Preparation methods,biological activities,and potential applications of marine algae oligosaccharides:a review

Marine algae are valuable sources of health-promoting molecules that have been consumed by Asians for decades.Among aquatic flora,marine algae stand out in terms of high content of marine algae polysaccharides(MAP)such as carrageenan,alginate,fucoidan,laminaran,agarose,rhamnan,and ulvan.When hydrolyzed,MAP generate marine algae oligosaccharides(MAO),which have attracted interest in recent years due to their superior solubility compared with MAP.Besides,MAO have been demonstrated numerous biological activities including antioxidant,antidiabetic,anti-inflammatory,antimicrobial,and prebiotic activities.Thus,this review summarizes the main chemical classes of MAO,their sources,and the main processes used for their production(i.e.,physical,chemical,and biological methods),coupled with a discussion of the advantages and disadvantages of these methods.Highlights of the biological activities of MAO and their potential applications in food,nutraceutical,and pharmaceuticals would also be discussed and summarized.

Methanation of carbon dioxide on Ni/ZrO_2-Al_2O_3 catalysts:Effects of ZrO_2 promoter and preparation method of novel ZrO_2-Al_2O_3 carrier

The novel nickel-based catalysts with a nickel content of 12 wt% were prepared with the zirconia-alumina composite as the supports. The new carriers, ZrO2 improved alumina, were synthesized by three methods, i.e., impregnation-precipitation, co-precipitation, and impregnation method. The catalytic properties of these catalysts were investigated in the methanation of carbon dioxide, and the samples were characterized by X-ray diffraction （XRD）, X-ray photoelectron spectroscope （XPS）, temperature-programmed reduction （TPR） and temperature-programmed desorption （TPD） techniques. The new catalysts showed higher catalytic activity and better stability than Ni/γ-Al2O3. Furthermore, as a support for new nickel catalyst, the ZrO2-Al2O3 composite prepared by the impregnation-precipitation method was more efficient than the other supports in the methanation of carbon dioxide. The highly dispersed zirconium oxide on the surface of γ-Al2O3 inhibited the formation of nickel aluminate-like phase, which was responsible for the better dispersion of Ni species and easier reduction of NiO species, leading to the enhanced catalytic performance of corresponding catalyst.

Influence of preparation method on performance of a metal supported perovskite catalyst for combustion of methane

A different method was employed for the preparation of a metal supported perovskite catalyst for the catalytic combustion of methane.The prepared metallic catalysts were characterized by means of X-ray diffractometer(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM),and also by ultrasonic and thermal shock tests and catalytic activity.It was found that the process factors during the preparation,e.g.the preparation of the catalyst precursor and the coating slurry,the calcination te...

Influence of preparation methods on CuO-CeO_2 catalysts in the preferential oxidation of CO in excess hydrogen

Influence of three different preparation methods, i.e. impregnation, coprecipitation, and inverse coprecipitation, on the preferential oxidation of CO in excess hydrogen （PROX） over CuO-CeO2 catalysts has been investigated and CuO-CeO2 catalysts are characterized using BET, XPS, XRD, UV Raman, and TPR techniques. The results show that the catalysts prepared by coprecipitation have smaller particle sizes, well-dispersed CuOx species, more oxygen vacancies, and are more active in the PROX than those prepared by the other methods. However. the inverse coprecipitation depresses the catalytic performance of CuO-CeO2 catalysts and causes the growth of CuO-CeO2 because of different pH value in the precipitation process.

Effect of Preparation Methods of Bi_(2)O_(3) Nanoparticles on their Photocatalytic Activity

Bi 2O 3 nanoparticles were prepared by means of ammonia precipitation, polyol mediated methods and microemulsion chemical method. The structure and properties of the as-prepared nanoparticles, having been submitted to a heat-treatment test at 750 ℃, were characterized by means of XRD, BET, XPS and UV-Vis absorption techniques. The photocatalytic oxidation reactions of benzene, toluene and xylene were used as the model reaction to measure the photocatalytic activity of Bi 2O 3 nanoparticles, respectively. The results show that the crystallite size of Bi 2O 3 prepared with different methods and calcined at 750 ℃ were 50.6, 38.5 and 31.5 nm, respectively. The photocatalytic activity of Bi 2O 3 nanoparticles prepared with the microemulsion chemical method was higher than that of the particles prepared with the polyol mediated method; and that of the particles prepared with the micromulsion chemical method was the highest among the three. The degradation rates of the three pollutants xylene, toluene and benzene decreased in sequence.

