Fresh Processing Technology in Polygonatum odoratum Production Area and Its Comparison with Traditional Processing

[Objectives]To compare the effects of traditional processing and fresh processing on the quality of Polygonatum odoratum decoction piece.[Methods]The effects of fresh processing and traditional processing on the quality of P.odoratum decoction piece were compared and analyzed with appearance characteristics,total ash content,extract content,total polysaccharides content,and total flavonoids content as the evaluation indexes.[Results]Fresh processing method in different production areas has different effects on P.odoratum decoction piece.P.odoratum was dried in oven of 50℃.When moisture content was 41.44%-59.67%,it was cut.After complete drying at 50℃,the moisture content of dried P.odoratum was 8.94%-9.60%,and ethanol-soluble extract content was 77.29%-78.20%,and water-soluble extract was 77.7%-78.14%.At this time,the appearance characteristics of section of P.odoratum decoction piece were better than that of traditional processing,which was yellowish white.The total polysaccharide content was higher than that of traditional processing,and the content of total flavonoids was statistically significant different from that of traditional processing.[Conclusions]The quality of P.odoratum decoction piece by fresh processing is better than that of the traditional processing,and it is feasible to use fresh processing.

High performance receiving and processing technology in satellite beam hopping communication

Beam-hopping technology has become one of the major research hotspots for satellite communication in order to enhance their communication capacity and flexibility.However,beam hopping causes the traditional continuous time-division multiplexing signal in the forward downlink to become a burst signal,satellite terminal receivers need to solve multiple key issues such as burst signal rapid synchronization and high-per-formance reception.Firstly,this paper analyzes the key issues of burst communication for traffic signals in beam hopping sys-tems,and then compares and studies typical carrier synchro-nization algorithms for burst signals.Secondly,combining the requirements of beam-hopping communication systems for effi-cient burst and low signal-to-noise ratio reception of downlink signals in forward links,a decoding assisted bidirectional vari-able parameter iterative carrier synchronization technique is pro-posed,which introduces the idea of iterative processing into car-rier synchronization.Aiming at the technical characteristics of communication signal carrier synchronization,a new technical approach of bidirectional variable parameter iteration is adopted,breaking through the traditional understanding that loop struc-tures cannot adapt to low signal-to-noise ratio burst demodula-tion.Finally,combining the DVB-S2X standard physical layer frame format used in high throughput satellite communication systems,the research and performance simulation are con-ducted.The results show that the new technology proposed in this paper can significantly shorten the carrier synchronization time of burst signals,achieve fast synchronization of low signal-to-noise ratio burst signals,and have the unique advantage of flexible and adjustable parameters.

Simulation of Fracture Process of Lightweight Aggregate Concrete Based on Digital Image Processing Technology

The mechanical properties and failure mechanism of lightweight aggregate concrete(LWAC)is a hot topic in the engineering field,and the relationship between its microstructure and macroscopic mechanical properties is also a frontier research topic in the academic field.In this study,the image processing technology is used to establish a micro-structure model of lightweight aggregate concrete.Through the information extraction and processing of the section image of actual light aggregate concrete specimens,the mesostructural model of light aggregate concrete with real aggregate characteristics is established.The numerical simulation of uniaxial tensile test,uniaxial compression test and three-point bending test of lightweight aggregate concrete are carried out using a new finite element method-the base force element method respectively.Firstly,the image processing technology is used to produce beam specimens,uniaxial compression specimens and uniaxial tensile specimens of light aggregate concrete,which can better simulate the aggregate shape and random distribution of real light aggregate concrete.Secondly,the three-point bending test is numerically simulated.Thirdly,the uniaxial compression specimen generated by image processing technology is numerically simulated.Fourth,the uniaxial tensile specimen generated by image processing technology is numerically simulated.The mechanical behavior and damage mode of the specimen during loading were analyzed.The results of numerical simulation are compared and analyzed with those of relevant experiments.The feasibility and correctness of the micromodel established in this study for analyzing the micromechanics of lightweight aggregate concrete materials are verified.Image processing technology has a broad application prospect in the field of concrete mesoscopic damage analysis.

