Coal dust explosion accidents often cause substantial property damage and casualties and frequently involve nano-sized coal dust.In order to study the impact of nano-sized coal on coal dust and methane–coal dust expl...Coal dust explosion accidents often cause substantial property damage and casualties and frequently involve nano-sized coal dust.In order to study the impact of nano-sized coal on coal dust and methane–coal dust explosions,a pipe test apparatus was used to analyze the explosion pressure characteristics of five types of micro-nano particle dusts(800 nm,1200 nm,45μm,60μm,and 75μm)at five concentrations(100 g/m3,250 g/m3,500 g/m3,750 g/m3,and 1000 g/m3).The explosion pressure characteristics were closely related to the coal dust particle size and concentration.The maximum explosion pressure,maximum rate of pressure rise,and deflagration index for nano-sized coal dust were larger than for its micro-sized counterpart,indicating that a nano-sized coal dust explosion is more dangerous.The highest deflagration index Kst for coal dust was 13.97 MPa/(m·s),indicating weak explosibility.When 7%methane was added to the air,the maximum deflagration index Kst for methane–coal dust was 42.62 MPa/(m·s),indicating very strong explosibility.This indicates that adding methane to the coal dust mixture substantially increased the hazard grade.展开更多
The shock wave of the underwater explosion can cause severe damage to the ship structure.The propagation characteristics of shock waves near the structure surface are complex,involving lots of complex phenomena such a...The shock wave of the underwater explosion can cause severe damage to the ship structure.The propagation characteristics of shock waves near the structure surface are complex,involving lots of complex phenomena such as reflection,transmission,diffraction,and cavitation.However,different structure surface boundaries have a significant effect on the propagation characteristics of pressure.This paper focuses on investigating the behavior of shock wave propagation and cavitation from underwater explosions near various structure surfaces.A coupled Runge–Kutta discontinuous Galerkin(RKDG)and finite elementmethod(FEM)is utilized to solve the problem of the complex waves of fluids and structure dynamic response,considering the fluid compressibility.The level set(LS)method and the ghost fluid(GF)method are combined to capture the moving interface and deal with the stability of the coupling between the shock wave and structure surface.Besides,a cut-off cavitation model is introduced to the RKDG method.The validation of the numerical calculation model is discussed by comparing it with the known solution to verify the numerical solutions.Then,crucial kinds of structure surface boundary conditions include shallow-water single layer elasticity plate,double-layer crevasse elasticity plate,single layer curved elasticity plate,and double-layer curved elasticity plates are analyzed and discussed.The results and analysis can provide references for underwater explosion pressure characteristics,the impacting response of different boundary structures,and designing structures.展开更多
Radial borehole fracturing that combines radial boreholes with hydraulic fracturing is anticipated to improve the output of tight oil and gas reservoirs.This paper aims to investigate fracture propagation and pressure...Radial borehole fracturing that combines radial boreholes with hydraulic fracturing is anticipated to improve the output of tight oil and gas reservoirs.This paper aims to investigate fracture propagation and pressure characteristics of radial borehole fracturing in multiple layers.A series of laboratory experiments with artificial rock samples(395 mm×395 mm×395 mm)was conducted using a true triaxial fracturing device.Three crucial factors corresponding to the vertical distance of adjacent radial borehole layers(vertical distance),the azimuth and diameter of the radial borehole are examined.Experimental results show that radial borehole fracturing in multiple layers generates diverse fracture geometries.Four types of fractures are identified based on the connectivity between hydraulic fractures and radial boreholes.The vertical distance significantly influences fracture propagation perpendicular to the radial borehole axis.An increase in the vertical distance impedes fracture connection across multiple radial borehole layers and reduces the fracture propagation distance along the radial borehole axis.The azimuth also influences fracture propagation along the radial borehole axis.Increasing the azimuth reduces the guiding ability of radial boreholes,which makes the fracture quickly curve to the maximum horizontal stress direction.The breakdown pressure correlates with diverse fracture geometries observed.When the fractures connect multi-layer radial boreholes,increasing the vertical distance decreases the breakdown pressure.Decreasing the azimuth and increasing the diameter also decrease the breakdown pressure.The extrusion force exists between the adjacent fractures generated in radial boreholes in multiple rows,which plays a crucial role in enhancing the guiding ability of radial boreholes and results in higher breakdown pressure.The research provides valuable theoretical insights for the field application of radial borehole fracturing technology in tight oil and gas reservoirs.展开更多
Electro-hydraulic servo-valves are widely used components in the mechanical industry,aerospace and aerodynamic devices which precisely control the airplane or missile wings.Due to the small size and complex structure ...Electro-hydraulic servo-valves are widely used components in the mechanical industry,aerospace and aerodynamic devices which precisely control the airplane or missile wings.Due to the small size and complex structure in the pilot stage of deflection flapper servo-valves,accurate mathematical models for the flow and pressure characteristics have always been very difficult to be built.In this paper,mathematical models for the pilot stage of deflection flapper servo-valve are investigated to overcome some gaps between the theoretical formulation and overall performance of the valve by considering different flow states.Here,a mathematical model of the velocity distribution at the flapper groove exit is established by using Schlichting velocity equations for incompressible laminar fluid flow.Moreover,when the flow becomes turbulent,a mathematical model of pressure characteristics in the receiving ports is built on the basis of the assumption of the collision between the liquid and the jet as the impact of the jet on a moving block of fluid particles.To verify the analytical models for both laminar and turbulent flows,the pressure characteristics of the deflection flapper pilot stage are calculated and tested by using numerical simulation and experiment.Experimental verification of the theory is also presented.The computed numerical and analytical results show a good agreement with experimental data.展开更多
