A New Self-assembly Metal CMG Discriminator by Multi-exposure LiGA Like Process and Sacrificial Layer Process

The counter-meshing gears （CMG） discriminator is a mechanically coded lock, which is used to prevent the occurrence of High Consequence Events. This paper advanced a new kind of self-assembly metal CMG discriminator based on multi-exposure LiGA like process and sacrificial layer process. The new CMG discriminator has the following characters except low cost： 1） it has only discrimination teeth sections; 2） the thickness of each gear layer exceeds one hundred micrometers; 3） it is axially driven by a separate dectronic magnetic micromotor directly; 4） its CMG is made of metal and is batch fabricated in the assembled state; 5） it is prevented from rotating in the opposite direction by pawl/ratchet wheel mechanism; 6） it has simpler structure. This device has better strength and reliability in abnormal environment compared to the existing surface micro machining （SMM） discriminator.

FE simulation and process analysis on forming of aluminum alloy multi-layer cylinder parts with flow control forming

The aluminum alloy parts used in airbag of car were studied with flow control forming(FCF) method, which was a good way to low forming force and better mechanical properties. The key technology of FCF was the design of control chamber to divide metal flow. So, the design method of FCF was analyzed and two type of control chamber were put forward. According to divisional principle, calculation model of forming force and approximate formula were given. Then forming process of aluminum alloy multi-layer cylinder parts was simulated. The effect of friction factor, die radius and punch velocity on metal flow and forming force was obtained. Finally, the experiment was preformed under the direction of theory and finite element(FE) simulation results. And the qualified parts were manufactured. The simulation data and experimental results show that the forming sequence of inner wall and outer wall, and then the force step, can be controlled by adjusting the process parameters. And the FCF technology proposed has very important application value in precision forging.

Using a Modified Soil-Plant-Atmosphere Scheme(MSPAS)to Simulate the Interaction between Land Surface Processes and Atmospheric Boundary Layer in Semi-Arid Regions

This paper uses a Modified Soil-Plant-Atmosphere Scheme (MSPAS) to study the interaction between land surface and atmospheric boundary layer processes. The scheme is composed of two main parts: atmospheric boundary layer processes and land surface processes. Compared with SiB and BATS, which are famous for their detailed parameterizations of physical variables, this simplified model is more convenient and saves much more computation time. Though simple, the feasibility of the model is well proved in this paper. The numerical simulation results from MSPAS show good agreement with reality. The scheme is used to obtain reasonable simulations for diurnal variations of heat balance, potential temperature of boundary layer, and wind field, and spatial distributions of temperature, specific humidity, vertical velocity, turbulence kinetic energy, and turbulence exchange coefficient over desert and oasis. In addition, MSPAS is used to simulate the interaction between desert and oasis at night, and again it obtains reasonable results. This indicates that MSPAS can be used to study the interaction between land surface processes and the atmospheric boundary layer over various underlying surfaces and can be extended for regional climate and numerical weather prediction study.

Fabrication of ceramic layer on an Al-Si alloy by MAO process

The MAO (Micro-Arc Oxidation) process is applied to a eutectic Al-Si alloy(Al-12.0 percent Si-l.0 percent Cu-0.9 percent Mg (mass fraction)). The oxide ceramic layer wasfabricated with about 220 mum thickness and 3000 Hv micro-hardness. By XRD (X-ray diffractometry)and DSC (differential scanning calorimetry) analyses, the oxide layer consists of amorphous Al_2O_3,which is distinct from the results reported by the other researchers. The SEM photographs of suchlayer show that the layer is fixed tightly on the substrate alloy. So this alloy can he used in thehigh temperature and friction environment alter it is treated with such process.

Process analysis of direct laser melting to fabricate layered hybrid beads

The successful fabrication of layered hybrid beads by DLM process is limited by dissimilar melting ranges of different powders.For the application of DLM process into manufacturing industries,target mechanical properties of final product must be achieved.Process analysis was performed for the DLM fabrication of layered hybrid beads by using stainless steel (SS 316L) and titanium powders.For the analysis of fabrication characteristics,single hybrid bead was formed using SS316L powder onto the base plate and then Ti powder was melted onto the previous melted layer.In addition,multi-layer hybrid beads were fabricated for the analysis of the layering effects between them.From these studies,the effects of the processing parameters,such as laser power,scan rate and scan line spacing on surface morphology were characterized and optimum processing conditions for the DLM fabrication of layered hybrid beads were developed.