A new horizon for neuroscience:terahertz biotechnology in brain research

Terahertz biotechnology has been increasingly applied in various biomedical fields and has especially shown great potential for application in brain sciences.In this article,we review the development of terahertz biotechnology and its applications in the field of neuropsychiatry.Available evidence indicates promising prospects for the use of terahertz spectroscopy and terahertz imaging techniques in the diagnosis of amyloid disease,cerebrovascular disease,glioma,psychiatric disease,traumatic brain injury,and myelin deficit.In vitro and animal experiments have also demonstrated the potential therapeutic value of terahertz technology in some neuropsychiatric diseases.Although the precise underlying mechanism of the interactions between terahertz electromagnetic waves and the biosystem is not yet fully understood,the research progress in this field shows great potential for biomedical noninvasive diagnostic and therapeutic applications.However,the biosafety of terahertz radiation requires further exploration regarding its two-sided efficacy in practical applications.This review demonstrates that terahertz biotechnology has the potential to be a promising method in the field of neuropsychiatry based on its unique advantages.

Processing Technology and Quality of Low-fluoride Brick tea

In order to promote the quality of brick tea and reduce its fluoride content, the fluoride contents in leaves of 25 tea varieties at the .stage of one bud and five leaves were determined by the method of fluodde-ion selective electrode method. The results showed that the fluodde contents in the 25 varieties were in the range of 181.92-345.06 mg/kg, end the fluoride content in ＇Zhongcha 302＇ was the lowest. Based on traditional production process of brick tea, 3 new low-fluoride brick tea production processes with ＇Zhongcha 302＇ as the raw material at the stage of one bud and five leaves were constructed. The fluoride content, physicochemical in- dex, sensory end main chemical contents in the brick tea samples were determined. The best processing process of Iow-fluodde brick tea was process 3, which included aldng, fixing, rolling, second fixing, second roiling, sun-drying, pile-fermentation, steaming, pile-fermentation, drying and shaping into brick by vapor treating. The re- sults showed that the fluoride content and physicochemical index of the brick tea sample of the third low-fluoride brick tea production process accorded with National Standard GB/T 9833.4-2013. The sensory evaluation of the brick tea sample was better than that of brick tea manufacture by the traditional process. The water extract, tea polyphenols, amino acids, caffeine and water-soluble sugar in the brick tea sample increased by 9.41%, 36.39%, 26.94%, 27.23% and 15.29%, respectively. Low-fluodds bdck tea could be produced by selecting low fluoride tea varieties, controlling the tondemess of fresh leaves, and optimizing the processing technique.

Processing Technology of Pomelo jelly with Health-care Function

[Objective] The aim was to research the processing technology of pomelo jelly with health-care function. [Method] With Citrus maxima （Burm.） Merr. cv. Guanxiyou as the raw materials, the optimal processing technology of pomelo jelly with health-care function was obtained by orthogonal test based on the results of single factor test. [Result] The optimal processing technology of pomelo jelly with healthAugust 16, 2016care function was as follows： 30% pomelo juice, 15% sugar, 1.0% mixed gel and 0.19% citric acid. Under these conditions, the pomelo jelly had relatively good sensory status, with certain nutritional value and health care function. [Conclusion] This research provides references for the deep processing of pomelo.

Integrated Application Technology of Feces Processing in Duck Farm at Scale Based on Configuration Technology

[Objective] The aim was to explore technology on processing feces in duck farms at scale, providing guiding method for effective control of environmental issues in breeding farms. [Methed] Bio-safety disposal and recovering processing of excrements in a duck farm were researched based on technology of configuration, detection, digestion, EM and poultry breeding. [Result] The integrated application technology is quite simple and the cost is not high. During breeding period, excellent organic fertilizers and high-protein forages could be obtained without any antibiotics. Furthermore, secondary wastes and pollution would not occur. In addition, ammonia was lower in excrements processed with earthworm and air pollution was reduced; the produced humus provided organic fertilizers and improved barren soils. [Conclusion] The research provides references of multi-technology integration for related industries.