The pressure characteristics in the throats of Venturi tube and behind triangular multi-orifice plates were experimentally investigated by a pressure data acquisition system of SINOCERA-YE6263, and the effect of throa...The pressure characteristics in the throats of Venturi tube and behind triangular multi-orifice plates were experimentally investigated by a pressure data acquisition system of SINOCERA-YE6263, and the effect of throat length of Venturi tube, different geometric parameters of multi-orifice plate and their combinations on the time-averaged pressure, cavitation number, and pressure frequency spectrum, correlation function calculated by FFT were analyzed. The experimental results showed that the throat length of L/R= 40 made for improving the fluctuation energy and promoting the uniform energy distribution, appropriately decreasing the size and increasing the number of orifice could accelerate the uniform distribution of the fluctuation energy in frequency domain. In the combination reactors, the cavitation number behind multi-orifice plates was lower and the fluctuation of correlation function was more intense.展开更多
In this paper,the transfer functions of ultrasonic transducers under different temperatures are imitated according to Mason equivalent circuit. The relevant experiments are carried out. The results show that the trans...In this paper,the transfer functions of ultrasonic transducers under different temperatures are imitated according to Mason equivalent circuit. The relevant experiments are carried out. The results show that the transfer characteristic of ultrasonic transducer varies with temperature and pressure. Therefore, we present an approach to correct the amplitude spectra of ultrasonic echoes got in different temperature and pressure environmeots. The theoretical simulation and experimental results prove that the approach is simple, effective and practical.展开更多
Aiming at solving the problem of strong coupling characteristic of the key parameters of high-speed pneumatic pulse width modulation( PWM) on / off valve, a general lumped parameter mathematical model based on the val...Aiming at solving the problem of strong coupling characteristic of the key parameters of high-speed pneumatic pulse width modulation( PWM) on / off valve, a general lumped parameter mathematical model based on the valves time periods was well developed. With this model,the mass flow rate and dynamic pressure characteristics of constant volumes controlled by high-speed pneumatic PWM on /off valves was well described. A variable flow rate coefficient model was proposed to substitute for the constant one used in most of the prior works to investigate PWM on /off valves' dynamical pressure response, and a formula for disclosing the inherent relationship among the PWM command signal,static mass flow rate,and sonic conductance of the valve was newly derived.Finally,an extensive set of analytical experimental comparisons were implemented to verify the validity of the proposed mathematica model. With the proposed model, PWM on /off valves' characteristics,such as mass flow rate,step pressure response of the valve control system,mean pressure and ripple amplitude,not only in the linear range,but also in the nonlinear range can be wel predicted; Good agreement between measured and calculated results was obtained,which proved that the model is helpful for designing a control strategy in a closed loop control system.展开更多
Objective To study the differences in blood pressure (BP) levels and the main factors raising BP among the population in Guangdong Province. Methods The data analyzed stem from the sampling survey of hypertension in G...Objective To study the differences in blood pressure (BP) levels and the main factors raising BP among the population in Guangdong Province. Methods The data analyzed stem from the sampling survey of hypertension in Guangdong Province in 1991, covering 42, 894 subjects over 15 years old. Individual characteristics included age, sex, occupation, education, smoking, alcohol drinking and body mass index (BMI) . Results Systolic and diastolic BP increased with age. The hypertension prevalence rate in male is higher than in female. The age - adjusted prevalence rate in office personnel is the highest (12.9 % ) among all occupations. It was increased with education level and BMI (in people educated at university and over is 13. 1 % ), and higher in smokers and alcohol-drinkers than non-smokers and non -alcohol-drinkers. Conclusions Age, occupation, education, smoking, alcohol drinking and BMI all effect BP. These risk factors should be reduced in the Guangdong population.展开更多
The disc-seal single screw pump(DSSP)used in the field of high viscosity oily sludge transport has a huge advantage.However,there is no research on the pressurization characteristics of the DSSP at present,which makes...The disc-seal single screw pump(DSSP)used in the field of high viscosity oily sludge transport has a huge advantage.However,there is no research on the pressurization characteristics of the DSSP at present,which makes its application limited.In view of this,the pressurization process mathematical model of the DSSP was established based on the geometric model of the pump.By using this model,the pressurization characteristics of DSSP and the influence of working parameters on the pressurization process were studied combined with the principle of back-flow pressurization.Analysis results show that the instantaneous pressurization process could be realized mainly depending on the reflux pressurization from the outlet chamber to the pressurization chamber when the screw rotor rotating angle is located at-5°to+5°.The pressure in the pressurization chamber will increase with the increase of working parameters which include inlet pressure,outlet pressure,screw rotation velocity and dynamic viscosity of fluid medium in the area of flow-back pressurization.The screw rotation velocity and the viscosity of the conveying medium have significant effects on the peak pressure in the pressurization chamber,and the peak pressure in the pressurization chamber is proportional to the screw rotation velocity and the dynamic viscosity coefficient of the conveying medium.The proportional coefficient between the peak pressure and the screw rotation velocity is 6.29×10~4.The proportional coefficient between the peak pressure and the dynamic viscosity of the conveying medium is 6.28×10~6.展开更多
