Analysis of OFDM Applied to Powerline High Speed Digital Communication

The low voltage powerline is becoming a powerful solution to home network, building automation, and internet access as a result of its wide distribution, easy access and little maintenance. The character of powerline channel is very complicated because it is an open net. This article analysed the character of the powerline channel,introduced the basics of OFDM(Orthogonal Frequency Division Multiplexing), and studied the OFDM applied into powerline high speed digital communication.

Modeling of OFDM Based Transceiver for Broadband Powerline Communication

In the recent past power line communication has emerged as an attractive choice for high speed data transfer and is looked upon as inexpensive and reliable media suitable for broadband internet access, home and office automation, in-vehicle data communication etc. In this paper we present an architecture for the physical layer of a PLC transceiver based on Orthogonal Frequency Division Multiplexing (OFDM) and the impact on multipath distortion for PLC transmission in terms of bit error rate. Since there is no standard PLC channel model available, a widely accepted multipath channel model is used for simulation purpose. Simulation results as well as FPGA synthesis verify the effectiveness of the proposed architecture for PLC modem design at 110 Mbps data rate.

OFDM-based Low-voltage Powerline High Rate Communication

Based on the experimental results, a simplified model for low-voltage powerline used as a high frequency communication channel is presented. With this model, the Orthogonal Frequency Division Multiplexing (OFDM) based high rate digital communication over low-voltage powerline is analyzed and simulated. The capability of the signal transmission system in overcoming multi-path interference and selection of the system parameters are discussed. And time-domain simulation is carried out to investigate the transmission capability of the OFDM communication system for different mapping schemes and transmission power levels. Simulation results show that it is possible to realize high rate digital communication over low-voltage powerline using OFDM when the transmitted power is large enough.

Polar codes based OFDM-PLC systems in the presence of impulsive noise

Power line communication(PLC)has the potential to become the preferred technique for providing broadband communication to homes and offices with advantage of eliminating the need for new wiring infrastructure and reducing the cost.But it suffers from the impulsive noise because it introduces significant time variance into the power line channel.In this paper,a polar codes based orthogonal frequency division multiplexing(OFDM)PLC system is proposed to deal with the impulsive noise and thereby improve the transmission performance.Firstly,the impulsive noise is modelled with a multi-damped sine function by analyzing the time behavior of impulse events.Then the polar codes are used to combat the impulsive noise of PLC channel,and a low complexity bit-flipping decoding method based on CRC-aided successive cancellation list(CA-SCL)decoding algorithm is proposed.Simulations evaluate the proposed decoding algorithm and the results validate the suggested polar codes based OFDM-PLC scheme which can improve the BER performance of PLC with impulsive interference.

Implementation of CAN-bus Intelligent Network Communication Equipment Based on PLC

The development trend of PLC is that the functions are more, the integration level is greater and the network function is greater. Nowadays, the manufacturers of PLC develop there own network. PLC technique has two development trends. On one hand, PLC network system is not a self-contained closed system any longer and develops towards open system. Various PLC not only has distinctive PLC network systems and completes device control task, but also network with the superior computer management system to realize information exchange, which makes it become one part of information management system. On the other hand, the field-bus technique is widely applied. PLC is connected with the intelligent equipments installed on site such as intelligent instrument, sensor, intelligent solenoid valve, intelligent drive actuator by a transmission media （ such as twisted pair, coaxial cable and cable）, and they transmit information mutually according to the same communication protocol, which can form a field industrial control network. Compared with single PLC remote network, the network not only has the advantages of flexible configurations, easy expansion, low cost and higher cost perfomaance, but also has opening significance.

