Review:Layer⁃Number Controllable Preparation of High⁃Quality Graphene for Wide Applications

Graphene, a well-known two-dimensional(2 D) material, has sparked broad enthusiasm in both scientific and industrial communities in these years, due to its exceptional electrical, thermal, mechanical, and versatile properties. However, many properties and applications of graphene are layer-number dependent. The preparation of high-quality graphene with controlled layer numbers is full of challenge, since the layer number varies much with the synthesis routes and relevant experimental conditions. Hence, there is an urgent need to improve the layer-number controllability of graphene preparation. Generally, graphene can be prepared by two complementary approaches: "top-down" and "bottom-up". Since they have their own advantages, the recent advances in the layer-number tunable preparation of high-quality graphene are separately studied from the two aspects in this review, especially those dedicated to single parameter. Some effective strategies are discussed in detail, mainly including 1) supercritical-CO2 assisted sonication, electrochemical exfoliation of graphite intercalation compounds, and layer-by-layer thinning with plasma or laser, for "top-down" graphene;2) chemical vapor deposition(CVD) on dual-metal substrate, ion-implantation CVD, layer-by-layer CVD, plasma-enhanced CVD, layered-double-hydroxides template-assisted CVD;and 3) graphite-enclosure assisted epitaxial growth and pulsed-magnetron-sputtering assisted physical vapor deposition for "bottom-up" graphene on various substrates. In addition, the respective advantages of graphene with different layer numbers in properties and applications are also presented. Finally, the contribution concludes with some important perspectives on the remained challenges and future perspectives.

Study on Preparation Process and Quality Standard of Tianlu Tongluo Granules

[Objectives]This study was conducted to optimize the preparation process of Tianlu Tongluo Granules and establish its quality standard.[Methods]Tianlu Tongluo Granules was prepared by an orthogonal test.TLC was used to identify Radix Astragali preparata,Radix Paeoniae Alba,Scutellariae Radix and Acori Tatarinowii Rhizoma in the granules,and the content of paeoniflorin in the finished product was determined by HPLC.[Results]The extraction process of Tianlu Tongluo Granules was as follows:adding 6 times of water,and decocting twice,1 h/time.In the forming process,the optimal ratio of thick paste to excipients as 10∶8.6,and the optimal ratio of excipients dextrin:starch:colloidal silicon dioxide was 6.5∶0.5∶1.6.The results showed that TLC spots were obvious,the separation was significant,and the specificity was strong.The paeoniflorin content had a good linear relationship in the concentration range of 5.9048-590.48 mg/L(r=0.9999).The average sample recovery was 101.10%,and the RSD was 1.18%.[Conclusions]The preparation process is stable and reasonable,and the established quality control method is specific and reproducible,and can be used for the quality control of Tianlu Tongluo Granules.

Intelligent Control and Maintenance Man-agement Integrated System Based on Multi-Agents for Coal-Preparation Plant

This paper discusses the progress of computer integrated processing （CIPS） of coal-preparation and then preserits an intelligence controlled production-process, device-maintenance and production-management system of coal- preparation based on multi-agents （IICMMS-CP）. The construction of the IICMMS-CP, the distributed network control system based on live intelligence control stations and the strategy of implementing distributed intelligence control system are studied in order to overcome the disadvantages brought about by the wide use of the PLC system by coaipreparation plants. The software frame, based on a Multi-Agent Intelligence Control and Maintenance Management integrated system, is studied and the implemention methods of IICMMS-CP are discussed. The characteristics of distributed architecture, cooperation and parallel computing meet the needs of integrated control of coal-preparation plants with large-scale spatial production distribution, densely-related processes and complex systems. Its application further improves the reliability and precision of process control, accuracy of fault identification and intelligence of production adjustment, establishes a technical basis for system integration and flexible production. The main function of the system has been tested in a coal-preparation plant to good effect in stabilizing product quality, improving efficiency and reducing consumption.

Preparation of Potato Whole Flour and Its Effects on Quality of Flour Products: A Review

When harvested the potato has a high moisture content, this could make its transportation and storage difficult. To help solve the transportation difficulties, potato is made into whole flour by many food processing companies. Potato whole flour has high nutritional value and may be regarded as beneficial to human health and fitness. In addition to the direct use of potato whole flour,it can also be used as added ingredients into other food products. This study summarizes and analyzes the processing technology of potato whole flour and its application in noodle products.