基于Arduino与Processing的心率检测计设计研究

随着社会经济的高速发展,人们的物质生活也有了极大的提高,但同时也伴随着各种疾病的到来,身体健康已经成为人们普遍关注的焦点,因此,心率检测仪、血压计、血糖仪等各种家用医疗监测仪器已经逐渐融入日常生活。心脏病是人们难以预防的突发致命疾病之一,本文介绍的是一款基于Arduino【是基于易用硬件和软件的原型开源平台,包由可编程的电路板(简称微控制器),以及集成开发环境(称为Arduino IDE)的现成软件组成】Processing(开源编程语言,包括编辑器、编译器、展示器)的简易心率检测计系统,其功能实用、操作简单,可以测量心率,当超出正常心率范围时及时预警,是一款便携的实时心率测试仪。

Raman spectroscopy as process analytical tool in downstream processing of biotechnology

Downstream processing or product recovery plays a vital role in the development of bioprocesses.To improve the bioprocess efficiency,some unconventional methods are much required.The continuous manufacturing in downstream processing makes the Process Analytical Technologies(PATs)as an important tool.Monitoring and controlling bioprocess are an essential factor for the principles of PAT and quality by design.Spectroscopic methods can apply to monitor multiple analytes in real-time with less sample processing with significant advancements.Raman spectroscopy is an extensively used technique as an analytical and research tool owing to its modest process form,non-destructive,non-invasive optical molecular spectroscopic imaging with computer-based analysis.Generally,its application is essential for the analysis and characterization of biological samples,and it is easy to operate with minimal sample.The innovation on various types of enhanced Raman spectroscopy was designed to enhance the Raman analytical technique.Raman spectroscopy could couple with chemometrics to provide reliable alternative analysis method of downstream process analysis.Thus,this review aims to provide useful insight on the application of Raman spectroscopy for PAT in downstream processing of biotechnology and Raman data analysis in biological fields.

A comprehensive review of bioactive compounds and processing technology of sesame seed

Sesame seeds are promulgated as traditional high-quality edible oil crops,rich in lipid(40–65%),protein(19–35%),and bioactive compounds.The review starts with bioactive components(fatty acid,tocopherol,phytosterol,sesamin,sesamolin,and sesamol)of sesame seeds.It considers processing techniques for extracting oil(aqueous extraction and pressing)from seeds.Novel technologies,such as enzyme-assisted aqueous,supercritical CO_(2),and microwave-assisted solvent extraction,are also discussed.The methods of utilization of sesame seed cake are also analyzed.In the future,the processing technology of sesame seed will be further developed in the direction of improving comprehensive utilization rate to meet new consumption demand.

Effect of Hot Processing Technology on Mechanical Properties and Structure of Interface of Ti/Steel Composite Sheet

研究了热加工工艺对钛-钢复合板界面力学性能和显微组织的影响。测试了在A，B，C，D4种温度下热轧复合板界面的力学性能，用金相显微镜及扫描电镜观察了界面显微组织并分析了界面的成分。结果表明，在A，B2种温度下轧制的钛-钢复合板界面机械性能良好，延伸率高，其剪切强度不但可保持坯料原有的水平，甚至还略有增加。在C，D2种温度下轧制的钛-钢复合板界面机械性能相对较低，延伸率较高，但剪切强度要比爆炸复合坯料低，尤其是D加热温度，轧制后界面剪切强度急剧下降。热轧的终轧温度也是影响钛-钢复合板界面结合性能的重要因素。在低于相转变温度的合适温区热轧，且终轧温度合适，获得的钛-钢复合板结合界面无爆炸波纹，没有污染，生产的脆性化合物极细小，组织类同于钛材完全退火的等轴组织。

Investigation of the processing technology and mechanism of Kansui radix by licorice based on response surface methodology and integrative pharmacology

Background:The herbs should be processed by different methods before use,and the efficacy and toxicity of Chinese herbal medicines may change,which may enhance efficacy and reduce toxicity after processing.Gansui(Kansui radix)is a common clinical herbal medicine,and there are considerable changes in its toxicity and efficacy after processing.Gaocao(Glycyrrhizae radix et rhizome)has a detoxifying effect.Methods:Using the contents of euphorbiadienol and the alcohol-soluble extract of Glycyrrhizae radix-processed Kansui radix as evaluation indexes,response surface methodology was used to optimize the processing technology of Kansui radix by exploring the effects of Glycyrrhizae radix et rhizoma-addition amount,frying temperature,and frying time on the processing technology of Kansui radix.Meanwhile,response surface software was used to analyze experimental data to determine the processing parameters of Kansui radix by Glycyrrhizae radix et rhizoma.Integrative Pharmacology-based Research Platform of Traditional Chinese Medicine is used to analysis the potential ingredients of Kansui radix and verify the potential ingredients by western blotting.Results:The technology of Glycyrrhizae radix et rhizoma-processed Kansui radix was optimized for the Glycyrrhizae radix et rhizoma-addition amount of 27%,frying temperature of 180℃,and frying time of 11 min.The network pharmacology analysis revealed that Kansui radix could cause kidney,liver,and heart injury by the PI3K/AKT signaling pathway.Kansui radix at high or low dose could decrease the ratio of p-AKT/AKT while Glycyrrhizae radix et rhizoma-processed Kansui could increase it.Conclusion:The model established by response surface methodology is relatively accurate and can predict the contents of euphorbiadienol and alcohol extract of processed Kansui radix.The toxic effects and its mechanism of action of Kansui radix and processed Kansui radix on kidney,liver,and heart,from the perspective of systems biology,have provided scientific evidence to its clinical application.