Performance Evaluation for Medium Voltage MIMO-OFDM Power Line Communication System

Power line communication(PLC)provides intelligent electrical functions such as power quality measurement,fault surveys,and remote control of electrical network.Most of research works have been done in low voltage(LV)scenario due to the fast development of in-home PLC.The aim of this paper is to evaluate the link-level performance of a medium voltage(MV)MIMO-OFDM communication system based on transmission link under underground power line channel.The MIMO channel is modeled as a modified multipath model in the presence of impulsive noise and background noise.We first perform a measurement on the practical MV MIMO channel parameters for a section of buried cable of 1 km long in Ganzhou city,Jiangxi province,China.Based on the measured channel,we design the frame structure based on an IEEE standard for broadband over power line networks[1]to support MV MIMO-OFDM transmission.According to designed frame structure,we design an encoder and a decoder for a dual binary tail-biting turbo code and optimize some key decoder parameters for low bit error rate performance.Finally,the link-level performance for both spatial multiplexing and spatial diversity are evaluated.Numeral results show that MV MIMO-OFDM is a promising approach to provide both high data rate and link reliability for PLC.

Time Domain Modeling of Powerline Impulsive Noise at Its Source

Noise characteristics of an indoor power line network strongly influence the link capability to achieve high data rates. The appliances shared with PLC modems in the same powerline network generate different types of noises, among them the impulsive noises are the main source of interference resulting in signal distortions and bit errors during data transmission. With regard to impulsive noise many models were proposed in the literature and shared the same impulsive noise definition: “unpredictable noises measured in the receiver side”. Authors are, consequently, confronted to model thousands of impulsive noises whose plurality would very likely come from the diversity of paths that the original impulsive noise took. In this paper, an innovative modelling approach is applied to impulsive noises which are studied here directly at their sources. Noise at receiver would be simply the noise model at source convolved by powerline channel block. In the new analytical model, the impulsive noise at source is described by a succession of short pulses, each modeled by a phase-shifted Gaussian. Noises at source are classified into 6 different classes [1], and a noise generator is established for each class.

WAVELET-BASED OFDM-CDMA HIGH SPEED POWER LINE COMMUNICATION SYSTEMS

This letter derives the Equivalent M-band Discrete Wavelet(EMDW) transmission mode of Orthogonal Frequency Division Multiplexing(OFDM) transmission systems, and presents a new Quadrature M-band Discrete Wavelet(QMDW) based OFDM-CDMA(Code Division Multiple Access) communication systems for high speed Power Line Communication (PLC) channels.This system gives much better robustness to Inter-Channel Interference (ICI), Multi-User Interference (MUI) and noise interference, which is verified by simulation.

Traffic Modeling of a Finite-Source Power Line Communication Network

Power line communication (PLC) is a promising smart grid application for information transmission using existing power lines. We analytically model a finite-source PLC network subject to channel failure through a queueing theoretic framework. The proposed PLC network model consists of a base station (BS), which is located at a transformer station and connected to the backbone communication networks, and a number of subscriber stations that are interconnected with each other and with the BS via the power line transmission medium. An orthogonal frequency division multiplexing based technique is assumed for forming the transmission channels in a frequency spectrum. The channels are subject to failure during service due to noise. We determine the steady-state solution of the proposed model and derive a set of performance metrics of interest. Numerical and simulation results are presented to provide further insights into the analytical results. The proposed modeling method is expected to be used for evaluation and design of future PLC networks.

Smart Home Networking: Lessons from Combining Wireless and Powerline Networking

Integrating the power grid technology with renewable power generation technologies, Demand Response (DR) programs enabled by the Advanced Metering Infrastructure (AMI) were introduced into the power grid in the interest of both utilities and residents. They help to achieve load balance and increase the grid reliability by encouraging residents to reduce their power usage during peak load periods in return for incentives. To automate this process, appliances, in-house sensors, and the AMI controller need to be networked together. In this paper, we compare mainstream network technologies applicable to home appliance control and propose a solution combining Power Line Communication (PLC) with wireless communication in smart homes for the purpose of energy saving. We extended NS-2, a popular network simulator, to model such combined network scenarios. Using a number of different routing strategies, we then model and evaluate the network performance of DR programs in smart homes in such a combined network.

