Pressure Measurement on Suction Surface of a Single Vane Using Pressure-sensitive Paint

Global pressure distribution on the suction surface of a single vane in a transonic cascade wind tunnel is measured with the help of intensity-based pressure-sensitive paint (PSP) technique using a type of temperature-insensitive fluorescent paint and a self-made measurement system. This measurement is conducted at the outlet of the cascade wind tunnel at the Mach numbers 0.3 and 0.4, attack angle about –20°, ambient pressure 95.4 kPa and temperature 15 °C. The vane under study owns a large camber angle of ...

Pressure field measurements on large-scale propeller blades using pressure-sensitive paint

Pressure-sensitive paint(PSP)is a global pressure measurement technique.Compared with pressure transducers,PSP has significant advantages such as high spatial resolution and a lack of contact when applied to fast-rotating blades.However,due to the limitations of other pressure measurement techniques,the validation of PSP measurements on fast-rotating blades is generally difficult.In this work,a comprehensive study including PSP measurement,force balance measurement,and simulation was conducted on a 1 m-diameter propeller at the China Aerodynamic Research and Development Center.First,our computational fluid dynamics(CFD)code was validated by comparing the calculated aerodynamic thrust with the results from force balance measurements.Then,the pressure distributions on the propeller blade obtained by PSP were carefully compared with the CFD results under different working conditions.The results of PSP measurements,force balance measurements,and CFD showed good agreement,and the PSP measurement errors were estimated to be less than 5% of the dynamic pressure at the blade tip.Finally,the variations in pressure distribution under different rotating speeds and free-stream velocities were discussed.

Thermal stability improvement of sprayable fast-responding pressure-sensitive paint for measurement above 100℃

The thermal stability of sprayable fast-responding Pressure-Sensitive Paint(fast PSP)was investigated to explore the possibility for application in turbomachinery and hypersonic research with temperature above 100℃.The first part of the study focused on a widely-used Polymer Ceramic PSP(PC-PSP).The effects of thermal degradation on its key sensing properties,including luminescent intensity,pressure sensitivity and response time,were examined for a temperature range from 60 to 100℃.Severe degradation in intensity and pressure sensitivity was found as temperature reached 70℃or higher,which would cause failure of PSP application in these conditions.Subsequently,a fast-responding Mesoporous-Particle PSP(MP-PSP)was developed which did not show degradation effects until 140℃.The greatly improved thermal stability of MP-PSP was attributed to:selection of polymer with higher glass transition temperature(polystyrene)to delay the saturation effect of oxygen quenching as temperature increased;porous and hollow structure of particles for luminophore deposition that minimizes polymer–luminophore interaction.This new paint formulation has significantly raised the upper temperature limit of fast PSP and offers more opportunities for applications in harsh environment.

Investigation on aerodynamic force effect of vacuum plumes using pressure-sensitive paint technique and CFD-DSMC solution

Pressure-sensitive paint(PSP) technique was employed to experimentally investigate the aerodynamic force effect of vacuum plume in this study. The characterization and comparison for two types of PSP were firstly conducted in an air pressure range from0.05 to 5000 Pa. The PSPs were prepared using PtTFPP as the active dye and different binders, i.e., polymer-ceramic(PC) and poly(1-trimethylsilyl-1-propyne) [poly(TMSP)]. The static calibrations showed that PtTFPP/poly(TMSP) had a higher pressure sensitivity and a lower temperature dependency compared to PtTFPP/PC in this pressure range. The pressure distributions of a single and two interacting plumes impinging onto a flat plate model were measured using PSP technique. The experimental data were compared to numerical solutions that combined both the computed fluid dynamics(CFD) and direct simulation Monte Carlo(DSMC) methods. Remarkable agreements were achieved, demonstrating the feasibility and accuracy of the numerical approach.Finally, the aerodynamic force effect of interacting plumes at different separation distances was investigated numerically.