We present new quantitative model describing the pressure dependence of acoustic P-and S-wave velocities.Assuming that a variety of individual mechanisms or defects(such as cracks,pore collapse and grain crushing)can ...We present new quantitative model describing the pressure dependence of acoustic P-and S-wave velocities.Assuming that a variety of individual mechanisms or defects(such as cracks,pore collapse and grain crushing)can contribute to the pressure-dependent change of the wave velocity,we order a characteristic pressure to all of them and allow a series of exponential terms in the description of the(Pand S-waves)velocity-pressure function.We estimate the parameters of the multi-exponential rock physical model in inversion procedures using laboratory measured P-and S-wave velocity data.As is known,the conventional damped least squares method gives acceptable results only when one or two individual mechanisms are assumed.Increasing the number of exponential terms leads to highly nonlinear ill-posed inverse problem.Due to this reason,we develop the spectral inversion method(SIM)in which the velocity amplitudes(the spectral lines in the characteristic pressure spectrum)are only considered as unknowns.The characteristic pressures(belonging to the velocity amplitudes)are excluded from the set of inversion unknowns,instead,they are defined in a set of fixed positions equidistantly distributed in the actual interval of the independent variable(pressure).Through this novel linear inversion method,we estimate the parameters of the multi-exponential rock physical model using laboratory measured P-and S-wave velocity data.The characteristic pressures are related to the closing pressures of cracks which are described by well-known rock mechanical relationships depending on the aspect ratio of elliptical cracks.This gives the possibility to estimate the aspect ratios in terms of the characteristic pressures.展开更多
It is well known that soilewater characteristic curve (SWCC) plays an important role in unsaturated soil mechanics, but the measurement of SWCC is inconvenient. In laboratory it requires days of testing time. For fi...It is well known that soilewater characteristic curve (SWCC) plays an important role in unsaturated soil mechanics, but the measurement of SWCC is inconvenient. In laboratory it requires days of testing time. For fine-grained clays, it may last for a couple of months using pressure plate tests. In this study, the effects of sample dimensions and shapes on the balance time of measuring SWCCs using pressure plate tests and the shape of SWCCs are investigated. It can be found that the sample dimensions and shapes have apparent influence on the balance time. The testing durations for circular samples with smaller diameters and annular samples with larger contact area are significantly shortened. However, there is little effect of sample dimensions and shapes on the shape of SWCCs. Its mechanism is explored and discussed in details through analysing the principle of pressure plate tests and microstructure of the sample. Based on the above findings, it is found that the circular samples with smaller dimensions can accelerate the testing duration of SWCC using the pressure plate.展开更多
Aerodynamic pressure significantly impacts the scientific evaluation of tunnel service performance.The aerodynamic pressure of two trains running in a double-track tunnel is considerably more complicated than that of ...Aerodynamic pressure significantly impacts the scientific evaluation of tunnel service performance.The aerodynamic pressure of two trains running in a double-track tunnel is considerably more complicated than that of a single train.We used the numerical method to investigate the difference in aerodynamic pressure between a single train and two trains running in a double-track tunnel.First,the numerical method was verified by comparing the results of numerical simulation and on-site monitoring.Then,the characteristics of aerodynamic pressure were studied.Finally,the influence of various train-tunnel factors on the characteristics of aerodynamic pressure was investigated.The results show that the aerodynamic pressure variation can be divided into stage I:irregular pressure fluctuations before the train tail leaves the tunnel exit,and stage II:periodic pressure declines after the train tail leaves the tunnel exit.In addition,the aerodynamic pressure simultaneously jumps positively or drops negatively for a single train or two trains running in double-track tunnel scenarios.The pressure amplitude in the two-train case is higher than that for a single train.The maximum positive peak pressure difference(P_(STP))and maximum negative peak pressure difference(P_(STN))increase as train speed rises to the power from 2.256 to 2.930 in stage I.The P_(STP) and P_(STN) first increase and then decrease with the increase of tunnel length in stage I.The P_(STP) and P_(STN) increase as the blockage ratio rises to the power from 2.032 to 2.798 in stages I and II.展开更多
A transient flow model of tree-shaped fractal reservoirs is built by embedding a fracture network simulated by a tree-shaped fractal network into a matrix system. The model can be solved using the Laplace conversion m...A transient flow model of tree-shaped fractal reservoirs is built by embedding a fracture network simulated by a tree-shaped fractal network into a matrix system. The model can be solved using the Laplace conversion method. The dimensionless bottom hole pressure can be obtained using the Stehfest numerical inversion method. The bi-logarithmic type curves for the trce-shaped fractal reservoirs are thus obtained. The pressure transient responses under different fractal factors are discussed. The factors with a primary effect on the inter-porosity flow regime include the initial branch number N, the length ratio α, and the branch angle θ. The diameter ratio β has a significant effect on the fracture radial flow, the inter-porosity and the total system radial flow regimes. The total branch level M of the network mainly influences the total system radial flow regime. The model presented in this paper provides a new methodology for analyzing and predicting the pressure dynamic characteristics of naturally fractured reservoirs.展开更多
