Effects on Sedimentary Processes via Upper Triassic Climate Forcing Caused by Multiple Impacting and Large Igneous Provinces (LIP)-Rifting/Degassing: Jordanian Platform/Arabian Plate and Germanic Basin/Central Europe

Upper Triassic sedimentary systems of both the Arabian Plate and the Germanic Basin reveal climate- and plate tectonic-forced effects through certain time-intervals experienced by architectural elements, lithofacies types, unconformities, flash flood deposits, maximum flooding surfaces/sequence boundary (MFS/SB), mineralogy, and isotope anomalies. Further, Moon recession and changes of Earth’s rotation velocity (core/mantle boundary) are associated with multiple impacting and large igneous provinces/Mid Oceanic Ridge Basalt, LIP/MORB-rifting/degassing. While acidification (by degassing, sturz-rain) does influence tectosilicates and carbonates, montmorillonite represents a key mineral as transformation of volcanic/impact glass (Tephra) to be found as co-components in and in certain pelite units as “boundary clay-suspicions” (mixture of eolian paleoloess, pelite, paleosol, and tephra → tuffite). Obviously, unconformities and sequence boundaries of both study areas separate and dislocate interrupted ∂13C and 87Sr/86Sr-data groups along the isotope curves. Both Proto-Arctic Ocean rifting/degassing comprising kimberlitic pyroclastic eruptions and Neotethys rifting/degassing as well as multiple impacting played the most important role during the Norian, followed by the incipient Central Atlantic Magmatic Provinces rifting since the Rhaetian. The following associations are encountered and dealt with in this study: Sequence boundaries-∂13C, maximum flooding surfaces-(FUCs)-∂13C, unconformities-plate motion, tephra-pelite-tuffite-montmorillonite. Norian: maximum flooding surfaces (MFSs)-“paleosol”/boundary clay?-rifting-volcanism, Moon/Earth data change. So the Norian (~221 - 206 Ma) hosts anomalous “amalgamated maximum flooding surfaces (MFSs)”, amalgamated paleosol (Jordanian Platform), multiple impacting (~219 - 214 Ma), the maximum opening of the Proto-Arctic Ocean (PAO) (~230 - 200 Ma), Neo-Tethys (NT)-subvolcanic (sills, dikes) in the NE Dead Sea area prior the Rhaetian, and a significant change of Earth/Moon relation data. The study concludes that rare and extreme events are very strongly shaping the geologic constellations in the Earth System.

Effect of different cold air intensities and their lagged effects on outpatient visits for respiratory illnesses in Handan in different seasons

本文利用2016年到2019年邯郸市气象要素和呼吸系统疾病门诊数据,分析了不同季节不同强度的冷空气过程及其对呼吸系统疾病的影响,结果显示:尽管呼吸系统疾病在冬季高发,夏季最低,但冷空气对呼吸系统疾病的影响在夏,春季最大,就诊人数分别在冷空气日后两天和五天增加18.4%和13.3%,而冬季就诊人数在冷空气日后三天仅增加3.2%.冷空气对疾病影响的滞后时间在夏,秋和冬季随冷空气强度的增加而减少,而春季的滞后时间总是很长.这些发现可为科学应对气候异常导致的人群健康风险提供针对性依据.

A Study on the Effectiveness of Process-oriented Approach in ESL English Writing Teaching in YAU

This study sets out to conduct the effectiveness of process-oriented approach on the ESL writing teaching for non-Eng-lish majors in Yunnan Agricultural University(YAU),with the aim of enhancing the students' English writing proficiency andscores.120 non-English major sophomores and 10 English teachers from YAU are involved in it.With the results of questionnaire,interview and the composition scores of the target students,the findings indicate that the students have a positive attitude towardsprocess-oriented writing approach and it can help them write better and make the writing class more interesting.

Effect of Pouring Process on the Microstructures of Semi-Solid AlSi_7Mg Alloy

The effect of different pouring temperatures and different pouring heights, the distance between the mouth of the pouring ladle and the top of the mold, on the microstructure of AlSi7Mg alloy have been researched in the paper. When the pouring temperature is close to the liquidus temperature, the primary alpha -Al in 'the billets of AlSi7Mg alloy solidified into spherical and nodular fine grains distributed homogeneously. The optimum pouring temperature for semi-solid AlSi7Mg billet with spherical or nodular primary alpha -Al is 615 degreesC. At the same pouring temperature, the higher the pouring ladle, the more easily the spherical and nodular primary alpha -Al obtained in the semi-solid AlSi7Mg billet. When the pouring temperature is close to the liquidus temperature and the pouring ladle is relatively high, it is the great cooling rate, the flow of the molten allay caused by pouring and the large simultaneous solidification region induced by the near liquidus temperature, that promote the formation of spherical or nodular primary cr-Al.

