A variational formulation of the synthesis problem for plane radiating systems according to the prescribed power directivity pattern (DP) is considered. The function representing the mean-square deviation of the presc...A variational formulation of the synthesis problem for plane radiating systems according to the prescribed power directivity pattern (DP) is considered. The function representing the mean-square deviation of the prescribed and synthesized power DPs and containing the additional term with squared norm of the current or field in the antenna aperture is considered as the criterion of optimization. Freedom to choose the phase DP is used to improve the proximity of the prescribed and synthesized DPs. In such formulation, the classes of non-linear problems, for which the non-uniqueness of solutions, their branching and bifurcation are characteristic, arise. The properties of solutions depend on the electric size of radiating system and prescribed power DP. From a practical point of view, the existence of different solutions creating the same or similar DPs, gives the opportunity to choose the solution that has a simpler implementation. The synthesis problems for plane radiating systems and plane arrays are considered.展开更多
A novel built-in-self-test(BIST) method called seeded autonomous cyclic shift register (SACSR) is presented to reduce test power of the sequential circuit. The key idea is to use a pseudorandom pattern generator and s...A novel built-in-self-test(BIST) method called seeded autonomous cyclic shift register (SACSR) is presented to reduce test power of the sequential circuit. The key idea is to use a pseudorandom pattern generator and several XOR gates to generate seeds that share fewer test vectors. The generated seed is taken XOR operation with a cyclic shift register, and the single input change (SIC) sequence is generated. The proposed scheme is easily implemented and can reduce the switching activities of the circuit under test (CUT) greatly. Experimental results on ISCAS89 benchmarks show that on average more than 63% power reduction can be achieved. It also demonstrates that the generated test vectors attain high fault coverage for stuck-at fault and transition fault coverage with short test length.展开更多
A novel dual-band and diverse radiation pattern antenna is proposed for power efficient on-body and off-body communications intended for various applications in healthcare and sport monitoring. The antenna is dual ban...A novel dual-band and diverse radiation pattern antenna is proposed for power efficient on-body and off-body communications intended for various applications in healthcare and sport monitoring. The antenna is dual band at 2.45 GHz (ISM band) with omnidirectional radiation pattern over the body surface to communicate power efficiently with other co-located body worn devices and at 1.9 GHz (PCS band), it has directive radiation pattern towards off the body to communicate from on-body device to off-body devices. The free space and on-body performances of the antenna are investigated by both simulation and experiment. The antenna shows very good on-body radiation efficiency of 58% at 2.45 GHz and 61% at 1.9 GHz. Good on-body gain is noticed at both frequency bands. Results show that the gain of the proposed antenna increases by 4.7% at 2.45 GHz and 3.2% at 1.9 GHz when placed on the body.展开更多
为改善电力管廊的通风效果,依托北京新机场高速公路综合管廊工程,采用数值分析与现场试验的方法,对电力舱通风规律进行系统研究。在得到初步规律的基础上,通过改变通风方式、通风口位置和电缆布局,对比研究机械进风自然排风和自然进风...为改善电力管廊的通风效果,依托北京新机场高速公路综合管廊工程,采用数值分析与现场试验的方法,对电力舱通风规律进行系统研究。在得到初步规律的基础上,通过改变通风方式、通风口位置和电缆布局,对比研究机械进风自然排风和自然进风机械排风、通风口设在管廊顶部和两侧、10 k V和110 k V电缆交换位置3类6种工况下的通风效果。结果表明:1)现有正常通风条件下,从进风口到排风口,进风口处气流组织混乱;同时,由于在进风口处气流2次改变运动方向导致能量损失很大,致使可用于驱动管廊内空气的能量减小,通风效果下降,造成能源浪费。2)将通风口(风机)布置在电力舱两侧时,因初始风速与通风方向一致,避免了能量损失,有效提高了通风效果。研究显示,管廊中间断面的平均风速提高了0.31 m/s,变幅达39.6%;温度降低了1.6℃,变幅达6.1%;压力损失降低了13.7 Pa,变幅达30.4%,极大地改善了电力舱通风效果。3)在通风口(风机)位于顶部的条件下,对电缆布局优化后,10 k V电缆表面温度降低3.21℃,110 k V电缆表面温度升高1.68℃,纵断面平均温度下降0.365℃,电缆布局调整有利于降低舱内温度,减少压力损失。展开更多
