The high bandwidth and low latency of 6G network technology enable the successful application of monocular 3D object detection on vehicle platforms.Monocular 3D-object-detection-based Pseudo-LiDAR is a low-cost,lowpow...The high bandwidth and low latency of 6G network technology enable the successful application of monocular 3D object detection on vehicle platforms.Monocular 3D-object-detection-based Pseudo-LiDAR is a low-cost,lowpower solution compared to LiDAR solutions in the field of autonomous driving.However,this technique has some problems,i.e.,(1)the poor quality of generated Pseudo-LiDAR point clouds resulting from the nonlinear error distribution of monocular depth estimation and(2)the weak representation capability of point cloud features due to the neglected global geometric structure features of point clouds existing in LiDAR-based 3D detection networks.Therefore,we proposed a Pseudo-LiDAR confidence sampling strategy and a hierarchical geometric feature extraction module for monocular 3D object detection.We first designed a point cloud confidence sampling strategy based on a 3D Gaussian distribution to assign small confidence to the points with great error in depth estimation and filter them out according to the confidence.Then,we present a hierarchical geometric feature extraction module by aggregating the local neighborhood features and a dual transformer to capture the global geometric features in the point cloud.Finally,our detection framework is based on Point-Voxel-RCNN(PV-RCNN)with high-quality Pseudo-LiDAR and enriched geometric features as input.From the experimental results,our method achieves satisfactory results in monocular 3D object detection.展开更多
The removal of solid impurities and separation of target products from a fermentation broth is becoming more tedious with the utilization of lignocelluloses as source of substrate.2,3-Butanediol,an important chemical ...The removal of solid impurities and separation of target products from a fermentation broth is becoming more tedious with the utilization of lignocelluloses as source of substrate.2,3-Butanediol,an important chemical used widely is also a main product of sugar-based fermentation carried out by Klebsiella pneumoniae.In this study,we investigated the use of salting-out extraction(SOE) that employed a K2HPO4/ethanol system consisting of 21% ethanol and 17% K2HPO4(mass fraction) to separate 2,3-butanediol from the viscous Jerusalem artichoke-based fermentation broth.After SOE,about 98% of solid matters was removed,and the viscosity decreased from 72.5 mPa s in the original fermentation broth to 4.4 mPa s in the top phase.The partition coefficient and yield of 2,3-butanediol reached 13.4 and 99%,respectively,and 89% of soluble proteins was removed from the broth.The results showed that SOE is an efficient way for isolating 2,3-BD from a highly viscous fermentation broth by removing much of the solid matters within the broth.展开更多
Abstract Ergosterol,（1→3）-α-D-glucan and chitosan are important biomaterials. In this research, a process has been developed to integratively extract ergosterol, （1→3）-α-D-glucan, and chitosan from Penicillium...Abstract Ergosterol,（1→3）-α-D-glucan and chitosan are important biomaterials. In this research, a process has been developed to integratively extract ergosterol, （1→3）-α-D-glucan, and chitosan from Penicillium chrysongenum mycelium. First the mycelia are pretreated with 0.1mol·L^-1 of NaOH. After recovery by centrifugation the solid portion is made to undergo saponification and deacetylation reactaons by addition of 2mol·L^-1 NaOH and et anol.After reaction, extraction is carried out by addition of petroleum ether, which separates the reaction mixture into two phases. The upper layer of petroleum ether contains extracted ergosterol, and the .bottom layer of NaOH solution contains （1→3）-α-DEglucan; the chitosan is on the mycelia residuum. After isolation, the recovery yield of ergosterol is 0.52% of dry mycelium. That of （1→3）-α-D-glucan is about 8.2%; and chitosan is 5.7% with 86% deacetylation. The compositions have been characterized by 1R, HPLC analyses.展开更多