Effect of preparation methods on the hydrocracking performance of NiMo/Al_(2)O_(3) catalysts

In this work,NiMo catalysts with various contents of MoO_(3)were prepared through incipient wetness impregnation by a twostep method(NMxA)and onepot method(NMxB).The catalysts were then characterized by XRD,XPS,NH3TPD,H_(2)TPR,HRTEM,and N_(2)adsorptiondesorption technologies.The performance of the NiMo/Al_(2)O_(3) catalysts was investigated by hydrocracking lowtemperature coal tar.When the MoO3 content was 15 wt%,the interaction between Ni species and Al_(2)O_(3) on the NM15B catalyst was stronger than that on the NM15A catalyst,resulting in the poor performance of the former.When the MoO^(3) content was 20 wt%,MoO_(3) agglomerated on the surface of the NM20A catalyst,leading to decreased number of active sites and specific surface area and reduced catalytic performance.The increase in the number of MoS_(2) stack layers strengthened the interaction between Ni and Mo species of the NM20B catalyst and consequently improved its catalytic performance.When the MoO_(3) content reached 25 wt%,the active metals agglomerated on the surface of the NiMo catalysts,thereby directly decreasing the number of active sites.In conclusion,the twostep method is suitable for preparing catalysts with large pore diameter and low MoO_(3) content loading,and the onepot method is more appropriate for preparing catalysts with large specific surface area and high MoO_(3) content.Moreover,the NMxA catalysts had larger average pore diameter than the NMxB catalysts and exhibited improved desulfurization performance.

Classification of Preparation Methods and Wearability of Smart Textiles

In recent years,smart textiles have attracted the attention of scholars from all walks of life,but there is an imbalance between functionality and usability,which affects their marketization process.Firstly,five representative smart textiles are introduced and their respective wearability is described around preparation methods.Secondly,it is concluded that the preparation methods of smart textiles can be divided into two categories:fiber methods and finishing methods.The fiber methods refer to making smart fibers into smart textiles.Textiles made by fiber methods are breathable and feel good in the hand,but the mechanical properties are influenced by the production equipment,and the process cost is high.The finishing methods refer to the functional finishing of ordinary textiles.Although the finishing method is simple and convenient,it may reduce the comfort of the textile.Finally,applications and new research in various fields of smart textiles are presented with promising prospects.It is anticipated that this review will serve as a theoretical basis for future research and development of smart textiles.Researchers are expected to create new technologies to overcome the tension between functionality and usability,as well as to increase user comfort and convenience.

Recent Advances on Preparation Method of Ti-Based Hydrogen Storage Alloy

Ti-based hydrogen storage alloy is one of the most common solid-state hydrogen storage materials due to its high hydrogen absorption capacity, low dehydrogenation temperature and rich resources. This paper mainly presents the influence of several different preparation methods of Ti-based hydrogen storage alloys on the hydrogen storage performance including traditional preparation methods (smelting, rapid quenching and mechanical alloying) and novel methods by plastic deformation (cold rolling, equal channel angular pressing and high-pressure torsion). The microstructure analysis and hydrogen storage properties of Ti-based alloy are summarized thoroughly corresponding with the preparation processes mentioned above. It was found that slight introduction of lattice defects including dislocation, grain boundary, sub-grain boundary and cracks by severe plastic deformation (SPD) was beneficial to improve the hydriding/dehydriding kinetic characteristic. However, the nonuniform composition and residual stress of the alloy may be caused by SPD, which is not conducive to the improvement of hydrogen storage capacity. In the future, it would be expected that new methods and technologies combined with dopant and modification are applied to Ti-based hydrogen storage alloys to make breakthroughs in practical application.

Edge preparation methods for cutting tools:a review

Edge preparation can remove cutting edge defects,such as burrs,chippings,and grinding marks,generated in the grinding process and improve the cutting performance and service life of tools.Various edge preparation methods have been proposed for different tool matrix materials,geometries,and application requirements.This study presents a scientific and systematic review of the development of tool edge preparation technology and provides ideas for its future development.First,typical edge characterization methods,which associate the microgeometric characteristics of the cutting edge with cutting performance,are briefly introduced.Then,edge preparation methods for cutting tools,in which materials at the cutting edge area are removed to decrease defects and obtain a suitable microgeometry of the cutting edge for machining,are discussed.New edge preparation methods are explored on the basis of existing processing technologies,and the principles,advantages,and limitations of these methods are systematically summarized and analyzed.Edge preparation methods are classified into two categories:mechanical processing methods and nontraditional processing methods.These methods are compared from the aspects of edge consistency,surface quality,efficiency,processing difficulty,machining cost,and general availability.In this manner,a more intuitive understanding of the characteristics can be gained.Finally,the future development direction of tool edge preparation technology is prospected.