Review on the processing characteristics of cereals and oilseeds and their processing suitability evaluation technology

Cereals and oilseeds are the foundation of human survival which have attracted much attention due to their nutritional and functional properties for maintaining the healthy life. There are abundant varieties of cereals and oilseeds, however, for a long time, their process suitabilities are still unknown, resulting in the lack of precision processing. This paper summarized the characteristics of cereals and oilseeds, including sensory, physicochemical and processing qualities, their characteristic fingerprinting and products qualities. Furthermore, the quality fast detection method was also analyzed. It also explored the role of mathematical model and the standard evaluation index to determine the process suitability and discussed the opportunity for advanced model capability. We also prospected on scientific problems for expanding the predictive capabilities for processing suitabilities of these abundant varieties, focusing on the better results and advancements towards the processing of cereals and oilseeds products and improvement of their quality.

Image Processing Technology of Flaws within Infrared Transmitting Glasses

We investigated image processing algorithms of the original infrared glass flaw image. Using the Laplacian edge enhancement following LSD （Line Segment Detector） algorithm, we can get a good flaw image very consistent with the original one. This study is very helpful to further enhance the infrared glass flaw inspection technique.

Recognition of Greenhouse Cucumber Disease Based on Image Processing Technology

This paper mainly studies the disease of cucumber downy mildew, powdery mildew and anthracnose leaf image processing and recognition technologies. Application of median filtering method of filtering noise, leaf spot disease of cucumber leaf color range segmentation part extract color feature parameters of the lesion site, characteristic parameters of the shape;extraction texture parameters by using gray level co-occurrence matrix. Based on the shortest distance methods to identify diseases of images. The experimental result showed that the current method on disease recognition accuracy rates more than 96%.

Alternative Processing Technology for Converting Vegetable Oils and Animal Fats to Clean Fuels and Light Olefins

Since the production cost of biodiesel is now the main hurdle limiting their applicability in some areas, catalytic cracking reactions represent an alternative route to utilization of vegetable oils and animal fats. Hence, catalytic transformation of oils and fats was carried out in a laboratory-scale two-stage riser fluid catalytic cracking （TSRFCC） unit in this work. The results show that oils and fats can be used as FCC feed singly or co-feeding with vacuum gas oil （VGO）, which can give high yield （by mass）of liquefied petroleum gas （LPG）, C2-C4 oletms, tor example 45% LPG, 47% C2-C4 olefins, and 77.6% total liquid yield produced with palm oil cracking. Co-feeding with VGO gives a high yield of LPG （39.1%） and propylene （18.1%）. And oxygen element content is very low （about 0.5%） in liquid products, hence, oxygen is removed in the form of H2O, CO and CO2. At the same time, high concentration of aromatics （C7-C9 aromatics predominantly） in the gasoline fraction is obtained after TSRFCC reaction of palm oil, as a result of large amount of hydrogen-transfer, cyclization and aromatization reactions, Additionally, most of properties of produced gasoline and diesel oil fuel meet the requirements of national standards, containing little sulfur. So TSRFCC technology is thought to be an alternative processing technology leading to production of clean fuels and light olefins.