The extraction behavior of rare earths was studied by using paraffin with ceresin as a diluent containing 1-phenyl-3-methyl-4-benzoyl-pyrazolone-5.In solid phase,the composition of complexes is REP_3.The equilib- rium...The extraction behavior of rare earths was studied by using paraffin with ceresin as a diluent containing 1-phenyl-3-methyl-4-benzoyl-pyrazolone-5.In solid phase,the composition of complexes is REP_3.The equilib- rium extraction constants and pH_(1/2) values of solid-liquid extraction are higher than those of normal liquid-liquid extraction.The extraction efficiency tends to maximum when the ratio of phases is 1:1.When the extraction temperature is higher than the melting point of paraffin and the extraction time is over 10 min,the extraction efficiency keeps constant.Moreover,the relationship among separation factor,equilibrium extrac- tion constant,pH_(1/2) value and atomic number was obtained.The mechanism of solid-liquid extraction is analogous to that of liquid-liquid extraction.展开更多
The process based on supercritical fluid extraction for reprocessing of the spent nuclear fuel has some remarkable advantages over the plutonium-uranium extraction(PUREX) process.Especially,it can minimize the generat...The process based on supercritical fluid extraction for reprocessing of the spent nuclear fuel has some remarkable advantages over the plutonium-uranium extraction(PUREX) process.Especially,it can minimize the generation of secondary waste.Dynamic reactive extraction of neodymium oxide(Nd2O3) in supercritical carbon dioxide(SC-CO2) containing tri-n-butyl phosphate-nitric acid(TBP-HNO3) complex was investigated.Temperature showed a positive effect on the extraction efficiency,while pressure showed a negative effect when the unsaturated TBP-HNO3 complex was employed for the dynamic reactive extraction of Nd2O3 in SC-CO2.Both temperature and pressure effects indicated that the kinetic process of the reactive extraction was controlled by the chemical reaction.A kinetic model was proposed to describe the extraction process.展开更多
Solvent extraction of palladium （Ⅱ） from hydrochloric acid solution with 2-n-octyl-4-isothiazolin-3-one （OIT）/cyclohexane was studied. Effects of different parameters on extraction efficiency were evaluated. 99.9...Solvent extraction of palladium （Ⅱ） from hydrochloric acid solution with 2-n-octyl-4-isothiazolin-3-one （OIT）/cyclohexane was studied. Effects of different parameters on extraction efficiency were evaluated. 99.96 % and 98.26 % palladium （Ⅱ） could be effectively extracted with 0.018 mol·L^-1 OIT/cyclohexane of 0.1 and 4.0 mol·L^-1 HCl medium, respectively. Nonpolar solvent and low acidity could improve the extracting efficiency, and successfully strip palladium （Ⅱ） from the loaded organic phase was achieved with 0.5 mol·L^-1 （NH2）2CS solution. It was proposed that the extraction of Pd com-plexes from HCl medium proceeded through the ion-association mechanism by slope method, NMR and FF-IR spectra.展开更多
Extractability and extraction mechanism of lanthanide ions were investigated by using a new extractant,N,Nn,N′,N′-tetrabutyl-3-oxa-diglycolamide(TBDGA),in toluene from nitric acid media.The effects of HNO_3 and TBDG...Extractability and extraction mechanism of lanthanide ions were investigated by using a new extractant,N,Nn,N′,N′-tetrabutyl-3-oxa-diglycolamide(TBDGA),in toluene from nitric acid media.The effects of HNO_3 and TBDGA concentrations,and temperature,on extraction of lanthanide ions were studied.Stoichiometrics of the main extracted species were HNO_3·TBDGA and M(NO_3)_3-3TBDGA(M = Er,Dy,Tb,Gd,La,Ce,Nd,Sm and Eu).The extracted species for metal ions were established to be ionic complex.In this complex,nitrate anion was not coordinated to the central ion.The extraction pattern increased gradually across the lanthanide ions series,showing enhanced affinity of TBDGA toward heavy lanthanide ions.Thermodynamic parameters were investigated for the exothermic extraction reaction.展开更多