The paper covers analysis and investigation of lighting automation system in low-traffic long-roads. The main objective is to provide optimal solution between expensive safe design that utilizes continuous street ligh...The paper covers analysis and investigation of lighting automation system in low-traffic long-roads. The main objective is to provide optimal solution between expensive safe design that utilizes continuous street lighting system at night for the entire road, or inexpensive design that sacrifices the safety, relying on using vehicles lighting, to eliminate the problem of high cost energy consumption during the night operation of the road. By taking into account both of these factors, smart lighting automation system is proposed using Pattern Recognition Technique applied on vehicle number-plates. In this proposal, the road is sectionalized into zones, and based on smart Pattern Recognition Technique, the control system of the road lighting illuminates only the zone that the vehicles pass through. Economic analysis is provided in this paper to support the value of using this design of lighting control system.展开更多
稻城圆环阵太阳射电望远镜(Daocheng Solar Radio Telescope, DSRT)作为子午工程二期太阳-行星际探测子系统的重要部分,工作在150–450 MHz频段,可提供高空间、高时间分辨率的太阳爆发亮温图像.针对DSRT天线的高精度指向测量以及对指向...稻城圆环阵太阳射电望远镜(Daocheng Solar Radio Telescope, DSRT)作为子午工程二期太阳-行星际探测子系统的重要部分,工作在150–450 MHz频段,可提供高空间、高时间分辨率的太阳爆发亮温图像.针对DSRT天线的高精度指向测量以及对指向误差批量标定和校正的需求,首先根据DSRT独有的三轴座架系统,通过四元数旋转变换法建立了天线3参数编码器零点误差模型;然后提出了基于射电源的漂移扫描法获得16个单元天线功率方向图,并根据2维方向图确定波束中心的方法精确测量了DSRT天线指向误差;最后用最小二乘法拟合得到模型参数,并通过天线控制软件重新调整各个轴的零点,后对调整结果进行验证.结果表明指向校正方法可靠有效,校正后16个天线的指向精度为0.5°之内,明显优于校正前3.5°的指向误差,满足误差小于DSRT天线最高工作频率下的1/10波束范围内的要求.展开更多
为解决港口岸电系统中负荷功率存在较强冲击性问题,提出一种基于储能电池的负荷功率柔性控制方法,在实现功率实时平抑和无功动态补偿的基础上,降低系统网侧线损、提升储能电池循环寿命及应对极端工况的能力。首先,介绍负荷功率柔性控制...为解决港口岸电系统中负荷功率存在较强冲击性问题,提出一种基于储能电池的负荷功率柔性控制方法,在实现功率实时平抑和无功动态补偿的基础上,降低系统网侧线损、提升储能电池循环寿命及应对极端工况的能力。首先,介绍负荷功率柔性控制系统(load power flexible control system,LPFCS)的拓扑结构及控制方式;其次,依据负荷功率和电池荷电状态来划分负荷工况,进而以负荷功率波动的平抑、防止电池过充过放以及提升储能系统应对极端工况的能力为原则,将LPFCS的工作模式分为空闲、填谷、削峰以及限幅4种模式;然后,建立系统网侧线损优化模型,求解模型得出功率补偿值的取值区间,并基于该区间确定不同工况下LPFCS的功率补偿值。最后,基于长江某岸电系统实测负荷数据,对LPFCS的工作性能进行仿真和实验验证。结果表明:LPFCS的补偿响应时间小于0.3 s,负荷功率波动抑制率达到90%,系统网侧线损率下降17.2%。展开更多
文摘A variational formulation of the synthesis problem for plane radiating systems according to the prescribed power directivity pattern (DP) is considered. The function representing the mean-square deviation of the prescribed and synthesized power DPs and containing the additional term with squared norm of the current or field in the antenna aperture is considered as the criterion of optimization. Freedom to choose the phase DP is used to improve the proximity of the prescribed and synthesized DPs. In such formulation, the classes of non-linear problems, for which the non-uniqueness of solutions, their branching and bifurcation are characteristic, arise. The properties of solutions depend on the electric size of radiating system and prescribed power DP. From a practical point of view, the existence of different solutions creating the same or similar DPs, gives the opportunity to choose the solution that has a simpler implementation. The synthesis problems for plane radiating systems and plane arrays are considered.
文摘A novel built-in-self-test(BIST) method called seeded autonomous cyclic shift register (SACSR) is presented to reduce test power of the sequential circuit. The key idea is to use a pseudorandom pattern generator and several XOR gates to generate seeds that share fewer test vectors. The generated seed is taken XOR operation with a cyclic shift register, and the single input change (SIC) sequence is generated. The proposed scheme is easily implemented and can reduce the switching activities of the circuit under test (CUT) greatly. Experimental results on ISCAS89 benchmarks show that on average more than 63% power reduction can be achieved. It also demonstrates that the generated test vectors attain high fault coverage for stuck-at fault and transition fault coverage with short test length.