Effects of the differences between the ITRF2000 and ITRF2005 models in GNSS data processing

In comparison with the ITRF2000 model, the ITRF2005 model represents a significant improvement in solution generation, datum definition and realization. However, these improvements cause a frame difference between the ITRF2000 and ITRF2005 models, which may impact GNSS data processing. To quantify this im- pact, the differences of the GNSS results obtained using the two models, including station coordinates, base- line length and horizontal velocity field, were analyzed. After transformation, the differences in position were at the millimeter level, and the differences in baseline length were less than 1 ram. The differences in the hori- zontal velocity fields decreased with as the study area was reduced. For a large region, the differences in these value were less than 1 mm/a, with a systematic difference of approximately 2 degrees in direction, while for a medium-sized region, the differences in value and direction were not significant.

Effects of Pr substitution on the hydrogenating process and magnetocaloric properties of La1-xPrxFe11.4Si1.6Hy hydrides

In this paper, we study the effects of Pr substitution on the hydrogenating process and magnetocaloric properties of La（1-x）PrxFe11.4Si1.6Hy hydrides. The powder x-ray diffraction patterns of the La1-xPrxFe11.4Si1.6 and its hydrides show that each of the alloys is crystallized into the single phase of cubic Na Zn13-type structure. There are hydrogen-absorbing plateaus under 0.4938 MPa and 0.4882 MPa in the absorbing curves for the La0.8Pr0.2Fe11.4Si1.6 and La0.6Pr0.4Fe11.4Si1.6 compounds. The releasing processes lag behind the absorbing process, which is obviously different from the coincidence between absorbing and releasing curves of the La Fe11.4Si1.6 compound. The remnant hydrogen content for La0.6Pr0.4Fe11.4Si1.6 is significantly more than that for La0.8Pr0.2Fe11.4Si1.6 after hydrogen desorption, indicating that more substitutions of Pr for La are beneficial to retaining more hydrogen atoms in the alloys. The values of maximum magnetic entropy change are 14.91 J/kg·K and 17.995 J/kg·K for La0.8Pr0.2Fe11.4Si1.6H0.13 and La0.6Pr0.4Fe11.4Si1.6H0.87,respectively.

The effects of process conditions on the plasma characteristic in radio-frequency capacitively coupled SiH_4/NH_3/N_2 plasmas: Two-dimensional simulations

A two-dimensional （2D） fluid model is presented to study the behavior of silicon plasma mixed with SiH4 , N2 , and NH3 in a radio-frequency capacitively coupled plasma （CCP） reactor. The plasma–wall interaction （including the deposition） is modeled by using surface reaction coefficients. In the present paper we try to identify, by numerical simulations, the effect of variations of the process parameters on the plasma properties. It is found from our simulations that by increasing the gas pressure and the discharge gap, the electron density profile shape changes continuously from an edge-high to a center-high, thus the thin films become more uniform. Moreover, as the N2 /NH3 ratio increases from 6/13 to 10/9, the hydrogen content can be significantly decreased, without decreasing the electron density significantly.

Simulation Experiments of Land Surface Physical Processes and Ecological Effect over Different Underlying Surface

Based on the existing Land Surface Physical Process Models(Deardorff, Dickinson, LIU, Noilhan, Seller, ZHAO), a Comprehensive Land Surface Physical Process Model (CLSPPM) is developed by considering the different physical processes of the earth's surface-vegetation-atmosphere system more completely. Compared with SiB and BATS, which are famous for their detailed parameterizations of physical variables, this simplified model is more convenient and saves much more computation time. Though simple, the feas...

Doppler effect of the rupture process of the great M_W7.9 Wenchuan earthquake

In this study we performed a classical spectrum analysis of seismic waveforms recorded at far field stations of the great MW7.9 Wenchuan earthquake to observe the shifts of the corner frequency with azimuth due to the Doppler effect.Our results show that this damaging great earthquake had a dominating rupture propagation direction of 64.0°.The equivalent radius of the fault rupture surface was estimated to be 33 km,yielding the rupture area of about 3 500 km2.Thus the length of the rupture fault surface is about 230 km if the depth（or width） extent is 15 km.The computer program developed in this study can quickly provide the information about the source of a future large（damaging） earthquake,which could be very useful for predicting aftershocks and planning the rescue operations.

