,the smart jammer may incur unintentional interference to legal users.The key is how to suppress illegal communication while limit the negative impact on legal user.A jamming counter measure Stackelberg game is formulated to model the jamming power control dynamic of the system.The smart jammer acts as a leader to sense and interfere illegal communications of the illegal user,while the illegal user acts as a follower.In the game,the impact of uncertain channel information is taken into account.According to whether illegal user considers the uncertain channel information,we investigate two scenarios,namely,illegal user can obtain statistical distribution and accurate information of interference channel gain and its own cost,respectively.This work not only proposes a jamming counter measure iterative algorithm to update parameters,but also gives two solutions to obtain the Stackelberg equilibrium(SE).The power convergence behaviours under two scenarios are analyzed and compared.Additionally,brute force is used to verify the accuracy of the SE value further.

PCTRAN Westinghouse AP1000 Power Control of Pressurized Water Reactor Using Simulink of MATLAB

This paper introduces the simulation, and controls using Simulink of MATLAB for PCTRAN (Personal Computer Transient Analysis) of the power control system (PWR) type pressurized water reactor of PWR WESTINGHOUSE AP1000. The power controller model produces mathematical model description in nonlinear relation form in Simulink of MATLAB which is an important and popular program used at most universities for education. The power controller is described by a block diagram in this paper and some details introduce to clearly understand the work function. The results of action control compared with the PCTRAN programme in modes of automatic and manual control.

Joint power control and relay selection scheme for cognitive two-way relay networks

A joint power control and relay selection scheme is considered for a cooperative and cognitive radio system where a secondary network shares spectrum with the primary network. In the secondary network, two secondary users （SUs） communicate with each other via an assist relay. The main point is to provide the best system performance to SUs while maintaining the interference power at primary user （PU） under a certain level. Using convex optimization, a closed-form solution is obtained when optimizing the power allocation among the two nodes and relay. Based on this result, a joint power control and relay selection scheme with fewer variable dimensions is proposed to maximize the achievable rate of the secondary system. Simulation results demonstrate that the sum rate of the cognitive two-way relay network increases compared with a random relay selection and fixed power allocation.