In the extraction method for preparing KH2PO4, one of the key processes is the selective extraction of HCI over H3PO4. In our work, extraction kinetic studies have been carried out in a microfluidic device with a coax...In the extraction method for preparing KH2PO4, one of the key processes is the selective extraction of HCI over H3PO4. In our work, extraction kinetic studies have been carried out in a microfluidic device with a coaxial microchannel, using the extractant of 33.3% （by volume） trioctylamine （TOA） dissolved in n-octanol, with differ- ent aqueous phases： the HCI solution, the H3P04 solution, and H3PO4 and KCI solutions of different concentra- tions. The changes of the extraction efficiency of HC1 and H3P04 and the selectivity for HC1 along with the residence time were investigated. We found that fast extraction kinetics could be realized in microfluidic devices, and that HC1 could be extracted faster than H3P04 due to smaller mass transfer resistance and much stronger re- action between HCI and TOA. For the extraction of H3PO4 and KC1 solutions, the selectivity for HC1 first increased and then decreased when TOA was in excess of H3PO4 in the initial feeds, and in contrast, always increased when H3PO4 was in excess of TOA in the initial feeds. The diverse changes of selectivity for HCI along with the residence time indicate that a dynamic control of selectivity in microfluidic devices may be important and accessible for im- proving the KH2P04 conversion efficiency in extraction method.展开更多
1,3-Propanediol,traditionally obtained from fossils,has numerous industrial applications,including use in the production of high performance polymers.The microbial production of 1,3-propanediol presents several opport...1,3-Propanediol,traditionally obtained from fossils,has numerous industrial applications,including use in the production of high performance polymers.The microbial production of 1,3-propanediol presents several opportunities,and the final purity grade determines its price and commercial viability.The development of novel separation technology could improve the economic viability of the bioproduction of 1,3-propanediol.Thus,we investigated salting-out extraction as a novel process for 1,3-propanediol recovery from fermentation broth.Initially,a screening for the best salt/solvent combination was conducted and then optimized using the response surface methodology.The solvents studied were methanol,ethanol,isopropanol and acetone,and the salts examined were K_2HPO_4,Na_2CO_3,K_2CO_3,(NH_4)_2SO_4,NaHPO_4,K_3PO_4 and C_6H_5NaO_7.The optimal extraction system consisted of 34 wt%K_3PO_4,28 wt% ethanol,and 38 wt% fermentation broth containing 23.0 g·L^(-1)1,3-propanediol,which gave the highest partition coefficient of 33 and recovery yield of 97%.The results demonstrated that salting-out extraction was a promising method for 1,3-propanediol recovery from fermentation broth.展开更多
采用高温固相法合成了La_(2)MgTiO_(6)∶Mn^(4+)、La_(2)MgTiO_(6)∶Pr^(3+)、La_(2)MgTiO_(6)∶Pr^(3+),Mn^(4+)单掺杂和双掺杂荧光粉,并通过X射线衍射、扫描电镜、荧光光谱等测试方法对荧光粉的物相结构、形貌和发光特性进行了表征及...采用高温固相法合成了La_(2)MgTiO_(6)∶Mn^(4+)、La_(2)MgTiO_(6)∶Pr^(3+)、La_(2)MgTiO_(6)∶Pr^(3+),Mn^(4+)单掺杂和双掺杂荧光粉,并通过X射线衍射、扫描电镜、荧光光谱等测试方法对荧光粉的物相结构、形貌和发光特性进行了表征及分析。结果表明:成功合成了La_(2)MgTiO_(6)∶Mn^(4+)、La_(2)MgTiO_(6)∶Pr^(3+)、La_(2)MgTiO_(6)∶Pr^(3+),Mn^(4+)荧光粉且均为纯相;样品的粒径为1~2μm;La_(2)MgTiO_(6)∶Mn^(4+)在650~750 nm的红光发射是来自Mn^(4+)的2 E 1→4 A 2跃迁,La_(2)MgTiO_(6)∶Pr^(3+)在红光区域600~660 nm具有强烈的发射,归属为Pr^(3+)的3 P 0→3 H 6和3 P 0→3 F 2跃迁。当Mn^(4+)与Pr^(3+)共同掺杂于La_(2)MgTiO_(6)时,来自Mn^(4+)、Pr^(3+)不同波段的红光发射使荧光粉的发射光谱与植物光敏色素P r与P fr吸收光谱的重叠程度大幅增加,表明Mn^(4+)、Pr^(3+)共掺有效拓宽了La_(2)MgTiO_(6)荧光粉的红光发射区域,更符合植物照明的需求,在LED植物照明领域具有更明显的潜在应用价值。展开更多
文章主要研究了Y_(2)SiO_(5):Pr^(3+)上转换纳米荧光粉对ZnO:Pr^(3+)的光催化性能的影响,通过XRD、FE-SEM、FL和UV-Vis对样品的物相、形貌、发光性能和光催化行性能进行了分析表征,实验结果表明:随着Y_(2)SiO_(5):Pr^(3+)上转换纳米荧...文章主要研究了Y_(2)SiO_(5):Pr^(3+)上转换纳米荧光粉对ZnO:Pr^(3+)的光催化性能的影响,通过XRD、FE-SEM、FL和UV-Vis对样品的物相、形貌、发光性能和光催化行性能进行了分析表征,实验结果表明:随着Y_(2)SiO_(5):Pr^(3+)上转换纳米荧光粉的加入量增加,ZnO:Pr^(3+)光催化效率逐渐提高,当加入0.2 g Y_(2)SiO_(5):Pr^(3+)时,光催化效率最高,在光照60 min后对亚甲基蓝的降解率达到了98.11%,相比未加入Y_(2)SiO_(5):Pr^(3+)时的光催化效率有显著提升。展开更多