Flameless combustion is a new technology with the following advantages:1)Ultra-low emissions of both NOX and CO;2)fuel flexibility,from liquid fuels,natural gas to hydrogen-rich syngas;3)lower possibility of flashback...Flameless combustion is a new technology with the following advantages:1)Ultra-low emissions of both NOX and CO;2)fuel flexibility,from liquid fuels,natural gas to hydrogen-rich syngas;3)lower possibility of flashback and thermoacoustic oscillations.In this paper,we focus on the dynamic characteristics of a flameless model combustor.Experimental results show that flameless combustion can lower emissions while maintaining combustion stability.However,combining a pilot flame with flameless combustion may excite thermoacoustic instability.展开更多
This paper presents a numerical simulation of the geometry and the pressure distribution of a ventilated supercavity at different cavitator amplitudes and periods of motion.The numerical method is validated by compari...This paper presents a numerical simulation of the geometry and the pressure distribution of a ventilated supercavity at different cavitator amplitudes and periods of motion.The numerical method is validated by comparing with the results of a semi-empirical formula under specific conditions.It is shown that the simulation can capture the boundary fluctuations of the ventilated supercavity and its internal pressure variations in a cavitator motion cycle.The simulation results show that the supercavity boundary experiences wave-like deformations when the wavelength of the disturbance caused by the cavitator motion is comparable to the supercavity length.It is also shown that the supercavity closure changes in form between a re-entrant jet and a twin vortex owing to the variations of the pressure difference between the outside and the inside of the supercavity near the closure region.The maximum diameter of the ventilated supercavity exhibits periodic changes with a double peak in each cavitator motion cycle,caused by the corresponding changes of the difference between the internal and external pressures.With the increase of the amplitude of motion of the cavitator,the supercavity boundary has enhanced wave-like undulations,with an increased maximum diameter,and with fluctuations in the cavitation number.As the period of the cavitator motion increases,the wavelength of the disturbances caused by this motion becomes greater than the supercavity length,and so the wave-like undulations of the supercavity boundary and the maximum diameter of the supercavity gradually decrease,but the variations of the cavitation number increase.Moreover,with the increase of the periods,the delay effects on the variations of the characteristics of the supercavity geometry caused by cavitator motion gradually decrease,and they practically vanish for large periods.展开更多
The important operating characteristics of pulsed Pressure Gain Combustion(PGC)propulsion are the pressure gain of the combustor component and the propulsive performance gain of the engine.A ramjet-type valve/valveles...The important operating characteristics of pulsed Pressure Gain Combustion(PGC)propulsion are the pressure gain of the combustor component and the propulsive performance gain of the engine.A ramjet-type valve/valveless air-breathing pulsed detonation engine with a supersonic internal compression inlet is investigated.Based on an ideal thermal cycle,the ideal equivalent pressure ratios(pcb)of the Pulsed Detonation Combustor(PDC)are obtained theoretically which are directly related with the propulsive performance of the engine.By introducing an orifice loss model into the cycles,the critical pressure drop ratios through the orifice for the PDC achieving pressure gain and the engine achieving thrust gain are studied.More influencing factors are investigated by the use of a one-dimensional(1-D)numerical simulation model.The operating characteristics of the pulse detonation engine are investigated with changes of the valve type,the inlet/outlet area ratio of the PDC,the nozzle area ratio,and flight conditions.All these factors can affect pcbof the PDC,and pcbcan be optimized by changing the geometry of the engine.The most important influence parameter is the valve type.When using an orifice-type aerodynamic valve,simulation results show that the PDC cannot achieve the pressure gain characteristics.When a supersonic internal compression inlet is introduced to the engine,whether the Pulse Detonation Engine(PDE)can achieve thrust gain comparable with that of an ideal Brayton cycle engine not only is related to the pressure gain of the combustor,but also needs to optimize the engine structure to reduce the total pressure loss.展开更多
Experimental observations together with theoretical analysis were conducted to investigate the break phenomenon and the corresponding mechanisms of self-pulsation for a liquid-centered swirl coaxial injector with rece...Experimental observations together with theoretical analysis were conducted to investigate the break phenomenon and the corresponding mechanisms of self-pulsation for a liquid-centered swirl coaxial injector with recess number of RN=1.Instantaneous spray images were obtained based on background light imaging technology with a high-speed camera.By dynamic analysis of the flow process of the liquid sheet in the recess chamber,a 1D self-pulsation theoretical model was established,and the self-sustaining mechanisms of self-pulsation were analyzed in depth.The results show that the increase of the momentum flux ratio will lead to the occurrence of the break phenomenon of self-pulsation for the injector with a larger recess length,and the frequency and intensity of self-pulsation before and after the break phenomenon differ significantly.The flow dynamics in the recess chamber sequentially transform from a periodic expansion-dominated flow to a stable flow,and then develop to a periodic contraction-dominated flow during the break process of self-pulsation.With the occurrence of self-pulsation before the break phenomenon,the liquid sheet has little effect on the pressure disturbance in the recess chamber.In contrast,with the occurrence of self-pulsation after the break phenomenon,the pressure disturbance is obviously affected by the liquid sheet.Based on the theoretical analysis model of self-pulsation,the self-pulsation frequency can be predicted.Furthermore,the self-sustaining mechanism of self-pulsation before and after the break phenomenon is preliminarily confirmed.The energy transfer between the gas-and liquid-phase is an important factor for maintaining the self-pulsation process.展开更多
基金This research was supported by the National Key Research and Development Program of China(2016YFC0801800)the National Nature Science Foundation of China(51774291,51864045).