Design,preparation,application of advanced array structured materials and their action mechanism analyses for high performance lithium-sulfur batteries

Lithium-sulfur battery(LSB)has brought much attention and concern because of high theoretical specific capacity and energy density as one of main competitors for next-generation energy storage systems.The widely commercial application and development of LSB is mainly hindered by serious“shuttle effect”of lithium polysulfides(Li PSs),slow reaction kinetics,notorious lithium dendrites,etc.In various structures of LSB materials,array structured materials,possessing the composition of ordered micro units with the same or similar characteristics of each unit,present excellent application potential for various secondary cells due to some merits such as immobilization of active substances,high specific surface area,appropriate pore sizes,easy modification of functional material surface,accommodated huge volume change,enough facilitated transportation for electrons/lithium ions,and special functional groups strongly adsorbing Li PSs.Thus many novel array structured materials are applied to battery for tackling thorny problems mentioned above.In this review,recent progresses and developments on array structured materials applied in LSBs including preparation ways,collaborative structural designs based on array structures,and action mechanism analyses in improving electrochemical performance and safety are summarized.Meanwhile,we also have detailed discussion for array structured materials in LSBs and constructed the structure-function relationships between array structured materials and battery performances.Lastly,some directions and prospects about preparation ways,functional modifications,and practical applications of array structured materials in LSBs are generalized.We hope the review can attract more researchers'attention and bring more studying on array structured materials for other secondary batteries including LSB.

Analysis and discussion of different methods of artificial ice-high specimen preparation

Because ice-high foundation soil is widely distributed in permafrost regions,the correct preparation of ice-high specimens is of critical interest in engineering design for foundation stability.Past research has shown that the uniaxial compression strength of ice-high frozen soils changes as the ice or total water content increases; the differences of different methods of specimen preparation are analyzed here and the advantages and disadvantages of them are presented.It is confirmed that the role of crushed ice is significantly different from that of naturally frozen ice in frozen soils,and the size and amount of crushed ice will influence the strength and deformation mechanism of frozen soils.Therefore,it is strongly recommended that when a ice-high specimen is artificially prepared,the ice should be frozen through natural means and not be replaced with crushed ice.

A Novel Method of the Preparation ofChemically Modified Electrodes

ＡＮｏｖｅｌＭｅｔｈｏｄｏｆｔｈｅＰｒｅｐａｒａｔｉｏｎｏｆＣｈｅｍｉｃａｌｌｙＭｏｄｉｆｉｅｄＥｌｅｃｔｒｏｄｅｓＬＩＧｅｎ－ｘｉ，ＬＩＡＯＸｉａｎｇ－ｍｉｎ，ＦＡＮＧＨｕｉ－ｑｕｎａｎｄＣＨＥＮＨｏｎｇ－ｙｕａｎ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍ...

Influence of nanosized magnesia on the hydration of borehole-sealing cements prepared using different methods

Gas drainage is an efective technology for gas control in coal mines.A high borehole-sealing quality is the fundamental precondition for efcient gas drainage.The expansibilities of cement pastes used in borehole-sealing processes are critical for the borehole-sealing efect.Nanosized magnesia expansive agents are used to improve the expansibilities of cement pastes and improve the borehole-sealing efect.Nuclear magnetic resonance spectrometry and scanning electron microscopy were adopted to study the efects of nanosized magnesia on the hydration of borehole-sealing cements used with diferent preparation methods.The results showed that an increase in the mass fraction of the nanosized magnesia promoted cement hydration,and the mass fraction was positively correlated with the promotion efect.The use of diferent preparation methods did not change the water-phase distribution in the cement.When using the wet-mixing preparation method,nanosized magnesia promoted the induction,acceleration,and deceleration periods of hydration;when using the dry-mixing preparation method,the nanosized magnesia promoted the induction period of cement hydration,and the promotion efect was less obvious than that seen when using the wet-mixing method.When using the wet-mixing preparation method,the nanosized magnesia was uniformly dispersed,thus enlarging the surface area of the reaction,which provided more nucleation sites for the hydration products of the cement and therefore accelerated the hydration reaction.When using the dry-mixing preparation method,the nanosized magnesia powders were dispersed nonuniformly and aggregated.Under these conditions,only a few nanosized magnesia particles on the surfaces of the aggregated clusters took part in hydration,so only a small number of nucleation sites were provided for the hydration products of cement.This led to inconsistent hydration of cement pastes prepared using the dry-mixing method.The surface porosity of the cement prepared with the wet-mixing preparation method frst decreased and then increased with increases in the mass fraction of the nanosized magnesia.The cement surface exhibited compact hydration products and few pores,and the surface was relatively smooth.In comparison,the surface porosity of the cement prepared using the dry-mixing method fuctuated with increasing mass fraction of the nanosized magnesia,resulting in a rough cement surface and microfractures on some surfaces.The two preparation methods both reduced the surface porosity of the cement.The wet-mixing preparation was more efective and consistent in improving the compactness of the cement than the dry-mixing preparation.These results provide important guidance on the addition of nanosized magnesia in borehole-sealing engineering and the selection of cement preparation methods,and they also lay a solid foundation for realizing safe and efcient gas drainage.