Residues of tetracycline antibiotics(TCs) in environments may be harmful to human.Due to their high polarities,it is extremely challenging to efficiently enrich TCs with low concentrations in natural waters for analys...Residues of tetracycline antibiotics(TCs) in environments may be harmful to human.Due to their high polarities,it is extremely challenging to efficiently enrich TCs with low concentrations in natural waters for analysis.In this work,a magnetic metal-organic framework Fe_(3)O_(4)@[Cu_(3)(btc)_(2)]was synthesized and applied as a dispersive micro-solid phase extraction adsorbent for TCs enrichment.Effects of dispersive micro-solid phase extraction conditions including extraction time,solution p H,and elution solvent on the extraction efficiencies of TCs were investigated.Results show that TCs could be enriched efficiently by Fe_(3)O_(4)@[Cu_(3)(btc)_(2)],and electrostatic interaction between TCs and Fe_(3)O_(4)@[Cu_(3)(btc)_(2)]dominated this process.Combined with liquid chromatography-tandem mass spectrometry,four TCs residues (oxytetracycline,tetracycline,chlortetracycline,and doxycycline) in natural waters were determined.The detection limits (LOD,S/N=3) of the four antibiotics were 0.01-0.02μg/L,and the limits of quantitation (LOQ,S/N=10)were 0.04-0.07μg/L.The recoveries obtained from river water and aquaculture water spiked with three TCs concentration levels ranged from 70.3%to 96.5%with relative standard deviations of 3.8%-12.8%.Results indicate that the magnetic metal-organic framework based dispersive micro-solid phase extraction is simple,rapid and high-loading for antibiotics enrichment from water,which further expand the practical application of metal-organic frameworks in sample pretreatment for environmental pollutant analysis.展开更多
基金supported by the National Key Research and Development Program of China(2020YFB1807500)the National Natural Science Foundation of China(62072360,62001357,62172438,61901367)+4 种基金the key research and development plan of Shaanxi province(2021ZDLGY02-09,2023-GHZD-44,2023-ZDLGY-54)the Natural Science Foundation of Guangdong Province of China(2022A1515010988)Key Project on Artificial Intelligence of Xi'an Science and Technology Plan(2022JH-RGZN-0003,2022JH-RGZN-0103,2022JH-CLCJ-0053)Xi'an Science and Technology Plan(20RGZN0005)the Proof-ofconcept fund from Hangzhou Research Institute of Xidian University(GNYZ2023QC0201).
文摘The high bandwidth and low latency of 6G network technology enable the successful application of monocular 3D object detection on vehicle platforms.Monocular 3D-object-detection-based Pseudo-LiDAR is a low-cost,lowpower solution compared to LiDAR solutions in the field of autonomous driving.However,this technique has some problems,i.e.,(1)the poor quality of generated Pseudo-LiDAR point clouds resulting from the nonlinear error distribution of monocular depth estimation and(2)the weak representation capability of point cloud features due to the neglected global geometric structure features of point clouds existing in LiDAR-based 3D detection networks.Therefore,we proposed a Pseudo-LiDAR confidence sampling strategy and a hierarchical geometric feature extraction module for monocular 3D object detection.We first designed a point cloud confidence sampling strategy based on a 3D Gaussian distribution to assign small confidence to the points with great error in depth estimation and filter them out according to the confidence.Then,we present a hierarchical geometric feature extraction module by aggregating the local neighborhood features and a dual transformer to capture the global geometric features in the point cloud.Finally,our detection framework is based on Point-Voxel-RCNN(PV-RCNN)with high-quality Pseudo-LiDAR and enriched geometric features as input.From the experimental results,our method achieves satisfactory results in monocular 3D object detection.