文摘Coal dust explosion accidents often cause substantial property damage and casualties and frequently involve nano-sized coal dust.In order to study the impact of nano-sized coal on coal dust and methane–coal dust explosions,a pipe test apparatus was used to analyze the explosion pressure characteristics of five types of micro-nano particle dusts(800 nm,1200 nm,45μm,60μm,and 75μm)at five concentrations(100 g/m3,250 g/m3,500 g/m3,750 g/m3,and 1000 g/m3).The explosion pressure characteristics were closely related to the coal dust particle size and concentration.The maximum explosion pressure,maximum rate of pressure rise,and deflagration index for nano-sized coal dust were larger than for its micro-sized counterpart,indicating that a nano-sized coal dust explosion is more dangerous.The highest deflagration index Kst for coal dust was 13.97 MPa/(m·s),indicating weak explosibility.When 7%methane was added to the air,the maximum deflagration index Kst for methane–coal dust was 42.62 MPa/(m·s),indicating very strong explosibility.This indicates that adding methane to the coal dust mixture substantially increased the hazard grade.
基金the financial supported by the National Natural Science Foundation of China(No.11602069 and No.51779056)the Natural Science Foundation of Heilonjiang Province(No.E2017026).
文摘The shock wave of the underwater explosion can cause severe damage to the ship structure.The propagation characteristics of shock waves near the structure surface are complex,involving lots of complex phenomena such as reflection,transmission,diffraction,and cavitation.However,different structure surface boundaries have a significant effect on the propagation characteristics of pressure.This paper focuses on investigating the behavior of shock wave propagation and cavitation from underwater explosions near various structure surfaces.A coupled Runge–Kutta discontinuous Galerkin(RKDG)and finite elementmethod(FEM)is utilized to solve the problem of the complex waves of fluids and structure dynamic response,considering the fluid compressibility.The level set(LS)method and the ghost fluid(GF)method are combined to capture the moving interface and deal with the stability of the coupling between the shock wave and structure surface.Besides,a cut-off cavitation model is introduced to the RKDG method.The validation of the numerical calculation model is discussed by comparing it with the known solution to verify the numerical solutions.Then,crucial kinds of structure surface boundary conditions include shallow-water single layer elasticity plate,double-layer crevasse elasticity plate,single layer curved elasticity plate,and double-layer curved elasticity plates are analyzed and discussed.The results and analysis can provide references for underwater explosion pressure characteristics,the impacting response of different boundary structures,and designing structures.
基金The authors gratefully acknowledge the financial support received from the Strategic Cooperation Technology Projects of CNPC and CUPB(No.ZLZX2020-01)the National Key Scientific Research Instrument Research Project of NSFC(No.51827804).
文摘Radial borehole fracturing that combines radial boreholes with hydraulic fracturing is anticipated to improve the output of tight oil and gas reservoirs.This paper aims to investigate fracture propagation and pressure characteristics of radial borehole fracturing in multiple layers.A series of laboratory experiments with artificial rock samples(395 mm×395 mm×395 mm)was conducted using a true triaxial fracturing device.Three crucial factors corresponding to the vertical distance of adjacent radial borehole layers(vertical distance),the azimuth and diameter of the radial borehole are examined.Experimental results show that radial borehole fracturing in multiple layers generates diverse fracture geometries.Four types of fractures are identified based on the connectivity between hydraulic fractures and radial boreholes.The vertical distance significantly influences fracture propagation perpendicular to the radial borehole axis.An increase in the vertical distance impedes fracture connection across multiple radial borehole layers and reduces the fracture propagation distance along the radial borehole axis.The azimuth also influences fracture propagation along the radial borehole axis.Increasing the azimuth reduces the guiding ability of radial boreholes,which makes the fracture quickly curve to the maximum horizontal stress direction.The breakdown pressure correlates with diverse fracture geometries observed.When the fractures connect multi-layer radial boreholes,increasing the vertical distance decreases the breakdown pressure.Decreasing the azimuth and increasing the diameter also decrease the breakdown pressure.The extrusion force exists between the adjacent fractures generated in radial boreholes in multiple rows,which plays a crucial role in enhancing the guiding ability of radial boreholes and results in higher breakdown pressure.The research provides valuable theoretical insights for the field application of radial borehole fracturing technology in tight oil and gas reservoirs.