VPLS Based Quality and Cost Control for Tennessee Eastman Process

Product quality and operation cost control obtain increasing emphases in modern chemical system engineering. To improve the fault detection power of the partial least square (PLS) method for quality control, a new QRPV statistic is proposed in terms of the VP (variable importance in projection) indices of monitored process variables, which is significantly advanced over and different from the conventional Q statistic. QRPV is calculated only by the residuals of the remarkable process variables (RPVs). Therefore, it is the dominant relation between quality and RPV not all process variables (as in the case of the conventional PLS) that is monitored by this new VP-PLS (VPLS) method. The combination of QRPV and T2 statistics is applied to the quality and cost control of the Tennessee Eastman (TE) process, and weak faults can be detected as quickly as possible. Consequently, the product quality of TE process is guaranteed and operation costs are reduced.

Optimization of Quality Control Method and Ethanol Extraction Process of Psoralen and Bergapten in Ficus pandurata

[Objectives]To establish a qualitative identification and content determination method for psoralen and bergapten in the roots and leaves of Ficus pandurata,and the multi-indicator scoring method to optimize the ethanol extraction process for the effective parts of F.pandurata.[Methods]Qualitative identification was carried out by thin-layer chromatography(TLC)and content determination was made by high-performance liquid chromatography(HPLC);the content of psoralen and bergapten and extract yield were used as indicators,to investigate the effects of ethanol volume fraction,solid-to-liquid ratio,extraction time and extraction times on the ethanol extraction process of F.pandurata;multi-indicator scoring method was adopted,orthogonal test method was designed to optimize the extraction process,and verification test was performed.[Results]TLC chart of F.pandurata shows clear spots and good separation;the detected concentrations of psoralen and bergapten in the roots are in the range of 1.02-32.64μg/mL and shows a good linear relationship with the peak area(r=0.9997);these components have not been detected in the leaves,and the precision,RSD of stability and repeatability test is less than 2%;the average recovery rate was 99.8%-100.2%,and the RSD value is 1.12%-1.13%(n=6);the optimized extraction process is to use 50%ethanol as the extraction solvent,the solid-to-liquid ratio of 1∶10,reflux extraction of 3 times,and 1.5 h each time;the results of the three batches of verification tests show that the content of the two indicator components obtained is high,and the average value of the total amount is 0.34 mg/g(RSD=0.30%,n=3).[Conclusions]The established quality control method for F.pandurata is simple,easy,accurate and reproducible;the preferred extraction process is stable and feasible,suitable for the extraction and purification of coumarin effective parts in F.pandurata roots,so it is expected to provide references for further development of F.pandurata.

Study on Quality and Safety Trust Early Warning of Dairy Products Based on Statistical Process Control

In order to solve such problems as lack of dynamic evaluation system in evaluation of quality and safety trust of dairy products,and weak awareness of prevention,it is necessary to introduce the statistical process control into the quality and safety trust evaluation system of dairy products,and establish quality and safety trust early warning model for dairy products,so as to determine the control limit of control chart and carry out early warning according to eight criteria. According to the empirical results,the statistical process control is helpful for finding the hidden process risks and providing the necessary basis for enterprises taking positive measures to raise the confidence of consumers.

Application of Statistical Process Control for Setting Action Thresholds as Quality Assurance of Dose Verifications in External Beam Radiotherapy

Purpose: To test the concept of Statistical Process Control (SPC) as a Quality Assurance (QA) procedure for dose verifications in external beam radiation therapy in conventional and 3D Conformal Radiotherapy (3D-CRT) treatment of cervical cancer. Materials and Methods: A study of QA verification of target doses of 198 cervical cancer patients undergoing External Beam Radiotherapy (EBRT) treatments at two different cancer treatment centers in Kenya was conducted. The target doses were determined from measured entrance doses by the diode in vivo dosimetry. Process Behavior Charts (PBC) developed by SPC were applied for setting Action Thresholds (AT) on the target doses. The AT set was then proposed as QA limits for acceptance or rejection of verified target doses overtime of the EBRT process. Result and Discussion: Target doses for the 198 patients were calculated and SPC applied to test whether the action limits set by the Process Behavior Charts could be applied as QA for verified doses in EBRT. Results for the two sub-groups of n = 3 and n = 4 that were tested produced action thresholds which are within clinical dose specifications for both conventional AP/PA and 3D-CRT EBRT treatment techniques for cervical cancer. Conclusion: Action thresholds set by SPC were within the clinical dose specification of ±5% uncertainty for both conventional AP/PA and 3D-CRT EBRT treatment techniques for cervical cancer. So the concept of SPC could be applied in setting QA action limits for dose verifications in EBRT.