基金Supported by the National High Technology Research and Development Program of China (2009AA05Z443)
文摘The removal of solid impurities and separation of target products from a fermentation broth is becoming more tedious with the utilization of lignocelluloses as source of substrate.2,3-Butanediol,an important chemical used widely is also a main product of sugar-based fermentation carried out by Klebsiella pneumoniae.In this study,we investigated the use of salting-out extraction(SOE) that employed a K2HPO4/ethanol system consisting of 21% ethanol and 17% K2HPO4(mass fraction) to separate 2,3-butanediol from the viscous Jerusalem artichoke-based fermentation broth.After SOE,about 98% of solid matters was removed,and the viscosity decreased from 72.5 mPa s in the original fermentation broth to 4.4 mPa s in the top phase.The partition coefficient and yield of 2,3-butanediol reached 13.4 and 99%,respectively,and 89% of soluble proteins was removed from the broth.The results showed that SOE is an efficient way for isolating 2,3-BD from a highly viscous fermentation broth by removing much of the solid matters within the broth.
基金Supported by the National Natural Science Foundation of China （No.20636010, No.50373003, No.20406002）, Beijing Natural Science Foundation （No.2071002）, and the Special Funds for Major State Basic Research Program of China （973 Program, No.2007CB714305）.
文摘Abstract Ergosterol,（1→3）-α-D-glucan and chitosan are important biomaterials. In this research, a process has been developed to integratively extract ergosterol, （1→3）-α-D-glucan, and chitosan from Penicillium chrysongenum mycelium. First the mycelia are pretreated with 0.1mol·L^-1 of NaOH. After recovery by centrifugation the solid portion is made to undergo saponification and deacetylation reactaons by addition of 2mol·L^-1 NaOH and et anol.After reaction, extraction is carried out by addition of petroleum ether, which separates the reaction mixture into two phases. The upper layer of petroleum ether contains extracted ergosterol, and the .bottom layer of NaOH solution contains （1→3）-α-DEglucan; the chitosan is on the mycelia residuum. After isolation, the recovery yield of ergosterol is 0.52% of dry mycelium. That of （1→3）-α-D-glucan is about 8.2%; and chitosan is 5.7% with 86% deacetylation. The compositions have been characterized by 1R, HPLC analyses.
文摘The extraction behavior of rare earths was studied by using paraffin with ceresin as a diluent containing 1-phenyl-3-methyl-4-benzoyl-pyrazolone-5.In solid phase,the composition of complexes is REP_3.The equilib- rium extraction constants and pH_(1/2) values of solid-liquid extraction are higher than those of normal liquid-liquid extraction.The extraction efficiency tends to maximum when the ratio of phases is 1:1.When the extraction temperature is higher than the melting point of paraffin and the extraction time is over 10 min,the extraction efficiency keeps constant.Moreover,the relationship among separation factor,equilibrium extrac- tion constant,pH_(1/2) value and atomic number was obtained.The mechanism of solid-liquid extraction is analogous to that of liquid-liquid extraction.
基金Supported by the National Natural Science Foundation of China （20506014）.
文摘The process based on supercritical fluid extraction for reprocessing of the spent nuclear fuel has some remarkable advantages over the plutonium-uranium extraction(PUREX) process.Especially,it can minimize the generation of secondary waste.Dynamic reactive extraction of neodymium oxide(Nd2O3) in supercritical carbon dioxide(SC-CO2) containing tri-n-butyl phosphate-nitric acid(TBP-HNO3) complex was investigated.Temperature showed a positive effect on the extraction efficiency,while pressure showed a negative effect when the unsaturated TBP-HNO3 complex was employed for the dynamic reactive extraction of Nd2O3 in SC-CO2.Both temperature and pressure effects indicated that the kinetic process of the reactive extraction was controlled by the chemical reaction.A kinetic model was proposed to describe the extraction process.