A pressure-sensitive rheological origin of high friction angles of granular matter observed in NASA–MGM project

An abnormally high peak friction angle of Ottawa sand was observed in(National Aeronautics and Space Administration) NASA–(Mechanics of Granular Materials) MGM tests in microgravity conditions on the space shuttle. Previous investigations have been unsuccessful in providing a constitutive insight into this behavior of granular materials under extremely low effective stress conditions. Here, a recently proposed unified constitutive model for transient rheological behavior of sand and other granular materials is adopted for the analytical assessment of high peak friction angles. For the first time, this long-eluded behavior of sand is attributed to a hidden rheological transition mechanism, that is not only rate-sensitive, but also pressure-sensitive. The NASA–MGM microgravity conditions show that shear-tests of sand can be performed under abnormally low confining stress conditions. The pressure-sensitive behavior of granular shearing that is previously ignored is studied based on the μ(I) rheology and its variations. Comparisons between the model and the NASA microgravity tests demonstrate a high degree of agreement. The research is highly valid for pressure-sensitive and rate-dependent problems that occur during earthquakes, landslides, and space exploration.

The asymptotic field of mode Ⅰ quasi-static crack growth on the interface between a rigid and a pressure-sensitive material

A mechanical model of the quasi-static interface of a mode I crack between a rigid and a pressure-sensitive viscoelastic material was established to investigate the mechanical characteristic of ship-building engineering hi-materials. In the stable growth stage, stress and strain have the same singularity, ie （σ, ε） ∝ r^-1/（n-1）. The variable-separable asymptotic solutions of stress and strain at the crack tip were obtained by adopting Airy＇s stress function and the numerical results of stress and strain in the crack-tip field were obtained by the shooting method. The results showed that the near-tip fields are mainly governed by the power-hardening exponent n and the Poisson ratio v of the pressure-sensitive material. The fracture criterion of mode I quasi-static crack growth in pressure-sensitive materials, according to the asymptotic analyses of the crack-tip field, can be viewed from the perspective of strain.

Numerical Simulation of Liquid-Solid Coupling in Multi-Angle Fractures in Pressure-Sensitive Reservoirs

This study clarifies the seepage characteristics of complex fractured pressure-sensitive reservoirs,and addresses a common technological problem,that is the alteration of the permeability degree of the reservoir bed(known to be responsible for changes in the direction and velocity of fluid flows between wells).On the basis of a new pressuresensitive equation that considers the fracture directional pressure-sensitive effect,an oil-gas-water three-phase seepage mathematical model is introduced,which can be applied to pressure-sensitive,full-tensor permeability,ultralow-permeability reservoirs with fracture-induced anisotropy.Accordingly,numerical simulations are conducted to explore the seepage laws for ultralow-permeability reservoirs.The results show that element patterns have the highest recovery percentage under a fracture angle of 45°.Accounting for the pressure-sensitive effect produces a decrease in the recovery percentage.Several patterns are considered:inverted five-seven-and nine-spot patterns and a cross-row well pattern.Finally,two strategies are introduced to counteract the rotation of the direction of the principal permeability due to the fracture directional pressure-sensitive effect.

Pressure-sensitive plasticity of lithiated silicon in Li-ion batteries

Lithiation-induced plasticity is a key factor that enables Si electrodes to maintain long cycle life in Li-ion batteries. We study the plasticity of various lithiated sili-con phases based on first-principles calculations and iden-tify the linear dependence of the equivalent yield stress on the hydrostatic pressure. Such dependence may cause the compression-tension asymmetry in an amorphous Si thin film electrode from a lithiation to delithiation cycle, and leads to subsequent ratcheting of the electrode after cyclic lithiation. We propose a yield criterion of amorphous lithi-ated silicon that includes the effects of the hydrostatic stress and the lithiation reaction. We further examine the micro-scopic mechanism of deformation in lithiated silicon under mechanical load, which is attributed to the flow-defects mediated local bond switching and cavitation. Hydrostatic compression confines the flow defects thus effectively strength-ens the amorphous structure, and vice versa.

Element Analysis of Instrumented Sharp Indentations into Pressure-sensitive Materials

Finite element analysis was carried out to investigate the conical indentation response of elastic-plastic solids within the framework of the hydrostatic pressure dependence and the power law strain hardening. A large number of 40 difierent combinations of elasto-plastic properties with n ranging from 0 to 0.5 and σy/E ranging from 0.0014 to 0.03 were used in the computations. The loading curvature C and the average contact pressure Pave were considered within the concept of representative strains and the dimensional analysis.Dimensionless functions associated with these two parameters were formulated for each studied value of the pressure sensitivity. The results for pressure sensitive materials lie between those for Von Mises materials and the elastic model.