Assessing the Awareness and Usage of Quality Control Tools with Emphasis to Statistical Process Control (SPC) in Ethiopian Manufacturing Industries

Introduction: The present work was devoted to assess the awareness and usage of quality control tools with the emphasis on statistical process control in Ethiopian manufacturing industries. Semi structured questionnaire has been employed to executive and technical managers of manufacturing industries of various size and specialism across the country. Stratified random sample method by region was used to select sample industries for the study. The samples used for this study are industries mainly from Oromiya, Addis Ababa, Tigray, Amara, SNNP and Diredawa regions proportional to their size of the available industries. Methods: Exploratory method and descriptive statistics was used for data analysis. Available documents and reports related to quality control policy of the selected companies were investigated. Results and Discussions: The number of manufacturing industries involved in this study was 44. Of the sampled manufacturing industries about 60% are from Oromiya and Addis Ababa regions. It has been reported that 100% of the respondents said that the importance of quality control tools is very important to their organizations’ productivity and quality improvement (Figure 3). Quality control professionals were also asked the extent to which quality control system is working in their industry and majority of the respondents (45%) have indicated that quality control system is working to some extent in their respective industries (Figure 18). Conclusions and Recommendations: Most of the quality department of the industries did not fully recognize the importance of statistical process control as quality control tools. This is mainly due to lack of awareness and motivation of the top managements, shortage of man power in the area, and others together would make it difficult to apply quality control tools in their organization. In general, the industries in Ethiopia are deficient in vigor and found to be stagnant hence less exposed to a highly competitive market and don’t adopt the latest quality control techniques in order to gain knowledge about systems to improve quality and operational performance. We conclude that quality management system has to be established as an independent entity with a real power and hence the quality control department which is responsible for quality can make an irreversible decision with respect to quality of any given product. Moreover, the concerned bodies (government and ministry of industries) should give attention and work together with universities to ensure how these statistical process control techniques could be incorporated in a curriculum of the universities at higher levels in degree and masters programs. Furthermore, different trainings which could improve quality and efficiency of their respective management system should be given as short and long term to the employees including top and middle managers found in various industries relevant to their process.

Preparation of Rosmarinic Acid Injection from Folium perillae

[Objective] To extract the effective component rosmarinic acid from Folium perillae,study preparation technology and quality control of rosmarinic acid injection and provide test basis for hemorheological drug development and clinic application.[Method]The coarse powder of Folium perillae(40 μm)was lixiviated with hot water and acidized to make aqueous extracts.Rosmarinic acid from the aqueous mixture was extracted with Ethyl Acetate.And Et Ac was evaporated to obtain primary product.The injection was purified by pH adjustment.Concentration of rosmarinic acid in the injection was detected by high performance liquid chromatography(HPLC).Contents of tannin,resin and oxalate were eliminated according to the Chinese Pharmacopeia(2005 edition).Stability,irritation,haemolyticus,LD50 and thermogenic substance of this injection were also detected.[Result]The content of rosmarinic acid in Folium perillae injection is 2.81 mg/ml,and the content of LD50 was 406.82 mg/kg.This injection was consistent with the stipulation of Chinese Pharmacopeia(2005 edition).[Conclusion]The preparation technology of this experiment was reasonable.The stable qualities of the prepared injection meet the injection requirement.

