Development of Sustainable Solutions for Zebra Mussel Control Through Chemical Product Engineering

The zebra mussel is an important aquatic pest that causes great damage to freshwater-dependent industries, due to biofouling. The main goal of the project discussed here is to develop improved solutions to control this species. Three approaches have been explored in an attempt to design innovative application strategies for existing biocides： （i） encapsulation of toxins; （ii） combination of toxins; （iii） investigation of the seasonal variation of the species＇ tolerance to toxins. In this paper, the principles behind these approaches and the major results on each topic are presented. The benefits of adopting a chemical product engineering approach in conducting this project are also discussed.

Intercalation Assembly and Chemical Product Engineering of Layered Intercalated Functional Materials Based on Efficient Utilization of Magnesium Resources in Salt Lakes

1 Introduction Magnesium salts are very important by-product of salt lake industry in West China.Nearly 200 million cubic meters of waste brine are released to the environment

Progress and prospects of oil and gas production engineering technology in China

This paper summarizes the important progress in the field of oil and gas production engineering during the"Thirteenth Five-Year Plan"period of China,analyzes the challenges faced by the current oil and gas production engineering in terms of technological adaptability,digital construction,energy-saving and emission reduction,and points out the future development direction.During the"Thirteenth Five-Year Plan"period,series of important progresses have been made in five major technologies,including separated-layer injection,artificial lift,reservoir stimulation,gas well de-watering,and workover,which provide key technical support for continuous potential tapping of mature oilfields and profitable production of new oilfields.Under the current complex international political and economic situation,oil and gas production engineering is facing severe challenges in three aspects:technical difficulty increases in oil and gas production,insignificant improvements in digital transformation,and lack of core technical support for energy-saving and emission reduction.This paper establishes three major strategic directions and implementation paths,including oil stabilization and gas enhancement,digital transformation,and green and low-carbon development.Five key research areas are listed including fine separated-layer injection technology,high efficiency artificial lift technology,fine reservoir stimulation technology,long term gas well de-watering technology and intelligent workover technology,so as to provide engineering technical support for the transformation,upgrading and high-quality development of China’s oil and gas industry.

Development of Simulation Tool Orienting Production Engineering

A simulation tool named BITSIM orienting production engineering is developed in order to improve enterprise＇s productivity and making up the scarcity of computer application. The architecture of BITSIM is presented first. Hierarchical technique, control strategy based on multi-agent and simulation output analysis are depicted in detail then. In the end, an application example is taken out to prove that this system could be used to analyzing different hypothetical situation and configuring the auxiliary manufacturing system before production.

Development and Application of WebGIS Middleware in Oil Production Engineering

WebGIS is the result of combining the technology of Internet with that of Geographic Information Systems (GIS). This paper aims at some problems in the development of GIS, such as the system of development is instable, and presents the method of adopting component technology to accomplish WebGIS middleware which has been successfully applied to the Oil Production Engineering information visible system. It showed in practice that the WebGIS middleware can be casily embedded in the web pages to accomplish GIS application system in a network environment. On the one hand, its application can reduce complexity of system and speed up the pace of development. On the other hand, it is certain to reduce the development costs and improve the maintainability. Key words WebGIS - middleware - oil production engineering CLC number TP 31 Biography: LIU Quan (1969-), male, Ph. D. candidate, research direction: include automated resoning, WebGIS.

A paradigm-based evolution of chemical engineering

A short presentation of chemical engineering evolution,as guided by its paradigms,is exposed.The first paradigm–unit operations–has emerged as a necessity of systematization due to the explosion of chemical industrial applications at the end of 19th century.The birth in the late 1950s of the second paradigm–transport phenomena–was the consequence of the need for a deep,scienti fic knowledge of the phenomena that explain what happens inside of unit operations.In the second part of 20th century,the importance of chemical product properties and qualities has become essentially in the market fights.Accordingly,it was required with additional and even new fundamental approaches,and product engineering was recognized as the third paradigm.Nowadays chemical industry,as a huge materials and energy consumer,and with a strong ecological impact,couldn't remain outside of sustainability requirements.The basics of the fourth paradigm–sustainable chemical engineering–are now formulated.