Roles of the ocular pressure, pressure-sensitive ion channel, and elasticity in pressure-induced retinal diseases

The intraocular pressure inside the human eye maintains 10–21 mmHg above the atmospheric pressure.Elevation of intraocular pressure is highly correlated with the retinopathy in glaucoma,and changes in the exterior pressure during mountain hiking,air traveling,and diving may also induce vision decline and retinopathy.The pathophysiological mechanism of these pressure-induced retinal disorders has not been completely clear.Retinal neurons express pressure-sensitive channels intrinsically sensitive to pressure and membrane stretch,such as the transient receptor potential channel(TRP)family permeable to Ca^2+and Na^+and the two-pore domain K channel family.Recent data have shown that pressure excites the primate retinal bipolar cell by opening TRP vanilloid 4 to mediate transient depolarizing currents,and TRP vanilloid 4 agonists enhance the membrane excitability of primate retinal ganglion cells.The eyeball wall is constructed primarily by the sclera and cornea of low elasticity,and the flow rate of the aqueous humor and intraocular pressure both fluctuate,but the mathematical relationship between the ocular elasticity,aqueous humor volume,and intraocular pressure has not been established.This review will briefly review recent literature on the pressure-related retinal pathophysiology in glaucoma and other pressure-induced retinal disorders,the elasticity of ocular tissues,and pressure-sensitive cation channels in retinal neurons.Emerging data support the global volume and the elasticity and thickness of the sclera and cornea as variables to affect the intraocular pressure level like the volume of the aqueous humor.Recent results also suggest some potential routes for TRPs to mediate retinal ganglion cell dysfunction:TRP opening upon intraocular pressure elevation and membrane stretch,enhancing glutamate release from bipolar cells,increasing intracellular Na^+,Ca^2+concentration in retinal ganglion cells and extracellular glutamate concentration,inactivating voltage-gated Na^+channels,and causing excitotoxicity and dysfunction of retinal ganglion cells.Further studies on these routes likely identify novel targets and therapeutic strategies for the treatment of pressure-induced retinal disorders.

De Novo Synthesis of Biopaint Using Transformed Bacteria: Analysis of Spectral Intensity Trends and Comparison to Commercial Paint

Background: Commercial paint pigments contain toxic heavy metals that harm humans and pollute the environment. To mitigate these harms, ecologically safe pigments are necessary. Objective: This experiment aims to create a biopaint de-novo using transformed Escherichia coli bacteria and compare it to commercial paint. Methods: Genetically engineered E. coli bacteria producing magenta pigment were grown in petri dishes. The pigment protein was extracted, filtered, and dehydrated into a crystalline powder. This was mixed with acrylic medium to make biopaint. The biopaint and commercial paint were applied on acrylic paper;red, green, blue, and total spectral intensities were measured daily under different testing conditions. Spectral intensity variability was measured and compared using the Coefficient of Variation (CV). Trends in spectral intensity were analyzed using regression analysis. Results: The differences in the CV of biopaint to commercial paint were less than 20% under all testing conditions. Spectral intensities for both biopaint and commercial paint did not show any significant change during the testing period under the conditions of room temperature, heat, and humidity. However, under the cold testing condition, biopaint showed a slight but statistically significant (p-value Conclusion: This experiment proves that E. coli-derived pigments can be used to make biopaint which has a similar durability to commercial paint as measured by the spectral intensities.