Numerical Study on Dry Deposition Processes in Canopy Layer

A coupling model between the canopy layer(CL) and atmospheric boundary layer (ABL) for the study of dry deposition velocity is developed. The model consists of six parts: chemical species conservation equation including absorptive factor; the species uptake action including detailed vertical variation of absorptive element in CL; momentum exchange in CL which is represented by a first-order closure momentum equation with an additional larger-scale diffusive term; momentum exchange in ABL which is described by a complete set of the ABL turbulent statistic parameters; absorptivity (or solubility or reflection) at the surface including effects of the physical and chemical characters of the species, land type, seasonal and diurnal variations of the meteorological variables; and deposition velocity derived by distributions of the species with height in CL. Variational rules of the concentration and deposition velocity with both height and time are simulated with the model for both corn and forest canopies. Results predicted with the bulk deposition velocity derived in the paper consist well with experimental data.

Freeze-thaw processes of active-layer soils in the Nanweng'he River National Natural Reserve in the Da Xing'anling Mountains,northern Northeast China

The active-layer soils overlying the permafrost are the most thermodynamically active zone of rock or soil and play important roles in the earth-atmosphere energy system. The processes of thawing and freezing and their associated complex hydrothermal coupling can significantly affect variation in mean annual temperatures and the formation of ground ice in permafrost regions. Using soil-temperature and-moisture data obtained from the active layer between September 2011 and October 2014 in the permafrost region of the Nanweng'he River in the Da Xing'anling Mountains, the freeze-thaw characteristics of the permafrost were studied. Based on analysis of ground-temperature variation and hydrothermal transport characteristics, the thawing and freezing processes of the active layer were divided into three stages:(1) autumn-winter freezing,(2) winter freeze-up, and(3) spring-summer thawing. Variations in the soil temperature and moisture were analyzed during each stage of the freeze-thaw process, and the effects of the soil moisture and ground vegetation on the freeze-thaw are discussed in this paper. The study's results show that thawing in the active layer was unidirectional, while the ground freezing was bidirectional(upward from the bottom of the active layer and downward from the ground surface).During the annual freeze-thaw cycle, the migration of soil moisture had different characteristics at different stages. In general, during a freezing-thawing cycle, the soil-water molecules migrate downward, i.e., soil moisture transports from the entire active layer to the upper limit of the permafrost. In the meantime, freeze-thaw in the active layer can be significantly affected by the soil-moisture content and vegetation.

Preparation of layered oxide Li(Co_(1/3)Ni_(1/3)Mn_(1/3))O_2 via the sol-gel process

To obtain homogenous layered oxide Li（Co1/3Ni1/3Mn1/3）O2 as a lithium insertion positive electrode material, the sol-gel process using citric acid as a chelating agent was applied. The material Li（Co1/3Ni1/3Mn1/3）O2 was synthesized at different calcination temperatures. XRD experiment indicated that the layered Li（Co1/3Ni1/3Mn1/3）O2 material could be synthesized at a lower temperature of 800℃, and the oxidation state of Co, Ni, and Mn in the cathode confirmed by XPS were ＋3, ＋2, and ＋4, respectively. SEM observations showed that the synthesized material could form homogenous particle morphology with the particle size of about 200 nm. In spite of different calcination temperatures, the charge-discharge curves of all the samples for the initial cycle were similar, and the cathode synthesized at 900℃ showed a small irreversible capacity loss of 11.24% and a high discharge capacity of 212.2 mAh·g^-1 in the voltage range of 2.9-4.6 V.

我国黄土高原地区地震动衰减关系研究的若干进展

地震动的衰减关系是指地震动随震级、距离和场地条件等变化的经验关系,近年来在我国亦被称为地震动预测方程,是估计地震动及其影响场的主要方法之一,在地震区划和重大工程场地地震安全性评价中被广泛应用。黄土是一种特殊土,在我国广泛分布。我国黄土高原地区地质构造复杂,新构造活动强烈,中强地震频发,地震动的衰减关系有其特殊性,总结我国黄土高原地区地震动衰减关系的研究成果对促进黄土高原地区抗震研究有重要意义。在简要介绍国内外地震动衰减关系研究的基础上,全面系统地总结我国学者在黄土高原地区的地震烈度衰减关系,基岩和土层场地地震动峰值加速度、峰值速度、峰值位移以及反应谱衰减关系方面的研究成果;评述和讨论在黄土覆盖地区地震动衰减研究领域存在的问题和今后的研究方向。文章的研究工作对从事黄土高原地区地震工程研究的科技人员有重要参考价值。