基金The National Natural Science Foundation of China(No.51675119)。
文摘Electro-hydraulic servo-valves are widely used components in the mechanical industry,aerospace and aerodynamic devices which precisely control the airplane or missile wings.Due to the small size and complex structure in the pilot stage of deflection flapper servo-valves,accurate mathematical models for the flow and pressure characteristics have always been very difficult to be built.In this paper,mathematical models for the pilot stage of deflection flapper servo-valve are investigated to overcome some gaps between the theoretical formulation and overall performance of the valve by considering different flow states.Here,a mathematical model of the velocity distribution at the flapper groove exit is established by using Schlichting velocity equations for incompressible laminar fluid flow.Moreover,when the flow becomes turbulent,a mathematical model of pressure characteristics in the receiving ports is built on the basis of the assumption of the collision between the liquid and the jet as the impact of the jet on a moving block of fluid particles.To verify the analytical models for both laminar and turbulent flows,the pressure characteristics of the deflection flapper pilot stage are calculated and tested by using numerical simulation and experiment.Experimental verification of the theory is also presented.The computed numerical and analytical results show a good agreement with experimental data.
基金Project supported by the National Natural Science Foundation of China(Grant No.51179172)
文摘The pressure characteristics in the throats of Venturi tube and behind triangular multi-orifice plates were experimentally investigated by a pressure data acquisition system of SINOCERA-YE6263, and the effect of throat length of Venturi tube, different geometric parameters of multi-orifice plate and their combinations on the time-averaged pressure, cavitation number, and pressure frequency spectrum, correlation function calculated by FFT were analyzed. The experimental results showed that the throat length of L/R= 40 made for improving the fluctuation energy and promoting the uniform energy distribution, appropriately decreasing the size and increasing the number of orifice could accelerate the uniform distribution of the fluctuation energy in frequency domain. In the combination reactors, the cavitation number behind multi-orifice plates was lower and the fluctuation of correlation function was more intense.
文摘In this paper,the transfer functions of ultrasonic transducers under different temperatures are imitated according to Mason equivalent circuit. The relevant experiments are carried out. The results show that the transfer characteristic of ultrasonic transducer varies with temperature and pressure. Therefore, we present an approach to correct the amplitude spectra of ultrasonic echoes got in different temperature and pressure environmeots. The theoretical simulation and experimental results prove that the approach is simple, effective and practical.
基金National Natural Science Foundation of China(No.51205362)Zhejiang Provincial National Science Foundation of China(No.LQ12E05017)
文摘Aiming at solving the problem of strong coupling characteristic of the key parameters of high-speed pneumatic pulse width modulation( PWM) on / off valve, a general lumped parameter mathematical model based on the valves time periods was well developed. With this model,the mass flow rate and dynamic pressure characteristics of constant volumes controlled by high-speed pneumatic PWM on /off valves was well described. A variable flow rate coefficient model was proposed to substitute for the constant one used in most of the prior works to investigate PWM on /off valves' dynamical pressure response, and a formula for disclosing the inherent relationship among the PWM command signal,static mass flow rate,and sonic conductance of the valve was newly derived.Finally,an extensive set of analytical experimental comparisons were implemented to verify the validity of the proposed mathematica model. With the proposed model, PWM on /off valves' characteristics,such as mass flow rate,step pressure response of the valve control system,mean pressure and ripple amplitude,not only in the linear range,but also in the nonlinear range can be wel predicted; Good agreement between measured and calculated results was obtained,which proved that the model is helpful for designing a control strategy in a closed loop control system.
文摘Objective To study the differences in blood pressure (BP) levels and the main factors raising BP among the population in Guangdong Province. Methods The data analyzed stem from the sampling survey of hypertension in Guangdong Province in 1991, covering 42, 894 subjects over 15 years old. Individual characteristics included age, sex, occupation, education, smoking, alcohol drinking and body mass index (BMI) . Results Systolic and diastolic BP increased with age. The hypertension prevalence rate in male is higher than in female. The age - adjusted prevalence rate in office personnel is the highest (12.9 % ) among all occupations. It was increased with education level and BMI (in people educated at university and over is 13. 1 % ), and higher in smokers and alcohol-drinkers than non-smokers and non -alcohol-drinkers. Conclusions Age, occupation, education, smoking, alcohol drinking and BMI all effect BP. These risk factors should be reduced in the Guangdong population.
基金supported by National Key R&D Program of China[NO.2020YFB2010002]National Natural Science Foundation of China[NO.51706247,NO.51975585]the Fundamental Research Funds for the Central Universities and the Opening Fund of National Engineering Laboratory of Offshore Geophysical and Exploration Equipment[NO.20CX02312A]
文摘The disc-seal single screw pump(DSSP)used in the field of high viscosity oily sludge transport has a huge advantage.However,there is no research on the pressurization characteristics of the DSSP at present,which makes its application limited.In view of this,the pressurization process mathematical model of the DSSP was established based on the geometric model of the pump.By using this model,the pressurization characteristics of DSSP and the influence of working parameters on the pressurization process were studied combined with the principle of back-flow pressurization.Analysis results show that the instantaneous pressurization process could be realized mainly depending on the reflux pressurization from the outlet chamber to the pressurization chamber when the screw rotor rotating angle is located at-5°to+5°.The pressure in the pressurization chamber will increase with the increase of working parameters which include inlet pressure,outlet pressure,screw rotation velocity and dynamic viscosity of fluid medium in the area of flow-back pressurization.The screw rotation velocity and the viscosity of the conveying medium have significant effects on the peak pressure in the pressurization chamber,and the peak pressure in the pressurization chamber is proportional to the screw rotation velocity and the dynamic viscosity coefficient of the conveying medium.The proportional coefficient between the peak pressure and the screw rotation velocity is 6.29×10~4.The proportional coefficient between the peak pressure and the dynamic viscosity of the conveying medium is 6.28×10~6.