Preparation Process and Quality Standard of Rougan Huaxian Ointment

[Objectives] To establish the preparation process and quality standard of Rougan Huaxian ointment.[Methods] The L 9(3 4) orthogonal test was employed to optimize the preparation process by considering the multiplication of water addition, extraction time, and extraction frequency as influencing factors. The dry paste yield was utilized as the evaluation criterion, in conjunction with the actual production conditions. Thin layer chromatography was employed to identify Radix Astragali, Lycii Fructus, Herba Dendrobii, and Rhizoma Polygoni Cuspidati. Ethanol served as the solvent for the determination of ethanol-soluble extractives using the cold immersion method.[Results] The preparation process was conducted as follows: the specified quantity of medicinal materials was combined with water for extraction purposes, performed in two separate stages. In each stage, eight times the amount of water was added. The first extraction lasted for 1.5 h, while the second extraction was completed in 1.0 h. The resulting liquid was then concentrated into a thick paste with a relative density ranging from 1.25 to 1.30 at a temperature of 60 ℃. The thin-layer chromatography analysis of Radix Astragali, Lycii Fructus, Herba Dendrobii, and Rhizoma Polygoni Cuspidati demonstrated distinct spots, effective separation, and the absence of interference from negative samples. Additionally, the ethanol-soluble extractives yielded a minimum of 8.0% in terms of dry weight.[Conclusions] The preparation process for Rougan Huaxian ointment is both stable and feasible. Furthermore, the quality standards established for this preparation are unique and reproducible, thereby facilitating effective quality control.

Multivariate Statistical Process Monitoring and Control: Recent Developments and Applications to Chemical Industry

Multivariate statistical process monitoring and control (MSPM&C) methods for chemical process monitoring with statistical projection techniques such as principal component analysis (PCA) and partial least squares (PLS) are surveyed in this paper. The four-step procedure of performing MSPM&C for chemical process, modeling of processes, detecting abnormal events or faults, identifying the variable(s) responsible for the faults and diagnosing the source cause for the abnormal behavior, is analyzed. Several main research directions of MSPM&C reported in the literature are discussed, such as multi-way principal component analysis (MPCA) for batch process, statistical monitoring and control for nonlinear process, dynamic PCA and dynamic PLS, and on-line quality control by inferential models. Industrial applications of MSPM&C to several typical chemical processes, such as chemical reactor, distillation column, polymerization process, petroleum refinery units, are summarized. Finally, some concluding remarks and future considerations are made.

The development of Fructus corni quality standard considering the effects of processing

The quality standards for Fructus Comi have been established based on the effects of the manufacturing processes.Three critical process parameters(CPPs)of extraction,filtration,and concentration to prepare Fructus Comi concentrate were identified by Plackett-Burman design with a single batch of Fructus Corni,which were heating medium temperature,extraction time,and water addition.Morroniside yield,loganin yield,and dry matter yield were process critical quality attributes(CQAs).CPPs arranged with a Box-Behnken design were applied to treat different batches of Fructus Comi After constructing a model that included CPPs,material propertie s,and process CQAs,loganin content was found to be the critical material attribute(CMA).The design space was calculated with a probability method.According to the limits of process CQAs,the minimum content of loganin in Fructus Corni was calculated with an error propagation method,which was 6.92 mg·g^(-1).When the content of loganin in Fructus Corni reaches up to 6.92 mg·g^(-1),the material is considered high-quality and is most suitable for the process.High-quality material can be used for production of Fructus Comi concentrate.This method can also be used to set material quality standards for other Chinese medicines.

Multi-objective quality control method for cold-rolled products oriented to customized requirements

To deal with the increasing demand for low-volume customization of the mechanical properties of cold-rolled products, a two-way control method based on mechanical property prediction and process parameter optimization(PPO) has become an effective solution. Aiming at the multi-objective quality control problem of a company's cold-rolled products, based on industrial production data, we proposed a process parameter design and optimization method that combined multi-objective quality prediction and PPO. This method used the multi-output support vector regression(MSVR) method to simultaneously predict multiple quality indices. The MSVR prediction model was used as the effect verification model of the PPO results. It performed multi-process parameter collaborative design and realized the optimization of production process parameters for customized multi-objective quality requirements. The experimental results showed that, compared with the traditional single-objective quality prediction model based on support vector regression(SVR), the multi-objective prediction model could better take into account the coupling effect between process parameters and quality index, the MSVR model prediction accuracy was higher than that of the SVR, and the optimized process parameters were more capable and reflected the influence of metallurgical mechanism on the quality index,which were more in line with actual production process requirements.

