Leaching kinetics of acid-soluble Cr(Ⅵ) from chromite ore processing residue with hydrofluoric acid

Leaching kinetics of acid-soluble Cr（VI） in chromite ore processing residue （COPR） using hydrofluoric （HF） acid solution as a leaching agent was investigated for potential remediation of COPR with industrial waste water containing HF. The results show that HF can effectively destabilize the Cr（VI）-bearing minerals, resulting in the mobilization of Cr（VI） from COPR into the leachate. Particle size significantly influences the leaching of acid-soluble Cr（VI） from COPR, followed by leaching time, whereas the effects of HF concentration and leaching temperature are slight and the influence of stirring rate is negligible. The leaching process of acid-soluble Cr（VI） from COPR is controlled by the diffusion through the product layer. The apparent activation energy is 8.696 kJ/mol and the reaction orders with respect to HF concentration and particle size is 0.493 8 and -2.013 3, respectively.

Distribution Characteristics of Minerals and Elements in Chromite Ore Processing Residue

In this paper, environmental scanning electron microscopy （ESEM） is applied to characterizing the mineral and element distribution of chromite ore processing residue （COPR）. The test results show that Cr-bearing brownmillerite occurs in the rim of COPR particle, while hydroandradite with Cr （Ⅵ） in its structure presents inside the COPR particle. Periclase and calcite occur in the interstitial area. Element analyses show that Ca, Fe and Al are distributed throughout the COPR particle, and Mg exists mostly in the interstitial area or on the particle surface. A lower content of Cr is evenly distributed in the COPR particle, while slightly higher concentration of Cr occurs inside the particle. It is suggested that it will take a relatively longer time for Cr to migrate out of COPR, especially fbr hexavalent chromium, so the leaching time and the particle size may be two important factors to affect the release of Cr （Ⅵ）.

Speciation and spatial distribution of Cr in chromite ore processing residue site,Yunnan,China

Remediation of COPR sites requires the key information including chromium oxidation, speciation and spatial distribution. Samples were gathered from a COPR site in Luliang County in Qujing, Yunnan Province of China. The total Cr, Cr(VI) and chromium species were investigated. Results indicated the concentration of total Cr was between 110.5 and 21,774 mg/kg, and the concentration of Cr(VI) was between 0.1 and 1075 mg/kg. The map of total-Cr and ratio of Cr(VI)/total-Cr(%) showed that the maximum of total-Cr and Cr(VI) appeared in the layers near the surface. In the horizontal direction, the pollution was more serious in the middle and southeast part than that in the west. Additionally, acid extractable chromium increased in the layers at depth from-0.3 to-2.0 m, and it decreased in the deeper layers. There was a trend that the movable Cr(VI) migrated to the deeper layers, and then it turned into Cr(III). Water played an important role for the Cr distribution. Cr(VI) in COPR released to the soil solution after rainfall, and then gravity led the solution down to the deeper layers. After repeated rainfall and leaching,Cr(VI) moved to the deeper soil layers. Due to capillarity and evaporation, Cr(VI) migrated and was enriched at thesurface layer. Therefore, measures on controlling water movement should be taken in the remediation of the COPR site.

Extraction of Cr(Ⅵ) from chromite ore processing residue via hydrothermal-assisted phase transformation

The effective extracting Cr(Ⅵ) from chromite ore processing residue(COPR) is the key to achieve COPR detoxification and recovery.We developed an effective method to extract Cr(Ⅵ) from COPR via controlling the phase transformation of Cr(Ⅵ)-containing minerals.Characteristic analysis showed that Cr(Ⅵ) was mainly incorporated in the hydrocalumite(NaCa4Al2O6(SO4/CrO4)1.5-15H2O) in COPR,which was a layered-double hydroxide(LDH) with multilayer structure.In the hydrothermal treatment experiments,the Na2CO3 solution showed significant extraction effect of Cr(Ⅵ) and detoxification effect of COPR.After treatment,95% of Cr(Ⅵ) was removed and the Cr(Ⅵ) concentration in the leachate was decreased to 1.6 mg/L by the toxicity characteristic leaching procedure(TCLP),within the regulatory limit disposal standard(HJ/T 301-2007,3 mg/L).Further study revealed that,during the treatment,hydrocalumite transformed into calcite(CaCO3) under the effect of mineralizer,therefore,the layered structure collapsed and the incorporated Cr(Ⅵ) was released to the supernatant.Meanwhile,the Cr(Ⅵ)desorbed from calcite with the calcite particles grew into large size with smooth surface.Stir-flow experiment revealed that the amount of chromium released from CORP to the environment was significantly reduced after treatment,and it is safer for landfill disposal.This work will provide an instructive guidance for the detoxification and recovery of COPR.

Chromium steel from chromite ore processing residue——A valuable construction material from a waste

As species we humans generate excessive amounts of waste and hence for sustainability we should explore innovative ways to recover them.The primary objective of this study is to demonstrate an efficient and optimum way to recover chromium and iron from chromite ore processing residues(COPR)for the production of chrome steel and stainless steel.In Hudson County,New Jersey,there are more than two million tons of leftover COPR.Part of COPR was used as fill materials for construction sites,which spread the problem to a larger area.With high solubility along with their toxicity leached chromate from COPR is threatening the environment as well as human health.In this research,COPR was thermally treated to recover iron with chromium by applying techniques used in steel manufacturing.An extensive experimental program was performed using a Thermo-Gravimetric Analyzer(TGA)and bench scale tests to thermally treat the processed chromium contaminated soils with carbon and sand at varying temperatures and under reducing environment.The optimum chemical composition of COPR and additives to be used in the melts were evaluated based upon the thermodynamic properties of the mixture to ensure good phase separation,least amounts of iron and chromium oxides in the slag and minimum variability of final product(steel or iron with chromium).The impact of other oxides on the steel making process was evaluated to minimize the adverse impact on the process.The research demonstrated the feasibility of recovering a valuable construction material(chrome steel)from a waste(COPR).