Investigation of the Film Formation in Dynamic Air Spray Painting

To accurately predict the film thickness distribution during dynamic spraying performed with air guns and support accordingly the development of intelligent spray painting,the spray problem was analyzed numerically.In particular,the Eulerian-Eulerian approach was employed to calculate the paint atomization and film deposition process.Different spray heights,spray angles,spray gun movement speeds,spray trajectory curvature radii,and air pressure values were considered.Numerical simulation results indicate that the angle of spray painting significantly affects the velocity of droplets near the spray surface.With an increase in the spraying angle,spraying height and spray gun movement speed,the maximum film thickness decreases to varying degrees,and the uniformity of the film thickness also continuously worsens.When the spray gun moves along an arc trajectory,at smaller arc radii,the film thickness on the inside of the arc is slightly greater than that on the outside,but the impact on the maximum film thickness is minimal.Increasing air pressure expands the coating coverage area,results in finer atomization of paint droplets,and leads to a thinner and a more uniform paint film.However,if the pressure is too high,it can cause paint splattering.Using the orthogonal experimental method,multiple sets of simulation calculations were conducted,and the combined effects of spraying height,spray angle,and spray gun movement speed on the film thickness distribution were comprehensively analyzed to determine optimal configurations.Finally,the reliability of the numerical simulations was validated through dynamic spray painting experiments.

Drishti Paint 3.2:a new open-source tool for both 2D and 3D segmentation

X-ray computed tomography(CT)has been an important technology in paleontology for several decades.It helps researchers to acquire detailed anatomical structures of fossils non-destructively.Despite its widespread application,developing an efficient and user-friendly method for segmenting CT data continues to be a formidable challenge in the field.Most CT data segmentation software operates on 2D interfaces,which limits flexibility for real-time adjustments in 3D segmentation.Here,we introduce Curves Mode in Drishti Paint 3.2,an open-source tool for CT data segmentation.Drishti Paint 3.2 allows users to manually or semi-automatically segment the CT data in both 2D and 3D environments,providing a novel solution for revisualizing CT data in paleontological studies.

Indoor Formaldehyde Removal Techniques through Paints: Review

Due to its ability to cause illnesses and discomfort even at low concentrations, formaldehyde pollution of indoor air poses a significant risk to human health. Sources of formaldehyde in indoor environments include textiles, paints, wallpapers, glues, adhesives, varnishes, and lacquers;furniture and wooden products like particleboard, plywood, and medium-density fiberboard that contain formaldehyde-based resins;shoe products;cosmetics;electronic devices;and other consumer goods like paper products and insecticides. According to the World Health Organisation, indoor formaldehyde concentrations shouldn’t exceed 0.1 mg/m3. The methods include membrane separation, plasma, photocatalytic decomposition, physisorption, chemisorption, biological and botanical filtration, and catalytic oxidation. Materials based on metal oxides and supported noble metals work as oxidation catalysts. Consequently, a paint that passively eliminates aldehydes from buildings can be developed by adding absorbents and formaldehyde scavengers to the latex composition. It will be crucial to develop techniques for the careful detection and removal of formaldehyde in the future. Additionally, microbial decomposition is less expensive and produces fewer pollutants. The main goal of future research will be to develop a biological air quality control system that will boost the effectiveness of formaldehyde elimination. The various methods of removing formaldehyde through paints have been reviewed here, including the use of mixed metal oxides, formaldehyde-absorbing emulsions, nano titanium dioxide, catalytic oxidation, and aromatic formaldehyde abating materials that can improve indoor air quality.

Co-pyrolysis of Sewage Sludge with Paint Sludge: Kinetics and Thermodynamic Analysis via Iso-conversional Methods

This study explored the synergistic interaction of sewage sludge(SS)and automotive paint sludge(PS)during co-pyrolysis for the optimized treatment of sewage sludge in cement kiln systems,utilizing thermogravimetric analysis(TGA)and thermogravimetric-mass spectrometry(TGA-MS).The result reveals the coexisting synergistic and antagonistic effects in the co-pyrolysis of SS/PS.The synergistic effect arises from hydrogen free radicals in SS and catalytic components in PS,while the main source of the antagonistic effect is that,during the mechanical mixing process,the SS/PS is converted from the particulate form into a dough-like rubbery which contributes to the film-forming effect,hindering the volatilization of volatile components.SS/PS co-pyrolysis reduces the yielding of tar production while increasing coke and gas.This study will provide some in-depth insights into the co-pyrolysis of SS/PS,and offer theoretical support for the subsequent research on the collaborative disposal processes in cement kilns.

