期刊文献+
共找到1篇文章
< 1 >
每页显示 20 50 100
Effects of Width Variation of Pressure-Side Winglet on Tip Flow Structure in a Transonic Rotor 被引量:1
1
作者 CUI Weiwei WANG Xinglu +5 位作者 YAO Fei ZHAO Qingjun LIU Yuqiang LIU Leinan WANG Cuiping YANG Laishun 《Journal of Thermal Science》 SCIE EI CAS CSCD 2022年第1期141-150,共10页
Tip leakage flow has become one of the major triggers for rotating stall in tip region of high loading transonic compressor rotors.Comparing with active flow control method,it’s wise to use blade tip modification to ... Tip leakage flow has become one of the major triggers for rotating stall in tip region of high loading transonic compressor rotors.Comparing with active flow control method,it’s wise to use blade tip modification to enlarge the stable operating range of rotor.Therefore,three pressure-side winglets with the maximum width of 2.0,2.5 and 3.0 times of the baseline rotor,are designed and surrounded the blade tip of NASA rotor 37,and the three new rotors are named as RPW1,RPW2,and RPW3 respectively.The numerical results show that the width of pressure-side winglet has significant influence on the stall margin and the minimum throttling massflow of rotor,while it produces less effect on the choking massflow and the peak efficiency of new rotors.As the width of the pressure-side winglet increases from new rotor RPW1 to RPW3,the strength of leakage massflow has been attenuated dramatically and a reduction of 20%in leakage massflow rate has appeared in the new rotor RPW3.By contrast,the extended blade tip caused by winglet has not introduced much more aerodynamic losses in tip region of rotor,and the new rotors with different width of pressure-side winglet have the similar peak efficiency to the baseline.The new shape of the leakage channel over blade tip which replaces of the static pressure difference near blade tip has dominated the behavior of the leakage flow in tip gap.As both the new aerodynamic boundary and throat in tip gap have reshaped by the low-velocity flow near the solid wall of extended blade tip,the discharging velocity and massflow rate of leakage flow have been suppressed obviously in new rotors.In addition,the increasing inlet axial velocity at the entrance of new rotor has increased slightly as well,which is attributed to the less blockage in the tip region of new rotor.In consideration of the increased inlet axial velocity and the weakened leakage flow,the new rotor presents an appropriately linear increase of the stall margin when the width of pressure-side winglet increases,and has a nearly 15%increase in new rotor RPW3. 展开更多
关键词 pressure-side winglet blade tip aerodynamic losses leakage channel stall margin
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部