基金supported by the European Union,co-financed by the European Social Fund and the GINOP-2.315-2016-00010"Development of enhanced engineering methods with the aim at utilization of subterranean energy resources"project in the framework of the Szechenyi 2020 Plan,funded by the European Union,co-financed by the European Structural and Investment Funds。
文摘We present new quantitative model describing the pressure dependence of acoustic P-and S-wave velocities.Assuming that a variety of individual mechanisms or defects(such as cracks,pore collapse and grain crushing)can contribute to the pressure-dependent change of the wave velocity,we order a characteristic pressure to all of them and allow a series of exponential terms in the description of the(Pand S-waves)velocity-pressure function.We estimate the parameters of the multi-exponential rock physical model in inversion procedures using laboratory measured P-and S-wave velocity data.As is known,the conventional damped least squares method gives acceptable results only when one or two individual mechanisms are assumed.Increasing the number of exponential terms leads to highly nonlinear ill-posed inverse problem.Due to this reason,we develop the spectral inversion method(SIM)in which the velocity amplitudes(the spectral lines in the characteristic pressure spectrum)are only considered as unknowns.The characteristic pressures(belonging to the velocity amplitudes)are excluded from the set of inversion unknowns,instead,they are defined in a set of fixed positions equidistantly distributed in the actual interval of the independent variable(pressure).Through this novel linear inversion method,we estimate the parameters of the multi-exponential rock physical model using laboratory measured P-and S-wave velocity data.The characteristic pressures are related to the closing pressures of cracks which are described by well-known rock mechanical relationships depending on the aspect ratio of elliptical cracks.This gives the possibility to estimate the aspect ratios in terms of the characteristic pressures.
基金supported by the National Natural Science Foundation of China (Grant No. 10872210)the State Key Laboratory of Geomechanics and Geotechnical Engineering (Grant No. Y11002)
文摘It is well known that soilewater characteristic curve (SWCC) plays an important role in unsaturated soil mechanics, but the measurement of SWCC is inconvenient. In laboratory it requires days of testing time. For fine-grained clays, it may last for a couple of months using pressure plate tests. In this study, the effects of sample dimensions and shapes on the balance time of measuring SWCCs using pressure plate tests and the shape of SWCCs are investigated. It can be found that the sample dimensions and shapes have apparent influence on the balance time. The testing durations for circular samples with smaller diameters and annular samples with larger contact area are significantly shortened. However, there is little effect of sample dimensions and shapes on the shape of SWCCs. Its mechanism is explored and discussed in details through analysing the principle of pressure plate tests and microstructure of the sample. Based on the above findings, it is found that the circular samples with smaller dimensions can accelerate the testing duration of SWCC using the pressure plate.
基金supported by the Key Project of High-Speed Rail Joint Fund of National Natural Science Foundation of China(No.U1934210).
文摘Aerodynamic pressure significantly impacts the scientific evaluation of tunnel service performance.The aerodynamic pressure of two trains running in a double-track tunnel is considerably more complicated than that of a single train.We used the numerical method to investigate the difference in aerodynamic pressure between a single train and two trains running in a double-track tunnel.First,the numerical method was verified by comparing the results of numerical simulation and on-site monitoring.Then,the characteristics of aerodynamic pressure were studied.Finally,the influence of various train-tunnel factors on the characteristics of aerodynamic pressure was investigated.The results show that the aerodynamic pressure variation can be divided into stage I:irregular pressure fluctuations before the train tail leaves the tunnel exit,and stage II:periodic pressure declines after the train tail leaves the tunnel exit.In addition,the aerodynamic pressure simultaneously jumps positively or drops negatively for a single train or two trains running in double-track tunnel scenarios.The pressure amplitude in the two-train case is higher than that for a single train.The maximum positive peak pressure difference(P_(STP))and maximum negative peak pressure difference(P_(STN))increase as train speed rises to the power from 2.256 to 2.930 in stage I.The P_(STP) and P_(STN) first increase and then decrease with the increase of tunnel length in stage I.The P_(STP) and P_(STN) increase as the blockage ratio rises to the power from 2.032 to 2.798 in stages I and II.
基金supported by the National Science Fund for Distinguished Young Scholars of China(Grant No.51125019)supported by the 2014 Australia China National Gas Technology Partnership Fund Top Up Scholoarship
文摘A transient flow model of tree-shaped fractal reservoirs is built by embedding a fracture network simulated by a tree-shaped fractal network into a matrix system. The model can be solved using the Laplace conversion method. The dimensionless bottom hole pressure can be obtained using the Stehfest numerical inversion method. The bi-logarithmic type curves for the trce-shaped fractal reservoirs are thus obtained. The pressure transient responses under different fractal factors are discussed. The factors with a primary effect on the inter-porosity flow regime include the initial branch number N, the length ratio α, and the branch angle θ. The diameter ratio β has a significant effect on the fracture radial flow, the inter-porosity and the total system radial flow regimes. The total branch level M of the network mainly influences the total system radial flow regime. The model presented in this paper provides a new methodology for analyzing and predicting the pressure dynamic characteristics of naturally fractured reservoirs.