Ceramic bodies with rock processing residues(RPR)for constructing materials

The rock processing residue(RPR)waste is used for part of the ceramic products.The present work deals with the unused waste useful for making ceramic materials and save the area and the dump space.The residues are initially analyzed with the chemical and spectroscopic method.The residues are mixed with clay of proportions 0-50 wt%in steps of 10%.The prepared specimens are characterized with Fourier transform infrared(FTIR),X ray fluorescence(XRF)for chemical,mechanical,and physiochemical properties,such as density,compressive strength,weight loss on ignition and porous nature,which are measured through the selective instrument.The thermal stability of the product was tested by firing at 950℃.This says the rock residues are useful for making ceramic and related materials with high concentrations.

Stress Wave Propagation Analysis on Vortex-Induced Vibration of Marine Risers

To analyze the stress wave propagation associated with the vortex-induced vibration（VIV） of a marine riser, this paper employed a multi-signal complex exponential method. This method is an extension of the classical Prony＇s method which decomposes a complicated signal into a number of complex exponential components. Because the proposed method processes multiple signals simultaneously, it can estimate the “global” dominating frequencies（poles） shared by those signals.The complex amplitude（residues） corresponding to the estimated frequencies for those signals is also obtained in the process. As the signals were collected at different locations along the axial direction of a marine riser, the phenomena of the stress wave propagation could be analyzed through the obtained residues of those signals. The Norwegian Deepwater Program（NDP） high mode test data were utilized in the numerical studies, including data sets in both the in-line（IL） and cross-flow（CF） directions. It was found that the most dominant component in the IL direction has its stress wave propagation along the riser being dominated by a standing wave, while that in the CF direction dominated by a traveling wave.

Testing conditional independence with data missing at random

It is known that conditional independence is a quite basic assumption in many fields of statistics. How to test its validity is of great importance and has been extensively studied by the literature. Nevertheless, all of the existing methods focus on the case that data are fully observed, but none of them seems having taken into account of the scenario when missing data are present. Motivated by this, this paper develops two testing statistics to handle such a situation relying on the idea of inverse probability weighted and augmented inverse probability weighted techniques. The asymptotic distributions of the proposed statistics are also derived under the null hypothesis. The simulation studies indicate that both testing statistics perform well in terms of size and power.

MULTIVARIATE SURVIVAL DISTRIBUTIONS OF AGE AND RESIDUAL LIFETIME PROCESSES IN NONHOMOGENEOUS POISSON PROCESS

Let {V(t),t≤0} be the nonhomogeneous Poisson process with cumulative intensituy parameter A(t). |δ,t≥0 the, age process, and y, t≥0} the residual lifetime process. In the present-paper the expressions of n-dimensional survival distribution functions of the processes {δ and γ, and their Lebesgue decompositions are derived.

Curvature and Residual Stress Analysis in Rotational Leveling of Bars

Leveling process plays an important role in delivering the desired material properties and product standards.An analytical method for the rotational leveling process of bars was presented.First,each cross section of the bar in the leveling area was discretized with the roller gap-curvature relations established in both planes XYand XZ.Second,a numerical procedure with two steps was developed to simulate both pressing and leveling processes.This approach can be easily implemented to produce simulation results of the curvature and trajectory distributions during the leveling process,as well as the bending and residual stresses.It is found that curvature and trajectory distributions follow a sine-shape due to the characteristic of rotational movement,which also results in a helical pattern of residual stress after leveling.Based on the results obtained,it is also observed that the rotational movement is beneficial for adding the number of bending cycle.This is the reason why there are only a few pairs of rollers on the bar leveler.

Residual stress characteristics of butt-welded flange by finite element analysis

Finite element simulation is utilized in an aluminum alloy 2014 butt-welded flange under AC Tungsten Inert Gas （AC-TIG） welding condition. The simulated results are in good agreement with the residual stress for the plate test using the actual welding parameters. Furthermore, characteristics of residual stress could be investigated in detail in several aspects, such as the welding structures, the welding sequences, the time intervals, preheating, and repair weld. The intermittent welding may be more convenient and advantageous for the practical applications to reduce the stress, and the local repair welding may cause more stress within the repairing region obviously.

Effect of Cold Rolling Parameters on the Longitudinal Residual Stress Distribution of GH4169 Alloy Sheet

For plastic deformed parts, the dimensional accuracy is significantly affected by residual stresses and so does the performance in service. Therefore, the rolling process of GH4169 alloy sheet at room temperature was investigated by finite element method. The effects of rolling reduction, friction coefficient, rolling velocity and initial stress on the longitudinal residual stress distribution over the thickness of GH4169 alloy sheet were analyzed. The results show that the values of longitudinal residual stress can be slightly reduced by increasing the rolling reduction and velocity. The longitudinal residual stress over the thickness distributes as ‘‘V＇＇ type or weak ‘‘W＇＇ type. The initial stress mainly has an effect on the longitudinal stress in the backward slip area. But the friction coefficient has remarkable influence on longitudinal residual stress. With the friction coefficient increasing from 0.1 to 0.5, the value of longitudinal residual stress on the sheet surface is reduced by 282 MPa. Simultaneously, the tensile stress turns into compressive stress with a strong‘‘W＇＇ type distribution.