Synergistic effects of 4-nitrophenol degradation using gamma irradiation combined with a advanced oxidation process

The radiation-induced degradation of 4-nitrophenol(4-NP) was performed in combination with a Fenton reagent, H_2O_2, and Ti O_2 nanoparticles to investigate the synergetic effects of radiolytical degradation combined with other advanced oxidation processes. The experimental results indicated that the degradation efficiency of 4-NP was 87.5, 57.4, and 41.0 % at a dose of 20 k Gy when its initial concentration was 100, 200, and 350 mg/L, respectively. Radiation combined with H_2O_2, the Fenton method,and Ti O_2 remarkably increased the degradation efficiency of 4-NP, showing the synergetic effects. Radiation may enhance the biodegradability of 4-NP, suggesting that it has the potential to be used as a pretreatment method in combination with the biological method for the treatment of industrial wastewater containing toxic organic pollutants. Major intermediates during the 4-NP degradation process were identified and a possible degradation pathway was tentatively proposed.

Simulation of the Microphysical Processes and Effect of Latent Heat on a Heavy Rainfall Event in Beijing

An extraordinary rainstorm that occurred in Beijing on 21 July 2012 was simulated using the Weather Research and Forecasting model. The results showed that:(1) The two precipitation phases were based on a combination of cold cloud processes and warm cloud processes. The accumulated conversion amount and conversion rate of microphysical processes in the warm-area phase were all much larger than those in the cold front phase.(2) 72.6% of rainwater was from the warm-area phase. Rainwater mainly came from the melting of graupel and the melting of snow, while the accretion of cloud water by rain ranked second.(3) The net heating rate with height appeared as an overall warming with two strong heating centers in the lower and middle layers of the troposphere and a minimum heating center around the melting layer. The net heating effect in the warm-area phase was stronger than that in the cold front phase.(4) Warm cloud processes contributed most to latent heat release, and the thermal effect of cold cloud processes on the storm in the cold front phase was enhanced compared to that in the warm-area phase.(5) The melting of graupel and snow contributed most to latent heat absorption, and the effect of the evaporation of rainwater was significantly reduced in the cold front phase.

Three-dimensional simulation of fabrication process-dependent effects on single event effects of SiGe heterojunction bipolar transistor

The fabrication process dependent effects on single event effects （SEEs） are investigated in a commercial silicon- germanium heterojunction bipolar transistor （SiGe HBT） using three-dimensional （3D） TCAD simulations. The influences of device structure and doping concentration on SEEs are discussed via analysis of current transient and charge collection induced by ions strike. The results show that the SEEs representation of current transient is different from representation of the charge collection for the same process parameters. To be specific, the area of C/S junction is the key parameter that affects charge collection of SEE. Both current transient and charge collection are dependent on the doping of collector and substrate. The base doping slightly influences transient currents of base, emitter, and collector terminals. However, the SEEs of SiGe HBT are hardly affected by the doping of epitaxial base and the content of Ge.

Non-Equilibrium Grain-Boundary Segregation of Phosphorus And the Effective Time in Step Cooling Process

The non-equilibrium grain-boundary segregation of phosphorus in step cooling process in an industrial steel, 12CrlMoV, is studied based on the effective-time-method and compared with that in isothermal holding process. The non-equilibrium grain-boundary segregation concentration of phosphorus was measured with Auger Electron Spectroscopy (AES) and calculated based on the kinetic equations of non-equilibrium grain-boundary segregation. Results show that the calculated result is in good accordance with the experimental observation.

Effect of Nonlinear Dynamic Process on Formation and Breakdown of Blocking

With the L-P approximate method(variation of parameter method), a barotropic channel model in β-plane is used to study the effect of nonlinear interaction between two waves with different scales on the formation of blocking. The approximate analytical solution, which can describe the process of the blocking formation, maintenance and breakdown, has been obtained by using the method of aproximate expansion. The importance of nonlinear interaction between two waves with different scales is stressed in the solution. The result suggests that the nonlinear interaction is the main dynamic process of the blocking formation. Some required conditions of blocking formation are also discussed.