New preparation method for halogenated ethanes and methanes via base-catalyzed halogen dance

Although literature abounds with examples of formation of perhaloalkanes by photo-lytic or Lewis-acid induced halogen exchange reactions involving radical or carbocationintermediates,the procedures are seldom applicable to the preparation of perhaloalkanes ingood yields under mild conditions.Recently,we have reported the spontaneous reactionsof some perhalofluoroalkanes with various types of nucleophiles.All these reactions areinitiated by the halophilic attack of nucleophiles on C—Br or C—Cl bonds,followed byanionic chain steps involving carbanion as well as olefin intermediates.Notably,the latter areformed after the β-elimination of a good leaving group from the former.On the other hand,it is well known that halogenated carbanions can effectively make halophilic attacks on theC—X bonds of other halogenated substrates,e.g.,in the“halogen dance”of Bunnett.There-

PREPARATION OF TiO_2 THIN FILMS BY MOCVD METHOD

Preparation of TiO2 thin films by MOCVD method is presented in this paper. A MOCVD system has been designed and built. A wide range of processing conditions are investigated to deposit TiO2 films on Si wafers starting from metal-organic precursor tetrabutyl titanate. Activation energy of the film formation （E） is obtained to be 23.6 kJ/mol. Structure of films is pure anatase when deposit temperatures are low, rutile forms at 700℃. The films also exhibit preferred crystallographic orientations which strongly depend on deposit conditions. Refractive index increases with increasing of film thickness and decreasing of deposit temperature.

A NEW METHOD FOR THE PREPARATION OF PHENOLS AND ITS DERIVATIVES

a-Oxo ketene dithioacetals 2 via 1,2-nucleophilie addition by methallyl magnesius chloride afforded corresponding alcohols (3). Treated with water or methanol and catalyzed by Lewis acid, the alcohols 3 were converted regiospecifical ly to substituted phenols 5' or related phenol methyl ethers 5 respectively. This reaction is a novel approach to the synthesis of phenols and their derivatives starting from non-aromatic precursors.

Effect of preparation method of noble metal supported catalyts on formaldehyde oxidation at room temperature: Gas or liquid phase reduction

Formaldehyde(HCHO) is toxic to the human body and is one of the main threats to the indoor air quality(IAQ). As such, the removal of HCHO is imperative to improving the IAQ,whereby the most useful method to effectively remove HCHO at room temperature is catalytic oxidation. This review discusses catalysts for HCHO room-temperature oxidation,which are categorized according to their preparation methods, i.e., gas-phase reduction and liquid-phase reduction methods. The HCHO oxidation performances, structural features,and reaction mechanisms of the different catalysts are discussed, and directions for future research on catalytic oxidation are reviewed.

A Method for Preparation of Ordered Porous Silicon Based on a 2D SiO_2 Template

A new method for fabricating ordered porous silicon is reported. A two-dimensional silica nanosphere array is used as a template with a hydrofluoric acid-hydrogen peroxide solution for etching the nanospheres. The initial diameter and distribution of the holes in the resulting porous silicon layer are determined by the size and distribution of the silica nanospheres. The corrosion time can be used to control the depths of the holes. It is found that the presence of a SiO2 layer, formed by the oxidation of the rough internal surface of the hole, is the primary reason allowing the corrosion to proceed. Ultraviolet reflection and thermal conductivity measurements show that the diameter and distribution of the holes have a great influence on properties of the porous silicon.

A MODIFIED METHOD FOR THE PREPARATION OF GOETHITE

Synthetic goethite(α-FeOOH) was prepared in the laboratory using a modified version of Brauer's method.The process of steam-crystallization was prolonged and impurities were removed by dialysis.The products have been characterised by Surface Area Analyser and Scanning Electron Microscope, and proved to have larger Specific Surface Area than that in literature.