文摘A novel dual-band and diverse radiation pattern antenna is proposed for power efficient on-body and off-body communications intended for various applications in healthcare and sport monitoring. The antenna is dual band at 2.45 GHz (ISM band) with omnidirectional radiation pattern over the body surface to communicate power efficiently with other co-located body worn devices and at 1.9 GHz (PCS band), it has directive radiation pattern towards off the body to communicate from on-body device to off-body devices. The free space and on-body performances of the antenna are investigated by both simulation and experiment. The antenna shows very good on-body radiation efficiency of 58% at 2.45 GHz and 61% at 1.9 GHz. Good on-body gain is noticed at both frequency bands. Results show that the gain of the proposed antenna increases by 4.7% at 2.45 GHz and 3.2% at 1.9 GHz when placed on the body.
文摘为改善电力管廊的通风效果,依托北京新机场高速公路综合管廊工程,采用数值分析与现场试验的方法,对电力舱通风规律进行系统研究。在得到初步规律的基础上,通过改变通风方式、通风口位置和电缆布局,对比研究机械进风自然排风和自然进风机械排风、通风口设在管廊顶部和两侧、10 k V和110 k V电缆交换位置3类6种工况下的通风效果。结果表明:1)现有正常通风条件下,从进风口到排风口,进风口处气流组织混乱;同时,由于在进风口处气流2次改变运动方向导致能量损失很大,致使可用于驱动管廊内空气的能量减小,通风效果下降,造成能源浪费。2)将通风口(风机)布置在电力舱两侧时,因初始风速与通风方向一致,避免了能量损失,有效提高了通风效果。研究显示,管廊中间断面的平均风速提高了0.31 m/s,变幅达39.6%;温度降低了1.6℃,变幅达6.1%;压力损失降低了13.7 Pa,变幅达30.4%,极大地改善了电力舱通风效果。3)在通风口(风机)位于顶部的条件下,对电缆布局优化后,10 k V电缆表面温度降低3.21℃,110 k V电缆表面温度升高1.68℃,纵断面平均温度下降0.365℃,电缆布局调整有利于降低舱内温度,减少压力损失。
文摘The paper covers analysis and investigation of lighting automation system in low-traffic long-roads. The main objective is to provide optimal solution between expensive safe design that utilizes continuous street lighting system at night for the entire road, or inexpensive design that sacrifices the safety, relying on using vehicles lighting, to eliminate the problem of high cost energy consumption during the night operation of the road. By taking into account both of these factors, smart lighting automation system is proposed using Pattern Recognition Technique applied on vehicle number-plates. In this proposal, the road is sectionalized into zones, and based on smart Pattern Recognition Technique, the control system of the road lighting illuminates only the zone that the vehicles pass through. Economic analysis is provided in this paper to support the value of using this design of lighting control system.
文摘稻城圆环阵太阳射电望远镜(Daocheng Solar Radio Telescope, DSRT)作为子午工程二期太阳-行星际探测子系统的重要部分,工作在150–450 MHz频段,可提供高空间、高时间分辨率的太阳爆发亮温图像.针对DSRT天线的高精度指向测量以及对指向误差批量标定和校正的需求,首先根据DSRT独有的三轴座架系统,通过四元数旋转变换法建立了天线3参数编码器零点误差模型;然后提出了基于射电源的漂移扫描法获得16个单元天线功率方向图,并根据2维方向图确定波束中心的方法精确测量了DSRT天线指向误差;最后用最小二乘法拟合得到模型参数,并通过天线控制软件重新调整各个轴的零点,后对调整结果进行验证.结果表明指向校正方法可靠有效,校正后16个天线的指向精度为0.5°之内,明显优于校正前3.5°的指向误差,满足误差小于DSRT天线最高工作频率下的1/10波束范围内的要求.
文摘为解决港口岸电系统中负荷功率存在较强冲击性问题,提出一种基于储能电池的负荷功率柔性控制方法,在实现功率实时平抑和无功动态补偿的基础上,降低系统网侧线损、提升储能电池循环寿命及应对极端工况的能力。首先,介绍负荷功率柔性控制系统(load power flexible control system,LPFCS)的拓扑结构及控制方式;其次,依据负荷功率和电池荷电状态来划分负荷工况,进而以负荷功率波动的平抑、防止电池过充过放以及提升储能系统应对极端工况的能力为原则,将LPFCS的工作模式分为空闲、填谷、削峰以及限幅4种模式;然后,建立系统网侧线损优化模型,求解模型得出功率补偿值的取值区间,并基于该区间确定不同工况下LPFCS的功率补偿值。最后,基于长江某岸电系统实测负荷数据,对LPFCS的工作性能进行仿真和实验验证。结果表明:LPFCS的补偿响应时间小于0.3 s,负荷功率波动抑制率达到90%,系统网侧线损率下降17.2%。