基金financially supported by the National Natural Science Foundation of China(No.21271073)
文摘Solvent extraction of palladium （Ⅱ） from hydrochloric acid solution with 2-n-octyl-4-isothiazolin-3-one （OIT）/cyclohexane was studied. Effects of different parameters on extraction efficiency were evaluated. 99.96 % and 98.26 % palladium （Ⅱ） could be effectively extracted with 0.018 mol·L^-1 OIT/cyclohexane of 0.1 and 4.0 mol·L^-1 HCl medium, respectively. Nonpolar solvent and low acidity could improve the extracting efficiency, and successfully strip palladium （Ⅱ） from the loaded organic phase was achieved with 0.5 mol·L^-1 （NH2）2CS solution. It was proposed that the extraction of Pd com-plexes from HCl medium proceeded through the ion-association mechanism by slope method, NMR and FF-IR spectra.
基金supported by the National Natural Science Foundation of China(21077044)Natural Science Foundation of Shandong Province(ZR2015BM030)
文摘Extractability and extraction mechanism of lanthanide ions were investigated by using a new extractant,N,Nn,N′,N′-tetrabutyl-3-oxa-diglycolamide(TBDGA),in toluene from nitric acid media.The effects of HNO_3 and TBDGA concentrations,and temperature,on extraction of lanthanide ions were studied.Stoichiometrics of the main extracted species were HNO_3·TBDGA and M(NO_3)_3-3TBDGA(M = Er,Dy,Tb,Gd,La,Ce,Nd,Sm and Eu).The extracted species for metal ions were established to be ionic complex.In this complex,nitrate anion was not coordinated to the central ion.The extraction pattern increased gradually across the lanthanide ions series,showing enhanced affinity of TBDGA toward heavy lanthanide ions.Thermodynamic parameters were investigated for the exothermic extraction reaction.
基金Supported by the National Natural Science Foundation of China(91334201)
文摘In the extraction method for preparing KH2PO4, one of the key processes is the selective extraction of HCI over H3PO4. In our work, extraction kinetic studies have been carried out in a microfluidic device with a coaxial microchannel, using the extractant of 33.3% （by volume） trioctylamine （TOA） dissolved in n-octanol, with differ- ent aqueous phases： the HCI solution, the H3P04 solution, and H3PO4 and KCI solutions of different concentra- tions. The changes of the extraction efficiency of HC1 and H3P04 and the selectivity for HC1 along with the residence time were investigated. We found that fast extraction kinetics could be realized in microfluidic devices, and that HC1 could be extracted faster than H3P04 due to smaller mass transfer resistance and much stronger re- action between HCI and TOA. For the extraction of H3PO4 and KC1 solutions, the selectivity for HC1 first increased and then decreased when TOA was in excess of H3PO4 in the initial feeds, and in contrast, always increased when H3PO4 was in excess of TOA in the initial feeds. The diverse changes of selectivity for HCI along with the residence time indicate that a dynamic control of selectivity in microfluidic devices may be important and accessible for im- proving the KH2P04 conversion efficiency in extraction method.
基金CNPq,FAPERJ and CAPES through the PDSE and Program and Human Resources Program 13 of the National Petroleum Agency (ANP-PRH 13)
文摘1,3-Propanediol,traditionally obtained from fossils,has numerous industrial applications,including use in the production of high performance polymers.The microbial production of 1,3-propanediol presents several opportunities,and the final purity grade determines its price and commercial viability.The development of novel separation technology could improve the economic viability of the bioproduction of 1,3-propanediol.Thus,we investigated salting-out extraction as a novel process for 1,3-propanediol recovery from fermentation broth.Initially,a screening for the best salt/solvent combination was conducted and then optimized using the response surface methodology.The solvents studied were methanol,ethanol,isopropanol and acetone,and the salts examined were K_2HPO_4,Na_2CO_3,K_2CO_3,(NH_4)_2SO_4,NaHPO_4,K_3PO_4 and C_6H_5NaO_7.The optimal extraction system consisted of 34 wt%K_3PO_4,28 wt% ethanol,and 38 wt% fermentation broth containing 23.0 g·L^(-1)1,3-propanediol,which gave the highest partition coefficient of 33 and recovery yield of 97%.The results demonstrated that salting-out extraction was a promising method for 1,3-propanediol recovery from fermentation broth.