Alkyl-tetralin base oils synthesized from coal-based chemicals and evaluation of their lubricating properties

Naphthenic base oil is an important lubricating base oil and very scarce in the global petroleum resources.Herein,a series of alkylated tetralin fluids similar to naphthenic base oils were produced by the alkylation of tetralin and a-olefins(n-hexene,n-octene,n-decene)with ionic liquid Et_3NHCl/AlCl_(3)as the catalyst,where the applied raw materials are totally derived from the coal chemical industry.The product composition could be controlled by adjusting the feeding ratio of tetralin and olefin.The synthetic fluids were evaluated as lubricating base oils to reveal the structure-property correlations.Their principal physicochemical and tribological properties depend on the chain-length of a-olefins and the number of alkyl groups onto the aromatic rings.Bis-(octyl-or decyl-)alkyl tetralin exhibited good properties in terms of viscosity,thermo-oxidation stability and pour point,as well as friction-reducing and anti-wear performance,showing great potential for producing naphthenic base synthetic oils from coal-based chemicals.

A mathematical model of symmetry based on mathematical definition

Tolerance is imperative for seamless integration of CAD/CAM(Computer Aided Disign/Computer Aided Manufacture) which is just a text attribute and has no semantics in present CAD systems. There are many tolerance types, the relations between which are very complicated. In addition, the different principles of tolerance make study of tolerance difficult; and there may be various meanings or interpretation for the same type of tolerance because of the literal definition. In this work, latest unambiguous mathematical definition was applied to study, explain and clarify: (1) the formation and representation of tolerance zone, and (2) the formation and representation of variational elements; after which, the mathematical models of symmetry of different tolerance principles and different interpretations were derived. An example is given to illustrate the application of these models in tolerance analysis.

Computation Method for the Real-Time Control Problems in Differential-Algebraic Systems

In this paper, a real-time computation method for the control problems in differential-algebraic systems is presented. The errors of the method are estimated, and the relation between the sampling stepsize and the controlled errors is analyzed. The stability analysis is done for a model problem, and the stability region is ploted which gives the range of the sampling stepsizes with which the stability of control process is guaranteed.

Persistent Integration and Innovation Management Mode and Its Applications in Petroleum Production Engineering

This paper proposes a new management mode named the persistent integration and innovation management mode to satisfy the requirements by the fast development at oilfields. Taking engineering philosophy as the guidance and technical innovations in petroleum production engineering as the breaking point, the management mode combines long term production practice at oilfields with modern management methods. The management mode integrates intellectuals, techniques, capital, and information and so on to accomplish global optimization of resource configuration. Sets of new techniques, new methods, new technologies and new equipment in petroleum production engineering have been proposed under the guidance of the management mode, achieving great social and economic benefits.

The Advanced Manufacture Theory and Practice Based on the Management Science

The paper points out that the science and technology, social productivity and economic form are the decisive strengths in facilitating the reformation of the production method of the manufacturing industry. This kind of strength happens through making an influence on the theory of management and science. It analyses the stage and the characteristic of the development model of manufacturing industry of human society, and on this basis does the detailed research on the several patterns of the advanced manufacturing theory and practice： the computer integrated making, concurrent engineering, lean production, agile manufacturing, planning of enterprise resources, global manufacturing. Finally, it thinks that the development model of the advanced manufacture theory and practice embodies a continuous curve of the technical innovation, which is on the basis of the theory of management science.

HOW ARE PRODUCT-SERVICE COMBINED OFFERS PROVIDED IN GERMANY AND ITALY?ANALYSIS WITH COMPANY SIZES AND COUNTRIES

A new business concept that offers products and services in a different way of traditional product-sales businesses is getting more attention especially in manufacturing industries. This paper investigates how this new business by means of integration of products and services is achieved in Germany and Italy. In addition, it analyzes the differences according to the company sizes. The results include that this type of business is in many cases motivated by their focus on customers and often consists of physical products and their maintenance. The Italian companies, as opposed to the German ones, often design their physical products specifically for this type of offers. From the analysis based on the size difference, small companies are found to achieve specific design for this type of offers while owning physical products. There do not seem to be any established methods or tools developed to support the development of such offers and within such methods/tools there would be room for more adaptation in form of physical product design.

Engineered Production of Bioactive Natural Products from Medicinal Plants

Plant natural products have been particularly important due to their use in food, cosmetic, and pharmaceutical industries. In particular, Traditional Chinese Medicine provides a precious potential for the discovery of bioactive natural products and development of novel modern medicines. However, the existing production methods for plant natural products such as chemical synthesis and plant extraction does not meet the current demand. Due to their environmental and economic concerns, engineered production of valuable natural products in microbial hosts has become an attractive alternative platform. This review covers the recent advances in the engineered production of plant natural products in microorganisms. A special focus was placed on the biotechnological production of plant-derived terpenoids, flavonoids, and alkaloids. Some successful examples of engineered production of plant natural products(or their precursors) such as artemisinin, paclitaxel, naringenin, quercetin, berberine, and noscapine are summarized. This clearly indicates that the engineered production method is a promising approach with various advantages over current methods.