Improved Scatter Search Algorithm for Multi-skilled Personnel Scheduling of Ship Block Painting

This paper focuses on the optimization method for multi-skilled painting personnel scheduling.The budget working time analysis is carried out considering the influence of operating area,difficulty of spraying area,multi-skilled workers,and worker’s efficiency,then a mathematical model is established to minimize the completion time. The constraints of task priority,paint preparation,pump management,and neighbor avoidance in the ship block painting production are considered. Based on this model,an improved scatter search(ISS)algorithm is designed,and the hybrid approximate dynamic programming(ADP)algorithm is used to improve search efficiency. In addition,the two solution combination methods of path-relinking and task sequence combination are used to enhance the search breadth and depth. The numerical experimental results show that ISS has a significant advantage in solving efficiency compared with the solver in small scale instances;Compared with the scatter search algorithm and genetic algorithm,ISS can stably improve the solution quality. Verified by the production example,ISS effectively shortens the total completion time of the production,which is suitable for scheduling problems in the actual painting production of the shipyard.

The Study of “Imitation” Aesthetics in Ancient Painting Theory-Taking the Chinese and Western Sources as an Example

The theory of“imitation”in painting occupies a leading position in western art,which originated from the theory of“imitation”in ancient Greece,and has become one of the art theories affecting the world through the continuous development of later generations.Through the exploration of the source of“imitation”in China and the West,there are some comments on the meaning of“imitation”in Chinese classical painting theory,such as“transfer model writing”and“image form”,which is obvious differences from the west.Traditional Chinese painting is a combination of careful observation of natural things and subjective emotions to express their own aesthetic feelings,and ultimately form a vivid artistic conception.Modern imitation is borrowed from Western imitation.In fact,imitation in traditional painting has its own meaning,which contains Chinese aesthetic thought.“Imitation”aesthetics is unique in traditional Chinese painting and is the most important form of painting art.

Analysis of Color and Artistic Conception in Painting Art

The charm of painting,as a bright pearl in the treasure house of culture,lies in its visual language constructed through colors and lines,which conveys the artist’s unique perception of life and profound emotions.Color,as the most intuitive and expressive language in painting,is not only a simple reproduction of material colors but also a projection of the artist’s inner world.Artistic conception,as a core concept in traditional Chinese painting theory,refers to the emotional atmosphere and spiritual mood embedded in paintings.The purpose of this paper is to discuss the interaction between color and mood in painting art,to analyze the techniques of using color in different painting styles and their influence on the creation of mood,and to provide new perspectives and methods for the creation of paintings.

Exploration of the Expression of Color Emotion in Oil Painting Sketch Creation

This paper deeply analyzes the expression of color emotion in oil painting sketch creation.Starting with the three basic attributes of color theory(hue,lightness,and purity),this paper discusses its emotional symbolic significance and the relationship between contrast and harmony.By interpreting the works of artists such as Van Gogh’s Sunflower,Monet’s Rouen Cathedral,and Cézanne’s Mont Sainte-Victoire,this paper shows the unique charm of different colors in conveying emotions,creating atmosphere,and expressing themes.At the same time,it is expounded that in the creation of an oil painting sketch,the effective expression of color emotion can be realized by observing nature,using subjective colors,and reasonable composition and layout of colors,so as to enhance the artistic value of the works.

Analysis of Viewing Paintings from the Perspective of Iconography

Distinguished from purely formalistic research methods,iconography pursues the interpretation of the hidden historical and humanistic connotations behind artworks,and is a discipline that combines visual text and content analysis methods.Combining the three stages of iconography proposed by Panofsky,the paper studies Shizeng Chen’s Viewing Paintings from the perspective of iconography,summarizing the formation and change of the images and contents of the artworks in the cultural system and civilization at that time,as well as their implied ideology,and analyzing the hidden spirit of the times and the historical significance behind them,so as to expound their iconographic significance.Through an in-depth discussion at three levels:pre-pictorial iconographic description,iconographic analysis,and iconographic interpretation,the facts and surface contents reproduced in the images,the traditional level of literary,artistic,and cultural knowledge,as well as the interpretation of the potential meanings are revealed.