文摘采用高温固相法合成了La_(2)MgTiO_(6)∶Mn^(4+)、La_(2)MgTiO_(6)∶Pr^(3+)、La_(2)MgTiO_(6)∶Pr^(3+),Mn^(4+)单掺杂和双掺杂荧光粉,并通过X射线衍射、扫描电镜、荧光光谱等测试方法对荧光粉的物相结构、形貌和发光特性进行了表征及分析。结果表明:成功合成了La_(2)MgTiO_(6)∶Mn^(4+)、La_(2)MgTiO_(6)∶Pr^(3+)、La_(2)MgTiO_(6)∶Pr^(3+),Mn^(4+)荧光粉且均为纯相;样品的粒径为1~2μm;La_(2)MgTiO_(6)∶Mn^(4+)在650~750 nm的红光发射是来自Mn^(4+)的2 E 1→4 A 2跃迁,La_(2)MgTiO_(6)∶Pr^(3+)在红光区域600~660 nm具有强烈的发射,归属为Pr^(3+)的3 P 0→3 H 6和3 P 0→3 F 2跃迁。当Mn^(4+)与Pr^(3+)共同掺杂于La_(2)MgTiO_(6)时,来自Mn^(4+)、Pr^(3+)不同波段的红光发射使荧光粉的发射光谱与植物光敏色素P r与P fr吸收光谱的重叠程度大幅增加,表明Mn^(4+)、Pr^(3+)共掺有效拓宽了La_(2)MgTiO_(6)荧光粉的红光发射区域,更符合植物照明的需求,在LED植物照明领域具有更明显的潜在应用价值。
文摘文章主要研究了Y_(2)SiO_(5):Pr^(3+)上转换纳米荧光粉对ZnO:Pr^(3+)的光催化性能的影响,通过XRD、FE-SEM、FL和UV-Vis对样品的物相、形貌、发光性能和光催化行性能进行了分析表征,实验结果表明:随着Y_(2)SiO_(5):Pr^(3+)上转换纳米荧光粉的加入量增加,ZnO:Pr^(3+)光催化效率逐渐提高,当加入0.2 g Y_(2)SiO_(5):Pr^(3+)时,光催化效率最高,在光照60 min后对亚甲基蓝的降解率达到了98.11%,相比未加入Y_(2)SiO_(5):Pr^(3+)时的光催化效率有显著提升。
基金supported by the National Natural Science Foundation of China(No.21607003).
文摘Residues of tetracycline antibiotics(TCs) in environments may be harmful to human.Due to their high polarities,it is extremely challenging to efficiently enrich TCs with low concentrations in natural waters for analysis.In this work,a magnetic metal-organic framework Fe_(3)O_(4)@[Cu_(3)(btc)_(2)]was synthesized and applied as a dispersive micro-solid phase extraction adsorbent for TCs enrichment.Effects of dispersive micro-solid phase extraction conditions including extraction time,solution p H,and elution solvent on the extraction efficiencies of TCs were investigated.Results show that TCs could be enriched efficiently by Fe_(3)O_(4)@[Cu_(3)(btc)_(2)],and electrostatic interaction between TCs and Fe_(3)O_(4)@[Cu_(3)(btc)_(2)]dominated this process.Combined with liquid chromatography-tandem mass spectrometry,four TCs residues (oxytetracycline,tetracycline,chlortetracycline,and doxycycline) in natural waters were determined.The detection limits (LOD,S/N=3) of the four antibiotics were 0.01-0.02μg/L,and the limits of quantitation (LOQ,S/N=10)were 0.04-0.07μg/L.The recoveries obtained from river water and aquaculture water spiked with three TCs concentration levels ranged from 70.3%to 96.5%with relative standard deviations of 3.8%-12.8%.Results indicate that the magnetic metal-organic framework based dispersive micro-solid phase extraction is simple,rapid and high-loading for antibiotics enrichment from water,which further expand the practical application of metal-organic frameworks in sample pretreatment for environmental pollutant analysis.