EFFECT OF PARTICLE SIZE ON THE FILMING PROCESS OF POLYSTYRENE LATEX STUDIED BY AFM

The film formation process of micro-PS particles (diameter 742 nm) and nano-PS particles (diameter 29 nm) was studied by atomic force microscopy and differential scanning calorimetry. During a step heating process, the particles were annealed for 0.5 h at each selected temperature. It was found that the deformation and interdiffusion temperatures of the micro-PS particles are ca. 120-130degreesC and 140-150degreesC, that of the nano-PS particles are 90degreesC and 100-110degreesC respectively. The DSC traces of nano-PS particles showed that there was an exothermic peak near T-g after annealing for 0.5 h at the selected temperatures below 90degreesC; otherwise, the exothermic peak disappeared after annealing at 100degreesC or above. Compared with the micro-PS particles, the sintering process of nano-PS particles occurs at much lower temperature determined by the confined state of polymer chains with higher conformational energy in nano-particles, and completes in a much narrower temperature range driven mainly by the larger total surface energy.

Effect of alloying elements and processing parameters on the Portevin–Le Chatelier effect of Al–Mg alloys

The effects of alloying elements and processing parameters on the mechanical properties and Portevin-Le Chatelier effect of A1-Mg alloys developed for inner auto body sheets were investigated in detail. Tensile testing was performed in various Zn and Mg contents under different annealing and cold-rolling conditions. In the results, the stress drop and reloading time of serrations increase with increasing plastic strain and exhibit a common linear relationship. The increase rates of stress drop and reloading time increase with increasing Mg or Zn content. The alloys with a greater intensity of serrated yielding generally exhibit a greater elongation. The stress drop and reloading time of serrations decrease with increasing grain size in the case of the annealed samples. The cold-rolled sample exhibits the most severe serra- tion because it initially contains a large number of grain boundaries and dislocations.

THE EFFECTS OF SOLVENTS ON THE INTRAMOLECULAR PROCESSES ——NMR STUDY

The influences of methanol-d_4(MeOD), dimethylsulfoxide-d_6 (Me_2SO(D)) and dioxane(C_4H_8O_2) solvents on the intramolecular processes are studied by NMR. It has been shown that the addition of these solvents in CdEGTA complex aqueous solution can increase the rate constant (k) of the nitrogen inversion and decrease the activation energy of this process. The linear relations between In(k) and the reciprocal of the solvent dielectric constants (1/ε) are obtained for all the three solvents.

Effects of Different Processed Products of Ilex hainanensis Merr on Rats with Hyperlipidemia

[Objectives] This study aimed to investigate the hypolipidemic effects of different processed products of Ilex hainanensis Merr to provide experimental basis for the research on the hypolipidemic mechanism of I. hainanensis Merr. [Methods] SD rats were fed high-fat diet to establish hyperlipidemia rat models. The hyperlipidemia rats were administered with different processed products of I. hainanensis Merr by gavage to investigate the preventive and therapeutic effects of the medicinal material. [Results] The levels of total cholesterol(TC), triglyceride(TG), low density lipoprotein cholesterol(LDL-C) in the rats fed high-fat diet were significantly higher than those in of the control group(P<0.01), indicating successful modeling. Among different processing methods, the hypolipidemic effects were in the order as baking=traditional processing=frying=microwaving>drying in shade. Among different baking times, the hypolipidemic effects ranked as 180 ℃>200 ℃=220 ℃. Among different baking times, the hypolipidemic effects ranked as 20 min=40 min>30 min. The hypolipidemic effects of processed product of I. hainanensis Merr with different amounts of active ingredients were different. [Conclusions] The processed products of I. hainanensis Merr all had hypolipidemic effects, but the effects were different. This study will provide a scientific basis for expanding the resources of I. hainanensis Merr.

Effect of SiC particles on microstructure and mechanical property of friction stir processed AA6061-T4

Friction stir processing of AA6061-T4 alloy with SiC particles was successfully carried out.SiC particles were uniformly dispersed into an AA6061-T4 matrix.Also SiC particles promoted the grain refinement of the AA6061-T4 matrix by FSP.The mean grain size of the stir zone (SZ) with the SiC particles was obviously smaller than that of the stir zone without the SiC particles.The microhardness of the SZ with the SiC particles reached about HV80 due to the grain refinement and the distribution of the SiC particles.

Study on Anti-gout Effect of Phellodendron amurense and Its Processed Products

[Objectives] This study was conducted to study the anti-gout effect of Phellodendron amurense and its different processed products.[Methods] Extracts of P. amurense and its different processed products were fed to rats respectively, to observe uric acid and creatinine in the serum and swelling index.[Results] Compared with the data of positive control, P. amurense and the processed products could significantly reduce the high uric acid and creatinine in the serum, and also could resist the swelling in rats.[Conclusions] P. amurense and its processed products showed different degrees of anti-gout effect, and the processing methods were found to have no remarkable impact on this effect.