宠物用丹参咀嚼片制备工艺研究及质量标准建立

旨在确定宠物用丹参咀嚼片的制备工艺并建立其质量标准。本试验通过湿法制粒辅料种类、制粒工艺、压片工艺进行考察,确定其制备工艺,采用薄层色谱法、高效液相色谱法(HPLC)对宠物用丹参咀嚼片中丹参酮ⅡA、丹酚酸B分别开展定性和定量研究,建立其质量标准。结果:将丹参喷雾粉加辅料混合均匀,混合时间5 min,转速100 r/min,以10%淀粉浆为黏合剂制成颗粒,干燥温度40~50℃,0.3%硬脂酸镁作为润滑剂,压片速率10~35 r/min;薄层鉴别显示丹参酮ⅡA斑点清晰,分离度良好且专属性强;高效液相色谱显示丹酚酸B在8.0~256.0μg/mL范围内线性关系良好(R^(2)=0.999 9),系统适用性、专属性、精密度、稳定性、重复性、系统耐用性良好,加样回收率为95.0%~105.0%;对6批样品中丹酚酸B进行含量测定,设定含量限度为11.484 1 mg/g。综上,本试验确定的宠物用丹参咀嚼片制备工艺稳定可行,建立的薄层鉴别方法和高效液相色谱含量测定方法可用于宠物用丹参咀嚼片的质量控制。

基于混凝预处理的超滤净水工艺研究进展

膜污染是超滤工艺大规模运用的主要限制性因素,介绍超滤膜净水工艺膜污染的原理及其污染物。详述基于混凝预处理的三种超滤膜工艺:传统超滤工艺、短流程超滤工艺、一体式絮体-超滤工艺。以短流程超滤工艺为重点,阐述近年来以混凝预处理工艺来缓解超滤净水工艺膜污染的研究成果。总结了滤饼层结构对膜污染的影响,以及混凝预处理缓解超滤膜污染的作用原理,为膜法水处理工艺技术工程应用提供参考。

钛合金整体叶轮高效加工工艺研究

针对钛合金整体叶轮形状复杂、叶片长而薄以及钛合金难加工的特点,采用“3+2”定轴法开粗和分层法加工叶轮,以达到提高加工效率、加工质量以及降低加工成本的目的。

基于可能性理论的红外与可见光视频自适应分层融合算法

针对目前红外与可见光视频融合模型无法根据视频间差异特征动态调整融合策略,造成融合效果差甚至失效等问题,提出了一种基于可能性理论的红外与可见光视频的自适应分层融合算法。计算视频序列每帧中感兴趣区域的各类差异特征的幅值大小,得到每帧对应的主要差异特征;搭建分层融合框架,并确定各层变元,基于余弦相似性计算不同变元对各差异特征的融合有效度,利用可能性理论构造相应的融合有效度分布;逐层分析不同变元对各类差异特征的融合效果,选择出每层的最优变元;通过变元间的优化组合实现红外与可见光视频的自适应分层融合。实验结果表明:所提算法在保留红外典型目标和可见光结构细节等方面取得了显著的融合效果,并且在定量分析和定性评价上明显优于单一融合算法。

原子层制造的研究现状与科学挑战

原子层制造是指加工精度达到原子层量级的可控制造技术,包括原子层去除、添加、迁移等。针对信息、能源、航空航天等领域核心零部件超高性能构建的发展需求,通过原子层可控去除制造全频段原子级精度无损表面,并结合原子层增材制造原子级新结构,有望实现特殊功能的有效创成,保证超高性能的安全可靠。另外,后摩尔时代先进芯片的制造工艺将迈入亚纳米物理极限,原子层制造需求贯穿芯片制造工艺的全流程。本文阐述了原子层制造技术的发展需求与研究进展,围绕原子层抛光、原子层沉积/刻蚀、原子层损伤控制、原子层工艺与装备等领域,梳理了原子层制造的发展方向及研究目标,凝练了原子层制造领域未来的关键科学问题及面临的挑战,探讨了前沿研究方向和发展战略。

塔克拉玛干沙漠腹地晴天与沙尘暴天气大气边界层对比分析

根据2017、2019年7月塔克拉玛干沙漠腹地GPS探空和地面观测数据,利用位温廓线法等方法,对比分析了沙漠腹地夏季晴天和沙尘暴天气大气边界层结构变化特征。结果表明:晴天和沙尘暴天气大气边界层结构特征显著不同。晴天大气边界层各气象要素垂直分布较为均一,白天对流边界层深厚,高度接近5 km,夜间稳定边界层一般在500 m左右。沙尘暴天气边界层内位温和比湿垂直变化较小,风速较大,可达24.0 m/s,其白天对流边界层在1.5 km左右,夜间稳定边界层在1 km左右。晴天辐射强烈,地表升温迅速,湍流旺盛,是形成晴天深厚对流边界层的主要因素。大尺度天气系统冷平流的动力条件,以及云和沙尘减弱了到达地表的辐射强度是形成沙尘暴天气独特的大气边界层结构的主要因素。