新型PLC-075电力线数据传输装置

介绍了一种新型PLC-075电力线数据传输装置,阐述了基于虚拟载波帧测技术的多虚拟逻辑网络组网、增强型自适应模拟前端、自适应多频段收发、多耦合方式等关键技术;描述了其主要技术参数和应用于架空线和地埋电缆的不同耦合方式,给出了其在城市小区配电自动化中的具体应用实例。实践证明,该装置能有效地解决中压配电线传输特性的动态变化、突发干扰等难题,满足组网通信和实时性要求,可作为不同应用领域的低成本通信解决方案。

美国联合电力线通信协会(UPLC)2002年年会综述

介绍了美国联合电力线通信协会(UPLC)2002年年会的情况,从技术、标准、政策和市场4个方面综述了会议讨论的主要内容。

The Design of VLC-PLC System for Substation Inspection

A kind of integrated network architecture visible light communication (VLC) and power line communication (PLC) is put forward. This architecture is low cost and easy to implement which overcomes the shortcoming of the traditional network architecture. Furthermore, the VLC-PLC integration technology is applied to typical power grid business scene, which is substation intelligent inspection. The business process of master station platform is analyzed. During the intelligent inspection, the VLC-PLC system provides voice communication for on-site inspection personnel and management personnel, and position service. The system can ensure the safety and security of power production.

FINDING THE OPTIMAL LENGTH OF DATA FRAME IN PLC COMPUTER NETWORK

The length of data frame is an important parameter in Medium Access Control(MAC) layer protocol. A method of finding the optimal length of data frame when impulsive disturbance is involved in PowerLine Communications (PLC) is proposed. Having analyzed the characteristics of impulsive disturbance in powerline and the collision mechanism between the disturbance and data frame, this letter gives the function of the network channel utilization with the length of data frame in MAC layer and the impulsive disturbance. Our stochastic process simulation shows that it is feasible to get the optimal length of data frame.

Research and Design on Remote Meter Reading System based on PLC Technology

With the deepened transformation of China＇s power system, the stability and reliability of power utilization have been dramatically improved, but meter reading data acquisition does not keep pace with the times. With the continuous maturity of low-voltage power line communication （PLC）, this leads us to see hopes of using PLC technology to realize remote meter reading. In this paper, based on current PLC technology and combining domestic and foreign successful cases, a beneficial exploration and research is conducted from the composition and establishment of software and the design of software and protocol.

Development of PLC Technology in China

In China there built a large scale of power line communication (Abbr. PLC) testing network. This paper presents the research and development on PLC technology in China and also the application and popularization of PLC in Chinese market. At the end, the next focal points of PLC technology research are deeply discussed.

A Novel Device for Real-Time Monitoring of High Frequency Phenomena in CENELEC PLC Band

This paper proposes the design and development of a novel, portable and low-cost intelligent electronic device (IED) for real-time monitoring of high frequency phenomena in CENELEC PLC band. A high speed floating-point digital signal processor (DSP) along with 4 MSPS analog-to-digital converter (ADC) is used to develop the intelligent electronic device. An optimized algorithm to process the analog signal in real-time and to extract the meaningful result using signal processing techniques has been implemented on the device. A laboratory environment has setup with all the necessary equipment including the development of the load model to evaluate the performance of the IED. Smart meter and concentrator is also connected to the low voltage (LV) network to monitor the PLC communication using the IED. The device has been tested in the laboratory and it has produced very promising results for time domain as well as frequency domain analysis. Those results imply that the IED is fully capable of monitoring high frequency disturbances in CENELEC PLC band.

电力线通信技术分析及应用

介绍了什么是电力线通信技术、世界各国电力线通信技术的发展现状,分析了电力线通信技术的优势及存在的主要问题,最后讨论了电力线通信的应用前景。

基于OFDM的低压电力线通信网络的协议研究

根据国内低压电力线通信网络的实测环境和噪声的分布情况,提出了基于正交频分复用(OFDM)的低压电力线通信网络的物理层参数模型和数据帧传输格式,最后又介绍了一种简单的停等式传输协议用来差错控制和差错恢复。

电力线通信的现状与展望

本文对电力线通信的历史及现状做了简单介绍,分析了电力线传输技术,重点阐述了电力线通信网络的三种组网模式,提出了电力线通信未来的发展目标和面临的主要问题,并相应给出一定的解决思路。