基金supported by the National Natural Science Foundation of China(Grant No.50706054)
文摘Flameless combustion is a new technology with the following advantages:1)Ultra-low emissions of both NOX and CO;2)fuel flexibility,from liquid fuels,natural gas to hydrogen-rich syngas;3)lower possibility of flashback and thermoacoustic oscillations.In this paper,we focus on the dynamic characteristics of a flameless model combustor.Experimental results show that flameless combustion can lower emissions while maintaining combustion stability.However,combining a pilot flame with flameless combustion may excite thermoacoustic instability.
基金Projects supported by the National Natural Science Foundation of China(Grant No.51409071).
文摘This paper presents a numerical simulation of the geometry and the pressure distribution of a ventilated supercavity at different cavitator amplitudes and periods of motion.The numerical method is validated by comparing with the results of a semi-empirical formula under specific conditions.It is shown that the simulation can capture the boundary fluctuations of the ventilated supercavity and its internal pressure variations in a cavitator motion cycle.The simulation results show that the supercavity boundary experiences wave-like deformations when the wavelength of the disturbance caused by the cavitator motion is comparable to the supercavity length.It is also shown that the supercavity closure changes in form between a re-entrant jet and a twin vortex owing to the variations of the pressure difference between the outside and the inside of the supercavity near the closure region.The maximum diameter of the ventilated supercavity exhibits periodic changes with a double peak in each cavitator motion cycle,caused by the corresponding changes of the difference between the internal and external pressures.With the increase of the amplitude of motion of the cavitator,the supercavity boundary has enhanced wave-like undulations,with an increased maximum diameter,and with fluctuations in the cavitation number.As the period of the cavitator motion increases,the wavelength of the disturbances caused by this motion becomes greater than the supercavity length,and so the wave-like undulations of the supercavity boundary and the maximum diameter of the supercavity gradually decrease,but the variations of the cavitation number increase.Moreover,with the increase of the periods,the delay effects on the variations of the characteristics of the supercavity geometry caused by cavitator motion gradually decrease,and they practically vanish for large periods.
基金co-supported by the National Natural Science Foundation of China(No.51676164)the Natural Science Basic Research Plan in Shaanxi Province of China(No.2020JZ-09)supported by the opening project of the State Key Laboratory of Explosion Science and Technology at Beijing Institute of Technology(No.KFJJ1913M)。
文摘The important operating characteristics of pulsed Pressure Gain Combustion(PGC)propulsion are the pressure gain of the combustor component and the propulsive performance gain of the engine.A ramjet-type valve/valveless air-breathing pulsed detonation engine with a supersonic internal compression inlet is investigated.Based on an ideal thermal cycle,the ideal equivalent pressure ratios(pcb)of the Pulsed Detonation Combustor(PDC)are obtained theoretically which are directly related with the propulsive performance of the engine.By introducing an orifice loss model into the cycles,the critical pressure drop ratios through the orifice for the PDC achieving pressure gain and the engine achieving thrust gain are studied.More influencing factors are investigated by the use of a one-dimensional(1-D)numerical simulation model.The operating characteristics of the pulse detonation engine are investigated with changes of the valve type,the inlet/outlet area ratio of the PDC,the nozzle area ratio,and flight conditions.All these factors can affect pcbof the PDC,and pcbcan be optimized by changing the geometry of the engine.The most important influence parameter is the valve type.When using an orifice-type aerodynamic valve,simulation results show that the PDC cannot achieve the pressure gain characteristics.When a supersonic internal compression inlet is introduced to the engine,whether the Pulse Detonation Engine(PDE)can achieve thrust gain comparable with that of an ideal Brayton cycle engine not only is related to the pressure gain of the combustor,but also needs to optimize the engine structure to reduce the total pressure loss.
基金supported by the National Natural Science Foundation of China(No.11872375)the National Science Foundation for Young Scientists of China(Nos.11802323,11902351,and 12102462)。
文摘Experimental observations together with theoretical analysis were conducted to investigate the break phenomenon and the corresponding mechanisms of self-pulsation for a liquid-centered swirl coaxial injector with recess number of RN=1.Instantaneous spray images were obtained based on background light imaging technology with a high-speed camera.By dynamic analysis of the flow process of the liquid sheet in the recess chamber,a 1D self-pulsation theoretical model was established,and the self-sustaining mechanisms of self-pulsation were analyzed in depth.The results show that the increase of the momentum flux ratio will lead to the occurrence of the break phenomenon of self-pulsation for the injector with a larger recess length,and the frequency and intensity of self-pulsation before and after the break phenomenon differ significantly.The flow dynamics in the recess chamber sequentially transform from a periodic expansion-dominated flow to a stable flow,and then develop to a periodic contraction-dominated flow during the break process of self-pulsation.With the occurrence of self-pulsation before the break phenomenon,the liquid sheet has little effect on the pressure disturbance in the recess chamber.In contrast,with the occurrence of self-pulsation after the break phenomenon,the pressure disturbance is obviously affected by the liquid sheet.Based on the theoretical analysis model of self-pulsation,the self-pulsation frequency can be predicted.Furthermore,the self-sustaining mechanism of self-pulsation before and after the break phenomenon is preliminarily confirmed.The energy transfer between the gas-and liquid-phase is an important factor for maintaining the self-pulsation process.