基于多层残差网络的地震提频处理在薄储集层识别中的应用

基于多层残差网络的地震提频处理方法,通过智能化网络将测井高频信息与地震数据相结合,能有效提升纵向分辨率,保持横向连续可追踪,利于薄储集层识别。针对AMH地区常规处理的地震数据仅能识别厚度大于30 m的碳酸盐岩层,无法有效识别厚度较小的薄储集层的问题,提出基于多层残差网络的地震提频处理方法,以井旁地震振幅作为训练数据,测井相对波阻抗作为训练标签,利用深度学习网络多层残差网络开展训练,获取相对波阻抗曲线的预测模型;通过将地震数据作为输入,利用深度网络训练模型计算得到相对波阻抗数据体,进而得到提频后的地震数据体相对应的反射系数体。通过对靶区地质情况的分析认识,对宽频子波进行标定后提取合适的宽频子波,与反射系数体进行褶积,得到提频后的地震数据体;利用提频后的地震数据体开展储集层反演,反演结果纵向具有较高分辨率,与主要目的层能够较好匹配,横向可以进行识别和追踪,利用高分辨地震数据反演结果实现AMH地区的薄储集层识别。结果表明,通过基于多层残差网络的地震提频处理及相应的高分辨模型反演,在AMH地区能够识别厚度大于10 m的薄储集层,较好地解决由于地震分辨率低无法识别薄储集层的问题,有效提高了薄储集层预测的精度,对同类型薄储集层识别具有借鉴意义。

一种交通场景下人车检测的VHA-CenterNet无锚方法研究

在真实的交通场景中,车辆和行人检测器容易受到复杂背景的干扰,导致严重的误检和漏检。此外,由于交通场景图像中存在各种不同尺度的目标,大多数检测方法对小物体的检测性能较差,且难以适应交通物体的多样性。为了解决这些问题,提出了一种基于注意力和前景注意模块的无锚方法VHA-CenterNet。在主干网络中加入一个卷积块注意模块(CBAM),以提高对小目标的关注能力。在前景注意模块(FAM)中引入前景信息,以减少复杂背景的干扰。结果表明:在中等难度下,所提出的VHA⁃CenterNet方法在KITTI数据集上的mAP达71.92%,在RTX 2080 Ti上的推理速度为10.68 FPS,可以显著提高人车识别的准确率和速度。在所有情况下,交通场景的人车检测准确率都高于传统模型。

考虑同层后道工序的柔性设备网络综合调度算法

针对柔性设备网络综合调度算法,难以合理选择加工设备加工相关工序进而影响产品完工时间的问题,该文提出考虑同层后道工序的柔性设备网络综合调度算法(SP-FENIS)。首先,采用逆序层优先策略,将各工序分配至逆序层待调度工序集;然后,提出均值逆序紧后路径策略,确定了各逆序层待调度工序集中工序的调度顺序;最后,提出最早完工时间策略和设备空闲插入策略,当工序在柔性设备上最早完工时间相同时,考虑了在柔性设备上的加工时间和同层后道工序的加工设备,确定了目标工序的加工设备以及加工时间。实例表明,和已有算法相比,该算法能够缩短产品完工时间。

双层索引驱动的隧洞海量点云高效管理方法

针对隧洞表观性态监测,三维激光扫描获取的点云具有数据量巨大、非结构化以及狭长线状非均匀分布等特点,给隧洞点云数据处理极大的压力,也制约了隧洞工程点云监测应用的发展。为此,本文结合隧洞工程空间分布特点,提出一种基于双层索引结构的隧洞海量点云管理方法。该方法设计了一种基于Hough变换的隧洞水平中线粗提取方法,指导隧洞点云数据沿水平中线进行点云自动分段;而后利用“自下而上”的归并构建策略建立分段点云八叉树索引。在此基础上,利用非冗余的多层次细节(LOD)建模方法和内外存动态调度技术实现海量点云数据快速可视化。实验结果显示,本文方法有效提高了隧洞点云水平轴线提取效率,基于双层索引结构的隧洞点云管理在点云检索、海量点云数据可视化等方面表现出优异性能。

聚氨酯改性沥青制备工艺及混合料性能评价

为了推广聚氨酯改性沥青材料的应用,采用离析、针入度、软化点等试验方法对聚氨酯改性沥青的性能进行评价,确定剪切温度(140℃)、剪切时间(50 min)、剪切速率(3500 r/min)、合理掺量(13%)等制备工艺参数。采用车辙、小梁弯曲试验等混合料性能测试技术对SMA-10型薄层罩面聚氨酯改性沥青混合料的高低温路用性能进行了客观评价。结果表明,采用文中确定的制备工艺参数设计的聚氨酯薄层罩面沥青混合料路用性能优良,具备很好的推广应用前景。