Composition,Processing Technology and Property of Ceramic Die Materials Containing Rare Earth Additives

Development and application of new ceramic die materials is one of the important topics in the field of die research. The composition, processing technology, mechanical property and engineering performance of the ceramic materials such as cermet, ZTA, TZP, TZP/Al2O3, TZP/TiC/Al2O3, PSZ and Sialon, etc., with rare earth yttrium, lanthanum and cerium, and so on working as additives, were investigated and analyzed in the present study. Problems existed in the research and application of rare earth ceramic die materials were discussed. Rare earth additives can effectively improve the mechanical property and engineering performance of ceramic die materials. Thus, it will have further perspectives of wider application. More attention should be paid in the future to the toughening and strengthening of the ceramic die materials, the adding forms and kinds of rare earth elements and acting mechanisms of rare earth additives in ceramic die materials.

An optimized industry processing technology of peanut tofu and the novel prediction model for suitable peanut varieties

Peanut protein is easily digested and absorbed by the human body,and peanut tofu does not contain flatulence factors and beany flour.However,at present,there is no industrial preparation process of peanut tofu,whereas the quality of tofu prepared by different peanut varieties is quite different.This study established an industrial feasible production process of peanut tofu and optimized the key process that regulates its quality.Compared with the existing method,the production time is reduced by 53.80%,therefore the daily production output is increased by 183.33%.The chemical properties of 26 peanut varieties and the quality characteristics of tofu prepared from these 26 varieties were determined.The peanut varieties were classified based on the quality characteristics of tofu using the hierarchical cluster analysis(HCA)method,out of which 7 varieties were screened out which were suitable for preparing peanut tofu.An evaluation standard was founded based on peanut tofu qualities.Six chemical trait indexes were correlated with peanut tofu qualities(P<0.05).A logistic regressive model was developed to predict suitable peanut varieties and this prediction model was verified.This study may help broaden the peanut protein utilization,and provide guidance for breeding experts to select certain varieties for product specific cultivation of peanut.

Effects of processing technology on essential oil and pharmacological action of frankincense

Background:According to the traditional Chinese medicine theory,the common processing methods for Ruxiang(frankincense)include stir-frying processing and vinegar processing.Methods:With network pharmacology and thermal analysis methods,we selected and identified the main and irritating ingredients,established the pyrolysis characteristic parameters for identifying frankincense quality,quantified the starting and optimum temperature limits for processing frankincense,and analyzed the influences of processing adjuvants(vinegar)on combustion pyrolysis characteristics of frankincense.By applying Fourier transformation infrared spectrometry,high performance liquid chromatography,gas chromatography and UV-visible spectrometry,we evaluated the processing technology developed in our study of frankincense and its processed products.Results:Based on network pharmacology,we can find that the classical compounds of essential oil are the main pharmacodynamics components of frankincense possessing the anti-inflammatory,analgesia,anti-tumor,anti-ulcer and ant-inflammatory bowel disease effects.The pyrolysis combustion rate peaks of frankincense at 285.27±7.05℃and 476.99±13.46℃were the characteristic peaks used to identify frankincense quality.The specific temperature of slow-fire processing,including the vinegar processing and stir-frying processing,was 148.72±5.09℃.Heating for 5.67±0.98 min after reaching processing temperature was needed for processing frankincense with vinegar.The kinetics analysis showed that both frankincense and its vinegar mixture exhibited good linear relationships.The feasibility and practicability for our processing technology were verified through the determination of medicinal compounds by Fourier transformation infrared spectrometry,high performance liquid chromatography,gas chromatography and UV.Conclusion:Frankincense essential oils were the main active components of frankincense,which also can be taken as the internal chemical control indexes to judge the quality control and to optimize the processing technology of frankincense.The pyrolysis combustion rate peaks of frankincense at 285.27±7.05℃and 476.99±13.46℃were the characteristic peaks that can be used to identify frankincense quality.The optimum processing conditions of vinegar-processed frankincense with were as follows:with vinegar,20%;heating temperature,148.72±5.09℃;and heating time,5.67±0.98 min.Under these conditions,frankincense essential oil could cause a moderate effect on combustion pyrolysis characteristics to exert its corresponding pharmacological effects.

《China Petroleum Processing and Petrochemical Technology》征订启事

China Petroleum Processing and Petrochemical Technology(中国炼油与石油化工)(ISSN 1008-6234;CN 11-4012/TE)创刊于1999年,季刊,是中国出版的炼油和石油化工方面的第一份英文期刊,由石油化工科学研究院主办,属综合(指导)类科技期刊,报道内容以中国国内信息为主,兼顾世界各地的重要科技动态。