Combinative Approaches of Chemistry, Pharmacology and Toxicology for the Optimal Pharmaceutical Preparation of an Anti-arthritic Chinese Medicine Formulation QFJBT

Objective Qing Fu Juan Bi Tang(QFJBT)is an anti-arthritic Chinese medicine formula consisting of five herbs:Aconiti Lateralis Radix Praeparata(Fu Zi,附子),Sinomenii Caulis(Qing Feng Teng,青风藤),Astragali Radix(Huang Qi,黄芪),Paeoniae Radix Alba(Bai Shao,白芍)and Moutan Cortex(Mu Dan Pi,牡丹皮),which have well-established histories of use for treatment of rheumatic and arthritic diseases.We intended to establish the optimized and standardized pharmaceutical procedures and manufacturing processes for the pilot production of QFJBT to develop it as a novel botanical drug product for treatment of rheumatoid arthritis(RA).Methods The combinative approaches of chemical assessment,toxicological and pharmacological evaluation were explored to define the pharmaceutical preparation of QFJBT.Results The optimized and standardized pharmaceutical procedures and manufacturing processes for the pilot production of QFJBT were established in terms of greatest chemical contents of bioactive constituents,potent anti-inflammatory and antinociceptive activities,and favorable safety profile.Quality analysis of the pilot product of QFJBT by high-performance liquid chromatography(HPLC)demonstrated that the chromatographic fingerprint profiles of three batches of QFJBT were basically identical and the contents of four characteristic and bioactive markers were relatively consistent.General toxicological studies showed a favorable safety profile of QFJBT.The maximum tolerated single dose of QFJBT was determined in both sexes of rats to be 33.63 g/kg body weight which is equivalent to 346 times of clinical dose.In the chronic oral toxicity study,the results of laboratory investigation showed that QFJBT at doses of 3.89,6.80 and 9.72 g/kg body weight(equivalent to 40,70 and 100-fold clinical doses,respectively)caused no changes in all hematological parameters and blood biochemical parameters of rats.No mortality or specific toxic responses were observed in animals after three months of repeated dosing with QFJBT.Conclusion The optimized and standardized pharmaceutical and manufacturing processes for the production of QFJBT have been successfully screened and identified through established rigorous in-process controls.

Assay method for quality control and stability studies of a new antimalarial agent (CDRI 99/411)

CDRI compound no. 99/411 is a potent 1,2,4-trioxane antimalarial candidate drug under development at our Institute. An HPLC method for determination of CDRI 99/411 with its starting material and intermediates has been developed and validated for in process quality control and stability studies. The analytical performance parameters such as linearity, precision, accuracy, specificity, limit of detection （LOD） and lower limit of quantification （LLOQ） were determined according to International Conference on Harmonization ICH Q2（R1） guidelines. HPLC separation was achieved on a RP-select B Lichrosphere~ column （250 mm x 4 ram, 5 lam, Merck） using water containing 0.1% glacial acetic acid and acetonitrile as the mobile phase in a gradient elution. The eluents were monitored by a photo diode array detector at 245 and 275 nm. Based on signal to noise ratio of 3 and 10 the LOD of CDRI 99/411 was 0.55 μg/mL, while the LLOQ was 1.05 μg/mL. The calibration curves were linear in the range of 1.05- 68 μg/mL. Precision of the method was determined by inter- and intra-assay variations within the acceptable range.

Advances in Process Control for Refractory Production

This paper reviews main problems of domestic refractories, in terms of the structure, principle, performance and new theory of automatic control, such as modern control, fuzzy control, artificial neural network, and expert system. Advanced equipment used in Rill Dalian Plant is introduced, as well as quality control and guarantee in Europe. Some topics to upgrade Chinese refractory industry are discussed.

Frame Design and Reality of On-line Quality Control System for CNC Machining Center Based on Microcomputer

After giving a short review of the methods used for detecting and monitoring in general systems, this paper describes the way of communication between computer and Computer Numerical Control (CNC) Machining Center (MC). Based on these, the paper addresses the means of performing in cycle measurement for manufacturing quality, provides an approach of improving the state of manufacturing process by achieving the real time change of control parameters according to the level of manufacturing process, and discusses the technique of implementing in process dimensional errors compensation corresponding to the in cycle measurement. The results of the experiments show that the frame design is successful and the operation is reliable. The system is taking shape nowadays.